HH8-DY6P20-TXCar Security Transmitter

MANUAL FOR INSTALLATION AND OPERATING INSTRUCTION THORN 99 REMOTE CONTROLLED CAR STARTER ALARM SYSTEM OWNER’S GUIDE This device complies with part 15 of F.C.C rules. Operation of this device is subject to the following two conditions. 1. This device may not cause harmful interference. 2. This device must accept any interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. FEATURES
MICRO SIZED CPU
TWO COMPACT REMOTE TRANSMITTERS
REMOTE RANGE UPTO 600M
127dB HIGHT POWER WEATHER PROOF SIREN(1 TONE/6 TONES)
REMOTE ARMING AND DISARMING
REMOTE PANIC OPERATION
PASSIVE OR ACTIVE ARMING SELECTABLE BY TRANSMITTER
PASSIVE ARMING AND DOOR LOCK : AUTOMATICALLY 20 SECONDS AFTER LAST DOOR IS CLOSED
AUTO REARMING
REMOTE POWER DOOR LOCK/UNLOCK OPERATION
REMOTE TRUNK RELEASE OPERATION
ALARM MEMORY
FLASHING PARKING LIGHT CONFIRMATION
L.E.D. STATUS INDICATOR
VALET OVERRIDE SWITCH
START INTERRUPT OPERATION
30 SECONDS SIREN DURATION WITH AUTO RESET
INSTANT TRIGGER OF ALL CONNECTED ENTRY POINTS
PLUG IN UNDERDASH SHOCK SENSOR
AUTOMATIC REMOTE ENGINE START OPERATION (AUTO CAR)
AUTOMATIC REMOTE ENGINE START OPERATION WITH RESERVATION(MAMUAL CAR)
AUTOMATIC ENGINE WARMING OPERATION
ENGINE START CONFIRMATION AT LONG DISTANCE
AUTOMATIC AIRCON/HEATER OPERATION
REMOTE ENGINE START TIME EXTENSION
REMOTE START MOTOR OPERATION PERIOD ADJUSTMENT
OPTIONAL TIMER FOR ENGINE START RESERVATION SELF CODE LEARNING SYSTEM THIS SYSTEM HAS ON UNIQUE AND COMPUTERIZED SECURITY CODE SYSTEM. THIS FEATURE CON MEMORIZE THE CODE NUMBER FOR YOUR SYSTEM SIMPLY AND IT’S VERY EASY TO CHANGE WITH ANOTHER REMOTE CONTROL UNIT. SELF CODE LEARNING WHEN YOU HOOK UP THE MAIN UNIT TO MAIN POWER, IT WILL CHIRP TWICE. AND PRESS THE TRANSMITTER BUTTON #1 FOR A SECOND THEN IT WILL CHIRP TWICE WITH FLASHING PARKING LIGHT AND YOUR TRANSMITTER CODE NUMBER IS REGISTERED TO YOUR MAIN UNIT. VALET MODE CODE LEARNING 1) YOUR HOOK UP THE MAIN UNIT TO MAIN POWER 2) TURN ON THE IGNITION “ON” POSITION 3) PRESS THE TRANSMITTER BUTTON #1 FOR 5 SECONDS THEN IT AND SAME TIME PUSH DOOR PIN SWITCH 3 TIMES THEN IT WILL CHIRP TWICE AND YOUR TRANSMITTER CODE NUMBER IS REGISTERED TO YOUR MAIN UNIT. ARMING AND DISARMING OF SYSTEM (REMOTE BUTTON #1) 1. AUTO ARMING (PASSIVE ARMING) THE LAST DOOR IS CLOSED THEN SYSTEM WILL CHIRP ONCE AFTER 3 SECONDS AS PRELIMINARY SIGNAL. THEN AFTER 20 SECONDS, THE SYSTEM WILL BE ARMED AND DOOR WILL BE LOCKED AUTOMATICALLY WITH ONE CHIRP SOUND AND FLASHING PARKING LIGHT. 2. DIRECT ARMING (ACTIVE ARMING) THE LAST DOOR IS CLOSED THEN PRESS THE BUTTON #1 ON THE TRANSMITTER THEN THE SYSTEM WILL BE ARMED AND DOOR WILL BE LOCKED IMMEDIATELY WITH ONE CHRIP SOUND. 3. CONFIRMATION OF ALARM ON/OFF ON : ONE CHIRP SOUND/FLASHING PARKING LIGHT ONCE OFF : TWO CHIRP SOUND/FLASHING PARKING LIGHTS TWICE 4. ALARM INDICATOR ON : RED/GREEN L.E.D. LAMP FLASHING SOLWLY OFF : RED/GREEN L.E.D. LARM FLASHING RAPIDLY (PASSIVE) RED/GREEN L.E.D. LAMP OFF (ACTIVE) 5. INTRUSION MEMORY FEATURE WHEN PRESS THE BUTTON #1 ON TRANSMITTER FOR DISARM THE ALARM SYSTEM, SYSTEM WILL CHIRP 4 TIMES FOR NOTICE OF INTRUSION. 