HD585606065802.11b Transmitter

User’s Guide- Preliminary CP4 Draft Image Kiosk 8560 with Microsoft® Windows® CE Disclaimer Hand Held Products, Inc. (“Hand Held Products”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult Hand Held Products to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of Hand Held Products. Hand Held Products shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of Hand Held Products. © 2006 Hand Held Products, Inc. All rights reserved. Web Address: www.handheld.com Trademarks Microsoft, Windows, Windows CE, Windows NT, Windows 2000, Windows ME, Windows XP, ActiveSync, Outlook, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation. Intel is a registered trademark of Intel Corporation. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are the property of their respective owners. Image Kiosk 8560 User’s Guide- Pre- liminary CP4 Draft Rev (a) 6/27/06 iii Chapter 1 - Agency Information Required Safety Labels ....................................................................................................................... 1-1 Safety Label, non-RF.................................................................................................................... 1-1 Safety Label, 802.11b Radio ........................................................................................................ 1-1 Regulatory and Safety Approvals for all IK8560 Devices .................................................................1-2 FCC Compliance ................................................................................................................................. 1-2 Chapter 2 - Getting Started IK8560 Features .................................................................................................................................. 2-1 Connect the Power and Communication Cables ................................................................................. 2-1 Boot the IK8560 .................................................................................................................................. 2-1 Start Screen ......................................................................................................................................... 2-1 Task Tray ...................................................................................................................................... 2-2 Setting the Time and Date................................................................................................................... 2-2 Using the Soft Input Panel (SIP) ......................................................................................................... 2-3 Adjusting the Backlight....................................................................................................................... 2-3 Adjusting the Contrast .................................................................................................................. 2-4 Using Windows Explorer .................................................................................................................... 2-4 Selecting Text...................................................................................................................................... 2-4 Selecting Programs.............................................................................................................................. 2-4 Chapter 3 - Hardware Overview Front Panel .......................................................................................................................................... 3-1 Back Panel........................................................................................................................................... 3-2 Connectors .................................................................................................................................... 3-3 Connecting the Power and Communication Cables............................................................................ 3-4 USB Cable .................................................................................................................................... 3-4 Standard RS-232 Cable ................................................................................................................ 3-5 RS-232 Pass-Through Cable ........................................................................................................ 3-5 Rebooting the Device .......................................................................................................................... 3-6 Warm Boot ................................................................................................................................... 3-6 Cold Boot...................................................................................................................................... 3-6 Using the Reset Switch................................................................................................................. 3-6 Screen Protector Replacement ............................................................................................................ 3-7 Maintenance ........................................................................................................................................ 3-8 IK8560 Technical Specifications ........…

Text truncated - open the document above for the full version.

Response to ATCB Comments FCC ID: HD585606065 1 Washington Laboratories, Ltd. 7560 LINDBERGH DRIVE GAITHERSBURG, MD 20879 (301) 417 – 0220 FAX # (301) 417 - 9069 July 17, 2006 Mr. Doug Noble American Telecommunications Certification Body Inc. 6731 Whittier Ave McLean, VA 22101 RE: Comments of July 11, 2006 APPLICATION: HD585606065 Hand Held Products Inc. Dear Mr. Noble: Below are the comments that you have provided regarding the application for certification referenced above. Our responses to those comments are in bold italic. Many responses refer you to additional exhibit(s) which has been uploaded to the application folder at the ATCB website. Thank you for your attention. Please feel free to contact us for any additional information that you may require. Regards, Gregory M. Snyder Chief EMC Engineer, Wireless/Telco Services Manager Brian J. Dettling Documentation Specialist WLL Project: 9177 1) For Industry Canada the model number must be displayed on the label along with the manufacturer and IC ID number. Please revise label and upload to label exhibit. (See RSS-GEN 2005 Section 5.2) R. Please see exhibit “IK8560 Label Location revised”. Page 1 indicates the mass produced label including the window for production printing of the model number, serial number, and barcode. Page 2 indicates the information to be production printed into the window. Page 3 represents a fully printed label in place on the device. 2) Please describe the antenna used for this configuration and add a photo of it to the internal photos exhibit. R. Please see exhibit IK8560 Internal Photos - Antenna. Response to ATCB Comments FCC ID: HD585606065 2 3) In the test report under spurious emissions table 7. You list the spurs as ambient? Were you unable to see the harmonic emission? Please explain (amb). Revise test report as necessary. R. No emissions were detected at the harmonic frequencies as indicated by “amb” indicating ambient only. Measurements of the ambient levels at the harmonic frequencies were made simply to show that the frequency was investigated.

