HED-ML6035Metrolinq Outdoor 60GHz PTP + 5 GHz

Welcome t o MetroLinq TM Interference-Free Gigabit Wireless ignitenet.com Unboxing After opening the box, you will find... • MetroLinq TM • Bracket Kit • POE Power Supply • Power Cable Tools/Items Required • 13 mm Socket Wrench • Flat-Head Screwdriver • Ethernet Cables • (Optional) Alignment Scope ICC-SCOPE-9x50 ignitenet.com2 For helpful training and user-case information, please go to ignitenet.com/support ignitenet.com3 Assembly The MetroLinq™ bracket is designed for wall and pole mounting (25mm - 75mm pole diameter). Choose what is best for your location and select hardware accordingly. 1. Ensure all four position-locking bolts are tight before installing. 2. Install the bracket onto MetroLinq™ using four M8 bolts, lock washers, and flat washers. Power Up 1. Connect an Ethernet cable from the MetroLinq™ WAN port (right-side RJ-45) to the POE port on the power supply. 2. Connect Ethernet cable from the “LAN” port on the power supply to your LAN device. 3. Connect the power cord to a nearby AC power source. ignitenet.com4 Alignment IgniteNet strongly recommends using the ICC-SCOPE-9x50 Alignment Scope for alignment. To install, place the scope on top of the MetroLinq™ housing and secure it with its thumb screw. ignitenet.com5 Note: Do not adjust bolts A and B without first loosening 1 and 4 respectively. ! 1. Loosen coarse adjustment bolts 2 and 3 and set initial alignment. Don’tworry, you don’t have to be too accurate yet. After you have set the coarse alignment, tighten bolts 2 and 3. 2. Loosen the horizontal fine-tune adjustment bolt 4. Use fine-tune bolt "B" to optimize the horizontal position. Re-tighten bolt 4. 3. Loosen the vertical fine-tune adjustment bolt 1. Use fine-tune bolt "A" to optimize the vertical position. Re-tighten bolt 1. 4. Initial alignment should be based on optical or visual alignment. After you achieve this, repeat steps 2 and 3 while watching the 60 GHz ignal strength LED. Optimize position to the LED indicator. 5. Ensure all bolts are fully tightened, remove the alignment scope (if installed), and enjoy Gigabit interference-free wireless. B 14 A 23 ignitenet.com6 1. Loosen coarse adjustment bolts 2 and 3 and set initial alignment. Don’tworry, you don’t have to be too accurate yet. After you have set the coarse alignment, tighten bolts 2 and 3. 2. Loosen the horizontal fine-tune adjustment bolt 4. Use fine-tune bolt "B" to optimize the horizontal position. Re-tighten bolt 4. 3. Loosen the vertical fine-tune adjustment bolt 1. Use fine-tune bolt "A" to optimize the vertical position. Re-tighten bolt 1. 4. Initial alignment should be based on optical or visual alignment. After you achieve this, repeat steps 2 and 3 while watching the 60 GHz ignal strength LED. Optimize position to the LED indicator. 5. Ensure all bolts are fully tightened, remove the alignment scope (if installed), and enjoy Gigabit interference-free wireless. Software 1. To configure your MetroLinq, connect your computer to the LAN port on the device and configure the IP subnet to match the default IP address of 192.168.1.20 Once configured, direct your web browser to 192.168.1.20 and log in. username: root password: admin123 2. After you have logged in, follow the steps in the Setup Wizard to configure the device for your network. For more configuration details and training, please go to ignitenet.com/support 150200001244A R01 FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 250 cm between the radiator & your body. Antenna list: Ant. Brand P/N Antenna Ty p e Connector Antenna Gain (dBi) Cable Loss (dB) Tr u e Gain (dBi) Remark 1 IgniteNet FS5-19N-120 Sector Ant. (PATCH ARRAY) Type-N 19 1 18 External (5GHz use) Gain (dBi) Ant. Brand P/N Antenna Ty p e Connector Band 1 Band 4 Remark 2 Accton 123400001084A Dish Ant. N/A 12.33 15.35 Internal (5G&60G use) Professional installation instruction: 1. Installation personal This product is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The general user shall not attempt to inst…

Text truncated - open the document above for the full version.

