HD5-VM3WLANAVehicle Mount Computer

BT111: Bluetooth ® Smart Ready HCI Module DATA SHEET Monday, 05 August 2013 Version 1.25 Bluegiga Technologies Oy Copyright © 2000-2013 Bluegiga Technologies All rights reserved. Bluegiga Technologies assumes no responsibility for any errors which may appear in this manual. Furthermore, Bluegiga Technologies reserves the right to alter the hardware, software, and/or specifications detailed here at any time without notice and does not make any commitment to update the information contained here. Bluegiga’s products are not authorized for use as critical components in life support devices or systems. The WRAP is a registered trademark of Bluegiga Technologies The Bluetooth trademark is owned by the Bluetooth SIG Inc., USA and is licensed to Bluegiga Technologies. All other trademarks listed herein are owned by their respective owners. Bluegiga Technologies Oy VERSION HISTORY Version Comment 1.0 First public release 1.1 Minor changes 1.2 FCC and CE update 1.21 Low energy master and slave mode supported 1.22 IC statement modified 1.23 Contact details updated 1.24 Formatting, reel dimensions 1.25 Recommended PCB land pattern added Bluegiga Technologies Oy TABLE OF CONTENTS 1 BT111 Product numbering ............................................................................................................................7 2 Block Diagram ...............................................................................................................................................8 3 Pinout and Terminal Descriptions .................................................................................................................9 4 External Dimensions and Land Pattern ...................................................................................................... 11 5 Layout Guidelines ....................................................................................................................................... 13 5.1 BT111-A Layout Guide ....................................................................................................................... 13 6 Electrical Characteristics ............................................................................................................................ 15 6.1 Absolute Maximum Ratings ............................................................................................................... 15 6.2 Input/Output Terminal Characteristics ................................................................................................ 15 6.2.1 USB Linear Regulator ................................................................................................................... 15 6.2.2 High-voltage Linear Regulator ...................................................................................................... 16 6.2.3 Digital ............................................................................................................................................ 16 6.3 Current Consumption ......................................................................................................................... 17 7 RF Characteristics ...................................................................................................................................... 20 7.1 Transmitter Characteristics ................................................................................................................ 20 7.2 Receiver Characteristics .................................................................................................................... 21 7.3 Radiated Spurious Emissions ............................................................................................................ 22 7.4 Antenna Characteristics ..................................................................................................................... 22 8 Clock Generation ........................................................................................................................................ 23 9 Bluetooth Stack Microcontroller .................................................................................................................. 24 10 Programmable I/O Ports ......................................................................................................................... 24 11 Wi-Fi Coexistence Interface .................................................................................................................... 24 12 Memory Management ............................................................................................................................. 25 12.1 Memory Management Unit ................................................................................................................. 25 12.2 System RAM ...................................................................................................................................... 25 12.3 Internal ROM Memory (5Mb) ............................................................................................................. 25 12.4 Internal EEPROM ............................................................................................................................... 25 13 Serial Interfaces ...................................................................................................................................... 26 13.1 USB Interface ..................................................................................................................................... 26 13.2 Programming and Debug Interface .................................................................................................... 26 14 Audio Interfaces ...................................................................................................................................... 27 14.1 PCM Interface ........................................................................................................................…

Text truncated - open the document above for the full version.

