HV4-PN9315AXPS Stylus

Brasil – Aviso da Anatel Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados. following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. NOTE: Dell Bluetooth/wireless devices must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. Any other installation or use will violate FCC Part 15 regulations. Modifications not expressly approved by Dell could void your authority to operate the equipment. Canada, Industry Canada (IC) Notices Class B digital circuitry of this device complies with Canadian ICES-003. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Radiation Exposure Statement: The device complies with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the device can be kept as far as possible from the user body or set the device to lower output power if such function is available. Canada, avis d’Industry Canada (IC) La circuiterie numérique de Classe B de cet appareil est conforme à la norme canadienne ICES-003. Cet appareil est conforme aux normes d’exemption de licence RSS d’Industry Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d’interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter son fonctionnement. Déclaration d’exposition aux radiations: Le produit est conforme aux limites d’exposition pour les appareils portables RF pour les Etats-Unis et le Canada établies pour un environnement non contrôlé. Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être augmentée si l’appareil peut être conservé aussi loin que possible du corps de l’utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction est disponible. Texto de aviso para México La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada. Інформація щодо дотримання нормативів Пристрої Dell з функцією Bluetooth/бездротового зв’язку слід встановлювати та використовувати строго відповідно до інструкцій виробника, указаних у документації, що входить у комплект постачання виробу. Компанія Dell Inc. не несе відповідальність за будь-які перешкоди для радіо- або телеобладнання, спричинені несанкціонованою зміною конструкції пристроїв, що входять у комплект постачання пристроїв Dell із функцією Bluetooth/ бездротового зв’язку, або використання чи під’єднання кабелів і обладнання, які відрізняються від вказаних компанією Dell Inc. Відповідальність за усунення перешкод, спричинених такою несанкціонованою зміною конструкції, використанням чи під’єднанням, несе користувач. Компанія Dell Inc. і її авторизовані торгові посередники та дистриб’ютори не несуть відповідальність за будь-які збитки або порушення державних нормативів унаслідок недотримання користувачем цих вказівок. Thông tin về quy định Thiết bị không dây/Bluetooth Dell phải được lắp đặt và sử dụng tuân thủ nghiêm ngặt hướng dẫn của nhà sản xuất như đã trình bày trong tài liệu hướng dẫn sử dụng đi kèm với sản phẩm. Dell Inc. không chịu trách nhiệm về bất kỳ việc nhiễu sóng vô tuyến truyền thanh hoặc truyền hình do sự thay đổi trái phép các thiết bị đi kèm với bộ thiết bị không dây/Bluetooth Dell, hoặc thay thế hoặc gắn thiết bị và cáp kết nối khác ngoài thiết bị và cáp kết nối do Dell Inc. quy định. Việc chỉnh nhiễu sóng do sự điều chỉnh, thay thế hoặc lắp đặt trái phép như trên là trách nhiệm của người dùng. Dell Inc. và các đại lý hoặc nhà phân phối được ủy quyền không chịu trách nhiệm về bất kỳ thiệt hại hoặc vi phạm quy định của chính phủ có thể phát sinh do người dùng không tuân theo các hướng dẫn này. United States, FCC Notices FCC Radiation Exposure Statement WARNING: The radiated output power of Dell Bluetooth/wireless devices is far below the FCC radio frequency exposure limits. Nevertheless, Dell Bluetooth/wireless devices should be used in such a manner that the potential for human contact during normal operation is minimized. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Interference Statement The device complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the device can be kept as far as possible from the user’s body or set the device to lower output power if such function is available. NOTE: The FCC regulations provide that changes or modifications not expressly approved by Dell Inc. could void your authority to operate this equipment. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interf…

Text truncated - open the document above for the full version.

