HSW-Z2405Spread Spectrum Transmitter

ZMN2405/ZMN2405HP/ ZMN2430/ZMN2430HP ZMN2430A/ZMN2430HPA Module Series ZigBee ® Module Developer’s Kit User’s Manual 3079 Premiere Pkwy Ste 140 Duluth, Georgia 30097 www.RFM.com +1 (678) 684-2000 Important Regulatory Information RFM Zigbee Series Regulatory Identification ZigBee Module FCC ID IC ID Type of Grant ZMN2405 HSW-ZMN2400 4492A-ZMN2400 Mobile ZMN2405HP HSW-Z2400HP 4492A-Z2400 Mobile ZMN2430 HSW-Z2430 4492A-Z2430 Mobile ZMN2430HP HSW-Z2430HP 4492A-Z2430HP Mobile ZMN2430A HSW-Z2430A 4492A-Z2430A Portable ZMN2430HPA HSW-Z2430HPA 4492A-Z2430HPA Portable THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS. (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. FCC User Information NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.” Warning: Changes or modifications to this device not expressly approved by RFM Inc. could void the user’s authority to operate the equipment. These devices can not be co-located with another transmitter without re-evaluation and separate FCC authorization. RF Exposure For ZigBee products with “Mobile Grants”. In accordance with FCC requirements of human exposure to radiofrequency fields, the radiating element shall be installed such that a minimum separation distance of 20 cm shall be maintained from the user and/or general population. Only antennas approved by the FCC for these modules may be used. Contact RFM for details. For ZigBee products with “Portable Grants”. In accordance with FCC requirements of human exposure to radiofrequency fields, the radiating element of there devices can be installed such that a separation distance of 2.5 cm or less can be maintained from the user and/or general population. (See Appendix 1 at the end of this document) These products have an intergraded antenna on the module which must not be removed. Industry Canada This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareillage numérique de la classe B répond à toutes les exigences de l'interférence canadienne causant des règlements d'équipement. L'opération est sujette aux deux conditions suivantes: (1) ce dispositif peut ne pas causer l'interférence nocive, et (2) ce dispositif doit accepter n'importe quelle interférence reçue, y compris l'interférence qui peut causer l'opération peu désirée. Suggested End Product Labeling The final end product must be labeled in a visible area on the exterior of the enclosure with the following or similar text: “Contains TX FCC ID: (use correct ID from table above)” European Union All ZigBee modules conform to the requirements of ETSI EN 300 328 standard for radiated emissions. Table of Contents Regulatory Information ................................................................................................ 1. Introduction..............................................................................................................................1 2. ZigBee Networking...................................................................................................................2 2.1 Forming a Network...................................................................................................................3 2.2 Sleeping End Devices..............................................................................................................4 2.3 ZigBee Addressing...................................................................................................................4 2.4 Discovery..................................................................................................................................5 2.5 Network Topology and Size.....................................................................................................5 2.6 Static Network Addresses and Link Announcements.............................................................7 3. Getting Started.........................................................................................................................9 3.1 Installing ZBDemo....................................................................................................................9 3.2 Installing USB Drivers..............................................................................................................9 3.3 Running ZBDemo....................................................................................................................9 3.4 Communicating without ZBDemo..........................................................................................19 4. The Development Board.............…

Text truncated - open the document above for the full version.

US Tech FCC ID: HSW-Z2405 Test Report: FCC Spread Spectrum Radio Report Number: 07-0300 Issue Date: 12 February 2008 Customer: Cirronet, Inc. Model: ZMN2405 Page 7 of 80 Agency Agreement Federal Communications Commission P.O. Box 429 Columbia, MD 21045 Date: December 11, 2007 Gentlemen: I hereby appoint US Tech to act as our agent in the preparation of an application for equipment authorization of ZMN2405, FCC ID: HSW-Z2405 under Part 15 of the FCC Rules and Regulations. I certify that the Exhibits properly describe the device or system for which authorization is sought, that the information described in the User's Manual will be provided with each item manufactured or distributed by the applicant, and that the labels described by Exhibit 3 will be affixed to each item manufactured or distributed by the applicant. I further certify that appropriate arrangements have been made to assure that production units of this equipment bearing the name and FCC IDENTIFIER listed in this application will continue to comply with the Commission's requirements. I further certify by signature below that no party (per 47 CFR 1.2002(b)) to the application is subject to a denial of Federal benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Al Patrick, Date: November 30, 2007 Sr. Compliance Engineer Al Patrick Cirronet Inc. [email protected] 3079 Premiere Parkway Duluth, GA 3 0097 678 684 2000 ext. 138