RegSht-VM3 Rev (b) FCC Part 15 Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet helpful: “Something About Interference.” This is available at FCC local regional offices. Honeywell is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Honeywell. The correction is the responsibility of the user. Caution: Any changes or modifications made to this equipment not expressly approved by Honeywell may void the FCC authorization to operate this equipment. FCC 5GHz Statement For the band 5600-5650 MHz, no operation is permitted. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. Canada, Industry Canada (IC) Notices This Class A digital apparatus complies with Canadian RSS-GEN issue 3:2010 and RSS-210 issue 8:2010. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Exposure of humans to RF fields (RSS-102) The computers employ low gain integral antennas that do not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site at http://www.hc-sc.gc.ca. The radiated energy from the antennas connected to the wireless adapters conforms to the IC limit of the RF exposure requirement regarding IC RSS-102, Issue 4 clause 4.1. Canada, avis d'Industry Canada (IC) Cet appareil numérique de classe A est conforme aux normes canadiennes RSS-GEN numéro 3:2010 et RSS-210 numéro 8:2010. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter son fonctionnement. Conformité des appareils de radiocommunication aux limites d'exposition humaine aux radiofréquences (CNR-102) L'ordinateur utilise des antennes intégrales à faible gain qui n'émettent pas un champ électromagnétique supérieur aux normes imposées par Santé Canada pour la population. Consultez le Code de sécurité 6 sur le site Internet de Santé Canada à l'adresse suivante : http://www.hc- sc.gc.ca/ L'énergie émise par les antennes reliées aux cartes sans fil respecte la limite d'exposition aux radiofréquences telle que définie par Industrie Canada dans la clause 4.1 du document CNR-102, version 4. h RF Safety Notice This device is intended to transmit RF energy. For protection against RF exposure to humans and in accordance with FCC rules and Industry Canada rules, this transmitter should be installed such that a minimum separation distance of at least 20 cm (7.8 in.) is maintained between the antenna and the general population. Hinweis zur HF-Sicherheit Dieses Gerät strahlt HF-Energie ab. Um Personen Schutz vor Hochfrequenzstrahlung zu gewähren und den FCCVorschriften bzw. den diesbezüglichen kanadischen Bestimmungen zu entsprechen, sollte dieses Sendegerät so installiert werden, dass zur Antenne ein Mindestabstand von 20 cm eingehalten wird. Aviso sobre seguridad de RF Este dispositivo transmite energía RF. Para protección contra la exposición a RF en humanos y de conformidad con las normas de la FCC e industriales de Canadá, este transmisor debe instalarse de forma que haya una distancia de separación mínima de 20 cm (7,8 pulgadas) entre la antena y la población general. Aviso de segurança de RF Este dispositivo se destina a transmitir energia de RF. Para proteção contra exposição de seres humanos à RF e em conformidade com as normas da FCC e da Industry Canada, este transmissor deve ser instalado de forma que seja mantida uma distância mínima de 20 cm (7,8 polegadas) entre a antena e a população em geral. 射频安全通知 本设备用于传输射频能量。 为了防止射频暴露于人类以 及符合FCC 法规及加拿大 行业法规，安装本发 射器时，务必在天线和人群之间保持 至少20 厘米( 7.8 cm) 的间隔距离。 The CE marking indicates compliance with the following directives: • 1995/5/EC R&TTE • 2011/65/EU RoHS (Recast) In addition, complies to 2006/95/EC Low Voltage Directive, when shipped with recommended power supply. European contact: Hand Held Products Europe B.V. Nijverheidsweg 9-13 5627 BT Eindhoven The Netherlands Honeywell shall not be liable for use of our product with equipment (i.e., power supplies, personal computers, etc.) that is not CE marked and does not comply with the Low Voltage Directive. Le marquage CE indique la conformité avec les directives suivantes : • 1995/5/CE R & TTE • 2011/65/UE – RoHS (Refonte) De plus, ce produit est conforme à la Directive européenne 2006/95/CE relative aux basses tensions lorsqu’il est expédié avec le bloc d’alimentation recommandé. Personne-ressource en Europe : Hand Held Products Europe B.V…

Text truncated - open the document above for the full version.