6. REMOTE DOOR LOCK/UNLOCK ARM : DOOR LOCK DISARM : DOOR UNLOCK 7. AUTO REARMING WHEN THE SYSTEM IS ARMED, UNAUTHORIZED ENTRY ATTEMPTS OR IMPACTS TO THE VEHICLE WILL INSTANTLY TRIGGER THE SIREN FOR 30 SECONDS AND PARKING LIGHT WILL FLASH ALSO THEN AFTER SYSTEM WILL BE RESET AUTOMATICALLY. 8. REMOTE PANIC OPERATION WHEN THE CAR IS RUNNING OR PARKING, THE SYSTEM CAN SOUND EMERGENCY SIREN WITH FLASHING PARKING LIGHT BY PRESSING THE TRANSMITTER BUTTON #1 FOR 3 SECONDS TO SHUT PANIC OFF. PRESS THE TRANSMITTER BUTTON #1 AGAIN THEN THE SIREN WILL STOP 9. REMOTE DOOR LOCKING WHEN THE CAR RUNNING BY PRESSING THE TRANSMITTER BUTTON #1 FOR A SECOND DOOR WILL BE LOCKED AND DOOR WILL BE UNLOCKED AUTOMATICALLY WHEN THE IGNITION KEY OFF FOR PARKING 10. VALET OVERRIDE SWITCH TO PREVENT ALARM SYSTEM FROM ARMING DURING EXTENDED STOPOVERS (SERVICE STATION, CAR WASH VALET PARKING ETC.) SIMPLY PUT THE PUSH SWITCH TO THE VALET POSITION. THIS MUST BE DONE ONLY WHILE THE IGNITION OR ENGINE IS ON. WHEN THE VALET MODE THE ALARM SYSTEM WILL NOT ARM. HOWEVER THE KEYLESS ENTRY FEATURE OF THE SYSTEM IS STILL OPERATIONAL. THE REMOTE TRANSMITTER CAN BE USED TO LOCK AND UNLOCK THE POWER DOOR LOCKS. L.E.D. RED LAMP LIGHT ON CONTINUOUSLY AT VALET MODE ON POSITION. 11. VALET OVERRIDE SWITCH REFER ATTACHED BLOCK DIAGRAM OF RELAY CONNECTION. REMOTE START SYSTEM (TRANSMITTER BUTTON #2) 1. START ON/OFF PRESS THE TRANSMITTER BUTTON #2 FOR A SECOND, THEN THE ENGINE WILL BE STARTED WITH ONE CHIRP SOUND AND FLASHING PARKING LIGHT. FOR THE NOTICE OF ENGINE START, SYSTEM WILL CHIRP (PARKING LIGHT) 3 TIMES. IF THE ENGINE FAILS TO START, SYSTEM WILL AUTOMATICALLY TRY UP TO 3 TIMES UNTIL THE ENGINE HAS STARTED. TO CUT OFF THE ENGINE START, PRESS THE TRANSMITTER BUTTON #1 TWICE. 2. AIR-CONDITION/HEATER OPERATION FIRST OFF ALL MAKE THE AIR-CONDITION/HEATER SWITCH “ON” POSITION AND ENGINE IS STARTED; THEY WILL OPERATE AFTER 30 SECONDS. 3. LIMITED ENGINE START BY TRANSMITTER SYSTEM WILL SHUT OFF AUTOMATICALLY AFTER 15 MINUTES. 4. ARMING WHILE ENGINE START BY TRANSMITTER SYSTEM TRIGGERED BY DOOR THEN THE ENGINE WILL SHUT OFF AND THEN SIREN WILL SOUND. 5. START RESERVATION FOR MANUAL TRANSMISSION CAR 1) PRESS THE TRANSMITTER BUTTON #2 ONCE AT IGNITION “ON” POSITION THEN SYSTEM WILL CHIRP ONCE TO COME START RESERVATION MODE. (IF YOU DON’T WANT THE START RESERVATION MODE, PRESS THE BUTTON #2 AGAIN THEN SYSTEM WILL CHIRP TWICE TO RELEASE START RESERVATION MODE.) 2) THE VEHICLE KEEPS THE IGNITION “ON” POSITION EVEN TAKE OUT THE KEY FROM KEY BOX. THEN AFTER OPEN AND CLOSE THE VEHICLE DOOR AND MAKE THE SYSTEM TO ARMING POSITION.
PASSIVE MODE : AUTOMATICALLY AFTWER 20 SECONDS.
AC…

Text truncated - open the document above for the full version.