US Tech FCC ID: HSW-Z2405 Test Report: FCC Spread Spectrum Radio Report Number: 07-0300 Issue Date: 12 February 2008 Customer: Cirronet, Inc. Model: ZMN2405 Page 8 of 80 Confidentiality Request Federal Communications Commission Date: 8-20-07 Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: Cirronet respectfully requests confidentiality of certain materials provided with the submission of the ZigBee Module under FCC ID: HSW-Z2405 in accordance with FCC Regulations 0.459. The confidentiality request applies to the (1) schematic diagrams, (2) detailed block diagrams, (3) detailed operational descriptions, and (4) parts lists that may be contained in this filing. The ZigBee Module has been developed at considerable effort and expense by Cirronet. These items are considered as Trade Secrets and therefore public access to the proprietary material could possible result in duplication of equipment that could severely damage the company's business advantage. I appreciate your assistance in this matter. Sincerely, Al Patrick Al Patrick Sr. Compliance Engineer Cirronet Inc. 3079 Premiere Parkway Duluth, GA 3 0097 TEL: 678 684 2000 FAX: 678 684 2001 www.cirronet.com [email protected]

AGENCY AGREEMENT Federal Communications Commission Date: March 24, 2008 P.O. Box 429 Columbia, MD 21045 Gentlemen: By signature below, we hereby appoint Al Patrick to act as Cirronet’s agent with regard to all FCC equipment authorizations. This appointment will remain in effect until otherwise notified. I further certify by signature below that no party (per 47 CFR 1.2002(b)) to the application is subject to a denial of Federal benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). This appointment includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Name: Mark Tucker Signature: Title: V.P of Engineering Date: March 24, 2008

March 28, 2008 Douglas E. Noble Examining Engineer ATCBI RE: FCC ID: HSW-Z2405 Dear Mr. Noble: In response to your comments regarding the above referenced FCC ID: 1. “The user manual is marked confidential. The FCC won’t allow this to be held confidential however you can get short tem confidentiality on the user manual. User manual is not listed in the confidentiality letter. Please advise.” Please disregard the confidentiality request for the manual. Originally, the manual did contain confidential schematics and block diagrams, but this information was actually removed from the manual uploaded to ATCB. 2. “RF Exposure exhibit is needed for all FCC 15.247 applications, please upload this exhibit. Exhibit uploaded. 3. “For Industry Canada Annex B is needed for this application as there is not a SAR report associated with the application. ” Exhibit uploaded. 4. “Confidentiality letter states that Pars List is to be held confidential. Please upload the Parts List exhibit for this application.” The Parts List is on the second page of the Schematic Exhibit. 5. “All Part 15 applications must have a schematic exhibit associated with it. Please upload schematics exhibit.” I thought I uploaded this – Exhibit re-uploaded. 6. “In the test report please re-test Spectral Power Density to FCC Guidelines 2005(see attachment). Please revise test report to include this re-test.” An incomplete version of the test report was inadvertently uploaded. The correct version of the test report has now been uploaded. Best Regards, Sandi McEnery Manager, US Tech – Agent for Cirronet

US Tech FCC ID: HSW-Z2405 Test Report: FCC Spread Spectrum Radio Report Number: 07-0300 Issue Date: 12 February 2008 Customer: Cirronet, Inc. Model: ZMN2405 Page 74 of 80 5. Photographs Figure 40. ZMN2405 with Shield

US Tech FCC ID: HSW-Z2405 Test Report: FCC Spread Spectrum Radio Report Number: 07-0300 Issue Date: 12 February 2008 Customer: Cirronet, Inc. Model: ZMN2405 Page 72 of 80 3 Labeling Information Figure 39. Label Placement

US Tech FCC ID: HSW-Z2405 Test Report: FCC Spread Spectrum Radio Report Number: 07-0300 Issue Date: 12 February 2008 Customer: Cirronet, Inc. Model: ZMN2405 Page 75 of 80 5. Photographs (cont.) Figure 41. ZMN2405 Top and Bottom without shield ZMN2405 Top ZMN2405 Bottom

US Tech Issue Date: February 13, 2008 Report Number: 07-0300 FCC ID: Test Report: Customer: Model HSW-Z2405 FCC Spread Spectrum Radio Cirronet, Inc. ZMN2405 Page 47 of 112 2.19 Maximum Public Exposure to RF Radiation (MPE) CFR 15.247 (i) The maximum exposure level to the public from the RF power of the EUT shall not exceed a power density, S, of 1 mW/cm 2 at a distance, d, of 20 cm from the EUT. Therefore, for : Peak Power (Watts) = 0.00066 (from Table 12, herein) Gain of Transmit Antenna = 14 dB I = 25.1 numeric (from Table 3, herein) Distance, r = 20 cm S = (PG/ 4πr 2 ) = EIRP/4A Where: A = the area of a circle with radius, r = 20cm. Therefore, S = 0.016x1 / 4x3.1416 x (20) 2 = 0.016/1600π = 3.3 μW/cm 2

