HD588352802.11b Wireless LAN Module

1 Dr a f t 4 / 1 / 0 4 TT8870-352 Wireless Module User’s Guide Components The TT8870-352 wireless module consists of the following components: The TT8870-352 wireless module is primarily designed to use Cisco Aironet™ 350 Series with HHP Transaction Terminal product family, TT88XX. FCC Information Per FCC rules, it is not permissible to provide information to the end user on how to install and uninstall/remove the module. FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. According to FCC 15.21, changes or modifications to the device not expressly approved by HHP (the party responsible for compliance) could void the user's authority to operate the equipment. Caution: This device is classified as a mobile device according to FCC RF Exposure requirements. This device must be installed with no less than 20cm of separation between the device and operators. FCC ID: HD588352 HHP Part Number Part NameAdditional Part Information Comments 80000382-USPC Card 350Cisco Aironet 350 Series, 2.4 Ghz 500000882Antenna, TT8870Centurion Wireless Technologies, CAF 94627 Peak gain 1.5 dBi 500001823TT8870-352 wireless module label 500000XXXTT8870-352 FCC label 2TT8870-352 Wireless Module User’s Guide TT8870-352 Label Location TT8870-352 Wireless Module User’s Guide3 Wireless Module Operation 1. The wireless transmitter and antenna form the wireless module. These components of the module must remain the same. 2. Further instructions on the module are provided in the Cisco Aironet 350 Series User Guide. Contact Information If you need assistance installing or troubleshooting your wireless module, please call your Distributor or the nearest HHP technical support office listed below. You can also get help at our website at www.hhp.com. North America/Canada: HHP 700 Visions Drive P. O . B o x 2 0 8 Skaneateles Falls, NY 13153-0208 Telephone:(315) 685-2476, Option 4 (8 a.m. to 6 p.m. EST) or in the U.S.(800) 782-4263 Fax number:(315) 685-4960 E-mail:[email protected] Europe, Middle East, and Africa: Telephone- European Ofc: Int+31 (0) 40 29 01 600 U.K. Ofc:Int+44 1925 240055 E-mail:[email protected] Asia: Telephone:Int+852-2511-3050 or 2511-3132 E-mail:[email protected] Latin America: Telephone:(239) 263-7600 E-mail:[email protected] Disclaimer Hand Held Products, Inc. d/b/a HHP (“HHP”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HHP to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HHP. HHP shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. This document contains proprietary information which is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HHP. © 2001-2004 Hand Held Products, Inc. All rights reserved. Web Address: www.HHP.com TT8870-RF-UG Rev (a)

H~ Corporate Headquarters . - Hand Held Products, Inc. 700 Visions Drive Upgrade your image.TM PO Box 208 Skaneateles Falls, NY 13153-0208 USA + 1 800-782-4263 (North America Only) + 1 315-685-8945 www.hhp.com Fax: + 1 315-685-0049 Date 3/22/04 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite ClIO McLean, VA 22101 To Whom It May Concern: The TT8870 Radio module does not contain any user tunable parts. Hence no tune up procedure is required. Thank you for your attention to this matter. Signatory tI '" i ~~..eJ\I1 V ~ Naveen Velagapudi Compliance Engineer 3156852931 E-mail: [email protected] HHP Charlotte, NC HHP Europe HHP France HHP Brazil HHP Asia Phone:+1800-782-4263 Phone:+31 (0)402424486 Phone:+33(OjI46104111 Rio de Janeiro Phone:+S5225113050 (No'th America Oniy) Ph. 55(21)249470601 7049983834HHPUKHHPL. A. one.+- + - - at/n mer/ca 5PIHHPJapan ao auo HHP Bushnell's Basin,NY Phone +44 (0) 1925240055 Phone:+l 239-263-7600 Phone:+55(11) 5016-3459 Phone:+81 352127392 Phone: + 1-800-782-4263 (Na'thAmericaOniy) +1 ~1~-Qe~-e~4~ 1