EXTERNAL TOP SIDE EXTERNAL BOTTOM SIDE FCC ID : HH8-DY6P20-TX

PROPOSED FCC ID. LABEL AND MARKING BOTTOM SIDE

INTERNAL TOP SIDE INTERNAL BOTTOM SIDE FCC ID : HH8-DY6P20-TX FCC ID : HH8-DY6P20-TX

KTL Korea Testing Laboratory Page 1 of 15 TEST REPORT This test report only responds to the tested sample and shall not be reproduced except in full without written approval of the the Korea Testing Laboratory. Tested and reported by Reviewed by Soun-Kweon Seol , Senior Engineer Seok-Jin Kim , EMC Team Leader KOREA TESTING LABORATORY FG101-01-02-00 222-13, Guro-Dong Guro-Gu Seoul Korea 152-053 http://www.ktl.re.kr Ref. Report No. 99-341-062-1 Name and address of the applicant Dong Yang Security Electronics Co., Ltd. Block 45, Lot 6, Namdong Industrial Complex 435-6, Nonhyung-Dong ,Namdong-Ku, Inchon, Korea 435-300 Standard / Test regulation FCC Part 15, Subpart C Test result Pass Incoming date : December 28, 1999 Test item(s) ; Security/Remote Control Transmitter (Car Alarm) Model/type ref. ; THORN99 Manufacturer ; Dong Yang Security Electronics Co., Ltd. Additional information ; -Required Authorization :Certification -FCC ID. : HH8-DY6P20-TX Test date : January 11~17, 2000 Issue date : January 20, 2000 Ref. Report No. 99 - 341 – 062-1 Page 2 of 15 TABLE OF CONTENTS . GENERAL INFORMATION ................................................................................................................... 3 1. Grantee Name and Mailing Address 2. Manufacturer's Name and Mailing Address 3. Equipment Descriptions 4. Rules and Regulations 5. Measuring Procedure 6. Place of Measurement 7. Date of Measurement . GENERAL REQUIREMENTS OF THE EUT ...................................................................................... 5 1. Labelling Requirement (Section 15.19) 2. Information to User (Sections 15.21) 3. Special Accessories (Section 15.27) 4. Compliant Conditions (Section 15.231) 5. Modification of the Equipment Under Test . INPUT POWER MEASUREMENT (Section 15.31)............................................................................. 6 . RADIATED EMISSION MEASUREMENT (Section 15.231)............................................................ 7-13 1. Test Procedure 2. Photograph for the worst case configuration 3. Sample Calculation 4. Measurement Data 5. Reference Data . OCCUPIED BANDWIDTH MEASUREMENT (Section.15.231)...................................................... 14 . TEST EQUIPMENTS USED FOR FCC COMPLIANCE TESTING................................................ 15 Ref. Report No. 99 - 341 – 062-1 Page 3 of 15 . GENERAL INFORMATION 1. Grantee Name and : Dong Yang Security Electronics Co., Ltd. Mailing Address Block 45, Lot 6, Namdong Industrial Complex 435-6, Nonhyung-Dong , Namdong-Ku, Inchon, Korea 435-300 2. Manufacturer's Name and : Dong Yang Security Electronics Co., Ltd. Mailing Address Block 45, Lot 6, Namdong Industrial Complex 435-6, Nonhyung-Dong , Namdong-Ku, Inchon, Korea 435-300 3. Equipment Descriptions 3.1 Operating Frequency : 304.0 MHz 3.2 Type of Emission : Pulse Code Signal 3.3 Power Supply : DC 12.0V (Battery) 3.4 Additional Information; - Oscillator used : 304 MHz L-C oscillator (C3121) - I.C. used : HT6P20B 4. Rules and Regulations : FCC Part 15, Subpart C 5. Measuring Procedure : ANSI C63.4-1992 6. Place of Measurement : Absorber-lined room(3-Meter) of KAITECH 7. Date of Measurement 6.1 Conducted Emission : Not Applicable 6.2 Radiated Emission : January 15, 2000 Ref. Report No. 99 - 341 – 062-1 Page 4 of 15 . GENERAL REQUIREMENTS OF THE EUT 1. Labelling Requirement (Section 15.19) 1.1 Location on Enclosure : Manual for Installation and Operating Instruction 1.2 How Applied : Printing 2. Information to User (Section 15.21) The following or similar statements were provided in the manual for user instruction. Please refer page 11 of the attached manual for details. 3. Special Accessories (Section 15.27) 3.1 Were the special Accessories provided? [ ] yes, [ x ] no 3.2 If yes, details for the special accessories are as follows : 3.3 If yes, were the appropriate instructions provided on the first page of the text concerned with the device? [ ] yes, [ ] no 3.4 Are these accessories provided of the type which can be readily obtained from multiple retail outlets? [ ] yes, [ ] no And therefore does the manual specify what additional components or accessories are required to used in order to comply with the Rules? [ ] yes, [ ] no This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION : Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Ref. Report No. 99 - 341 – 062-1 Page 5 of 15 4. Compliant Conditions (Section 15.231) 4.1 Was the EUT used for continuous transmissions, such as voice or video, and data transmission ? [ ] yes, [ x ] no 4.2 Was the EUT manually operated ? [ x ] yes, [ ] no If yes, did the EUT employ a switch that would automatically deactivate the transmitter within not more than 5 seconds of being released ? [ x ] yes, [ ] no 4.3 Was the EUT automatically activated ? [ ] yes, [ x ] no If yes, did the EUT cease transmission within 5 seconds after deactivation ? [ ] yes, [ ] no 4.4 Was the EUT used for periodic transmissions at regular predetermined intervals ? [ ] yes, [ x ] no 5. Modification of the Equipment Under Test [ x ] Any modifications were not made to the EUT during the testing since the test results were found of be complied with the FCC Rules with the EUT in the as received condition. [ ] Modification(s) was(were) made to the EUT in order to make it meet FCC Rules since it had shown non- compliance for some test items in the course of our testing. - Status of non-compliance : - Details of Modifications : Ref. Report No. 99 - 341 – 062-1 Page 6 of 15 . INPUT POWER MEASUREMENT (Section 15.31) INPUT POWER 21.0 mW Note : 1. Input Power : P ove = (P p x D) pulse + P D …

