HD5-CT70VDWLVehicle Dock

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com U.S. Agent Designation for Service of Process (Applicant is Both Grantee and U.S. Agent) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTENTION: FCC Certification – Section 2.911(d)(7) Information This letter is to confirm that the Applicant will also serve as the U.S. Agent for Service of Process as required by 47 CFR 2.911(d)(7). The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information changes. Applicant Company name: Honeywell International Inc FRN #: 0022970339 Grantee Code: HD5 FCC ID: HD5-CT70VDWL Contact Name: Cindy Jiang Street Address: 9680 Old Bailes Rd. Fort Mill, SC 29707, United State City/Province/Zip: Fort Mill/ SC/ 29707 Telephone No: +86(512)82258162 Email: [email protected] Applicant Signature: Date: 2025-11-24 Signed by (Printed Name/Title): Cindy Jiang/ Global Regulatory Compliance Manager

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Certification Application Attestation Statements Date: December 11, 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA FCC ID: HD5-CT70VDWL To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) _____Honeywell International Inc ______ certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Statement for 47 CFR section 2.911(d)(5)(ii) ______Honeywell International Inc ______ (“the applicant”) certifies that, as of the date of the filing of this application, the applicant ☐ - is / ☑ - is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates – see KDB 986446 Question 5) as an entity producing “covered” equipment. The applicant also certifies that the device does not have cybersecurity and/or anti-virus software produced by Kaspersky Lab, Inc or any of its successors and assignees identified on the covered list installed on the device, nor will it be installed by the applicant at any time after certification. Thank you, Cindy Jiang By: __________________________ ________________________ (Signature) (Print name) Title: Global Regulatory Compliance Manager Company: Honeywell International Inc Telephone: +86(512)82258162 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist .

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Declaration of Authorization We Name: Honeywell International Inc Address: 9680 Old Bailes Rd. Fort Mill, SC 29707 United States Declare that: Name Representative of agent: Marlin Chen Agent Company name: MRT Technology (Suzhou) Co., Ltd Address: D8 Building, Youxin Industrial Park, No.2 Tian'edang Rd., Wuzhong Economic Development Zone City: Suzhou Country: China is authorized to apply for Certification of the following product(s): Product: Vehicle Dock FCC ID: HD5-CT70VDWL Model No.: CT70-VD-WL Sincerely, ________________ Name: Cindy Jiang Title: Global Regulatory Compliance Manager Date: December 9, 2025

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Confidentiality Request Letter Federal Communications Commission Authorization and Evaluation Division FCC ID: HD5-CT70VDWL Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: 1. Block Diagram 2. Schematics 3. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, _________________ Name: Cindy Jiang Title: Global Regulatory Compliance Manager Date: December 9, 2025

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Short Term Confidentiality Request Letter Federal Communications Commission Authorization and Evaluation Division FCC ID: HD5-CT70VDWL Pursuant to sections 0.457 and 0.459 of CFR 47 Commission’s policy and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days: 1. External Photos 2. Internal Photos 3. Test Setup Photos 4. User Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, _________________ Name: Cindy Jiang Title: Global Regulatory Compliance Manager Date: December 9, 2025

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Cover Letter Federal Communications Commission Authorization and Evaluation Division FCC ID: HD5-CT70VDWL Please be notified that we, the undersigned, Honeywell International Inc declares that the product which bears the above FCC ID is also compliant with the FCC requirements for Supplier’s Declaration of Conformity(SDoC). And the SDoC procedure shall be carried out prior to marketing the device in the US. Sincerely, _________________ Name: Cindy Jiang Title: Global Regulatory Compliance Manager Date: December 9, 2025