Corporate Headquarters Hand Held Products, Inc. 700 Visions Drive PO Box 208 Skaneateles Falls, NY 13153-0208 USA +1800-782-4263 (NOII1I-~) +1315-685-8945 Fax: + 1 315-685-0049 Upgrade your image. www.hhp.com Request for Confidentiality Date: 3/22/04 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite ClIO McLean, VA 22101 RE: FCCffi: Certification Application HD588352 Please be advised that the following exhibits are be held confidential on behalf of HandHeld Products, Inc. d/b/a HHP: 17 8870 Schematics, Block Diagram, and Parts List The application contains technical information that HandHeld Products, Inc. d/b/a HHP deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Signatory r\ ~ ~ /lJOJI Q.tN1 Naveen Velagapudi Compliance Engineer 3156852931 E-mail: [email protected] HHP Charlotte, NC Phone: +1800-782-4263 (HorIlIAmorKIJ()rIy) + 1 704-998-3834 HHP 8ushnell's 8asin, NY Phone: + 1-800-782-4263 --()rIy) +1 315~5-894S HHP Europe Phone: +31 (0)402424486 HHP UK Phone +44 (0) 1925 240055 HHPFrance Phone: +33 (0) 1 46104111 HHP Latin AnIeIicG Phone:+1239-263-7600 HHP8I8B Rio de Janeiro Phone:+55(21) 2494-7060 s.o Paulo Phone:+55(11) 5016-3459 HHP AsIa Phone: +85 2 2511 3050 HHP Japan Phone: +81 352127392

Corporate Headquarters Hand Held Products, Inc. 700 Visions Drive PO Box 208 Skaneateles Falls, NY 13153-0208 U5A + 1 800-782-4263 (Nonh NntrlaI CXrIyI +1315-685-8945 Fax:+1315-685-0049 Upgrade your image. www.hhp.com Letter Of Agency Date 3/22/04 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite ClIO McLean, VA 22101 To Whom It May Concern: Please be advised that HandHeld Products, Inc. d/b/a HHP authorizes Washington Laboratories, Ltd. to act on our behalf, until otherwise notified, for applications submitted to American Telecommunications Certification Body, Inc. (ATCB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, V.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you for your attention to this matter. Signatory HaM ~ . N aveen Velagapudi Compliance Engineer 3156852931 E-mail: [email protected] HHP Chorion., NC Phone: +1 800-782-4263 (""'iliA_Only) +1704-996-3834 HHP BusINIeIrs .."., NY Phone: +1-800-782-4263 --Only) +1315-685-8945 ""P ".., Rio de Janeiro Phone: +55(21) 2494-7(KjO Sao Paulo Phone:+55(11) 5016-3459 HHP Asicr Phone:+852251130S0 HHPJapan Phone: +81 352127392 HHP Europe Phone: +31 (0)402424486 HHPUK Phone +44 (0) 1925 240055 HHPFran« Phone: +33 (0) 1 46104111 HHP LGtln AmeriC4 Phone:+1239-263-7600

