HD5-CCBH01BCharger Cradle

Xenon™ XP 1952g/1952g-BF CCB01-010BT/CCB01-010BT-BF CCB-H-010BT/CCB-H-010BT-BF Cordless Area-Imaging Scanner and Charge Bases Quick Start Guide 1952-52BF-EN-QS-01 Rev A 04/19 1 Agency Model: 1952, 1952-BF, CCB01-010BT, CCB01-010BT-BF, CCB-H-010BT, CCB-H-010BT-BF Note:Refer to your User Guide for information about cleaning your device. Getting Started Turn off computer’s power before connecting the scanner, then power up the computer once the scanner is fully connected. When the base is connected and powered up, put the scanner in the base to establish a link. The green LED on the base flashes to indicate the scanner’s battery or charge pack is charging. Power Supply Assembly (if included) Note:The power supply must be ordered separately, if needed. 2 Connecting the Scanner USB: Note:If you are charging the scanner using the USB cable, the current available for charging is reduced and charge times are increased. Charging via the power supply is faster. CCB-H-010BT or CCB-H-010BT-BF Base: CCB01-010BT or CCB01-010BT-BF Base: 3 Keyboard Wedge: CCB-H-010BT or CCB-H-010BT-BF Base: CCB01-010BT or CCB01-010BT-BF Base: 4 RS232 Serial Port: CCB-H-010BT or CCB-H-010BT-BF Base: CCB01-010BT or CCB01-010BT-BF Base: 5 RS485: CCB-H-010BT or CCB-H-010BT-BF Base: CCB01-010BT or CCB01-010BT-BF Base: 6 Reading Techniques The view finder projects an aiming beam that should be centered over the bar code, but it can be positioned in any direction for a good read. Note:If the scanner beeps 3 times when scanning a bar code, the link has not been established. If the scanner beeps once, the link has been established. Standard Product Defaults The following bar code resets all standard product default set- tings. Standard Product Defaults 7 RS485 Interface The RS485 interface defaults to port 5B. If you have an IBM POS terminal using port 9B, scan the appropriate code below to pro- gram the terminal, then power cycle the cash register. Note:For additional RS485 interface selections, see the User Guide for your product. USB Serial Scan the following code to program the scanner to emulate a regular RS232-based COM Port. Apple® Macintosh computers recognize the scanner as a USB CDC class device and automati- cally use a class driver. Note:No extra configuration (e.g., baud rate) is necessary. If you are using a Microsoft® Windows® PC, you must download a driver from the Honeywell website. The driver will use the next available COM Port number. IBM Port 9B HHBCR-1 Interface IBM Port 9B HHBCR-2 Interface USB Serial 8 USB PC Keyboard Scan the following code to program the scanner for a USB PC Keyboard. Keyboard Country Scan the appropriate country code below to program the key- board layout for your country or language. By default, national character replacements are used for the following characters: #$@[\]^‘{|}~ Refer to the ISO 646 Character Replacements chart in your User Guide to view the character replacements for each country. USB PC Keyboard USA (Default) Belgium Denmark Finland 9 Note:For a complete list of country codes, see the User Guide for your product. France Germany/Austria Great Britain Italy Norway Spain Switzerland 10 Locked Link If you link a scanner to a base using the Locked Link Mode, other scanners are blocked from being linked if they are inad- vertently placed into the base. If you do place a different scan- ner into the base, it will charge the scanner, but the scanner will not be linked. To use a different scanner, you need to unlink the original scan- ner by scanning the Unlink Scanner bar code. Override Locked Scanner If you need to replace a broken or lost scanner that is linked to a base, scan the Override Locked Scanner bar code with a new scanner, and place that scanner in the base. The locked link will be overridden; the broken or lost scanner’s link with the base will be removed, and the new scanner will be linked. Locked Link Mode (Single Scanner) Override Locked Scanner 11 Unlinking the Scanner If the base has a scanner linked to it, that scanner must be unlinked before a new scanner can be linked. Once the previous scanner is unlinked, it will no longer communicate with the base. Scan the Unlink Scanner bar code to unlink a scanner. Trigger The following bar codes will allow you to use the scanner in Manual Trigger - Normal Mode (need to press the trigger to read) or Presentation mode (the scanner is activated when it “sees” a bar code). Note:Presentation Mode continuously draws power, so use of the external power supply is recommended for this mode. Unlink Scanner Manual Trigger - Normal (Default) Presentation Mode 12 Streaming Presentation™ When in Streaming Presentation mode, the scanner leaves the scan illumination on all the time and continuously searches for bar codes. Suffix If you want a carriage return after the bar code, scan the Add CR Suffix bar code. To add a tab after the bar code, scan the Add Tab Suffix bar code. Otherwise, scan the Remove Suffix bar code to remove the suffixes. Streaming Presentation Mode Add CR Suffix Add Tab Suffix Remove Suffix 13 Add Code ID Prefix to all Symbologies Scan the following bar code if you wish to add a Code ID prefix to all symbologies at once. Note: For a complete list of Code IDs, see the User’Guide for your product. Function Code Transmit When this selection is enabled and function codes are con- tained within the scanned data, the scanner transmits the func- tion code to the terminal. Charts of these function codes are provided in your User Guide. When the scanner is in keyboard wedge mode, the scan code is converted to a key code before it is transmitted. Add Code ID Prefix To All Symbologies (Temporary) Enable (Default) Disable 14 Charge Pack Status - Xenon XP 1952g-BF only The following charge status feedback is provided by a Xenon XP 1952g-BF scanner when the scanner is out of the base and has been idle for 5 seconds. EZConfig-Scanning To access additional features for the scanner, use EZConfig- Scanning, an online configura…

