HD5-CT40PL0NMobile Computer

CT40 Series powered by Android™ Quick Start Guide CT40-A-EN-QS-01 Rev E 06/20
  1 Out of the Box Make sure that your shipping box contains these items: • Mobile Computer Model CT40-L0N, CT40-L1N, CT40P-L0N, or CT40P-L1N • Rechargeable Li-ion battery (see page 7) • Hand strap • Product documentation If you ordered accessories for your mobile computer, verify that they are also included with the order. Be sure to keep the original packaging in case you need to return the mobile computer for service. Note:CT40-L0N/CT40P-L0N models do not include a WWAN radio. Memory Card Specifications Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD™ or microSDHC™ memory cards with mobile computers for maximum performance and durability. Contact a Honeywell sales representative for additional information on qualified memory card options. 2 Mobile Computer Features Microphone Power Button Battery Status/ Notification LED Speaker Touch Panel Scan Button Microphone Speaker Scan Status LED Scan Button Imager Window (LED/Laser Aperture) Push-to-Talk Button (model dependent) Front Facing Camera (model dependent) 3 Note:Hand strap not shown. Scan Button Volume Button Camera Lens and Flash Laser Safety Label Location SIM Card Door MicroSD Card Door I/O Connector Audio Jack Pin (model dependent) USB, Type C (model dependent) BLE port In (model dependet) BLE Speaker Out (model dependent) 4 Battery Latch (Models CT40-L0N-xxxxxAx, CT40-xxx-xxxxxBx, CT40-xxx-xxxxxHx, CT40P-L0N-xxxxxAx, CT40P-xxx-xxxxxBx, CT40P-xxx-xxxxxHx) Battery (Refer to page 7) Battery Latch (Model CT40-xxx-xxxxx0x) 5 Install a microSD Card (Optional) Note:Format the microSD card before initial use. Note:Always power off the computer before attempting to install or remove a card. 3 4 1 5 2 6 Install a microSIM Card Note:Phone feature is only available on CT40-L1N/CT40P-L1N models. On all models, the SIM slot supports use of a UICC card for NFC Secure Element NFC link encryption. Note:Always power off the computer before attempting to install or remove a card. 3 4 1 5 2 7 About the Battery The mobile computer ships with a Li-ion battery manufactured for Honeywell International Inc. Model ConfigurationBattery P/NPower CT40-xxx-xxxxx0x318-005-011 3.8 VDC, 15.5 watt-hour CT40-xxx-xxxxxHx318-055-017 3.8 VDC, 15.5 watt-hour CT40-LON-xxxxxAx 318-055-015 3.85 VDC, 15.5 watt-hour CT40-xxx-xxxxxBx CT40P-xxx-xxxxxHx TBD 3.85 VDC, 15.5 watt-hour CT40P-L0N-xxxxxAx 318-055-067 3.85 VDC, 15.5 watt-hour CT40P-xxx-xxxxxBx Configuration number (CN) is located on the label in the battery well of the mobile computer. We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. Nous recommandons l’utilisation de batteries Li-ion de la marque Honeywell. L’utilisation d’une batterie d’un autre fabricant est susceptible de provoquer des dommages non couverts par la garantie. Ensure all components are dry prior to placing the battery in the computer. Mating wet components may cause damage not covered by the warranty. Assurez-vous que tous les composants sont secs avant d’insérer la batterie dans l’ordinateur. L’insertion de composants humides risque de provoquer des dommages non couverts par la garantie. 8 Install Battery (Model CT40-xxx-xxxxx0x) 3 4 5 1 2 9 Install Battery (Models CT40-LON-xxxxxAx, CT40-xxx-xxxxxBx, CT40-xxx-xxxxxHx, CT40P-L0N-xxxxxAx, CT40P-xxx-xxxxxBx, CT40P-xxx-xxxxxHx) 1 2 10 Install the Hand Strap 34 12 11 Charge the Mobile Computer The mobile computer ships with a partially charged battery. Charge the battery with a CT40 series charging device for a minimum of 4 hours. Using the computer while charging the battery increases the time required to reach a full charge. CT40 series mobile computers are designed for use with the following CT40 charging accessories: HomeBase, Ethernet HomeBase, ChargeBase, NetBase, Quad Battery Charger, Vehicle Power Adapter, Vehicle Dock, and USB Adapter. We recommend the use of Honeywell accessories and power adapters. Use of any non-Honeywell accessories or power adapters may cause damage not covered by the warranty. Nous recommandons d’utiliser des accessoires et des adaptateurs secteur de marque Honeywell. L’utilisation de tout accessoire ou adaptateur secteur d’une autre marque est susceptible de provoquer des dommages non couverts par la garantie. Ensure all components are dry prior to mating the computers and batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty. Assurez-vous que tous les composants sont secs avant de raccorder les ordinateurs et les batteries à des périphériques. L’insertion de composants humides risque de provoquer des dommages non couverts par la garantie. 12 Turn Power On/Off The first time you power on the computer, a Welcome screen appears. You can either scan a configuration barcode or use the Wizard to manually set up the computer. Once setup is complete, the Welcome screen no longer appears on startup and Provisioning mode is automatically turned off (disabled). To turn the computer on: • Press and hold the Power button for approximately 3 seconds, and then release. To turn the computer off: 1. Press and hold the Power button until the options menu appears. 2. Touch Power Off. Battery Replacement Before removing the battery, always do one of the following: • Power off the computer. • Place the unit in Swap Battery mode (feature availability is model dependent). Swap Battery Mode Swap Battery mode places the computer in a low power state so that the battery can be removed for a short time. This feature is not available on all models. To activate Swap Battery mode: 13 1. Press and hold the Power button until the options menu appears. 2. Touch Swap Battery and follow the on-screen instructions. 3. Once you replace the battery, press the Power button. Sleep Mode Sleep mode automatically turns the touch panel display off and locks th…