Thor™ VM3 Vehicle-Mount Computer with Microsoft ® Windows ® Embedded Standard 7 with Microsoft ® Windows ® 7 Professional User’s Guide Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII. HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII. © 2014-2015 Honeywell International Inc. All rights reserved. Web Address: www.honeywellaidc.com Trademarks RFTerm is a trademark or registered trademark of EMS Technologies, Inc. in the United States and/or other countries.Micro- soft ® Windows, ActiveSync ® , MSN, Outlook ® , Windows Mobile ® , the Windows logo, and Windows Media are registered trade- marks or trademarks of Microsoft Corporation. Intel ® and Atom™ are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Summit Data Communications, the Laird Technologies Logo, the Summit logo, and “Connected. No Matter What” are trade- marks of Laird Technologies, Inc. Wi-Fi ® , WMM ® , Wi-Fi Mutlimedia™, Wi-Fi Protected Access ® , WPA™, WPA2™ and the Wi-Fi CERTIFIED™ logo are trade- marks or registered trademarks of Wi-Fi Alliance. The Bluetooth ® word mark and logos are owned by the Bluetooth SIG, Inc. Symbol ® is a registered trademark of Symbol Technologies. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. Freefloat, Link*One, Key*One and Access*One are trademarks of Freefloat, Mölndalsvägen 30B, SE-412 63Gothenburg, Swe- den. RAM ® and RAM Mount™ are both trademarks of National Products Inc., 1205 S. Orr Street, Seattle, WA 98108. Qualcomm ® is a registered trademark of Qualcomm Incorporated. Gobi is a trademark of Qualcomm Incorporated. Ver izon ® is a registered trademark of Verizon Trademark Services LLC. T-MOBILE ® is a registered trademark of Deutsche Telekom AG. AT & T ® is a registered trademark of AT&T Intellectual Property. SD and SDHC are trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both. SanDisk ® and CompactFlash ® are trademarks of SanDisk Corporation, registered in the United States and other countries. Transcend ® is a registered trademark of Transcend Information, Inc. ATP is a trademark of ATP Electronics, Inc. Acrobat ® Reader © 2015 with express permission from Adobe Systems Incorporated. Other product names or marks mentioned in this document may be trademarks or registered trademarks of other companies and are the property of their respective owners. Patents For patent information, please refer to www.honeywellaidc.com/patents. 1 Chapter 1 - Thor VM3 Agency Information FCC Part 15 Statement........................................................................................................1-1 FCC 5GHz Statement ..........................................................................................................1-1 EMC Directive Requirements...............................................................................................1-1 Canada, Industry Canada (IC) Notices ................................................................................1-1 ANATEL (Brazil)...................................................................................................................1-2 Vehicle Power Supply Connection Safety Statement ..........................................................1-2 Li-Ion Battery........................................................................................................................1-2 RF Safety Notice ..................................................................................................................1-2 Bluetooth ..............................................................................................................................1-2 Honeywell Scanning & Mobility Product Environmental Information....................................1-2 CE Mark ...............................................................................................................................1-2 Chapter 2 - Getting Started Overview ..............................................................................................................................2-1 About this Guide ..................................................................................................................2-1 Out of the Box ......................................................................................................................2-2 Initial Setup for Thor VM3 ....................................................................................................2-2 Hardware Setup .............................................................................................................2-2 Software .........................................................................................................................2-2 Languages ...............................................................................................................2-2 First Boot ..................................................................................................................2-2 Software Setup.........................................................................................................2-2 Quick Mount Smart Dock .................…

Text truncated - open the document above for the full version.