3018-7512 3018-7512 A BillSep.15/25 POD LABEL,CT70 VD WL NOTES REQUIRED FOR LABEL MANUFACTURER: 1. ROHS COMPLIANT INKS. SEE ENVIRONMENTAL SPECIFICATION DOCUMENT #500007391 2. COLORS: BACKGROUND: HONEYWELL GRAY 8500 GRAPHICS: WHITE 3. REFERENCE BLANK LABEL DOCUMENT: 3014-2849-001 FOR DIE CUT AND MATERIAL SPECIFICATIONS. 4. LABEL TO MEET UL REQUIREMENTS FOR MARKING AND LABELING SYSTEMS, AND TO BE UL RECOGNIZED. PLACE UL RECOGNIZED LABEL INFORMATION ON EACH SMALLEST PACKAGING CONTAINER. THE PACKAGE LABELING TO INCLUDE: UL LOGO, SUPPLIER COMPANY TRADE MARK, SUPPLIER UL FILE NUMBER, SUPPLIER UL DESIGNATION, PER UL STANDARD REQUIREMENTS. 5. PRIOR TO MASS PRODUCTION, SAMPLE APPROVAL IS NEEDED ACCORDING TO HONEYWELL PPAP PROCESS. DETAIL DOCUMENT REQUIREMENTS ARE SPECIFIED ON HONEYWELL FORM L4-GLBL-LOG-1724, (LABELS APPLY TO LEVEL 2). FOR ASSISTANCE WITH THIS PROCEDURE, CONTACT THE HONEYWELL ISC GROUP FOR DOCUMENTATION AND FURTHER INSTRUCTIONS. SCALE 1:1 Material No.: 3018-7512-001 Speaker version A Release ECN-SZ000162 Sep.15/25 Brand owner:Honeywell International Inc automation.honeywell.com Patent: www.hsmpats.com Vehicle Dock/车载充电底座 Made In China/中国制造 Model/型号: CT70-VD-WL Input/输入: 12/24V DC FCC ID: HD5-CT70VDWL IC: 1693B-CT70VDWL PN: XXXXXXXXXX SN: XXXXXXXXXX PN SN 3018-7513 Sep.15/25Bill A SHIPPING LABEL,CT70 VD WL 3018-7513 Material No.: 3018-7513-001 WL Model/型号: CT70-VD-WL Honeywell International Inc. 9680 Old Bailes Road, Fort Mill, South Carolina 29707, USA Patents: www.hsmpats.com automation.honeywell.com MADE IN CHINA 中国制造 PN/部件号: XXXXXXXXXX SN/序列号: XXXXXXXXXX A Release ECN-SZ000162 Sep.15/25