Accton Technology Corp No. 1, Creation Rd. III, Science-based Industrial Park Hsin Chu 30077, Taiwan Confidentiality Request Letter Date: 2015/12/29 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID：HED-ML6035 To Whom It May Concern: Long Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby respectfully request confidential treatment of information accompanying this application as outlined below: ● Block Diagrams ● Schematics ● Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We understand that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Applicant’s company name : Accton Technology Corp Applicant’s company address : No. 1, Creation Rd. III, Science-based Industrial Park Hsin Chu 30077, Taiwan Signature : Name and Job Title : Mike Peng / Manager E-Mail : [email protected] Tel : 886-3-577-0270 #1874 Fax : 886-3-578-7550

Accton Technology Corp No. 1, Creation Rd. III, Science-based Industrial Park Hsin Chu 30077, Taiwan DoC Attestation Letter Date: 2015/12/29 We Accton Technology Corp, as the grantee of this project (FCC ID: HED-ML6035 / Brand Name: IgniteNet / Model No.: ML-60-35, ML-60-35-1), would like to declare that the composite portion categorized as computer peripheral has been authorized under the Declaration of Conformity procedures (Sporton report No.: FD5N2614, FCC designation number : TW1024). The final product shall consequently comply with the FCC rule applied for DoC Procedure. Regards, FCC Grantee contact person information. Applicant’s company name : Accton Technology Corp Applicant’s company address : No. 1, Creation Rd. III, Science-based Industrial Park Hsin Chu 30077, Taiwan Signature : Name and Job Title : Mike Peng / Manager E-Mail : [email protected] Tel : 886-3-577-0270 #1874 Fax : 886-3-578-7550

Accton Technology Corp No. 1, Creation Rd. III, Science-based Industrial Park Hsin Chu 30077, Taiwan Power of Attorney Date: 2015/12/29 Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Sporton International Inc. Address : No.8, Lane 724, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C. Name : Leo Huang Job Title : Manager e-mail : [email protected] I am therefore responsible for the contents of the application. Brand name and model type of the specified radio equipment: IgniteNet / ML-60-35, ML-60-35-1 FCC ID: HED-ML6035 Product name: Metrolinq Outdoor 60GHz PTP + 5 GHz FCC Grantee contact person information. Applicant’s company name : Accton Technology Corp Applicant’s company address : No. 1, Creation Rd. III, Science-based Industrial Park Hsin Chu 30077, Taiwan Signature : Name and Job Title : Mike Peng / Manager E-Mail : [email protected] Tel : 886-3-577-0270 #1874 Fax : 886-3-578-7550

Report No.:5N2614 SPORTON International Inc. PAGE NUMBER : 1 of 6 TEL : 886-3-327-3456 ISSUED DATE : Dec. 29, 2015 FAX : 886-3-327-0973 Photographs of EUT Model Name: ML-60-35-1 Report No.:5N2614 SPORTON International Inc. PAGE NUMBER : 2 of 6 TEL : 886-3-327-3456 ISSUED DATE : Dec. 29, 2015 FAX : 886-3-327-0973 Report No.:5N2614 SPORTON International Inc. PAGE NUMBER : 3 of 6 TEL : 886-3-327-3456 ISSUED DATE : Dec. 29, 2015 FAX : 886-3-327-0973 Report No.:5N2614 SPORTON International Inc. PAGE NUMBER : 4 of 6 TEL : 886-3-327-3456 ISSUED DATE : Dec. 29, 2015 FAX : 886-3-327-0973 Model Name: ML-60-35 Ant. 1 Report No.:5N2614 SPORTON International Inc. PAGE NUMBER : 5 of 6 TEL : 886-3-327-3456 ISSUED DATE : Dec. 29, 2015 FAX : 886-3-327-0973 Report No.:5N2614 SPORTON International Inc. PAGE NUMBER : 6 of 6 TEL : 886-3-327-3456 ISSUED DATE : Dec. 29, 2015 FAX : 886-3-327-0973

Model : ML-60-35 Input Voltage Range : 24V , 1A FCC ID : HED-ML6035 IC : XXXX-XXXX Made in XXXXX 246000001492A R01 XX XX 5 5 5 40x15mm (Adhesive location) This device complies with par t 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 5GHzReset ETH1 USBDC Out 5GHz 6.0 mm 8.0 mm Metrolinq Outdoor 60GHz PTP + 5 GHz ETH0 PoE IN 'PATENTS PENDING' Model : ML-60-35 Input Voltage Range : 24V , 1A FCC ID : HED-ML6035 IC : XXXX-XXXX Made in XXXXX 246000001492A R01 XX XX 5 5 5 40x15mm (Adhesive location) This device complies with par t 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 5GHzReset ETH1 USBDC Out 5GHz 6.0 mm 8.0 mm Metrolinq Outdoor 60GHz PTP + 5 GHz ETH0 PoE IN 'PATENTS PENDING'

