HD5-8690BBarcode Scanner

8690i RFID Mini Wearable Mobile Computer Quick Start Guide 8690i-EN-QS-01 Rev A 11/20
 1 Out of the Box Make sure that your shipping box contains these items: •Honeywell 8690i Mini Wearable Mobile Computer •Rechargeable battery •Product Documentation If you ordered accessories for your device, verify that they are also included with the order. Be sure to keep the original  packaging in case you need to return the device for service. 2 Device Features Right  button Left  button User window Battery Scanner Scanner  button Finger Strap Wearable accessory release buttons Battery release buttons Right  button Left  button User window Battery Scanner Scan Trigger Finger Strap Wearable accessory release buttons Battery release buttons 3 Charging the Battery The 8690i mini wearable mobile computer ships with a partially charged battery. The battery must be fully charged before first use. The following charging stations are available for the device and must be purchased separately: •MB4-BAT-SCN07 •MB4-SCN07 •MB4A-SCN07 •MB12-BAT-SCN07 •MB12-SCN07 •MB12A-SCN07 We recommend the use of Honeywell accessories and power adapters. Use of non-Honeywell accessories or power adapters may cause damage not covered by the warranty. Ensure all components are dry prior to mating the computers and batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty. 4 Install the Battery The device ships with a 3.7V, 3400 mAh battery  manufactured by Honeywell International Inc. Use only Honeywell battery model BAT-SCN07. 5 Replace the Battery Note:The battery should be replaced in an environment free from excessive dust or particulate to avoid an internal buildup of dust in the unit. When the battery is low, the 8690i beeps and vibrates and the window shows a Battery Low warning. You can also press both the right and left buttons at any time to view the battery’s charge status. To replace the battery, squeeze the battery latch and lift up on the battery. Replace the battery by aligning with the side of device and  snapping it in to the device. 6 Right or Left Handed Operation To release the finger trigger, turn over the device. Press the two release buttons on either side of the trigger. Rotate the trigger and snap it into place to change the operation to the correct hand. 180º 7 Attach the Device to Your Fingers 8 Pull the free end through the loop the press the excess down to secure the strap. 9 Power Up the Device Press the trigger to power up the device. The battery, WiFi, and Bluetooth status appear in the window. User Window The user window displays prompts for using the device in your environment. The buttons to the left and right of the window are used to scroll through the windows or to enter responses to screen prompts. •Press both the right and left buttons at the same time to view the WiFi, Bluetooth, and battery status. •Press and hold the left button for 6 seconds to restart the device. 95% 10 Wrist Position When Scanning How to Scan a Bar Code The 8690i scanner has a view finder that projects a bright aim- ing pattern. This aiming pattern should be centered over the bar code, but it can be positioned in any direction for a good read. ! Warning: Do not stare directly into the laser beam. 11 Connect the Device via Bluetooth® Pair with a PC or Laptop Bluetooth Serial Port: Host Reconnect Mode The 8690i can pair with host Bluetooth devices such as personal computers, laptops, and tablets. In this mode, the host will  continually attempt to connect with the device. If the device and the host become disconnected, the host will manage the recon- nection. 1.Scan the Host Reconnect Mode bar code, below. 2.Set your host device so it searches for other Bluetooth devices. (Refer to your host device’s User’s Guide for pairing instructions.) 3.When your host device has located the 8690i, you can select it from the list displayed. Note:Refer to the 8690i User’s Guide if your host device displays a PIN. The Bluetooth symbol appears in the device window when the device pairs with a host. Host Reconnect Mode 12 Pair with a PC or Laptop Bluetooth: HID Keyboard Mode In this mode, the 8690i pairs with a Bluetooth device using a HID keyboard. 1.Scan the Bluetooth HID Keyboard Connect bar code below. 2.Set your host device so it searches for other Bluetooth devices. (Refer to your host device’s User’s Guide for pairing instructions.) 3.When your host device has located the 8690i, you can select it from the list displayed. Note:Refer to the 8690i User’s Guide if your host device displays a PIN. The Bluetooth symbol appears in the device window when the device pairs with a host. Bluetooth HID Keyboard Connect 13 Disconnect from the Host Once your device has been connected to a host, you must dis- connect it in order to communicate with a different device. Scan the Bluetooth Disconnect bar code to unlink the device from the currently linked host. Pair with an Android™ Mobile Device Tap and Pair You can pair your Android™ phone with the 8690i by touching the devices together. 1.Make sure the NFC setting is On in your phone. 2.Touch the Android phone to the device. 3.The phone recognizes the device and prompts you to pair. 4.Verify the pairing of the 8690i in your phone’s Bluetooth settings. Bluetooth Disconnect 14 Pair with an Android, Apple™ or Windows® Mobile Device The 8690i can pair with Android, Apple, and Windows mobile devices, excluding Windows CE and Mobile. 1.Set your mobile device so it searches for other Bluetooth devices. (Refer to your mobile device’s User’s Guide for pair- ing instructions.) 2.Scan the Bluetooth HID Keyboard Connect bar code below. 3.On the mobile device, the 8690i device is shown as a keyboard. Click on it to pair. The Bluetooth symbol appears in the device window when the device pairs with a mobile device. Bluetooth HID Keyboard Connect 15 Pair with a Honeywell Vehicle Mount Computer The 8690i can pair with Honeywell vehicle mount computer…