MRT Technology (Suzhou) Co., Ltd. Report No.: R25S1024112-U402 Phone: +86-512-66308358 Report Version: V02 Web: www.mrt-cert.com Issue Date: 2025-12-17 Template Version: 2.1 1 of 10 RF Exposure Evaluation Declaration FCC ID: HD5-CT70VDWL Applicant: Honeywell International Inc Product: Vehicle Dock Model No.: CT70-VD-WL Brand Name: Honeywell FCC Rule Part(s): FCC Part 2.1091 Result: Complies Evaluation Date: 2025-12-05 Reviewed By: Denise Zhou Approved By: Robin Wu The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report. Testing was performed in accordance with the applicable measurement procedures. The test results reported herein apply only to the specific item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. Report No.: R25S1024112-U402 2 of 10 Revision History Report No. Version Description Issue Date Note R25S1024112-U402 V01 Initial Report 2025-12-09 Invalid R25S1024112-U402 V02 Correct WPT specification 2025-12-17 Valid Report No.: R25S1024112-U402 3 of 10 CONTENTS Description Page 1. General Information ............................................................................................................................... 4 1.1. Applicant ........................................................................................................................................4 1.2. Manufacturer .................................................................................................................................4 1.3. Testing Facility ...............................................................................................................................4 1.4. Product Information .......................................................................................................................5 1.5. Antenna Details .............................................................................................................................5 1.6. Device Classification .....................................................................................................................5 1.7. Applied Standards .........................................................................................................................5 2. RF Exposure Evaluation ........................................................................................................................ 6 2.1. Limits .............................................................................................................................................6 2.2. MPE Exemptions ...........................................................................................................................7 2.3. Calculated Result ....................................................................................................................... 10 Report No.: R25S1024112-U402 4 of 10 1. General Information 1.1. Applicant Honeywell International Inc 9680 Old Bailes Rd. Fort Mill, SC 29707 United States 1.2. Manufacturer Honeywell International Inc 9680 Old Bailes Rd. Fort Mill, SC 29707 United States 1.3. Testing Facility Test Site - MRT Suzhou Laboratory Laboratory Location (Suzhou - Wuzhong) D8 Building, No.2 Tian’edang Rd., Wuzhong Economic Development Zone, Suzhou, China Laboratory Location (Suzhou - SIP) 4b Building, Liando U Valley, No.200 Xingpu Rd., Shengpu Town, Suzhou Industrial Park, China Laboratory Location (Suzhou - Wujiang) Building 1, No.1 Xingdong Road, Wujiang, Suzhou, Jiangsu, People’s Republic of China Laboratory Accreditations A2LA: 3628.01 CNAS: L10551 FCC: CN1166 ISED: CN0001 Test Site - MRT Shenzhen Laboratory Laboratory Location (Shenzhen) 1G, Building A, Junxiangda Building, Zhongshanyuan Road West, Nanshan District, Shenzhen, China Laboratory Accreditations A2LA: 3628.02 CNAS: L10551 FCC: CN1284 ISED: CN0105 Test Site - MRT Taiwan Laboratory Laboratory Location (Taiwan) No. 38, Fuxing 2nd Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C.) Laboratory Accreditations TAF: 3261 FCC: 291082, TW3261 ISED: TW3261 Report No.: R25S1024112-U402 5 of 10 1.4. Product Information Product Name Vehicle Dock Model No. CT70-VD-WL Brand Name Honeywell Bluetooth Specification Dual mode, (BR/EDR& BLE 1M) WPT Specification 110.1 ~ 148 kHz Antenna Specification Refer to Section 1.5 Operating Temp. -20 ~ 50 °C Power Type Battery (12 VDC & 24 VDC) Note: The information of the EUT (Equipment Under Test) was provided by the manufacturer. The accuracy, completeness, and validity of the information are solely the responsibility of the manufacturer. 1.5. Antenna Details Technology Frequency Range (MHz) Antenna Type Max Peak Gain (dBi) Bluetooth 2400 ~ 2483.5 PCB Antenna -0.5 1.6. Device Classification According to the user manual, this device is classified as a Mobile Device. So, the RF exposure evaluation requirements of § 2.1091 for mobile device exposure conditions subject to MPE limits. 1.7. Applied Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards: ⚫ FCC Part 2.1091 ⚫ KDB 447498 D04 Interim General RF Exposure Guidance v01 Report No.: R25S1024112-U402 6 of 10 2. RF Exposure Evaluation 2.1. Limits According to FCC §1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in §1.1307(b) Limits For Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 0.3 ~ 3.0 614 1.63 *(100) ≤6 3.0 ~ 30 1842/f 4.89/f *(900/f 2 ) <6 30 ~ 300 61.4 0.163 1.0 <6 300 ~ 1500 -- -- f/300 <6 1500 ~ 100000 -- -- 5 <6 (B) Limits for General Population/ Uncontrolled …

Text truncated - open the document above for the full version.

