HFLSLV8000SLV8000 Low Power Transmitter

Broadcasting Division 2100.4400.32 -03- 0.1 - Instrument Manual R&S ® SLx8000 ADTV Transmitter Family Band III / IV / V, Low Power Only skilled personnel may perform the operations of the described instrument that are necessary for installing and putting it into operation as well as maintaining, trou- bleshooting and servicing it. Printed in Germany Instrument Manual Transmitter Series SLx8000 Edition: April 2009 Version:E 03.00 2100.4400.32 -03- 0.2 - © 2009 Rohde&Schwarz GmbH & Co. KG 81671 Munich, Germany This document may be duplicated or otherwise used or its contents made known to third parties only with permission of the originator or other authorized persons. Infringements constitute an offence and are subject to claim for damages (UrhG, UWG, BGB). All rights reserved for patenting or utility model registration. The R&S logo, Rohde & Schwarz and R&S are registered trademarks of Rohde & Schwarz GmbH & Co.KG and their subsidiaries. ROHDE & SCHWARZ GmbH & Co.KG D-81671 München - Mühldorfstraße 15 Telefon: (089) 4129-0 ^ Int. +49894129-0 Telefax: (089) 4129-12164 Internet: www.rohde-schwarz.com Printed in Federal Republic of Germany ^ Subject to change ^ Data without tolerances: typical values Sehr geehrter Kunde, Sie haben sich für den Kauf eines Rohde & Schwarz-Produktes ent- schieden. Hiermit erhalten Sie ein nach modernsten Fertigungsmethoden hergestelltes Produkt. Es wurde nach den Regeln unseres Qualitätsmanage- mentsystems entwickelt, gefertigt und geprüft. Das Rohde & Schwarz- Qualitätsmanagementsystem ist u.a. nach ISO 9001 und ISO 14001 zertifiziert. Der Umwelt verpflichtet Energie-effiziente, J RoHS-konforme Produkte Kontinuierliche Weiterentwicklung J nachhaltiger Umweltkonzepte ISO 14001-zertifiziertes J Umweltmanagementsystem Dear Customer, You have decided to buy a Rohde & Schwarz product. You are thus assured of receiving a product that is manufactured using the most modern methods available. This product was developed, manufactured and tested in compliance with our quality management system stan- dards. The Rohde & Schwarz quality management system is certified according to standards such as ISO 9001 and ISO 14001. Environmental commitment Energy-efficient products J Continuous improvement in J environmental sustainability ISO 14001-certified environmental J management system Cher client, Vous avez choisi d’acheter un pro- duit Rohde & Schwarz. Vous disposez donc d’un produit fabriqué d’après les méthodes les plus avancées. Le déve- loppement, la fabrication et les tests respectent nos normes de gestion qualité. Le système de gestion qualité de Rohde & Schwarz a été homologué, entre autres, conformément aux nor- mes ISO 9001 et ISO 14001. Engagement écologique Produits à efficience énergétique J Amélioration continue de la durabilité J environnementale Système de gestion de l’environne- J ment certifié selon ISO 14001 Certified Environmental System ISO 