100002114 REV#REV#REV DESCRIPTIONREV DESCRIPTION DESIGNED BY DESIGNED BY DATEDATE ARTWORK LEVEL ARTWORK LEVEL TITLE: TITLE: AA DRAWING NO: DRAWING NO: REVREV SCALESCALE DO NOT SCALEDO NOT SCALE SHEET SHEET 11 OF OF 11 DRAWING NO. DRAWING NO. DATE DATE A 500007116 RELEASE LABEL, TT8560 FCC A, EURO/US ADAPTUS (RADIO CARD, SYCHIP) 500007116 A ONE ECN#ECN# D.FLETCHER02/02/06 Notes : 1. COLORS: ALL GRAPHICS PANTONE PROCESS WHITE BACKGROUND: HAND HELD PRODUCTS BLUE GREY 2. REFERENCE PRO-E DRAWING 500004819 3. WINDOW TO REMAIN UNPRINTED 500000003564 02/22/06 THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY AND CONFIDENTIALTHESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY AND CONFIDENTIAL MATERIAL OF HAND HELD PRODUCTS, INC. AND SHALL NOT BEMATERIAL OF HAND HELD PRODUCTS, INC. AND SHALL NOT BE REPRODUCED, OR COPIED, OR USED AS A BASIS FOR MANUFACTURE OR SALEREPRODUCED, OR COPIED, OR USED AS A BASIS FOR MANUFACTURE OR SALE OF EQUIPMENT OR DEVICES WITHOUT WRITTEN PERMISSION. c OF EQUIPMENT OR DEVICES WITHOUT WRITTEN PERMISSION. c This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la E153740 Made in Taiwan www.handheld.com Hand Held Products, Inc. Skaneateles Falls, NY 13153 USA Classe A est conforme a la norme NMB-003 du Canada. Entrada: 12 V , 800mA 7D21 N10410 4. ROHS COMPLIANT INKS. SEE HAND HELD DOCUMENT #500007391 5. WHEELIE BIN MINIMUM SIZE .284H X .194W. !! 1317 FCC ID: HD585606065 IC: 1693B-85606065 Terminal de captura para Punto de Ventas