Text truncated - open the document above for the full version.

Non-SDR-Statement Federal Communications Commission Authorization and Evaluation Division ATTESTATION FCC ID: HD5-8690B Product: Barcode Scanner Model: 8690i Regarding the SDR application guide (KDB442812 D01 SDR Apps Guide v02r03), our answer to the following five questions can be used for determining our device is not an SDR: 1. Can the RF parameters of the device be altered through software? Yes. 2. Can third parties not permitted by the Commission through specific filings modify, configure, or load different software, or make configuration settings to operate the device or host hardware radio frequency parameters (frequency range, modulation type, maximum output power or other radio parameters) in any other way than granted (or expected to be granted)? No. 3. Is the device capable of operating in any other in any other way than granted, or will be, granted? No. 5. Does the manufacturer elect SDR? No. Sincerely, Signature： Mandana Salahshour Global Regulatory Compliance Manager Notes:Required for FCC & IC application Honeywell International Inc Honeywell Sensing & Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA Date: 2022-06-10

RF_160, Issue 04 HONEYWELL INTERNATIONAL INC Declaration of Authorization We Name: < HONEYWELL INTERNATIONAL INC > Address: 9680 Old Bailes Rd, Fort Mill, SC 29707-7539, USA .... City: ... Fort Mill ............................................................. Country: ...... USA ............................................................. Declare that: Name Representative of agent: ... Lisa Jing........... (1) Agent Company name: ... DEKRA Testing and Certification (Suzhou) Co., Ltd........... Address: ... No.99 Hongye RD.Suzhou Industrial Park, Suzhou China ........... City: ... Suzhou ........... Country ... China .......... is authorized to apply for Certification of the following product(s): Product description: ...Barcode Scanner ................ Type designation: ... 8690i................................................. Trademark: ... Honeywell ................................................. Validity/ expiry date on our behalf. Date: ...2022/06/10............................. City: ... Fort Mill ............................. Name: ... Mandana Salahshour ............................. (2) Function: ......Global Regulatory Compliance Manager......................... Signature: ............................... Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 21-Nov-2018 RF_501, Issue 8 Page 1 of 1 Company Name: HONEYWELL INTERNATIONAL INC Address : 9680 Old Bailes Rd, Fort Mill, SC 29707-7539, USA City: Fort Mill Country: USA To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: HD5-8690B Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, a pplicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Date: 2022/06/10 Name and signature of applicant: Mandana Salahshour Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2231093R-RF-External Photo Page 1 / 4 External Photographs (1) EUT Photo (2) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2231093R-RF-External Photo Page 2 / 4 (3) EUT Photo (4) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2231093R-RF-External Photo Page 3 / 4 (5) EUT Photo (6) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2231093R-RF-External Photo Page 4 / 4 (7) EUT Photo (8) EUT Photo