14001 Certified Quality System ISO 9001 Qualitätszertifikat Certificate of quality Certificat de qualité 1171.0200.11 V 0 4 .0 1 1171.0200.22-04.00 Customer Support Technical support – where and when you need it For quick, expert help with any Rohde & Schwarz equipment, contact one of our Customer Support Centers. A team of highly qualified engineers provides telephone support and will work with you to find a solution to your query on any aspect of the operation, programming or applications of Rohde & Schwarz equipment. Up-to-date information and upgrades To keep your instrument up-to-date and to be informed about new application notes related to your instrument, please send an e-mail to the Customer Support Center stating your instrument and your wish. We will take care that you will get the right information. USA & Canada Monday to Friday (except US public holidays) 8:00 AM – 8:00 PM Eastern Standard Time (EST) Tel. from USA 888-test-rsa (888-837-8772) (opt 2) From outside USA +1 410 910 7800 (opt 2) Fax +1 410 910 7801 E-mail [email protected] East Asia Monday to Friday (except Singaporean public holidays) 8:30 AM – 6:00 PM Singapore Time (SGT) Tel. +65 6 513 0488 Fax +65 6 846 1090 E-mail [email protected] Restof the World Monday to Friday (except German public holidays) 08:00 – 17:00 Central European Time (CET) Tel. +49 89 4129 13774 Fax +49 (0) 89 41 29 637 78 E-mail [email protected] 1171.0200.42-02.00 12 12 Address List Headquarters, Plants and Subsidiaries Headquarters ROHDE & SCHWARZ GmbH & Co. KG Mühldorfstraße 15 · D-81671 München P.O.Box 80 14 69 · D-81614 München Plants ROHDE & SCHWARZ Messgerätebau GmbH Riedbachstraße 58 · D-87700 Memmingen P.O.Box 16 52 · D-87686 Memmingen ROHDE & SCHWARZ GmbH & Co. KG Werk Teisnach Kaikenrieder Straße 27 · D-94244 Teisnach P.O.Box 11 49 · D-94240 Teisnach ROHDE & SCHWARZ závod Vimperk, s.r.o. Location Spidrova 49 CZ-38501 Vimperk ROHDE & SCHWARZ GmbH & Co. KG Dienstleistungszentrum Köln Graf-Zeppelin-Straße 18 · D-51147 Köln P.O.Box 98 02 60 · D-51130 Köln Subsidiaries R&S BICK Mobilfunk GmbH Fritz-Hahne-Str. 7 · D-31848 Bad Münder P.O.Box 20 02 · D-31844 Bad Münder ROHDE & SCHWARZ FTK GmbH Wendenschloßstraße 168, Haus 28 D-12557 Berlin ROHDE & SCHWARZ SIT GmbH Am Studio 3 D-12489 Berlin R&S Systems GmbH Graf-Zeppelin-Straße 18 D-51147 Köln GEDIS GmbH Sophienblatt 100 D-24114 Kiel HAMEG Instruments GmbH Industriestraße 6 D-63533 Mainhausen Locations Worldwide Please refer to our homepage: www.rohde-schwarz.com ◆Sales Locations ◆Service Locations ◆National Websites Phone +49 (89) 41 29-0 Fax +49 (89) 41 29-121 64 [email protected] Phone +49 (83 31) 1 08-0 +49 (83 31) 1 08-1124 [email protected] Phone +49 (99 23) 8 50-0 Fax +49 (99 23) 8 50-174 [email protected] Phone +420 (388) 45 21 09 Fax +420 (388) 45 21 13 Phone +49 (22 03) 49-0 Fax +49 (22 03) 49 51-229 [email protected] [email protected] Phone +49 (50 42) 9 98-0 Fax +49 (50 42) 9 98-105 [email protected] P…