H~ Corporate Headquarters . - Hand Held Products, Inc. 700 Visions Drive Upgrade your image.1M PO Box 208 Skaneateles Falls, NY 13153-0208 USA + 1 800-782-4263 (North Americo Only) +1315-685-8945 www.hhp.com Fax:+1315-685-0049 Subject: Modular Approval Request FCC ill: HD588352 3/31/04 Dear Application Examiner, Handheld Products, mc. d/b/a HHP, TI'8870-352 wireless module, FCC ill: HD588352 would like to have your authorization as a modular approval. The requirements of Public Notice DAOO- 1407 have been met and shown on the following statements. 1. "The modular transmitter must have its own RF shielding." The radio portion of this module has been shielded, please see exhibition External Photo. 2. "The modular transmitter must have buffered modulation/data inputs." The TI'8870-352 wireless module contains buffered data inputs; it is integrated in HHP partnumber 80000382-US, PC Card 350. This is the partnumber for Cisco Aironet 350 Series radio with FCC ill: LDK102040. 3. "The modular transmitter must have its own power supply regulation." The TI'8870-352 wireless module contains a regulator in the DC input port, in HHP partnumber 80000382-US, PC Card 350. This is the partnumber for Cisco Aironet 350 Series radio with FCC ill: LDKI02040. 4. "The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C)." The TI'8870-352 wireless module meets the FCC antenna requirements. The spurious emission, ~que antenna connector and photo of antennas are shown in the application exhibits. 5. "The modular transmitter must be tested in a stand-alone configuration" The TI'8870-352 wireless module was tested in a stand-alone configuration via a PCMCIA adapter card. Please see exhibit "Test Setup Photos". 6. "The modular transmitter must be labeled with its own FCC ill number." Please see exhibit "FCC Label" for the FCC ill of this module. 7. "The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements." The TI'8870-352 wireless module is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. Page 1 of 2 HHP Charlatte, NC HHP Europe HHP France HHP Brazil HHP AsIa Phone:+1800-782-4263 Phone:+31 (0)402424486 Phone:+33(0)146104111 Rio de Janeiro Phone:+8522S1130S0 (North America Only) Phone" +55(21) 2494-7060 +1704-998-3834 HHPUK HHPLafinAmerica 5P" IHHPJapan ao auo HHP Bushnell's BasinrNY Phone +44 (0) 1925240055 Phone: + 1 239-263-7600 Phone:+55(11) 5016-3459 Phone:+81 352127392 Phone: +1-800-782-4263 (North Americo Only) +1315-685-8945 i H~ Corporate Headquarters . Hand Held Products, Inc. 700 Visions Drive Upgrade your image.1M PO Box 208 Skaneatele5 Falls, NY 13153-0208 USA + 1 800-782-4263 (North America Only) +1315-685-8945 www.hhp.com Fax: + 1 315-685-0049 (continued from page I) 8. "The modular transmitter must comply with any applicable RF exposure requirements." The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the exhibit "MPE Data". Please contact me if you have any further questions. ~ank you for your attention. ,tV~ Ye;I(Afl1~ Naveen Velagapudi Compliance Engineer HandHeld Products, Inc. d/b/a HHP Phone: 315 685 2931 E mail: [email protected] , Page 2 of2 ! HHP Charlotte, NC HHP Europe HHP France HHP Brazil HHP Asia Phone:+1800-782-4263 Phone:+31 (0)402424486 Phone:+33(0)146104111 Rio de Janeiro Phone:+85225113050 !INorrhAmericoOnly)Ph.55(21)2494-7060+ 1 704-998-3834 HHP UK HHP Latin America 5 onpe. + ,HHP Japan ao au 0 HHP Bushnell's Basin, NY Phone +44 (0) 1925 240055 Phone:+ 1 239-263-7600 Phone:+55(11) 5016-3459 Phone:+81 352127392 Phone: + 1-800-782-4263 INorthAmericoOnly) t1315-685-8945 I

TT8870-352 Wireless Module Back with FCC Statement TT8870-352 Wireless Module Front with FCC ID Label

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired 1.75 in. REF 1.55 in. REF THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY AND CONFIDENTIALTHESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY AND CONFIDENTIAL MATERIAL OF HAND HELD PRODUCTS, INC. AND SHALL NOT BEMATERIAL OF HAND HELD PRODUCTS, INC. AND SHALL NOT BE REPRODUCED, OR COPIED, OR USED AS A BASIS FOR MANUFACTURE OR SALEREPRODUCED, OR COPIED, OR USED AS A BASIS FOR MANUFACTURE OR SALE OF EQUIPMENT OR DEVICES WITHOUT WRITTEN PERMISSION. c OF EQUIPMENT OR DEVICES WITHOUT WRITTEN PERMISSION. c REV#REV#REV DESCRIPTIONREV DESCRIPTION DESIGNED BY DESIGNED BY DATEDATE ARTWORK LEVEL ARTWORK LEVEL TITLE: TITLE: AA DRAWING NO: DRAWING NO: REVREV SCALESCALE DO NOT SCALEDO NOT SCALE SHEET SHEET 11 OF OF 11 DRAWING NO. DRAWING NO. DATE DATE 500000XXX PRELIMINARY LABEL, TT8870 FCC 500000xxx 01 ONE ECN#ECN# 04/01/04 D.FLETCHER 04/01/04 NOTES : 1. MATERIAL: THERMAL PRINTED POLYESTER: TBD 2. ALL PRINTING BLACK 500000000XXX 01