Report No.:5N2614 SPORTON International Inc. PAGE NUMBER : 1 of 18 TEL : 886-3-327-3456 ISSUED DATE : Dec. 29, 2015 FAX : 886-3-327-0973 Photographs of EUT Model Name: ML-60-35-1 Report No.:5N2614 SPORTON International Inc. PAGE NUMBER : 2 of 18 TEL : 886-3-327-3456 ISSUED DATE : Dec. 29, 2015 FAX : 886-3-327-0973 Report No.:5N2614 SPORTON International Inc. PAGE NUMBER : 3 of 18 TEL : 886-3-327-3456 ISSUED DATE : Dec. 29, 2015 FAX : 886-3-327-0973 Report No.:5N2614 SPORTON International Inc. PAGE NUMBER : 4 of 18 TEL : 886-3-327-3456 ISSUED DATE : Dec. 29, 2015 FAX : 886-3-327-0973 Report No.:5N2614 SPORTON International Inc. PAGE NUMBER : 5 of 18 TEL : 886-3-327-3456 ISSUED DATE : Dec. 29, 2015 FAX : 886-3-327-0973 Report No.:5N2614 SPORTON International Inc. PAGE NUMBER : 6 of 18 TEL : 886-3-327-3456 ISSUED DATE : Dec. 29, 2015 FAX : 886-3-327-0973 Report No.:5N2614 SPORTON International Inc. PAGE NUMBER : 7 of 18 TEL : 886-3-327-3456 ISSUED DATE : Dec. 29, 2015 FAX : 886-3-327-0973 Report No.:5N2614 SPORTON International Inc. PAGE NUMBER : 8 of 18 TEL : 886-3-327-3456 ISSUED DATE : Dec. 29, 2015 FAX : 886-3-327-0973 Report No.:5N2614 SPORTON International Inc. PAGE NUMBER : 9 of 18 TEL : 886-3-327-3456 ISSUED DATE : Dec. 29, 2015 FAX : 886-3-327-0973 Report No.:5N2614 SPORTON International Inc. PAGE NUMBER : 10 of 18 TEL : 886-3-327-3456 ISSUED DATE : Dec. 29, 2015 FAX : 886-3-327-0973 Report No.:5N2614 SPORTON International Inc. PAGE NUMBER : 11 of 18 TEL : 886-3-327-3456 ISSUED DATE : Dec. 29, 2015 FAX : 886-3-327-0973 Report No.:5N2614 SPORTON International Inc. PAGE NUMBER : 12 of 18 TEL : 886-3-327-3456 ISSUED DATE : Dec. 29, 2015 FAX : 886-3-327-0973 Report No.:5N2614 SPORTON International Inc. PAGE NUMBER : 13 of 18 TEL : 886-3-327-3456 ISSUED DATE : Dec. 29, 2015 FAX : 886-3-327-0973 Report No.:5N2614 SPORTON International Inc. PAGE NUMBER : 14 of 18 TEL : 886-3-327-3456 ISSUED DATE : Dec. 29, 2015 FAX : 886-3-327-0973 Report No.:5N2614 SPORTON International Inc. PAGE NUMBER : 15 of 18 TEL : 886-3-327-3456 ISSUED DATE : Dec. 29, 2015 FAX : 886-3-327-0973 Model Name: ML-60-35 Report No.:5N2614 SPORTON International Inc. PAGE NUMBER : 16 of 18 TEL : 886-3-327-3456 ISSUED DATE : Dec. 29, 2015 FAX : 886-3-327-0973 Report No.:5N2614 SPORTON International Inc. PAGE NUMBER : 17 of 18 TEL : 886-3-327-3456 ISSUED DATE : Dec. 29, 2015 FAX : 886-3-327-0973 Ant. 2 Report No.:5N2614 SPORTON International Inc. PAGE NUMBER : 18 of 18 TEL : 886-3-327-3456 ISSUED DATE : Dec. 29, 2015 FAX : 886-3-327-0973