Antenna dimension Antenna Specification Properties at 2.44 GHz Nano Antenna Appearance Part number Infineon Nano PCB Antenna Dimensions (mm) clearance area included 4.4*10 Frequency range 2400 MHz ~ 2500 MHz Max Peak Gain (dBi) -0.50 Manufacture Address Room101, 1F, No. 4, Lane 55, Chuanhe Road, Zhang Jiang Hi- Tech Park, Pudong, 201210 Shanghai, China Radiated Pattern

MRT Technology (Suzhou) Co., Ltd. Report No.: R25S1024112-U201 Phone: +86-512-66308358 Report Version: V02 Web: www.mrt-cert.com Issue Date: 2025-12-17 Template Version: 2.1 1 of 88 RF MEASUREMENT REPORT FCC ID: HD5-CT70VDWL Applicant: Honeywell International Inc Product: Vehicle Dock Model No.: CT70-VD-WL Brand Name: Honeywell FCC Classification: FCC Part 15 Spread Spectrum Transmitter (DSS) FCC Rule Part(s): Part15 Subpart C (Section 15.247) Result: Complies Received Date: 2025-11-26 Test Date: 2025-11-27 ~ 2025-12-05 Reviewed By: Denise Zhou Approved By: Robin Wu The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report. Testing was performed in accordance with the applicable measurement procedures. The test results reported herein apply only to the specific item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. Report No.: R25S1024112-U201 2 of 88 Revision History Report No. Version Description Issue Date Note R25S1024112-U201 V01 Initial Report 2025-12-09 Invalid R25S1024112-U201 V02 Correct WPT specification 2025-12-17 Valid Report No.: R25S1024112-U201 3 of 88 CONTENTS Description Page 1. General Information ................................................................................................................................ 6 1.1. Applicant ...................................................................................................................................... 6 1.2. Manufacturer ................................................................................................................................ 6 1.3. Testing Facility ............................................................................................................................. 6 1.4. Product Information ...................................................................................................................... 7 1.5. Radio Specification under Test .................................................................................................... 7 1.6. Working Frequencies ................................................................................................................... 8 1.7. Pseudorandom Frequency Hopping Sequence ........................................................................... 9 2. Test Configuration ................................................................................................................................. 10 2.1. Test Mode .................................................................................................................................. 10 2.2. Test System Connection Diagram ............................................................................................. 10 2.3. Test Software ............................................................................................................................. 10 2.4. Applied Standards ....................................................................................................................... 11 2.5. Test Environment Condition ........................................................................................................ 11 3. Antenna Requirement ........................................................................................................................... 12 4. Measuring Instrument ........................................................................................................................... 13 5. Decision Rules and Measurement Uncertainty .................................................................................. 14 5.1. Decision Rules ........................................................................................................................... 14 5.2. Measurement Uncertainty .......................................................................................................... 14 6. Test Result .............................................................................................................................................. 15 6.1. Summary .................................................................................................................................... 15 6.2. 20 dB Bandwidth Measurement ................................................................................................. 16 6.2.1. Test Limit .................................................................................................................................... 16 6.2.2. Test Procedure ........................................................................................................................... 16 6.2.3. Test Setting ................................................................................................................................ 16 6.2.4. Test Setup .................................................................................................................................. 16 6.2.5. Test Result ................................................................................................................................. 16 6.3. Output Power Measurement ...................................................................................................... 17 6.3.1. Test Limit .................................................................................................................................... 17 6.3.2. Test Procedure ........................................................................................................................... 17 6.3.3. Test Setting ................................................................................................................................ 17 6.3.4. Test Setup .......................................................................................................................…

Text truncated - open the document above for the full version.