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2190372R-RF-Internal Photo Page 1 / 8 Internal Photographs (1) EUT Photo (2) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2190372R-RF-Internal Photo Page 2 / 8 (3) EUT Photo (4) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2190372R-RF-Internal Photo Page 3 / 8 (5) EUT Photo (6) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2190372R-RF-Internal Photo Page 4 / 8 (7) EUT Photo (8) EUT Photo(BT&WIFI Module) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2190372R-RF-Internal Photo Page 5 / 8 (9) EUT Photo (10) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2190372R-RF-Internal Photo Page 6 / 8 (11) EUT Photo (12) EUT Photo （NFC Chip） DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2190372R-RF-Internal Photo Page 7 / 8 (13) EUT Photo （RFID Chip） (14) EUT Photo （BT&WIFI Antenna） DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2190372R-RF-Internal Photo Page 8 / 8 (15) EUT Photo （BT&WIFI Antenna） (16) EUT Photo （BT&WIFI Antenna）

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 2231093R-RF-US-P06V05 TEST REPORT FCC Rules&Requlations 47 CFR Chapter I - Part 15C Product Name Barcode Scanner Trademark Honeywell Model and /or type reference 8690i FCC ID HD5-8690B Applicant’s name / address HONEYWELL INTERNATIONAL INC Honeywell Safety and Productivity Solutions 9680 OLD BAILES RD FORT MILL SC 29707-7539,USA Test method requested, standard FCC CFR Title 47 Part 15 Subpart C Section 15.225 Verdict Summary IN COMPLIANCE Documented by (name / position & signature) Tim Cao/Project Engineer Approved by (name / position & signature) Jack Zhang/ Supervisor Date of issue 2022-06-07 Report template No Template_FCC 15.225-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2231093R-RF-US-P06V05 Page 2 / 37 INDEX page Competences and Guarantees ................................................................................................................................... 4 General conditions ...................................................................................................................................................... 4 Environmental conditions............................................................................................................................................ 4 Possible test case verdicts ......................................................................................................................................... 5 Abbreviations .............................................................................................................................................................. 5 Document History ....................................................................................................................................................... 6 Remarks and Comments ............................................................................................................................................ 6 Used Equipment ......................................................................................................................................................... 7 Uncertainty .................................................................................................................................................................. 8 1 General Information ........................................................................................................................................... 9 1.1 General Description of the Item(s) .......................................................................................................... 9 2 Description of Test Setup ................................................................................................................................ 10 2.1 Operating mode(s) used for tests.......................................................................................................... 10 2.2 Support / Auxiliary equipment / unit / Test software for the EUT .......................................................... 10 2.3 Test Configuration / Block diagram used for tests ................................................................................ 11 2.4 Testing process ..................................................................................................................................... 12 3 Verdict summary section ................................................................................................................................. 13 3.1 Standards .............................................................................................................................................. 13 3.2 Overview of results ................................................................................................................................ 13 3.3 Test Facility ........................................................................................................................................... 14 4 Test Results ..................................................................................................................................................... 15 4.1 AC Power Line Conducted Emission .................................................................................................... 15 4.1.1 Limit ............................................................................................................................................. 15 4.1.2 Test Setup ................................................................................................................................... 15 4.1.3 Test Procedure ........................................................................................................................... 15 4.1.4 Test Data..................................................................................................................................... 16 4.2 E-field Emission..................................................................................................................................... 18 4.2.1 Limit ............................................................................................................................................. 18 4.2.2 Test Setup ................................................................................................................................... 18 4.2.3 Test Procedure ........................................................................................................................... 18 4.2.4 Test Data..................................................................................................................................... 19 4.3 Radiated Emissions .....................…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2230193R-RF-US-Test Photo Page 1 / 5 FCC Test Photographs Description: Radiated emission Below 1GHz Description: Radiated emission 1-18GHz DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2230193R-RF-US-Test Photo Page 2 / 5 Description: Radiated emission Above 18GHz Description: AC Power Line Conducted Emission DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2230193R-RF-US-Test Photo Page 3 / 5 Description: SAR Test-Back Description: SAR Test-Bottom DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2230193R-RF-US-Test Photo Page 4 / 5 Description: SAR Test-Top Description: SAR Test-Front DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2230193R-RF-US-Test Photo Page 5 / 5 Description: SAR Test-Left Description: SAR Test-Reght