Text truncated - open the document above for the full version.

Honeywell International Inc Honeywell Safety and Productivity Solutions 9680 Old Bailes Rd. Fort Mill, SC 29707 United States 9680 Old Bailes Rd. Fort Mill, SC 29707 United States ATTESTATION Date: July 20, 2020 Federal Communications Commission Authorization and Evaluation Division FCC ID: HD5-CT40PL0N Product: Mobile Computer Model: CT40P-L0N We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely, Name: Mandana Salahshour Position: Compliance Manager Honeywell International Inc Honeywell Safety and Productivity Solutions

Honeywell International Inc Honeywell Safety and Productivity Solutions 9680 Old Bailes Rd. Fort Mill, SC 29707 United States Client Declaration Letter Date: July 20, 2020 FCC ID: HD5-CT40PL0N We have declared below featured for device identified as (1) DFS Device —— Master, Client with Radar detection capability , Client without radar detection capability, N/A (2) Active / Passive Scanning , ad hoc mode access point capability (3) Country code selection capability to end user- Yes ， No If yes, pls explain how it was implemented: (pls also help to provide detail of options for each country selection) (4) Meet Part 15.202 requirement - Yes , No , * A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can’t be modified by end user or an installer. Apply No Apply (If apply, pls help to provide explanation on it was implement, and how software was controlled). Name: Mandana Salahshour Position: Compliance Manager Honeywell International Inc Honeywell Safety and Productivity Solutions Frequency Client Ad Hoc Mode Access point WiFi Direct WiFi Direct Band (MHz) Mode capability Capability Group Owner Group Client 2412 - 2462 Yes Yes Yes Yes Yes 5180 - 5240 Yes No No No No 5260 - 5320 Yes No No No No 5500 - 5720 Yes No No No No 5745 - 5825 Yes No No No No

Honeywell International Inc Honeywell Safety and Productivity Solutions 9680 Old Bailes Rd. Fort Mill, SC 29707 United States 9680 Old Bailes Rd. Fort Mill, SC 29707 United States Date: July 20, 2020 Federal Communications Commission Authorization and Evaluation Division FCC ID: HD5-CT40PL0N Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operational Description Turn-up Information The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and information will be available for public review once the grant of equipment authorization is issued. Sincerely, Name: Mandana Salahshour Position: Compliance Manager Honeywell International Inc Honeywell Safety and Productivity Solutions

Honeywell International Inc Honeywell Safety and Productivity Solutions 9680 Old Bailes Rd. Fort Mill, SC 29707 United States 9680 Old Bailes Rd. Fort Mill, SC 29707 United States Date: July 20, 2020 Federal Communications Commission Authorization and Evaluation Division FCC ID: HD5-CT40PL0N To Whom It May Concerm: This letter is to ascertain that the following information of applicant, product with model(s) have been the units used for conducting FCC compliance testing, the sDoC part will be tested by FCC recognized test lab. Product: Mobile Computer Model: CT40P-L0N If you have any question or concerns, pls. contact us. Signature: Name: Mandana Salahshour Position: Compliance Manager Honeywell International Inc Honeywell Safety and Productivity Solutions