3 - 3 Main Start > All Programs > Summit > Summit Client Utility > Main tab Factory Default Settings The Main tab displays information about the wireless client device including: • SCU (Summit Client Utility) version • Driver version • Radio Type (ABGN is an 802.11 a/b/g/n radio). • Regulatory Domain • Copyright Information can be accessed by tapping the About SCU button • Active Config profile / Active Profile name • Status of the client (Down, Associated, Authenticated, etc.). The Active Profile can be switched without logging in to Admin mode. Selecting a different profile from the drop down list does not require logging in to Administrator mode. The profile must already exist. Profiles can be created or edited after the Admin login password has been entered and accepted. When the profile named “ThirdPartyConfig” is chosen as the active profile, the Summit Client Utility passes control to Wire- less Manager for configuration of all client and security settings for the network module. The Disable Radio button can be used to disable the network card. Once disabled, the button label changes to Enable Radio. By default the radio is enabled. The Admin Login button provides access to editing wireless parameters. Profile and Global may only be edited after enter- ing the Admin Login password. The password is case-sensitive. Once logged in, the button label changes to Admin Logout. To logout, either tap the Admin Logout button or exit the SCU without tapping the Admin Logout button. Admin Login To login to Administrator mode, tap the Admin Login button. Once logged in, the button label changes to Admin Logout. The admin is automatically logged out when the SCU is exited. The Admin can either tap the Admin Logout button, or the OK button to logout. Admin LoginSUMMIT RadioEnabled Active Config/ProfileDefault Regulatory DomainFCC, ETSI or Worldwide 3 - 4 Enter the Admin password (the default password is SUMMIT and is case sensitive) and tap OK. If the password is incorrect, an error message is displayed. The Administrator default password can be changed on the tab. The end-user can: • Turn the radio on or off on the Main tab. • Select an active Profile on the Main tab. • View the current parameter settings for the profiles on the Profile tab. • View the global parameter settings on the Global tab. • View the current connection details on the Status tab. • View radio status, software versions and regulatory domain on the Main tab. • Access additional troubleshooting features on the Diags tab. After Admin Login, the end-user can also: • Create, edit, rename and delete profiles on the Profile tab. • Edit global parameters on the Global tab. • Enable/disable the Summit tray icon in the taskbar. 3 - 5 Profile Start > All Programs > Summit > Summit Client Utility > Profile tab Note: Tap the Commit button to save changes before leaving this panel or the SCU. If the panel is exited before tapping the Commit button, changes are not saved! Factory Default Settings When logged in as an Admin use the Profile tab to manage profiles. When not logged in as an Admin, the parameters can be viewed, and cannot be changed. The buttons on this tab are dimmed if the user is not logged in as Admin. The Profile tab was previously labeled Config. Buttons ProfileDefault SSIDBlank Client NameBlank Power SaveCAM Tx PowerMaximum Bit RateAuto Radio ModeBGA rates full Auth TypeOpen EAP TypeNone EncryptionNone ButtonFunction CommitSaves the profile settings made on this screen. Settings are saved in the profile. CredentialsAllows entry of a username and password, certificate names, and other information required to authen- ticate with the access point. The information required depends on the EAP type. DeleteDeletes the profile. The current active profile cannot be deleted and an error message is displayed if a delete is attempted. NewCreates a new profile with the default settings (see Profile Parameters) and prompts for a unique name. If the name is not unique, an error message is displayed and the new profile is not created. RenameAssigns a new, unique name. If the new name is not unique, an error message is displayed and the profile is not renamed. 3 - 6 Note: Unsaved Changes – The SCU will display a reminder if the Commit button is not clicked before an attempt is made to close or browse away from this tab. Important – The settings for Auth Type, EAP Type and Encryption depend on the security type chosen. Profile Parameters ScanOpens a window that lists access points that are broadcasting their SSIDs. Tap the Refresh button to view an updated list of APs. Each AP’s SSID, its received signal strength indication (RSSI) and whether or not data encryption is in use (true or false). Sort the list by tapping on the column headers. If the scan finds more than one AP with the same SSID, the list displays the AP with the strongest RSSI and the least security. If you are logged in as an Admin, tap an SSID in the list and tap the Configure button, you return to the Profile window to recreate a profile for that SSID, with the profile name being the same as the SSID (or the SSID with a suffix such as “_1” if a profile with the SSID as its name exists already). WEP Keys / PSK Keys Allows entry of WEP keys or pass phrase as required by the type of encryption. ParameterDefaultExplanation Edit ProfileDefaultA string of 1 to 32 alphanumeric characters, establishes the name of the Profile. Options are Default or ThirdPartyConfig. SSIDBlankA string of up to 32 alphanumeric characters. Establishes the Service Set Iden- tifier (SSID) of the WLAN to which the client connects. Client NameBlankA string of up to 16 characters. The client name is assigned to the network card and the device using the network card. The client name may be passed to net- working wireless devices, e.g. Access Points. Power SaveCAMPower save mode. Options are: Constantly Awake Mode (CAM) power save off, Maximum (power saving mode) and Fast (power saving mode). When using …

Text truncated - open the document above for the full version.