Report No.: FA5N1614 Report Format Version: 01 Page No. : i of ii FCC ID : HED-ML6035 Issued Date : Dec. 29, 2015 Table of Contents 1. GENERAL DESCRIPTION.................................................................................................................................... 1 1.1. EUT General Information .....................................................................................................................................................................1 1.2. Table for Multiple List...........................................................................................................................................................................1 1.3. Testing Location..................................................................................................................................................................................1 2. MAXIMUM PERMISSIBLE EXPOSURE.................................................................................................................... 2 2.1. Limit of Maximum Permissible Exposure ..............................................................................................................................................2 2.2. MPE Calculation Method ....................................................................................................................................................................3 2.3. Calculated Result and Limit................................................................................................................................................................3 Report No.: FA5N1614 Report Format Version: 01 Page No. : ii of ii FCC ID : HED-ML6035 Issued Date : Dec. 29, 2015 History of This Test Report REPORT NO. VERSION DESCRIPTION ISSUED DATE FA5N1614 Rev. 01 Initial issue of report Dec. 29, 2015 Report No.: FA5N1614 Report Format Version: 01 Page No. : 1 of 3 FCC ID : HED-ML6035 Issued Date : Dec. 29, 2015 1. GENERAL DESCRIPTION 1.1. EUT General Information RF General Information Evaluation Mode Frequency Range Operating Frequency Modulation Type 5GHz WLAN 5150-5250 MHz 5725-5850 MHz 5180-5240 MHz 5745-5825 MHz 802.11a/n: OFDM (BPSK, QPSK, 16QAM, 64QAM) 802.11ac: OFDM (BPSK, QPSK, 16QAM, 64QAM, 256QAM) 60GHz 57-64 GHz 58.32 GHz 60.48 GHz 62.64 GHz QAMQPSKBPSK162/,2/,2/ 1.2. Table for Multiple List The model names in the following table are all refer to the identical product. The difference is the type of the antenna equipped. Model Name 5GHz 60GHz Remark ML-60-35 Internal / Dish Ant. Internal / Dish Ant. ML-60-35-1 External / Sector Ant. Internal / Dish Ant. Outdoor use Note: Both models were tested and recorded in the report for 5GHz. But for 60GHz, only the model: ML-60-35 was tested and recorded in the report. 1.3. Testing Location Testing Location HWA YA ADD : No. 52, Hwa Ya 1st Rd., Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. TEL : 886-3-327-3456 FAX : 886-3-327-0973 JHUBEI ADD : No.8, Lane 724, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C. TEL : 886-3-656-9065 FAX : 886-3-656-9085 Report No.: FA5N1614 Report Format Version: 01 Page No. : 2 of 3 FCC ID : HED-ML6035 Issued Date : Dec. 29, 2015 2. MAXIMUM PERMISSIBLE EXPOSURE 2.1. Limit of Maximum Permissible Exposure (A) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz ; *Plane-wave equivalent power density Report No.: FA5N1614 Report Format Version: 01 Page No. : 3 of 3 FCC ID : HED-ML6035 Issued Date : Dec. 29, 2015 2.2. MPE Calculation Method The MPE was calculated at 250 cm to show compliance with the power density limit. The following formula was used to calculate the Power Density: E (V/m) ＝ d GP30 Power Density: Pd (W/m²) ＝ 377 2 E E ＝ Electric field (V/m) P ＝ Peak RF output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance between radiator and human body (m) The formula can be changed to Pd ＝ 2 377 30 d GP   2.3. Calculated Result and Limit Exposure Environment: General Population / Uncontrolled Exposure For 5GHz Band: Antenna Type : Sector Ant. (PATCH ARRAY) Conducted Power for IEEE 802.11ac MCS0/Nss1 (VHT40): 17.16dBm The maximum combined Average Output Power Distance (cm) Test Freq. (MHz) Antenna Gain (dBi) Antenna Gain (numeric) (dBm) (mW) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 250 5795 18.00 63.0957 17.1584 51.9808 0.004178 1 Complies For 60GHz Band: Antenna Type : Dish Ant. E.I.R.P: 57.52dBm Distance (cm) Test Freq. (GHz) E.I.R.P. Average Output Power (dBm) E.I.R.P. Average Output Power (mW) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 250 60.48 57.52 564834.30 0.720 1 Complies