NOTES: 1. Graphics to be black 2. Reference Pro-E drawing XXXXXXXXXX, Rev TBD For Thermal Printed (THT) material and size MATRL # TBD TT8870-352 Wireless Module FCC ID: HD588352 Hand Held Products, Inc. Skaneateles Falls, NY 13153 USA REV#REV#REV DESCRIPTIONREV DESCRIPTION DESIGNED BY DESIGNED BY DATEDATE ARTWORK LEVEL ARTWORK LEVEL TITLE: TITLE: AA DRAWING NO: DRAWING NO: REVREV SCALESCALE DO NOT SCALEDO NOT SCALE SHEET SHEET 11 OF OF 11 DRAWING NO. DRAWING NO. DATE DATE 50000XXXX PRELIMINARY 50000XXXX 01 ONE ECN#ECN# 03/30/04 D.FLETCHER 03/30/04 50000000XXXX A LABEL, TT8870-352 WIRELESS MODULE THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY AND CONFIDENTIALTHESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY AND CONFIDENTIAL MATERIAL OF HAND HELD PRODUCTS, INC. AND SHALL NOT BEMATERIAL OF HAND HELD PRODUCTS, INC. AND SHALL NOT BE REPRODUCED, OR COPIED, OR USED AS A BASIS FOR MANUFACTURE OR SALEREPRODUCED, OR COPIED, OR USED AS A BASIS FOR MANUFACTURE OR SALE OF EQUIPMENT OR DEVICES WITHOUT WRITTEN PERMISSION. c OF EQUIPMENT OR DEVICES WITHOUT WRITTEN PERMISSION. c

AIR-LMC/PCM350 AIR-LMC/PCM350

Cisco Confidential 1 1/25/2002 Radio Circuit Description The Mercury Spread Spectrum Transceiver operates in the 2.4 Ghz ISM band, using Direct Sequence modulation techniques. The transmit/receive and data packetization operations are under the control of a protocol processor (MAC) internal to the transceiver assembly. Logic Section : A digital ASIC is employed in the logic section of the radio, providing the following functions: 1) Generation of the spreading code, combination of the code with the incoming data stream. 2) Despreading and demodulation of the incoming baseband spread signal. 3) Determination of the transmit/receive sequence. RF Section (refer to Mercury radio block diagram) : The transmitter chain includes a shaping bandpass filter followed by a vector modulator. This signal is further filter by a saw filter at the IF frequency of 374 Mhz. This signal is then mixed up to the 2400-2483.5 Mhz band. A RF filter at the output of the mixer removes any other mixing products. A power amplifier chain brings the signal up to the final output level of 100 mwatts. Through the TX/RX switch, the signal is passed through a dielectric bandpass filter to the antenna port. The radio has diversity, so two antenna ports are provided. Transmitter frequency is determined by the 44.0 Mhz reference oscillator, with +/- 25 ppm accuracy. The receiver utilizes the same antenna filtering and TX/RX, followed by a LNA. A mixer circuit brings the signal to the 374 Mhz IF, where a SAW filter shapes the IF spectral envelope. This filter provides the primary rejection against adjacent channel interference. An IF amplifier followed by an IF limiter brings the signal up to the level needed for the I and Q vector demodulator. A buffer amplifier and filter are used to shape the signal for the PHY digital ASIC which despreads and decodes the signal. The 374 Mhz voltage controlled oscillator is controlled by a synthesizer/PLL system comprised of a prescaler and programmable dividers. The 2026-2450 Mhz voltage controlled oscillator is also controlled by a synthesizer/PLL system. Both local oscillators use a reference signal for the PLL which is derived from the 44.0 Mhz master reference oscillator.

Hand Held Products Job # 8001x RF Exposure measurement 4/1/04, Steve Koster. The Hand Held Products TT8870-352 Radio Card was tested to show compliance with the RF Exposure requirements. The antenna was placed on a non-conductive support and measurements were taken at 20 cm around the antenna. The worst case measurement was 0.015 mW/cm 2 . This is under the general exposure limit of 1 mW/cm 2 and therefore complies with the requirement. The measurement was taken with the Wandel & Golterman e-field probe. The probe calibration is due 8/27/04. See below for test setup photographs. 7560 Lindbergh Drive Gaithersburg, Maryland 20879 (301) 417-0220 Fax (301) 417-9069 (800) 839-1649 website: http://www.wll.com email: [email protected]