Page 1 of 112 Application for Cirronet, Incorporated FCC Part 15, Certification For the ZMN2405 FCC ID: HSW-Z2405 UST Project: 07-0300 Issue Date: February 13, 2008 3505 Francis Circle Alpharetta, GA 30004 PH: 770-740-0717 Fax: 770-740-1508 www.ustech-lab.com Page 2 of 112 I certify that I am authorized to sign for the manufacturer and that all of the statements in this report and in the Exhibits attached hereto are true and correct to the best of my knowledge and belief: US Tech (AGENT RESPONSIBLE FOR TEST): By: Name: Alan Ghasiani Title: Operations & Engineering Date: February 13, 2008 Cirronet, Incorporated 3079 Premiere Parkway Duluth, GA 30097 By: Name: Title: Date: This report shall not be reproduced except in full. This report may be copied in part only with the prior written approval of US Tech. The results contained in this report are subject to the adequacy and representative character of the sample provided. 3505 Francis Circle Alpharetta, GA 30004 PH: 770-740-0717 Fax: 770-740-1508 www.ustech-lab.com US Tech Issue Date: February 13, 2008 Report Number: 07-0300 FCC ID: Test Report: Customer: Model HSW-Z2405 FCC Spread Spectrum Radio Cirronet, Inc. ZMN2405 Page 3 of 112 MEASUREMENT/TECHNICAL REPORT COMPANY NAME: Cirronet, Incorporated MODEL: ZMN2405 FCC ID: HSW- Z2405 DATE: February 13, 2008 This report concerns (check one): Original grant X Class II change_____ Equipment type: 2.4 GHz Zigbee Radio Deferred grant requested per 47 CFR 0.457(d)(1)(ii)? yes_____ No X If yes, defer until:_________________ date N.A. agrees to notify the Commission by N.A. date of the intended date of announcement of the product so that the grant can be issued on that date. Report prepared by: US Tech 3505 Francis Circle Alpharetta, GA 30004 Phone Number: (770) 740-0717 Fax Number: (770) 740-1508 US Tech Issue Date: February 13, 2008 Report Number: 07-0300 FCC ID: Test Report: Customer: Model HSW-Z2405 FCC Spread Spectrum Radio Cirronet, Inc. ZMN2405 Page 4 of 112 Table Of Contents Paragraph Title Page Agency Agreement 6 Confidentiality 7 1. General Information 8 1.1 Product Description 8 1.2 Related Submittal(s) 8 2. Tests and Measurements 8 2.1 Configuration of Tested EUT 8 2.2 Test Facility 9 2.3 Test Equipment 9 2.4 Modifications 9 2.5 Number of Operating Frequencies (CFR 15.31(m)) 20 2.6 Peak Limits for signals above 1000 MHz (CFR 15.35) 20 2.7 Antenna Description (CFR 15.203) 20 2.8 Power line Conducted Emissions for Digital Peripherals and Receivers 21 (CFR 15.107) 2.9 Power line Conducted Emissions for Transmitter (CFR 15.207) 22 2.10 Worst Case Transmit Duty Cycle 22 2.11 Radiated Emissions Measurement for Digital Peripherals and Receivers 23 (CFR 109) 2.12 Radiated Emissions for Spurious and Harmonics (CFR 15.209) 24 2.13 Restricted Bands (CFR 15.205) 31 2.14 Minimum Six (6) dB Band width (CFR15.247 (a) (2)) 31 2.15 Peak Power Output (CFR 15.247 (b) (3)) 35 2.16 Directional Antenna with gains greater than 6 dBi (CFR 15.247 (c)) 39 2.17 Band Edge Requirement (CFR 15.247 (d)) 40 2.18 Power Spectral Density (CFR 15.247 (e) 43 2.19 Maximum Public Exposure to RF Radiation (CFR 15.247 (i) 47 3. Labeling Information 48 4. Block Diagram(s)/ Schematic(s) 49 5. Photographs 51 . 6. Theory of Operation 53 7. User's Manual 54 US Tech Issue Date: February 13, 2008 Report Number: 07-0300 FCC ID: Test Report: Customer: Model HSW-Z2405 FCC Spread Spectrum Radio Cirronet, Inc. ZMN2405 Page 5 of 112 List Of Figures Figure Title Page 1 Test Configuration 10 2 Photograph(s) of Spurious Emissions Measurement Setup, Corner 12 Antenna, Front 3 Photograph(s) of Spurious Emissions Measurement Setup, Corner 13 Antenna, Rear 4 Photograph(s) of Spurious Emissions Measurement Setup, Omni 14 Antenna, Front 5 Photograph(s) of Spurious Emissions Measurement Setup, Omni 15 Antenna, Rear 6 Photograph(s) of Spurious Emissions Measurement Setup, Patch 16 Antenna, Front 7 Photograph(s) of Spurious Emissions Measurement Setup, Patch 17 Antenna, Rear 8 Photograph(s) of Conducted Emissions Measurement Setup 18 9 Six (6) dB Bandwidth per CFR 15.247(a)(2), Low 32 10 Six (6) dB Bandwidth per FCC Section 15.247(a)(2), Mid 33 11 Six (6) dB Bandwidth per FCC Section 15.247(a)(2), High 34 12 Peak Power Output 15.247(b)(3) – Fundamental, Low 36 13 Peak Power Output 15.247(b)(3) – Fundamental, Mid 37 14 Peak Power Output 15.247(b)(3) – Fundamental, High 38 15 Band Edge Compliance Radiated Emissions, High Channel 41 16 Band Edge Compliance Radiated Emissions, Low Channel 42 17 PSD Compliance, Peak Emissions, Low Channel 44 18 PSD Compliance, Peak Emissions, Low Channel 45 19 PSD Compliance, Peak Emissions, Low Channel 46 20 Label Placement 50 21 ZMN2405 with Shield 53 22 ZMN2405 Top and Bottom 54 List Of Tables Table Title Page 1 EUT and Peripherals 11 2 Test Instruments 19 3 Antenna(s) Supplied with EUT 20 4 Conducted Emissions Test Data, Class B 21 5 Radiated Emissions Data (Digital Device and Receiver) 23 6 Peak Radiated Emissions for Harmonics and other Spurious, Corner 25 Antenna 7 Average Radiated Emissions for Harmonics and other Spurious, Corner 26 Antenna 8 Peak Radiated Spurious Emissions, Omni Antenna 27 9 Average Radiated Spurious Emissions Omni Antenna 28 10 Peak Radiated Spurious Emissions Patch Antenna 29 11 Average Radiated Spurious Emissions Patch Antenna 30 12 Six (6) dB Bandwidth 31 13 Conducted Peak Power Output 35 14 Peak Power Spectral Density 43 US Tech Issue Date: February 13, 2008 Report Number: 07-0300 FCC ID: Test Report: Customer: Model HSW-Z2405 FCC Spread Spectrum Radio Cirronet, Inc. ZMN2405 Page 6 of 112 Agency Agreement Federal Communications Commission P.O. Box 429 Columbia, MD 21045 Date: December 11, 2007 Gentlemen: I hereby appoint US Tech to act as our agent in the preparation of an application for equipment authorization of ZMN2405, FCC ID: HSW-Z2405HPA under Part 15 of the FCC Rules and Regulations. I certify that the Exhibits properly describe the device or system for which authorization is sought, t…