Text truncated - open the document above for the full version.

8661A Robert Fulton Drive, Columbia, MD 21046-2265 Phone (410) 910-7800 Fax (410) 910-7801 7 October, 2010 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 In regard to Application Reference EA135880 for FCC ID: HFLSLV8000: Rohde & Schwarz, Inc. hereby requests that an Original Equipment filing be granted for Equipment Certification FCC ID: HFLSLV8000. Thank you very much for your consideration. Respectfully submitted, James W. Silk Program Manager Broadcast Transmission Products 1-760-855-8243 1-253-313-1011 (fax) [email protected] Enclosures xc: file

External Photos SLX8000 Front Panel Rear Panel

SLV8000 series Transmitter FCC Certification Application FCC ID Label and Manufacturer’s ID Label Examples For all SLV8000 MediaFLO/ATSC transmitter models as described within this Certification application. (view enlarged for clarity) View of sample label at approximate actual size FCC ID: HFLSLV8000 ≈2” (51 mm) ≈5/8” (16 mm) FCC ID:HFLNVXXXX

SLX8000 Internal Photos Pulling out the power amplifier ADTV coder board RF Board Capacitor batteries and cables Compact flash card Transistors Component test points Output stage transistors

Broadcasting Data Sheet | 02.01 R&S®SLx8000 Family of UHF/VHF Transmitters Efficient solutions for analog and digital broadcasting standards 2 The R&S®SLx8000 family includes UHF and VHF transmit- ters for digital and analog TV as well as for digital audio broadcasting. The ultracompact devices can be used as transmitters or retransmitters for DVB-T/DVB-H. Intelligent operating functions reduce the transmitters' setting times. A special feature is the automatic set & go function that does away with the time-consuming output stage precor- rection for all digital standards. The compact but flexible all-in-one-box concept allows various options to be inte- grated, which simplifies logistics and handling when trans- mitter sites are difficult to access. The transmitters can handle both analog and digital TV standards (DVB-T/DVB-H, ATSC including ATSC-M/H). Output power ranges up to 100 W for DVB-T/DVB-H, up to 150 W for ATSC and up to 250 W for analog TV. If neces- sary, an analog transmitter can easily be switched over to digital TV without modifying the hardware. For digital audio broadcasting, the transmitter family sup- ports transmission in line with the DAB, DAB+ and T-DMB specifications with output power of up to 300 W. The broadband output stages are based on state-of-the- art, powerful LDMOS and VMOS transistors and feature high efficiency. Since the components used have a high level of integration, the transmitters are favorably priced and can be delivered at short notice, even if they are ordered in large quantities. And the low-power transmit- ters come with the high quality that Rohde & Schwarz stands for. R&S®SLx8000 Family of UHF/VHF Transmitters At a glance The UHF/VHF low-power transmitters of the R&S®SLx8000 family are available for ATV, DTV and DAB/T-DMB. They are reliable, compact and flexible and fill coverage gaps in transmitter networks. These features make them ideal for use at small, remote transmitter sites that offer only limited space, are difficult to access and affected by strong variations in power supply. Key facts UHF/VHF low-power transmitters for analog and digital J TV and digital audio broadcasting Retransmitter in multifrequency networks for J DVB-T/DVB-H Ultracompact equipment of only two to four height units J Broadband precorrection for digital standards with J set & go function Simple conversion from analog to digital TV J (without hardware modifications) Top Rohde & Schwarz quality with excellent J price/ performance ratio Rohde & Schwarz R&S®SLx8000 Family of UHF/VHF Transmitters 3 R&S®SLx8000 Family of UHF/VHF Transmitters Benefits and key features Compact, flexible and easy to use Ultracompact solution J Retransmitter in multifrequency networks for J DVB-T/DVB-H Convenient operation; on-site or remote diagnostics J Precorrection for digital standards with set & go function J page ▷4 Special features for operation Switchover from analog to digital TV J DVB-T/DVB-H receiver for signal monitoring J Highly sensitive GPS receiver with fast synchronization J (option) page ▷5 Always on air Convenient supply with different nominal voltages J Self-monitoring power output stages J Standby systems for high availability J page ▷6 Output power of the R&S®SLx8000 family 1) Height units (HU) Frequency rangeATSC ATSC-M/H (RMS) DVB-T DVB-H (RMS) ATV (sync peak) DAB(+) T-DMB (RMS) 234 UHF3 W2 W b 8 W5 W12 W b 16 W10 W25 W b 40 W25 W50 W b 80 W50 W125 W b 150 W100 W250 W b VHF40 W25 W50 W40 W b 80 W50 W125 W75 W b 150 W100 W250 W150 W b 300 W b 1) Power before bandpass filter. 4 Compact, flexible and easy to use Ultracompact solution The R&S®SLx8000 transmitters have a very compact design. They are 19" wide, occupy two to four height units and contain all basic components such as the transmitter input unit, the modulator unit, the output stage module, and the display plus keypad. The housing fan is attached outside for easy access. In addition, the transmitters can accommodate a variety of options. The transmitters can be set up wherever required and are easy to transport. Retransmitter in multifrequency networks for DVB-T/DVB-H The R&S®SLx8000 can be used as a retransmitter. In this case, the integrated DVB-T/DVB-H receiver (option) delivers a demodulated baseband signal to the internal signal processing unit. This operating mode has two major advantages: An infrastructure for feeding a transport stream is not J required The signal is "refreshed" by applying error correction (as J specified in the DVB-T/DVB-H standard for demodulation) Convenient operation; on-site or remote diagnostics The transmitter has a backlit graphical display and a keypad on the front panel for local operation. Shortcuts provide quick access to frequently used menu items. LEDs signal important operating states at a glance. As an alter- native, the R&S®SLx8000 can be operated both locally or remotely from a PC via a web browser. An optional SNMP agent offers yet another means for remote monitoring. In areas without a fast network in- frastructure, the transmitters can be controlled via this optional module with floating contacts. Transmitter sites with narrowband data links can be remote-monitored by optionally using a dial-up modem or a mobile phone connection. In broadcasting networks containing a large number of d evices, efficient and reliable configuration management is important. This is why the R&S®SLx8000 transmitters can be configured over the Internet from a central control station. Precorrection for digital standards with set & go function The output stages in the transmitters for digital standards are precorrected for all specified frequencies and power levels. After a change in frequency or power, the auto- matic set & go function loads the appropriate precorrection curve in the background. Manual precorrection is there- fore not necessary when a transmitter is put into operation or a when a channel is changed. The available precorrec- tion curves make it possible to reduce the…