FCC Radio Test Report Report No. : FR5N2614AA SPORTON INTERNATIONAL INC. Page No. : 2 of 47 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Issued Date : Dec. 29, 2015 FCC ID: HED-ML6035 Table of Contents 1 GENERAL DESCRIPTION ....................................................................................................................5 1.1 Information..............................................................................................................................................5 1.2 Accessories ............................................................................................................................................8 1.3 Support Equipment.................................................................................................................................8 1.4 EUT Operation during Test ....................................................................................................................8 1.5 Test Setup Diagram ...............................................................................................................................9 1.6 Testing Applied Standards ...................................................................................................................12 1.7 Testing Location ...................................................................................................................................12 2 TEST CONFIGURATION OF EQUIPMENT UNDER TEST ................................................................13 2.1 Test Channel Frequencies ...................................................................................................................13 2.2 Conformance Tests and Related Test Frequencies ............................................................................13 2.3 Far Field Boundary Calculations ..........................................................................................................14 3 TRANSMITTER TEST RESULT ..........................................................................................................15 3.1 AC Power Conducted Emissions .........................................................................................................15 3.2 Occupied Bandwidth ............................................................................................................................19 3.3 EIRP Power ..........................................................................................................................................24 3.4 Peak Conducted Power........................................................................................................................27 3.5 Transmitter Spurious Emissions...........................................................................................................29 3.6 Frequency Stability ...............................................................................................................................41 3.7 Operation Restriction and Group Installation .......................................................................................44 3.8 Test Equipment and Calibration Data ..................................................................................................45 4 MEASUREMENT UNCERTAINTY ......................................................................................................47 APPENDIX A. TEST PHOTOS.............................................................................................A1 ~ A6 FCC Radio Test Report Report No. : FR5N2614AA SPORTON INTERNATIONAL INC. Page No. : 3 of 47 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Issued Date : Dec. 29, 2015 FCC ID: HED-ML6035 Summary of Test Result Standard Requirements and Conformance Test Specifications Report Clause Ref. Std. Clause Description Result Remark 3.1 FCC 15.207 AC Power Conducted Emissions Complied - 3.2 FCC 15.255(e) Occupied Bandwidth Complied - 3.3 FCC 15.255(b)(1) EIRP Power Complied - 3.4 FCC 15.255(e) Peak Conducted Power Complied - 3.5 FCC 15.255(c) Transmitter Spurious Emissions Complied - 3.6 FCC 15.255(f) Frequency Stability Complied - 3.7 FCC 15.255(a),(h) Operation Restriction and Group Installation Complied - FCC Radio Test Report Report No. : FR5N2614AA SPORTON INTERNATIONAL INC. Page No. : 4 of 47 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Issued Date : Dec. 29, 2015 FCC ID: HED-ML6035 Revision History REPORT NO. VERSION DESCRIPTION ISSUED DATE FR5N2614AA Rev. 01 Initial issue of report Dec. 29, 2015 FCC Radio Test Report Report No. : FR5N2614AA SPORTON INTERNATIONAL INC. Page No. : 5 of 47 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Issued Date : Dec. 29, 2015 FCC ID: HED-ML6035 1 General Description 1.1 Information 1.1.1 The Channel Plan(s) RF General Information Frequency Range 57-64 GHz The Channel Plan(s) Channel 1: 58.32 GHz Channel 2: 60.48 GHz Channel 3: 62.64 GHz 1.1.2 Table of Modulation FCC Radio Test Report Report No. : FR5N2614AA SPORTON INTERNATIONAL INC. Page No. : 6 of 47 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Issued Date : Dec. 29, 2015 FCC ID: HED-ML6035 1.1.3 Antenna Information Ant. Brand P/N Antenna Type Connector Antenna Gain (dBi) Cable Loss (dB) True Gain (dBi) Remark 1 IgniteNet FS5-19N-120 Sector Ant. (PATCH ARRAY) Type-N 19 1 18 External (5GHz use) Gain (dBi) Ant. Brand P/N Antenna Type Connector Band 1 Band 4 Remark 2 Accton 123400001084A Dish Ant. N/A 12.33 15.35 Internal (5G&60G use) 1.1.4 EUT Operational Condition EUT Power Type From PoE 1.1.5 Table for Multiple Listing The model names in the following table are all refer to the identical product. The difference is the type of the antenna equipped. Model Name 5GHz 60GHz Remark ML-60-35 Internal / Dish Ant. Internal / Dish Ant. ML-60-35-1 External / Sector Ant. Internal / Dish Ant. Outdoor use Note: Both models were tested and recorded in the report for 5GHz. Bu…

Text truncated - open the document above for the full version.