Honeywell International Inc Honeywell Safety and Productivity Solutions 9680 Old Bailes Rd. Fort Mill, SC 29707 United States Non-SDR (Software Defined Radio) Cover Letter Date: July 20, 2020 Refer to KDB 442812 D01 SDR apps Guide v02r03. The following six questions can be used for determining if a radio can elect to be, or must be an SDR. 1. Can the RF parameters of the device be altered through software? Yes - go to 2. No, not an SDR Reply: Yes 2. Can third parties not permitted by the Commission through specific filings modify, configure, or load different software, or make configuration settings to operate the device or host hardware radio frequency parameters (frequency range, modulation type, maximum output power or other radio parameters) in any other way than granted (or expected to be granted)? Yes, must be an SDR. No - go to 3. Reply: No 3. Is the device capable of operating in any other in any other way Honeywell International Inc Honeywell Safety and Productivity Solutions 9680 Old Bailes Rd. Fort Mill, SC 29707 United States than granted, or will be, granted? Yes, - go to 4. No - go to 5. Reply: No 4. Is this a Part 15 client Device as defined in Section 15.202 (as opposed to a master device)? Yes, qualifies as a part 15 client devices - go to 5. No, must be an SDR. 5. Does the manufacturer elect SDR? Yes, elects to be an SDR. No, Not an SDR Reply: No Final conclusion: This product shall be approval as a Non-SDR which is declared by the applicant. Sign by: Print Name: Mandana Salahshour Title: Compliance Manager

Report No.: 2006RSU069-UE 1 of 8 EUT External Photo (1) EUT Photo (2) EUT Photo Report No.: 2006RSU069-UE (3) EUT Photo (4) EUT Photo Report No.: 2006RSU069-UE (5) EUT Photo (6) EUT Photo Report No.: 2006RSU069-UE (7) EUT Photo (8) EUT Photo Report No.: 2006RSU069-UE (9) EUT Photo (10) EUT Photo Report No.: 2006RSU069-UE (11) EUT Photo (12) EUT Photo Report No.: 2006RSU069-UE (13) EUT Photo (14) EUT Photo Report No.: 2006RSU069-UE (15) EUT Photo (16) EUT Photo

Honeywell International Inc Honeywell Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA Label Label Location

Report No.: 2006RSU069-UE 1 of 8 EUT Internal Photo (1) EUT Photo (2) EUT Photo Report No.: 2006RSU069-UE (3) EUT Photo (4) EUT Photo Report No.: 2006RSU069-UE (5) EUT Photo (6) EUT Photo Report No.: 2006RSU069-UE (7) EUT Photo (8) EUT Photo Report No.: 2006RSU069-UE (9) EUT Photo (10) EUT Photo Report No.: 2006RSU069-UE (11) EUT Photo (12) EUT Photo Report No.: 2006RSU069-UE (13) EUT Photo (14) EUT Photo Report No.: 2006RSU069-UE (15) EUT Photo