Text truncated - open the document above for the full version.

Für diese Unterlage behalten wir uns alle Rechte vor. Ausgedruckte Dokumente unterliegen nicht dem Änderungsdienst. For this document all rights are reserved. Printed documents are not subject to revision _ Pos.-Nr. ItemNo Menge Quantity ME Unit El.Kennz Ref.Des. Benennung / Bezeichnung Designation ZSachnummer Stock No. Ersatzteil Subst.part BAVH Benennung/Designation SX801 EXCITER SX801 EXCITER Sprach./Lang de en Ä.I. / C.I 12.00 Blatt/Sheet 1 of 2 Dokument Nr. / Document No. 2104.4504.01 ST SX801 Datum/ Date 2010-03-10 Abt. / Dept. 7TS2 Name / Name NE ACHTUNG EGB/ATTENTION ESD *VARIANTENERKLAERUNG *EXPLANATION OF MODELS VAR02=GRUNDGERAET MOD02=BASIC DEVICE 70 SZS ERSATZTEILLISTE VORHANDEN0999.9684.00MO SPARE PARTS LIST AVAILABLE Ers.-Teilliste SX801 Id.-Nr. 2104.4540.01 100 SPB BEMERKUNG0999.9610.00BO NOTE Gerät kann erst nach Konfiguration mit Optionen nach K-MAT-Liste 2104.4504K02 montiert werden ! 201 SKB BAUGRUPPENTRAEGER BEDR. SX801Z2104.4756.00M ASSEMBLY SUPPORT PRINTED SX801 VAR 02 602 SE1EV 40X40X25 5.00L/S 12V2100.2236.00XBO BLOWER E2 702 SMZ LUEFTERABDECKUNG SX8012104.4862.00M BLOWER COVERING SX801 804 SVS 7985/ISR-M3X30-A4-PA2100.6777.00BO SCREW 1001 SFV FLACHSTECKER GR.6.30438.0453.00BO CONNECTOR 1101 SVS 965/ISR-M4X8-A4-PA1148.2817.00BT SCREW M4X8 1201 SVS DIN6797-A5.3-A20016.2850.00BO TOOTHED LOCK WASHERS 1301 SVS DIN128-A4-A20005.2501.00BO SPRING LOCK WASHER DIN 128-A4-A2 1401 SVS DIN934-M4-A40016.4400.00BO NUT 3001 SA2ED RF BOARDZ2112.4800.03XM RF BOARD 3105 SVS 965/ISR-M3X5-A4-PA1148.2775.00BO SCREW 3202 SVS 6900/ISR-M2.5X25-A23584.5502.00BO COMBINATION SCREWS nur zur Fixierung von Pos 300 in Pos 20; muessen nach Montage mit Pos 310 wieder entfernt werden 3501 SOS EGB-SCHILD 12X280061.1520.00MO WARNING LABEL FOR ESDS 3601 SOS LABEL CHINA-ROHS 253583.1361.00BO LABEL CHINA-ROHS 25 5001 SZE DISPLAYEINHEIT SX801Z2104.4804.02XM DISPLAY UNIT SX801 5109 SVS 965/ISR-M3X5-A4-PA1148.2775.00BO SCREW 5201 SZN LUFTLEITBLECH SX801Z2104.4856.00M AIRSTREAM SHEET SX801 Für diese Unterlage behalten wir uns alle Rechte vor. Ausgedruckte Dokumente unterliegen nicht dem Änderungsdienst. For this document all rights are reserved. Printed documents are not subject to revision _ Pos.