Text truncated - open the document above for the full version.

Ref. Report No. 99 - 341 – 062-1 Page 13 of 15 Reference Data : Pulse Train Time One Complete Pulse Train Time Blanking IntervalTt = .87.4msec Pulse Train Time = 68.4msec Ref. Report No. 99 - 341 – 062-1 Page 14 of 15 Modulated Carrier Level -20dB Line .OCCUPIED BANDWIDTH MEASUREMENT(Section15.231)1. Carrier Frequency = 303.78MHz 2. The bandwidth of emission shall be no wide than0.25% of center frequency. 3 Li i l h 0 759MH (303 78 0 0025) 0.76MHz Ref. Report No. 99 - 341 – 062-1 Page 15 of 15 . TEST EQUIPMENT USED FOR FCC COMPLIANCE TESTING Equipment Model No. Manufacturer Serial No. Effective Cal. Duration [x] EMI Receiver ESVS30 R & S 830516/002 06/29/99-06/29/00 (20MHz-1GHz) [x] Spectrum Analyzer 8563A H. P. 3222A02069 02/10/99-02/10/00 (9kHz-26.5GHz) [x] Spectrum Analyzer 8566B H. P. 3014A07057 05/29/99-05/29/00 (100Hz-22GHz) [x] Quasi-Peak Adapter 85650A H. P. 3107A01511 05/29/99-05/29/00 (10kHz-1GHz) [x] RF-Preselector 85685A H. P. 3010A01181 05/29/99-05/29/00 (20Hz-2GHz) [ ] Test Receiver ESH3 R & S 860905/001 06/29/99-06/29/00 (9kHz-30MHz) [x] Pre-Amplifier 8347A H. P. 2834A00543 05/29/99-05/29/00 (0.1-3000MHz, 30dB) [x] Pre-Amplifier 8449B H. P. 3008A00302 06/29/99-06/29/00 (1-26.5GHz, 35dB) [ ] LISN(50 , 50 H) 3825/2 EMCO 9010-1710 - (10kHz-100MHz) [ ] LISN(50 , 50 H) 3825/2 EMCO 9011-1720 - (10kHz-100MHz) [x] Plotter 7470A H. P. 3104A21292 - [x] Tuned Dipole Ant. VHA 9103 Schwarzbeck - * (30MHz-300MHz) [x] Tuned Dipole Ant. UHA 9105 Schwarzbeck - * (300MHz-1GHz) [x] Biconical Ant. BBA9106 Schwarzbeck - * (20MHz-200MHz) [x] Log Periodic Ant. 3146 EMCO - * (200MHz-1GHz) [x] Horn Ant. 3115 EMCO - * (1GHz-18GHz) [x] Oscilloscope TDS540 Tektronix B023930 11/11/99-11/11/00 [x] Volt Meter 3438A H.P. 1717A-00613 05/29/99-05/29/00 [ ] DC Power Supply 6206B H.P. 1145A04822 - [x] Shielded Room (5.0m x 4.5m) SIN-MYUNG - - * Each set of antennas has been calibrated to ensure correlation with ANSI C63.5 standard. The calibration of antennas is traceable to Korea Standard Research Institute(KSRI).

TEST SETUP PHOTOS RADIATED EMISSION