Text truncated - open the document above for the full version.

Page 1 CCB-H-ML-RS-01 Rev (a) CCB-H-010BT and CCB-H-010BT-BF Charge and Communication Base Agency Model: CCB-H-010BT, CCB-H-010BT-BF Product documentation is available at www.honeywellaidc.com. La documentation sur le produit est disponible à www.honeywellaidc.com. La documentation du produit est disponible sur le site www.honeywellaidc.com. La documentazione sul prodotto è disponibile sul sito www.honeywellaidc.com. Die Produktdokumentation ist unter www.honeywellaidc.com verfügbar. La documentación del producto está disponible en www.honeywellaidc.com. La documentación del producto está disponible en www.honeywellaidc.com. A documentação do produto está disponível em www.honeywellaidc.com. ❡ᄩ俒咓霼⿬錛 www.honeywellaidc.comկ 欴ᄩ俒⟝꧌锞⿮鋅 www.honeywellaidc.com כزًُٝؗس醡ᄩ www.honeywellaidc.com ד ⵃ欽〳腉ׅדկ 헪컲졓컪쁢 www.honeywellaidc.com 펞 컪핆쿦핖킃삖삲 . Документацию по изделию можно найти на сайте www.honeywellaidc.com. Ürün belgelerine www.honeywellaidc.com adresinden ulaşılabilir. ر وثائق المن ج عل الموقع ّتوف ال ال .www.honeywellaidc.com תיעוד המוצר זמין בכתובת www.honeywellaidc.com. Publicly downloadable certificates are available at www.honeywellaidc.com/ compliance. Les certificats téléchargeables accessibles au public sont disponibles à www.honeywellaidc.com/ compliance. Les certificats téléchargeables publiquement sont disponibles sur www.honeywellaidc.com/ compliance. I certificati pubblicamente scaricabili sono disponibili sul sito Web www.honeywellaidc.com/ compliance. Zertifikate stehen unter www.honeywellaidc.com/ compliance öffentlich zum Download zur Verfügung. Hay certificados descargables disponibles públicamente en www.honeywellaidc.com/ compliance. Puede descargar los certificados de acceso público en www.honeywellaidc.com/ compliance. Certificados disponíveis ao público para download em: www.honeywellaidc.com/ compliance. 㥵꨽Ⱆ䒓♴鲿涸霆⛼霼霄꡼ www.honeywellaidc.com/ complianceկ 㥶꨾〳ⰗꟚ♴鯺涸阮剅锞鸤鏞 www.honeywellaidc.com/ compliance 鏾僇剅ז〳腉س٦ٗٝؐتח♧菙 כծwww.honeywellaidc.com/ compliance דⵃ欽〳腉ׅדկ 뫃맪헏픊옪삲풂옪슪많쁳핆흫컪쁢 www.honeywellaidc.com/ compliance 펞컪묺쿦핖킃삖삲 .       www.honeywellaidc.com/ compliance. Halkın indirebileceği sertifikalar şu adreste mevcuttur: www.honeywellaidc.com/ compliance. الشهادات القابلة لل نزيل م احة للعامة عل الموقع www.honeywellaidc.com/ compliance. אישורים להורדה עבור הצבור זמינות בכתובת www.honeywellaidc.com/ compliance FCC Part 15 Subpart B Class B This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio or television technician for help. If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. Honeywell International Inc. is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Honeywell International Inc.. The correction is the responsibility of the user. RF Exposure The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter. IC RF Radiation Exposure This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. Déclaration d'exposition aux radiations Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. TÜV R Statement TÜV R listed: UL 60950-1, Second Edition and CSA C22.2 No.60950-1-07, Second Edition. Normes TÜV R Homologué TÜV R : UL 60950-1, seconde édition et CSA C22.2 No. 60950-1-07, seconde édition. Caution: Any changes or modifications made to this equipment not expressly approved by Honeywell International Inc. may void the authorization to operate this equipment. Mise en garde : Toute modification apportée à cet équipement ou l’usage de tout périphérique ou accessoire qui ne sont pas expressément approuvés par Honeywell International Inc. peut annuler l’autorisation d’utiliser cet équipement. Mise en garde : tous les changements ou les modifications apportés à cet équipement ou toute utilisation de périphériques ou accessoires non expressément approuvés par Honeywell International Inc. peuvent annuler l’autorisation d’utiliser cet équipement. Attenzione: qualsiasi variazione o modifica apportata a questa apparecchiatura, oppure qualsiasi utilizzo di qualsiasi periferica o accessorio, non espressamente approvati da Honeywell International Inc., potrebbero annullare l'autorizzazione concessa all'utente per utilizzare l'apparecchiatura. Vorsicht: Veränderungen an diesem Gerät sowie die Verwendung von Peripheriegeräten und Zubehör ohne ausdrücklic…