-Nr. ItemNo Menge Quantity ME Unit El.Kennz Ref.Des. Benennung / Bezeichnung Designation ZSachnummer Stock No. Ersatzteil Subst.part BAVH Benennung/Designation SX801 EXCITER SX801 EXCITER Sprach./Lang de en Ä.I. / C.I 12.00 Blatt/Sheet 2 of 2 Dokument Nr. / Document No. 2104.4504.01 ST SX801 Datum/ Date 2010-03-10 Abt. / Dept. 7TS2 Name / Name NE 5302 SVS 965/ISR-M3X5-A4-PA1148.2775.00BO SCREW 6002 SKR BW2-FRONTGRIFF 1E1096.1451.00BO FRONT HANDLE 6101 SKR BW2-GESTELLWINK.1E RE.1096.3402.00MO 6201 SKR BW2-GESTELLWINK.1E LI.1096.3419.00MO ANGLE 1H LEFT 6304 SVS 965/ISR-M4X16-A4-PA1148.2846.00BT 965/ISR-M4X16-A4-PA 6404 SVS DIN6797-V4.3-A21096.4773.00BO TOOTHED LOCK WASHERS 6502 SZM GERAETE.BEF.SATZ M5 TORXZ2099.1271.00M SET OF PARTS M5 TORX 7051 SMP VERSCHLUSSSTOPFEN DRM 10.0 SW0681.7441.00BV PLUG Pos 705 entfällt aus ST wenn Fronthaube 2104.4785.00 ÄI >= 03.00 verbaut ist (=kein 10MHz-Durchbruch) 7101 SW34DY STEUERKABEL W34Z2104.5875.00XM CONTROL CABLE 7201 SW35DY STEUERKABEL W35Z2104.5881.00XM CONTROL CABLE 7301 SW38DY STEUERKABEL W38Z2104.5898.00XM CONTROL CABLE 7401 SW335DY STEUERKABEL W335Z2104.5900.00XM CONTROL CABLE 7501 SW217DV RF KABEL W217 EF316D SMA/W- SMA/E Z2104.5952.00XM RF CABLE entfällt bei Verwendung von Option B41 7601 SMZ MONTAGEPLATTE 5 X SUB-D2104.4885.00M MOUNTING PLATE 5 X SUB-D 7708 SFM VERRIEGEL.BOLZEN M. M30099.7783.00BO LOCK INGBOLT 7803 SDZ FLBDK.HALTER 14/130254.2055.00BO DZ FLAT CABLE HOLDER 9001 SZN GEHAEUSEDECKEL SX801Z2104.4779.00M CASING COVER SX801 91018 SVS 965/ISR-M3X5-A4-PA1148.2775.00BO SCREW 9501 SOS WARRANTY SIEGEL6110.5304.00BO WARRANTY SEAL 9601 SOS CSA - SCHILD2093.9093.00M CSA LABEL 9701 SOS CE-SCHILD 0682 40X102087.2084.00MO CE 0682 LABEL 40X10 10001 SHS SX801-SW2104.6107.02M SX801-SW

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…

Text truncated - open the document above for the full version.