Text truncated - open the document above for the full version.

US Tech FCC ID: HSW-Z2405 Test Report: FCC Spread Spectrum Radio Report Number: 07-0300 Issue Date: 12 February 2008 Customer: Cirronet, Inc. Model: ZMN2405 Page 13 of 80 Figure 2. Photograph(s) for Spurious Emissions Corner Antenna Front US Tech FCC ID: HSW-Z2405 Test Report: FCC Spread Spectrum Radio Report Number: 07-0300 Issue Date: 12 February 2008 Customer: Cirronet, Inc. Model: ZMN2405 Page 14 of 80 Figure 3. Photograph(s) for Spurious Emissions Corner Antenna Rear US Tech FCC ID: HSW-Z2405 Test Report: FCC Spread Spectrum Radio Report Number: 07-0300 Issue Date: 12 February 2008 Customer: Cirronet, Inc. Model: ZMN2405 Page 15 of 80 Figure 4. Photograph(s) for Spurious Emissions Omni Antenna Front US Tech FCC ID: HSW-Z2405 Test Report: FCC Spread Spectrum Radio Report Number: 07-0300 Issue Date: 12 February 2008 Customer: Cirronet, Inc. Model: ZMN2405 Page 16 of 80 Figure 5. Photograph(s) for Spurious Emissions Omni Antenna Rear US Tech FCC ID: HSW-Z2405 Test Report: FCC Spread Spectrum Radio Report Number: 07-0300 Issue Date: 12 February 2008 Customer: Cirronet, Inc. Model: ZMN2405 Page 17 of 80 Figure 6. Photograph(s) for Spurious Emissions Patch Antenna Front US Tech FCC ID: HSW-Z2405 Test Report: FCC Spread Spectrum Radio Report Number: 07-0300 Issue Date: 12 February 2008 Customer: Cirronet, Inc. Model: ZMN2405 Page 18 of 80 Figure 7. Photograph(s) for Spurious Emissions Patch Antenna Rear US Tech FCC ID: HSW-Z2405 Test Report: FCC Spread Spectrum Radio Report Number: 07-0300 Issue Date: 12 February 2008 Customer: Cirronet, Inc. Model: ZMN2405 Page 19 of 80 Figure 8. Photograph(s) for Conducted Emissions