ACX Advanced Ceramic X AT3216 Series Multilayer Chip Antenna Features ™ Monolithic SMD with small, low-profile and light-weight type. ™ Wide bandwidth Applications ™Bluetooth/Wireless LAN/Home RF ™ISM band 2.4GHz applications Specifications Part Number Frequency Range (MHz) Peak Gain （XZ-V） Average Gain （XZ-V） VSWR Impedance AT3216 -B2R7HAA_ 2400 ~ 2500 0.5 dBi typ. -0.5 dBi typ.2 max. 50 Ω Q’ty/Reel (pcs) : 3,000pcs Operating Temperature Range : -40 ~ +85 o C Storage Temperature Range : -40 ~ +85 o C Power Capacity : 3W max. Part Number AT 3216 - B 2R7 HAA ‡ ‡ i ghfe dc c Type AT : Antenna d Dimensions ( L × W ) 3.2× 1.6 mm e Material Code B f Frequency Range 2R7=2700MHz g Specification Code HAA h Packaging T: Tape & Reel B: Bulk i Soldering =lead-containing /LF=lead-free Terminal Configuration No. Terminal Name No. Terminal Name c Feeding Point d NC d c ACX Advanced Ceramic X Dimensions and Recommended PC Board Pattern Unit : mm a W T L Mark L W T a Dimensions 3.2±0.2 1.6±0.2 1.3+ 0.1/-0.2 0.5±0.3 (a) Without Matching Circuits (b) With Matching Circuits 1.2pF 3.3nH 2.6 4.2 1.6 1.9 2.7nH 0.4 * *Line width should be designed to match 50Ω characteristic impedance, depending on PCB material and thickness. ACX Advanced Ceramic X Typical Electrical Characteristics (T=25 o C) ™Test Board Ground 13.5mm 6.5mm 39.5mm 4mm No Ground Matching Circuit 50Ω Feed Line 19mm Antenna 6.5mm ™Return Loss (a) Without Matching Circuits (b) With Matching Circuits ACX Advanced Ceramic X Radiation Patterns .... XZ cut @2.45GHz Vertical Horizontal YZ cut @2.45GHz Vertical Horizontal XZ-V/XZ-H YZ-V/YZ-H XY cut @2.45GHz Vertical Horizontal Z 270 o 0 o X Y XY-cut scanning direction Y 270 o 0 o X Z XZ-cut scanning direction Z X 0 o 270 Y YZ-cut scanning direction 180 180 180 o XY-V/XY-H 90 o 90 o 90 o Advanced Ceramic X Corp. 16 Tzu Chiang Road, Hsinchu Industrial District Hsinchu Hsien 303, Taiwan TEL:886-3-5987008 FAX:886-3-5987001 E-mail: [email protected] http://www.acxc.com.tw