Report No.: R25S1024112-U201 60 of 88 Test Site SIP-AC3 Test Engineer Yuuki Qiu Test Date 2025-12-02 ~ 2025-12-05 Test Mode 3DH5 Remark: 1. Average measurement was not performed if peak level lower than average limit. 2. Other frequency was 20 dB below limit line within 1-18 GHz, there is not show in the report. Test Channel Frequency (MHz) Reading Level (dBμV) Factor (dB/m) Measure Level (dBμV/m) Limit (dBμV/m) Margin (dB) Detector Polarization 00 11932.70 47.89 0.40 48.29 74.00 -25.71 Peak Horizontal 15965.10 45.05 7.41 52.46 74.00 -21.54 Peak Horizontal 17960.90 31.63 11.59 43.22 54.00 -10.78 Average Horizontal 17960.90 43.43 11.59 55.02 74.00 -18.98 Peak Horizontal 12112.90 47.81 0.51 48.32 74.00 -25.68 Peak Vertical 15936.20 44.77 7.83 52.60 74.00 -21.40 Peak Vertical 17799.40 32.19 11.17 43.36 54.00 -10.64 Average Vertical 17799.40 44.74 11.17 55.90 74.00 -18.10 Peak Vertical 39 12014.30 48.31 0.41 48.72 74.00 -25.28 Peak Horizontal 15951.50 45.00 7.61 52.61 74.00 -21.39 Peak Horizontal 17792.60 31.68 11.07 42.75 54.00 -11.25 Average Horizontal 17792.60 43.83 11.07 54.90 74.00 -19.10 Peak Horizontal 12240.400 47.33 1.05 48.38 74.00 -25.62 Peak Vertical 16152.100 45.18 7.86 53.04 74.00 -20.96 Peak Vertical 17998.300 31.57 11.74 43.31 54.00 -10.69 Average Vertical 17998.300 43.77 11.74 55.51 74.00 -18.49 Peak Vertical 78 12434.20 47.42 1.42 48.84 74.00 -25.16 Peak Horizontal 15937.90 44.43 7.79 52.22 74.00 -21.78 Peak Horizontal 17789.20 31.89 10.87 42.76 54.00 -11.24 Average Horizontal 17789.20 43.88 10.87 54.75 74.00 -19.25 Peak Horizontal 12055.10 48.16 0.52 48.68 74.00 -25.32 Peak Vertical 15926.00 44.41 8.08 52.50 74.00 -21.50 Peak Vertical 17976.20 32.50 11.50 44.00 54.00 -10.00 Average Vertical 17976.20 44.28 11.50 55.78 74.00 -18.22 Peak Vertical Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB/m) Factor (dB/m) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB) Report No.: R25S1024112-U201 61 of 88 The Result of Radiated Emission below 1 GHz: Site SIP-AC3 Test Date 2025-12-02 Temperature 19.8 °C Humidity 49.7% Limit FCC_Part 15.209_RSE(3 m) Test Engineer Yuuki Qiu Test Voltage DC 12 V Polarity Horizontal Test Mode Transmit by DH5 at 2441 MHz No Mark Frequency (MHz) Reading (dBμV) C.F (dB/m) Measurement (dBμV/m) Margin (dB) Limit (dBμV/m) Detector 1 62.409 -4.60 17.30 12.70 -27.30 40.00 QP 2 111.074 -0.10 15.31 15.21 -28.29 43.50 QP 3 144.031 0.00 17.93 17.93 -25.57 43.50 QP 4 180.017 2.90 16.80 19.70 -23.80 43.50 QP 5 * 241.676 9.00 16.55 25.55 -20.45 46.00 QP 6 932.599 -8.70 30.63 21.93 -24.07 46.00 QP Notes: 1. " *" indicates the worst-case emission level observed during the measurement. 2. C.F (dB/m) = Antenna Factor (dB/m) + Cable Loss (dB). 3. Measurement (dBμV/m) = Reading (dBμV) + C.F (dB/m). 