MRT Technology (Suzhou) Co., Ltd Report No.: 2006RU069-U8 Phone: +86-512-66308358 Report Version: V01 Web: www.mrt-cert.com Issue Date: 07-25-2020 Page Number: 1 of 104 FCC ID: HD5-CT40PL0N Applicant: Honeywell International Inc. Honeywell Safety and Productivity Solutions. Application Type: Certification Product: Mobile Computer Model No.: CT40P-L0N Brand Name: Honeywell FCC Rule Part(s): FCC 47 CFR Part 2.1093 Test Procedure(s): IEEE 1528:2013; IEEE C95.1- 2005; KDB 447498 D01v06; KDB 865664 D01v01r04; KDB 248227 D01v02r02; KDB 648474 D04v01r03 Test Date: July 9 ~ 20, 2020 SAR MEASUREMENT REPORT Reviewed By: ( Jame Yuan ) Approved By: ( Robin Wu ) The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in IEEE1528, KDB 447498 and KDB 865664. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. Report No.: 2006RSU069-U8 Page Number: 2 of 104 Revision History Report No. Version Description Issue Date Note 2006RSU069-U8 Rev. 01 Initial report 07-25-2020 Valid Report No.: 2006RSU069-U8 Page Number: 3 of 104 CONTENTS Description Page 1. Introduction ............................................................................................................................ 6 1.1. Scope ........................................................................................................................... 6 1.2. MRT Test Location ....................................................................................................... 6 2. Product Information ............................................................................................................... 7 2.1. General Description for EUT ......................................................................................... 7 2.2. Product Specification Subjective to this Report ............................................................. 8 2.3. Description of Available Antennas ................................................................................ 9 2.4. Ancillary Equipment ...................................................................................................... 9 3. Summary of Test Result ...................................................................................................... 10 3.1. Test Standards ........................................................................................................... 10 3.2. Environment Condition ............................................................................................... 10 3.3. RF Exposure Limits .................................................................................................... 10 3.4. Test Result Summary ................................................................................................. 11 4. Specific Absorption Rate (SAR).......................................................................................... 12 4.1. Introduction ................................................................................................................. 12 4.2. Definition .................................................................................................................... 12 5. DASY6 Measurement System ............................................................................................. 13 5.1. Introduction ................................................................................................................. 13 5.2. DASY6 Measurement System Diagram ...................................................................... 13 5.3. System Components Details ....................................................................................... 14 6. The SAR Measurement Procedure ..................................................................................... 25 6.1. Measurement Process Diagram.................................................................................. 25 6.2. Test Position Definition ............................................................................................... 26 6.3. Test Procedure ........................................................................................................... 29 7. System Verificaiton.............................................................................................................. 31 7.1. Tissue Check .............................................................................................................. 31 7.2. System Check ............................................................................................................ 34 8. Analysis and Results ........................................................................................................... 36 8.1. Antenna Location ........................................................................................................ 36 8.2. Conducted Power ....................................................................................................... 37 8.3. SAR Exclusion Analysis .............................................................................................. 43 8.4. Required Configurations of SAR Test ......................................................................... 53 Report No.: 2006RSU069-U8 Page Number: 4 of 104 8.5. SAR Test Results ....................................................................................................... 54 8.6. Estimated SAR Calculation ......................................................................................... 62 9. Simultaneous Transmission Analysis ................................................................................ 63 10. Test Equipment Used ............................................................…

Text truncated - open the document above for the full version.

MRT Technology (Suzhou) Co., Ltd Report No.: 2006RSU069-U3 Phone: +86-512-66308358 Report Version: V01 Web: www.mrt-cert.com Issue Date: 07-27-2020 Page Number: 1 of 68 FCC ID: HD5-CT40PL0N APPLICANT: Honeywell International Inc Honeywell Safety and Productivity Solutions Application Type: Certification Product: Mobile Computer Model No.: CT40P-L0N Brand Name: Honeywell FCC Classification: Digital Transmission System (DTS) FCC Rule Part(s): Part15 Subpart C (Section 15.247) Test Procedure(s): ANSI C63.10-2013 Test Date: July 07 ~ 27, 2020 MEASUREMENT REPORT FCC PART 15.247 / Bluetooth-LE Reviewed By: ( Jame Yuan ) Approved By: ( Robin Wu ) The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.10-2013. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. Report No.: 2006RSU069-U3 Page Number: 2 of 68 Revision History Report No. Version Description Issue Date Note 2006RSU069-U3 Rev. 01 Initial Report 07-27-2020 Valid Report No.: 2006RSU069-U3 Page Number: 3 of 68 CONTENTS Description Page 1. INTRODUCTION ..................................................................................................................... 6 1.1. Scope ........................................................................................................................... 6 1.2. MRT Test Location ....................................................................................................... 6 2. PRODUCT INFORMATION ..................................................................................................... 7 2.1. Feature of Equipment under Test ................................................................................. 7 2.2. Product Specification Subjective to this Report ............................................................. 7 2.3. Working Frequencies for this Report ............................................................................. 8 2.4. Test Mode .................................................................................................................... 8 2.5. Duty Cycle .................................................................................................................... 9 2.6. EMI Suppression Device(s)/Modifications ..................................................................... 9 2.7. Description of Test Software ......................................................................................... 9 2.8. Labeling Requirements ............................................................................................... 10 2.9. Test Environment Condition ........................................................................................ 10 3. DESCRIPTION OF TEST ....................................................................................................... 11 3.1. Evaluation Procedure .................................................................................................. 11 3.2. AC Line Conducted Emissions .................................................................................... 11 3.3. Radiated Emissions .................................................................................................... 12 4. ANTENNA REQUIREMENTS ................................................................................................ 13 5. TEST EQUIPMENT CALIBRATION DATE ............................................................................ 14 6. MEASUREMENT UNCERTAINTY ......................................................................................... 16 7. TEST RESULT ...................................................................................................................... 17 7.1. Summary .................................................................................................................... 17 7.2. 6dB Bandwidth Measurement ..................................................................................... 18 7.2.1. Test Limit ................................................................................................................ 18 7.2.2. Test Procedure used ............................................................................................... 18 7.2.3. Test Setting ............................................................................................................. 18 7.2.4. Test Setup ............................................................................................................... 18 7.2.5. Test Result .............................................................................................................. 19 7.3. Output Power Measurement ....................................................................................... 21 7.3.1. Test Limit ................................................................................................................ 21 7.3.2. Test Procedure Used .............................................................................................. 21 7.3.3. Test Setting ............................................................................................................. 21 7.3.4. Test Setup ............................................................................................................... 22 Report No.: 2006RSU069-U3 Page Number: 4 of 68 7.3.5. Test Result of Output Power ................................................................................... 23 7.4. Power Spectral Density Measurement ........................................................................ 24 7.4.1. Test Limit ................................................................................................................ 24 7.4.2. Test Proced…