This document was signed electronically. The Center for Quality Engineering of SGS Germany GmbH is accredited by DATech for COMPONENTS TESTING ENVIRONMENTAL ENGINEERING ELECTROMAGNETIC COMPATIBILITY PRODUCT SAFETY TELECOM CONFORMANCE TESTS SGS Germany GmbH, SGS CQE, Hofmannstr. 50, D-81379 München, Phone +49 89-722-48793, Fax +49 89-722-22648, Internet www.cqe-testlab.com The test report shall not be reproduced except in full without the written approval of the testing laboratory DAT-P-002/91-02 Center for Quality Engineering Test Report No.: B0YX0001 Order No.: B0YX Pages: 26 Munich, Dec 18, 2008 Client: Rohde & Schwarz GmbH & Co. KG Equipment Under Test: SLV8100A TV Transmitter ATSC Manufacturer: Rohde & Schwarz GmbH & Co. KG Task: Identification of compliance with the requirements mentioned below: Test Specifications: [covered by accreditation]  FCC 47 CFR Ch.1, Part 15, Subpart B (informative)  FCC 47 CFR Ch.1, Part 2  EN 301 489, Part 1 & 11 Result: Requirements of the before mentioned Specification(s) are fulfilled. The results relate only to the items tested as described in this test report. edited by: Date Signature Huber Qualification Engineer Dec 18, 2008 approved by: Date Signature Bauer Manager EMC Dec 18, 2008 Test Report No.: B0YX0001 Date: Dec 18, 2008 SLV8100A TV Transmitter ATSC page 2 / 26 The test report shall not be reproduced except in full without the written approval of the testing laboratory CONTENTS 1 Summary ..................................................................................................................................4 1.1 Tables of Results ................................................................................................................4 1.1.1 Enclosure Port ..............................................................................................................4 1.1.2 Antenna terminals.........................................................................................................4 1.1.3 Power Port ....................................................................................................................5 2 References ...............................................................................................................................6 2.1 Specifications ......................................................................................................................6 2.2 Glossary of Terms...............................................................................................................6 3 General Information ................................................................................................................7 Test Report No.: B0YX0001 Date: Dec 18, 2008 SLV8100A TV Transmitter ATSC page 3 / 26 The test report shall not be reproduced except in full without the written approval of the testing laboratory 3.1 Identification of Client..........................................................................................................7 3.2 Test Laboratory ...................................................................................................................7 3.3 Time Schedule ....................................................................................................................7 3.4 Participants .........................................................................................................................7 4 Equipment Under Test ............................................................................................................8 4.1 Transmitter - technical data type based ..............................................................................8 4.2 Configuration of EUT...........................................................................................................9 4.3 Operating Conditions ........................................................................................................11 4.4 Failure Criteria...................................................................................................................11 5 Test Equipment......................................................................................................................12 5.1 Test Facility .......................................................................................................................12 5.2 Environmental conditions ..................................................................................................12 5.3 Measuring Equipment .......................................................................................................13 5.4 Measurement Uncertainty .................................................................................................13 6 Test Specifications and Results ..........................................................................................14 6.1 Radiated Emission Tests ..................................................................................................14 6.1.1 Radiated Emission Tests FCC Part 15 class A (informative measurement) ..............14 6.1.2 Radiated Emission FCC Part 2, Range 30 – 1000 MHz.............................................15 6.1.3 Radiated Emission FCC Part 2, Range 1 GHz – 10 GHz...........................................17 6.2 Conducted Emission .........................................................................................................19 6.2.1 Spurious Emission to FCC Part 2 on the antenna terminals ......................................19 6.2.2 Occupied bandwidth ...................................................................................................21 6.2.3 Average Output Power ...............................................................................................23 6.3 Conducted Emission to FCC Part 15 on the AC Power port .............................................24 Test Report No.: B0YX0001 Date: Dec 18, 2008 SLV8100A TV Transmitter ATSC page 4 / 26 The test report sh…

Text truncated - open the document above for the full version.

CH 39 Model # SLX800A Part # 2100.100K31 Serial # 100144 Page 1 of 28 FCC Proof of Performance and FCC Acceptance Test Prepared by: Rohde & Schwarz, Inc. Prepared for: FCC Channel 39 Rohde & Schwarz America Columbia, MD Dated: January 4, 2011 CH 39 Model # SLX800A Part # 2100.100K31 Serial # 100144 Page 2 of 28 Table of Contents Section Page Cover Sheet 1 General Information 2 Test Equipment Used 3 Installed Software 3 Equipment Test Setup 4 FCC Proof of Performance Test Data 5-14 Site Acceptance Test Data 15-21 References 22- 28 General Information Transmitter Manufacture Rohde & Schwarz Model Number SLX8000A Part Number 2100.100K31 Serial Number 100144 Modulation ATSC Total Output Power of Transmitter (TPO) 150 W Total Output Power of Filter (TPOF) 110 W Pilot Frequency 62…

Text truncated - open the document above for the full version.