4. The amplitude of the radiated emissions in the frequency range from 9 kHz to 30 MHz and 18 GHz to 25 GHz is close to the ambient noise level, and all emissions are at least 20 dB below the applicable limit. Therefore, the data is not presented in this report. Report No.: R25S1024112-U201 62 of 88 Site SIP-AC3 Test Date 2025-12-02 Temperature 19.8 °C Humidity 49.7% Limit FCC_Part 15.209_RSE(3 m) Test Engineer Yuuki Qiu Test Voltage DC 12 V Polarity Vertical Test Mode Transmit by DH5 at 2441 MHz No Mark Frequency (MHz) Reading (dBμV) C.F (dB/m) Measurement (dBμV/m) Margin (dB) Limit (dBμV/m) Detector 1 52.890 12.70 18.25 30.95 -9.05 40.00 QP 2 57.574 12.70 17.87 30.57 -9.43 40.00 QP 3 * 63.313 16.00 17.17 33.17 -6.83 40.00 QP 4 95.998 16.20 12.74 28.94 -14.56 43.50 QP 5 118.352 8.90 16.08 24.98 -18.52 43.50 QP 6 825.754 1.70 29.00 30.70 -15.30 46.00 QP Notes: 1. " *" indicates the worst-case emission level observed during the measurement. 2. C.F (dB/m) = Antenna Factor (dB/m) + Cable Loss (dB). 3. Measurement (dBμV/m) = Reading (dBμV) + C.F (dB/m). 4. The amplitude of the radiated emissions in the frequency range from 9 kHz to 30 MHz and 18 GHz to 25 GHz is close to the ambient noise level, and all emissions are at least 20 dB below the applicable limit. Therefore, the data is not presented in this report. Report No.: R25S1024112-U201 63 of 88 A.10 Radiated Restricted Band Edge Test Result Site SIP-AC3 Test Date 2025-12-01 Temperature 18.1 °C Humidity 53.8% Limit FCC_Part15_Band Edge(3 m) Test Engineer Yuuki Qiu Test Voltage DC 12 V Polarity Horizontal Test Mode Transmit by DH5 at 2402 MHz No Mark Frequency (MHz) Reading (dBμV) C.F (dB/m) Measurement (dBμV/m) Margin (dB) Limit (dBμV/m) Detector 1 * 2387.881 24.81 32.84 57.65 -16.35 74.00 Peak 2 2390.000 21.85 32.85 54.70 -19.30 74.00 Peak 3 2402.159 59.32 32.92 92.25 N/A N/A Peak Notes: 1. " *" indicates the worst-case emission level observed during the measurement. 2. C.F (dB/m) = Antenna Factor (dB/m) + Cable Loss (dB). 3. Measurement (dBμV/m) = Reading (dBμV) + C.F (dB/m). Report No.: R25S1024112-U201 64 of 88 Site SIP-AC3 Test Date 2025-12-01 Temperature 18.1 °C Humidity 53.8% Limit FCC_Part15_Band Edge(3 m) Test Engineer Yuuki Qiu Test Voltage DC 12 V Polarity Horizontal Test Mode Transmit by DH5 at 2402 MHz No Mark Frequency (MHz) Reading (dBμV) C.F (dB/m) Measurement (dBμV/m) Margin (dB) Limit (dBμV/m) Detector 1 * 2372.481 11.30 32.78 44.08 -9.92 54.00 Average 2 2390.000 8.75 32.85 41.60 -12.40 54.00 Average 3 2402.074 59.24 32.92 92.16 N/A N/A Average Notes: 1. " *" indicates the worst-case emission level observed during the measurement. 2. C.F (dB/m) = Antenna Factor (dB/m) + Cable Loss (dB). 3. Measurement (dBμV/m) = Reading (dBμV) + C.F (dB/m). Report No.: R25S1024112-U201 65 of 88 Site SIP-AC3 Test Date 2025-12-01 Temperature 18.1 °C Humidity 53.8% Limit FCC_Part15_Band Edge(3 m) Test Engineer Yuuki Qiu Test Voltage DC 12 V Polarity Vertical Test Mode Transmit by DH5 at 2402 MHz No Mark Frequency (MHz) Reading (dBμV) C.F (dB/m) Measurement (dBμV/m) Margin (dB) Limit (dBμV/m) Detector 1 * 2332.534 24.88 32.73 57.61 -16.39 74.00 Peak 2 2390.000 20.59 32.85 53.44 -20.56 74.00 Peak 3 2402…

Text truncated - open the document above for the full version.