Text truncated - open the document above for the full version.

MRT Technology (Suzhou) Co., Ltd Report No.: 2006RSU069-U6 Phone: +86-512-66308358 Report Version: V01 Web: www.mrt-cert.com Issue Date: 07-27-2020 Page Number: 1 of 68 FCC ID: HD5-CT40PL0N APPLICANT: Honeywell International Inc Honeywell Safety and Productivity Solutions Application Type: Certification Product: Mobile Computer Model No.: CT40P-L0N Brand Name: Honeywell FCC Classification: Digital Transmission System (DTS) FCC Rule Part(s): Part15 Subpart C (Section 15.247) Test Procedure(s): ANSI C63.10-2013 Test Date: July 07 ~ 27, 2020 MEASUREMENT REPORT FCC PART 15.247 / Bluetooth-LE Reviewed By: ( Jame Yuan ) Approved By: ( Robin Wu ) The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.10-2013. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. Report No.: 2006RSU069-U6 Page Number: 2 of 68 Revision History Report No. Version Description Issue Date Note 2006RSU069-U6 Rev. 01 Initial Report 07-27-2020 Valid Report No.: 2006RSU069-U6 Page Number: 3 of 68 CONTENTS Description Page 1. INTRODUCTION ..................................................................................................................... 6 1.1. Scope ........................................................................................................................... 6 1.2. MRT Test Location ....................................................................................................... 6 2. PRODUCT INFORMATION ..................................................................................................... 7 2.1. Feature of Equipment under Test ................................................................................. 7 2.2. Product Specification Subjective to this Report ............................................................. 7 2.3. Working Frequencies for this Report ............................................................................. 8 2.4. Test Mode .................................................................................................................... 8 2.5. Duty Cycle .................................................................................................................... 9 2.6. EMI Suppression Device(s)/Modifications ..................................................................... 9 2.7. Description of Test Software ......................................................................................... 9 2.8. Labeling Requirements ............................................................................................... 10 2.9. Test Environment Condition ........................................................................................ 10 3. DESCRIPTION OF TEST ....................................................................................................... 11 3.1. Evaluation Procedure .................................................................................................. 11 3.2. AC Line Conducted Emissions .................................................................................... 11 3.3. Radiated Emissions .................................................................................................... 12 4. ANTENNA REQUIREMENTS ................................................................................................ 13 5. TEST EQUIPMENT CALIBRATION DATE ............................................................................ 14 6. MEASUREMENT UNCERTAINTY ......................................................................................... 16 7. TEST RESULT ...................................................................................................................... 17 7.1. Summary .................................................................................................................... 17 7.2. 6dB Bandwidth Measurement ..................................................................................... 18 7.2.1. Test Limit ................................................................................................................ 18 7.2.2. Test Procedure used ............................................................................................... 18 7.2.3. Test Setting ............................................................................................................. 18 7.2.4. Test Setup ............................................................................................................... 18 7.2.5. Test Result .............................................................................................................. 19 7.…

Text truncated - open the document above for the full version.