Document 9177-MPE, Rev. 0 FCC ID: HD585606065 IC ID: 1693B-85606065 RF Exposure Evaluation Washington Laboratories, Ltd July 6, 2006 Maximum Permissible Exposure Evaluation for Hand Held Products, Inc. IK8560 FCC ID: HD585606065 IC ID: 1693B-85606065 July 6, 2006 WLL PROJECT #: 9177 This report may not be reproduced, except in full, without the prior written consent of Washington Laboratories, Ltd. RF Exposure Evaluation Document 9177-MPE, Rev. 0 FCC ID: HD585606065 IC ID: 1693B-85606065 RF Exposure Evaluation Washington Laboratories, Ltd July 6, 2006 1 Maximum Permissible Exposure Evaluation for FCC ID: HD585606065 IC ID: 1693B-85606065 1.0 Introduction This report has been prepared on behalf of Hand Held Products, Inc. Model IK8560 Transmitter to show compliance with the RF exposure requirements as defined in FCC §1.1307. 1.1 Requirements Three different categories of transmitters are defined by the FCC in OET Bulletin 65. These categories are fixed installation, mobile, and portable and are defined as follows: ƒ Fixed Installations: fixed location means that the device, including its antenna, is physically secured at a permanent location and is not able to be easily moved to another location. Additionally, distance to humans from the antenna is maintained to at least 2 meters. ƒ Mobile Devices: a mobile device is defined as a transmitting device designed to be used in other than fixed locations and to be generally used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter's radiating structures and the body of the user or nearby persons. Transmitters designed to be used by consumers or workers that can be easily re-located, such as a wireless modem operating in a laptop computer, are considered mobile devices if they meet the 20 centimeter separation requirement. The FCC rules for evaluating mobile devices for RF compliance are found in 47 CFR §2.1091. ƒ Portable Devices: a portable device is defined as a transmitting device designed to be used so that the radiating structure(s) of the device is/are within 20 centimeters of the body of the user. Portable device requirements are found in Section 2.1093 of the FCC's Rules (47 CFR§2.1093). For this Evaluation the Hand Held Products, Inc. IK8560 is classified as a Mobile Device and therefore must meet the limits as specified in §1.307. The FCC also categorizes the use of the device as based upon the user’s awareness and ability to exercise control over his or her exposure. The two categories defined are Document 9177-MPE, Rev. 0 FCC ID: HD585606065 IC ID: 1693B-85606065 RF Exposure Evaluation Washington Laboratories, Ltd July 6, 2006 2 Occupational/Controlled Exposure and General Population/Uncontrolled Exposure. These two categories are defined as follows: ƒ Occupational/Controlled Exposure: In general, occupational/controlled exposure limits are applicable to situations in which persons are exposed as a consequence of their employment, who have been made fully aware of the potential for exposure and can exercise control over their exposure. This exposure category is also applicable when the exposure is of a transient nature due to incidental passage through a location where the exposure levels may be higher than the general population/uncontrolled limits, but the exposed person is fully aware of the potential for exposure and can exercise control over his or her exposure by leaving the area or by some other appropriate means. Awareness of the potential for RF exposure in a workplace or similar environment can be provided through specific training as part of a RF safety program. If appropriate, warning signs and labels can also be used to establish such awareness by providing prominent information on the risk of potential exposure and instructions on methods to minimize such exposure risks. ƒ General Population/Uncontrolled Exposure: The general population / uncontrolled exposure limits are applicable to situations in which the general public may be exposed or in which persons who are exposed as a consequence of their employment may not be made fully aware of the potential for exposure or cannot exercise control over their exposure. Members of the general public would come under this category when exposure is not employment-related; for example, in the case of a wireless transmitter that exposes persons in its vicinity. Warning labels placed on low-power consumer devices such as cellular telephones are not considered sufficient to allow the device to be considered under the occupational/controlled category, and the general population/uncontrolled exposure limits apply to these devices. Since there are no warnings or training associated with this unit and it can be used by anyone, the Hand Held Products, Inc. IK8560 is evaluated to the General Population/Uncontrolled Exposure limits. 1.2 Radio Frequency Radiation Exposure Evaluation The highest RF output power of the unit was measured at 14dBm at 2412 MHz. According to §1.1310 of the FCC rules, the power density limit for General Population/Uncontrolled Exposure is 1mW/cm 2 . To comply with the exposure limits for this section, individuals must maintain a safe distance from the transmit antenna. The following formula was used to calculate the minimum safe distance: 2 4R PG S π = Where: Document 9177-MPE, Rev. 0 FCC ID: HD585606065 IC ID: 1693B-85606065 RF Exposure Evaluation Washington Laboratories, Ltd July 6, 2006 3 S = Power Density P = Output Power at the Antenna Terminals G = Gain of Transmit Antenna (linear gain) R = Distance from Transmitting Antenna For this device, the calculation is as follows: S = FCC Limit = 1mW/cm 2 P = Output Power = 25.12 mW G = Worst Case Gain = 1.5dBi = INVLOG(1.5/10) = 1.41 Based on the 20cm spacing distance for mobile devices the following Power Density is calculated: S = (25.12 x 1.41)/(4 x π x 20 2 ) = 0.007 mW/cm 2 (Base on continuous transmission) Based on the calculation above, the IK8560…

Text truncated - open the document above for the full version.