Venture GES Singapore Pte. Ltd LXE VM3 EVT2 WIFI Internal Antenna Test Report COMPANY CONFIDENTIAL Page 1/30 LXE VM3 System VM3 WIFI INTERNAL Antenna Measurement Report (EVT2) ANTENNA P/N: FIT-VM3-ANT-21Y and FIT- VM3-ANT-028 Revision 01 Date: 28 Aug 2014 Last updated: NA CONFIDENTIAL INFORMATION!! The electronic version of this document is the revision-controlled copy. All printed copies are considered uncontrolled copies Venture GES Singapore Pte. Ltd LXE VM3 EVT2 WIFI Internal Antenna Test Report COMPANY CONFIDENTIAL Page 2/30 Signature Sheet Prepared by: Name Title Date Signature Tan Huang Fong RF Consultant 28 Aug, 2014 Reviewed by: Name Title Date Signature Approved by (Venture GES Singapore Pte Ltd): Name Title Date Signature Review and Approved by (Customer): Name Title Date Signature Venture GES Singapore Pte. Ltd LXE VM3 EVT2 WIFI Internal Antenna Test Report COMPANY CONFIDENTIAL Page 3/30 Revision History Item Description Changes Latest update date Prepared By 1 Ver01, First Draft Version 28 Aug 2014 Tan Huan Fong Venture GES Singapore Pte. Ltd LXE VM3 EVT2 WIFI Internal Antenna Test Report COMPANY CONFIDENTIAL Page 4/30 Table of Content 1. INTRODUCTION ............................................................................................................................................................. 5 2. WIFI INTERNAL DUAL BAND ANTENNA ................................................................................................................. 5 3. 2.4GHZ WIFI ANTENNA RADIATION PLOTS ........................................................................................................ 13 4. 5GHZ WIFI ANTENNA RADIATION PLOTS ........................................................................................................... 22 5. CONCLUSION ................................................................................................................................................................ 30 Venture GES Singapore Pte. Ltd LXE VM3 EVT2 WIFI Internal Antenna Test Report COMPANY CONFIDENTIAL Page 5/30 1. INTRODUCTION The following report describes the results of the Internal Dual Band WIFI Antenna for the VM3 EVT2 Terminal. The test is based on the Section 1 of the RF Hardware Validation Test Plan Version 1.0. The Antenna 2D Radiation Plots measurement is being performed in the Full Anechoic Chamber. 2. WIFI INTERNAL DUAL BAND ANTENNA Figure 1 shows the WIFI Internal Dual Band Antenna designed for VM3 Terminal. Figure 2 describes the location of Top Antenna and Side Antenna. Figure 3 describes the test setup for the Antenna Return Loss measurement. Figure 4 to 7 shows the Return Loss of both Antenna in the 2.4GHz band and 5GHz band. The Part Number of the antenna is FIT-VM3-ANT-21Y and FIT-VM3-ANT-028 Figure 1 WIFI Internal Dual Band Antenna Figure 2 Antenna Definition Top Antenna Side Antenna Venture GES Singapore Pte. Ltd LXE VM3 EVT2 WIFI Internal Antenna Test Report COMPANY CONFIDENTIAL Page 6/30 Figure 3 Return Loss Test Setup Figure 4 Top Antenna 2.4GHz Return Loss Agilent E5071C Test Fixture Test Antenna Venture GES Singapore Pte. Ltd LXE VM3 EVT2 WIFI Internal Antenna Test Report COMPANY CONFIDENTIAL Page 7/30 Figure 5 Side Antenna 2.4GHz Return Loss Figure 6 Top Antenna 5GHz Return Loss Venture GES Singapore Pte. Ltd LXE VM3 EVT2 WIFI Internal Antenna Test Report COMPANY CONFIDENTIAL Page 8/30 Figure 7 Side Antenna 5GHz Return Loss Venture GES Singapore Pte. Ltd LXE VM3 EVT2 WIFI Internal Antenna Test Report COMPANY CONFIDENTIAL Page 9/30 Figure 8 to 10 describes the definition of the various plane cut for the Antenna measurement. Figure 8 Definition of H- Plane Cut 90 degree -90 degree Venture GES Singapore Pte. Ltd LXE VM3 EVT2 WIFI Internal Antenna Test Report COMPANY CONFIDENTIAL Page 10/30 Figure 9 Definition of E1 Plane Cut -90 degree 90 degree Venture GES Singapore Pte. Ltd LXE VM3 EVT2 WIFI Internal Antenna Test Report COMPANY CONFIDENTIAL Page 11/30 Figure 10 Definition of E2 Plane Cut …

Text truncated - open the document above for the full version.