Text truncated - open the document above for the full version.

RF_160, Issue 04 HONEYWELL INTERNATIONAL INC Declaration of Authorization We Name: < HONEYWELL INTERNATIONAL INC > Address: 9680 Old Bailes Rd, Fort Mill, SC 29707-7539, USA . City:  Fort Mill . Country:  USA . Declare that: Name Representative of agent: ...Lisa Jing........... (1) Agent Company name:  DEKRA Testing and Certification (Suzhou) Co., Ltd.. Address:  No.99 Hongye RD.Suzhou Industrial Park, Suzhou China .. City:  Suzhou .. Country  China . is authorized to apply for Certification of the following product(s): Product description:  Charger Cradle . Type designation:  CCB-H-010BT . Trademark:  Honeywell . Validity/ expiry date on our behalf. Date: 2022/09/27.. City:  Fort Mill .. Name:  Mandana Salahshour .. (2) Function: ......Global Regulatory Compliance Manager......................... Signature: .... Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 21-Nov-2018 RF_501, Issue 8 Page 1 of 1 Company Name: HONEYWELL INTERNATIONAL INC Address: 9680 Old Bailes Rd, Fort Mill, SC 29707-7539, USA City: Fort Mill Country: USA To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: HD5-CCBH01B Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Date: 2022/09/27 Name and signature of applicant: Mandana Salahshour Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2280540R-RF-External Photo Page 1 / 3 External Photographs (1) EUT Photo (2) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2280540R-RF-External Photo Page 2 / 3 (3) EUT Photo (4) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2280540R-RF-External Photo Page 3 / 3 (5) EUT Photo (6) EUT Photo

50149823-013(US &Canada only)

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2280540R-RF-Internal Photo Page 1 / 3 Internal Photographs (1) EUT Photo (2) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2280540R-RF-Internal Photo Page 2 / 3 (3) EUT Photo (4) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2280540R-RF-Internal Photo Page 3 / 3 (5) EUT Photo

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Designation Number: CN1199 Test report No: 2280540R-RF-US-P20V01 FCC Exposure TEST REPORT Product Name Charger Cradle Trademark Honeywell Model and /or type reference CCB-H-010BT FCC ID HD5-CCBH01B Applicant ́s name / address HONEYWELL INTERNATIONAL INC Honeywell Safety and Productivity Solutions 9680 OLD BAILES RD FORT MILL SC 29707-7539,USA Test method requested, standard KDB 447498 D04V01 FCC Part1.1310 Verdict Summary IN COMPLIANCE Documented by (name / position & signature) Tim Cao/Project Engineer Approved by (name / position & signature) Jack Zhang/ Manager Date of issue 2022-10-17 Report Version V1.1 Report template No Template_FCC MPE-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Designation Number: CN1199 Report no.: 2280540R-RF-US-P20V01 Page 2 / 8 INDEX page Competences and Guarantees ..............................................................................................................................3 General conditions ................................................................................................................................................3 Environmental conditions ......................................................................................................................................3 Possible test case verdicts ....................................................................................................................................4 Abbreviations ........................................................................................................................................................4 Document History .................................................................................................................................................5 Remarks and Comments ......................................................................................................................................5 1. RF Exposure Evaluation....................................................................................................................................6 1.1. Limits .............................................................................................................................................................6 1.2. Test Procedure ..............................................................................................................................................7 1.3. Test Result of RF Exposure Evaluation ..........................................................................................................7 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Designation Number: CN1199 Report no.: 2280540R-RF-US-P20V01 Page 3 / 8 COMPETENCES AND GUARANTEES DEKRA is a testing laboratory competent to carry out the tests described in this report. In order to assure the traceability to other national and international laboratories, DEKRA has a calibration and maintenance program for its measurement equipment. DEKRA guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated in the report and it is based on the knowledge and technical facilities available at DEKRA at the time of performance of the test. DEKRA is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA. GENERAL CONDITIONS Test Location No. 99, Hongye Road, Suzhou Industrial Park Suzhou, 215006, P.R. China Date(receive sample) Aug. 17, 2022 Date (start test) Aug. 25, 2022 Date (finish test) Sep. 08, 2022 1. This report is only referred to the item that has undergone the test. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or Competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA. ENVIRONMENTAL CONDITIONS The climatic conditions during the tests are within the limits specified by the manufacturer for the operation of the EUT and the test equipment. The climatic conditions during the tests were within the following limits: Ambient temperature 15 °C – 35 °C Relative Humidity air 30% - 60% If explicitly required in the basic standard or applied product / product family standard the climatic values are recorded and documented separately in this test report. DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Designation Number: CN1199 Report no.: 2280540R-RF-US-P20V01 Page 4 / 8 POSSIBLE TEST CASE VERDICTS Test case does not apply to test object N/A Test object does meet requirement P (Pass) / PASS Test object does not meet requirement F (Fail) / FAIL Not measured N/M ABBREVIATIONS For the purposes of the present document, the following abbreviations apply: EUT : Equipment Under Test QP : Quasi-Peak CAV : CISPR Average AV : Average CDN : Coupling Decoupling Network SAC : Semi-Anech…