Document 8001-01, Rev. 2 FCC Certification Test Report Washington Laboratories, Ltd March 2004 FCC Certification Test Report for Hand Held Products, Inc. FCC ID: HD588352 March 31, 2004 Prepared for: Hand Held Products, Inc. 700 Visions Drive Skaneateles Falls, NY 13153-0208 Prepared By: Washington Laboratories, Ltd. 7560 Lindbergh Drive Gaithersburg, Maryland 20879 FCC Certification Test Report Document 8001-01, Rev. 2 FCC Certification Test Report Washington Laboratories, Ltd March 2004 FCC Certification Test Report for the Hand Held Products, Inc. TT8870-352 Radio Card FCC ID: HD588352 WLL JOB# 8001 Prepared by: Brian J. Dettling Documentation Specialist Reviewed by: Steven D. Koster EMC Operations Manager Document 8001-01, Rev. 2 FCC ID: HD588352 FCC Certification Test Report Washington Laboratories, Ltd March 2004 ii Abstract This report has been prepared on behalf of Hand Held Products, Inc. to support the attached Application for Equipment Authorization. The test report and application are submitted for a Spread Spectrum Transceiver under Part 15.247 of the FCC Rules and Regulations. This Federal Communication Commission (FCC) Certification Test Report documents the test configuration and test results for a Hand Held Products, Inc. TT8870- 352 Radio Card. Hand Held Products wishes to have this device approved as a module. An Attestation letter and required consumer information are found in the exhibits related to this application. Testing was performed on an Open Area Test Site (OATS) of Washington Laboratories, Ltd, 7560 Lindbergh Drive, Gaithersburg, MD 20879. Site description and site attenuation data have been placed on file with the FCC's Sampling and Measurements Branch at the FCC laboratory in Columbia, MD. Washington Laboratories, Ltd. has been accepted by the FCC and approved by NIST NVLAP (NVLAP Lab Code: 200066-0) as an independent FCC test laboratory. The Hand Held Products 8870 Radio Card is an IEEE 802.11/802.11b compliant device and complies with the limits for a Direct Sequence Spread Spectrum Transmitter device under Part 15.247 of the FCC Rules and Regulations. The radio transmitter in this device is based on a Certified module listed under FCC ID: LDK102040. Document 8001-01, Rev. 2 FCC ID: HD588352 FCC Certification Test Report Washington Laboratories, Ltd March 2004 iii Table of Contents Abstract ............................................................................................................................... ii 1 Introduction..............................................................................................................1 1.1 Compliance Statement .........................................................................................1 1.2 Test Scope ............................................................................................................1 1.3 Contract Information............................................................................................1 1.4 Test Dates ............................................................................................................1 1.5 Test and Support Personnel .................................................................................1 1.6 Abbreviations .......................................................................................................2 2 Equipment Under Test .............................................................................................3 2.1 EUT Identification & Description .......................................................................3 2.2 Test Configuration ...............................................................................................3 2.3 Testing Algorithm................................................................................................3 2.4 Test Location .......................................................................................................3 2.5 Measurements ......................................................................................................4 2.5.1 References........................................................................................................4 2.6 Measurement Uncertainty....................................................................................4 3 Test Equipment ........................................................................................................5 4 Test Results ..............................................................................................................6 4.1 RF Power Output: ................................................................................................6 4.2 RF Power Spectral Density..................................................................................6 4.3 Occupied Bandwidth............................................................................................9 4.4 Spurious Emissions at Antenna Terminals (FCC Part §15.247(b))...................11 4.5 Radiated Spurious Emissions: (FCC Part §15.247(c)) ......................................20 4.5.1 Test Procedure ...............................................................................................20 4.6 Band Edge Measurements..................................................................................24 4.7 AC Powerline Conducted Emissions: (FCC Part §15.207) ...............................26 Document 8001-01, Rev. 2 FCC ID: HD588352 FCC Certification Test Report Washington Laboratories, Ltd March 2004 iv List of Tables Table 1. Device Summary................................................................................................... 3 Table 2: Test Equipment List............................................................................................. 5 Table 3. RF Power Output .................................................................................................. 6 Table 4. RF Power Spectral Density.....................................................................…

Text truncated - open the document above for the full version.

Radiated Emissions Test Configuration Conducted Emissions Test Configuration