FCC & Industry Canada Certification Test Report For the Hand Held Products, Inc. IK8560 FCC ID: HD585606065 IC ID: 1693B-85606065 WLL JOB# 9177 June 22, 2006 Prepared for: Hand Held Products, Inc. 700 Visions Drive Skaneateles Falls, NY 13153 Prepared By: Washington Laboratories, Ltd. 7560 Lindbergh Drive Gaithersburg, Maryland 20879 Hand Held Products, Inc. IK8560 FCC Certification Test Report June 2006 FCC & Industry Canada Certification Test Report for the Hand Held Products, Inc. IK8560 FCC ID: HD585606065 IC ID: 1693B-85606065 June 22, 2006 WLL JOB# 9177 Prepared by: Brian J. Dettling Documentation Specialist Reviewed by: Gregory M. Snyder Chief EMC Engineer Hand Held Products, Inc. IK8560 FCC Certification Test Report June 2006 WLL Report #9177-01 - ii - © 2006 Washington Laboratories, Ltd. Abstract This report has been prepared on behalf of Hand Held Products, Inc. to support the attached Application for Equipment Authorization. The test report and application are submitted for a DTS Transmitter under Part 15.247 of the FCC Rules and Regulations and Spectrum Management and Telecommunications Policy RSS-210 and RSS-GEN of Industry Canada.. This Certification Test Report documents the test configuration and test results for a Hand Held Products, Inc. Model IK8560 . Testing was performed on an Open Area Test Site (OATS) of Washington Laboratories, Ltd, 7560 Lindbergh Drive, Gaithersburg, MD 20879. Site description and site attenuation data have been placed on file with the FCC's Sampling and Measurements Branch at the FCC laboratory in Columbia, MD. The Industry Canada OATS numbers are 3035A-1 and 3035A-2 for Washington Laboratories, Ltd. Site 1 and Site 2, respectively. Washington Laboratories, Ltd. has been accepted by the FCC and approved by NIST NVLAP (NVLAP Lab Code: 200066-0) as an independent FCC test laboratory. The Hand Held Products, Inc. IK8560 complies with the limits for a DTS Transmitter device under FCC Part 15.247 and Industry Canada RSS-210 and RSS-GEN. Hand Held Products, Inc. IK8560 FCC Certification Test Report June 2006 WLL Report #9177-01 - iii - © 2006 Washington Laboratories, Ltd. Table of Contents Abstract ........................................................................................................................................... ii 1 Introduction..........................................................................................................................1 1.1 Compliance Statement .....................................................................................................1 1.2 Test Scope ........................................................................................................................1 1.3 Contract Information........................................................................................................1 1.4 Test Dates ........................................................................................................................1 1.5 Test and Support Personnel .............................................................................................1 1.6 Abbreviations ...................................................................................................................2 2 Equipment Under Test .........................................................................................................3 2.1 EUT Identification & Description ...................................................................................3 2.2 Test Configuration ...........................................................................................................3 2.3 Testing Algorithm............................................................................................................4 2.4 Test Location ...................................................................................................................4 2.5 Measurements ..................................................................................................................4 2.5.1 References....................................................................................................................4 2.6 Measurement Uncertainty................................................................................................4 3 Test Equipment ....................................................................................................................5 4 Test Results ..........................................................................................................................6 4.1 RF Power Output: (§15.247(b) and RSS-210, A8.4).......................................................6 4.2 Occupied Bandwidth: (§15.247(a)(2) and RSS-210 Section A8.2).................................7 4.3 RF Peak Power Spectral Density (§15.247(e) and RSS-210, Annex 8.2) .....................11 4.4 Conducted Spurious Emissions at Antenna Terminals (FCC Part §15.247(d) and RSS- 210, A8) .....................................................................................................................................15 4.5 Radiated Spurious Emissions: (FCC Part §2.1053).......................................................27 4.5.1 Test Procedure.........................................................................................................27 4.6 AC Powerline Conducted Emissions: (FCC Part §15.207 and RSS-GEN)...................31 List of Tables Table 1. Device Summary............................................................................................................... 3 Table 2: Test Equipment List.......................................................................................................... 5 Table 3: RF Power Output .............................................................................................................. 6 Table 4: Occupied Bandwidth Results.......................................................................................... 11 Table 5: RF Power Spect…

Text truncated - open the document above for the full version.