Text truncated - open the document above for the full version.

Antenna Specification Description Value Part Number ANT1608LL14R2400A Antenna Type Ceramic Chip Antenna Working Frequency 2.4~2.484GHz Polarization Linear Azimuch Beamwidth Omni-directional Peak Gain -1 dBi (Max.) Impedance 50 Ω Operating Temperature -40~105 °C Antenna Dimensions Radiated Pattern

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 2280540R-RF-US-P06V01 FCC TEST REPORT Product Name Charger Cradle Trademark Honeywell Model and /or type reference CCB-H-010BT FCC ID HD5-CCBH01B IC 1693B-CYBT3027 Applicant ́s name / address HONEYWELL INTERNATIONAL INC Honeywell Safety and Productivity Solutions 9680 OLD BAILES RD FORT MILL SC 29707-7539,USA Test method requested, standard FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10: 2013 KD558074 D01 15.247 Meas Guidance v05r02 RSS-Gen Issue 5 /RSS-247 Issue 2 Verdict Summary IN COMPLIANCE Tested by (name / position & signature) Tim Cao/Project Engineer Approved by (name / position & signature) Jack Zhang/ Manager Date of issue 2022-10-08 Report Version V1.1 Report template No Template_FCC 15.247-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2280540R-RF-US-P06V01 Page 2 / 66 INDEX page General conditions ...................................................................................................................................................... 5 Environmental conditions ............................................................................................................................................ 5 Possible test case verdicts .......................................................................................................................................... 6 Abbreviations .............................................................................................................................................................. 6 Document History ....................................................................................................................................................... 7 Remarks and Comments ............................................................................................................................................. 7 Used Equipment ......................................................................................................................................................... 8 Uncertainty ............................................................................................................................................................... 10 1 General Information.......................................................................................................................................... 11 1.1 General Description of the Item(s) .......................................................................................................... 11 1.2 Antenna Information ............................................................................................................................... 12 1.3 Channel List ........................................................................................................................................... 13 2 Description of Test Setup ................................................................................................................................. 14 2.1 Operating mode(s) used for tests ............................................................................................................ 14 2.2 Auxiliary equipment / Test software for the EUT ...................................................................................... 14 2.3 Test Configuration / Block diagram used for tests ................................................................................... 15 2.4 Testing process ...................................................................................................................................... 16 3 Verdict summary section .................................................................................................................................. 17 3.1 Standards............................................................................................................................................... 17 3.2 Deviation(s) from the Standard(s) / Test Specification(s) ......................................................................... 17 3.3 Overview of results ................................................................................................................................. 18 3.4 Test Facility ............................................................................................................................................ 20 4 Test Results ..................................................................................................................................................... 21 4.1 Conducted Emission............................................................................................................................... 21 4.1.1 Limit ............................................................................................................................................. 21 4.1.2 Test Setup .................................................................................................................................... 21 4.1.3 Test Procedure ............................................................................................................................. 21 4.1.4 Test Data ..................................................................................................................................... 22 4.2 Emissions in restricted frequency bands ................................................................................................. 24 4.2.1 Limit ............................................................................................................................................. 24 4.2.2 Test Setup ..........................................................................…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2280540R-RF-US-Test Photo Page 1 / 3 FCC Test Photographs Description: AC Line conducted emission Description: AC Line conducted emission DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2280540R-RF-US-Test Photo Page 2 / 3 Description: Radiated emission Below 1GHz Description: Radiated emission 1-18GHz DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2280540R-RF-US-Test Photo Page 3 / 3 Description: Radiated emission Above 18GHz