Dell XPS Active Pen PN9315A User’s Guide Regulatory Model: PN9315A Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2022 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners. Contents 3 Contents Chapter 1: What’s in the box ........................................................................................................................... 4 Chapter 2: Features .......................................................................................................................................... 5 Chapter 3: Setting up your PN9315A .............................................................................................................. 7 Connecting and charging your device ........................................................................................................... 7 Manual Bluetooth pairing ............................................................................................................................... 8 Chapter 4: Dell Peripheral Manager ................................................................................................................ 9 Chapter 5: Holding your PN9315A ................................................................................................................ 10 Chapter 6: Specifications ............................................................................................................................... 11 Chapter 7: Replacing the pen nib ................................................................................................................. 12 Chapter 8: Tile ................................................................................................................................................. 13 Chapter 9: Troubleshooting ........................................................................................................................... 14 Chapter 10: Statutory information................................................................................................................. 16 Chapter 11: Regulatory statement ................................................................................................................ 17 Chapter 12: Getting help and contacting Dell ............................................................................................. 18 4 What’s in the box 1 What’s in the box The following topic lists the contents of your PN9315A and how to record down the PPID number. 1. Dell Active Pen 2. Nib remover 3. Pen nib (2) 4. Manuals NOTE: For warranty purpose, note down the PPID number on the box or retain the box. Features 5 Feature Functionality 2 Features Table 1. Features and functionality of your PN9315A 1 Tip Move the tip over a touch screen to move the pointer. Enables you to write, draw, and select objects. 2 Bottom barrel button Press and hold this button and move the tip over the area you want to erase. To change the functionality of this button, see Dell Peripherals Manager. 3 Top barrel button ● Press this button to open the context menu or perform a right- click. To change the functionality of this button, see Dell Peripherals Manager. ● Press and hold top and bottom barrel button for 3 seconds to enable Bluetooth pairing mode. This also allows your pen to pair with Tilevia Bluetooth. 4 LED indicator A blinking white light indicates the pairing mode is enabled. A solid white light indicates the pairing is complete. For information on pairing your PN9315A with a Bluetooth device, see Pairing with a Bluetooth device. 5 Top button Before Bluetooth pairing your PN9315A with your computer: ● Press and hold for 3 seconds to enable pairing mode. After Bluetooth pairing your PN9315A with your computer: ● Single Press — Launch PN9315A menu ● Double Press — Take a screenshot ● Long Press (1.5s) — Launch Sticky Notes ● Press and hold or press twice in succession to wake your Bluetooth paired computer from sleep. NOTE: This feature is only available on system that support Modern Standby mode. NOTE: These functions are available only in Windows 10 and Windows 11. NOTE: These functions can be changed by re-programming button functionality in Dell Peripheral Manager (DPM). For instructions on how to install DPM, see Installing Dell Peripheral Manager. With Microsoft Powerpoint in Presentation mode: ● Press and hold to go to the next slide ● Press twice in quick succession to return to the previous slide 6 Features Table 1. Features and functionality of your PN9315A (continued) NOTE: These functions in Microsoft Powerpoint are only available with Dell Peripheral Manager (DPM) installed. For instructions on how to install DPM, see Installing Dell Peripheral Manager. Setting up your PN9315A 7 3 Setting up your PN9315A Connecting and charging your device Connecting your pen to the computer is needed to activate the pen and disable shipping mode. Without performing this step, your pen will not work. 1. To c harge your PN9315A, c onne c t to top of the tablet. 2. When you c onne c t your PN9315A to your tablet a prompt will appear to establish a Bluetooth pairing. 3. Click on Connect to confirm the Bluetooth pairing. NOTE: Continue to leave your PN9315A connected to the table till its battery is fully charged. 8 Setting up your PN9315A Manual Bluetooth pairing About this task NOTE: If you were unable to pair your PN9315A automatically, perform the following procedure. NOTE: You can use your PN9315A only with selected Dell computers and tablets. For the list of supported devices, see www.dell.com. NOTE: If your PN9315A is already list…

Text truncated - open the document above for the full version.

2-510-1, Toyonodai, Kazo-shi Saitama 349-1148 Japan Date :2022-01-26 FCC ID : HV4-PN9315A To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ------------------------------------------------------ Koichi Yokoyama/ Senior Director Quality Engineering Wacom Co., Ltd. Tel: +81 3 90 5538 3762 E-mail: [email protected]

2-510-1, Toyonodai, Kazo-shi Saitama 349-1148 Japan Date : 2022-01-26 FCC ID : HV4-PN9315A To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information 2022/6/6 after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, ------------------------------------------------------- Koichi Yokoyama/ Senior Director Quality Engineering Wacom Co., Ltd. Tel: +81 3 90 5538 3762 E-mail: [email protected]

2-510-1, Toyonodai, Kazo-shi Saitama 349-1148 Japan Date: 2022-01-26 FCC ID: HV4-PN9315A AUTHORIZATION LETTER To Whom It May Concern: Wacom Co., Ltd. hereby authorizes Amanda Wu, Senior Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Amanda Wu, Senior Specialist of BV CPS Taoyuan on Wacom Co., Ltd.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, --------------------------------------------------- Koichi Yokoyama/ Senior Director Quality Engineering Wacom Co., Ltd. Tel: +81 3 90 5538 3762 E-mail: [email protected]

Reference No.:BBMN-WTW-P21120099-1 Page 1/3 CONSTRUCTION PHOTOS OF EUT Reference No.:BBMN-WTW-P21120099-1 Page 2/3 Reference No.:BBMN-WTW-P21120099-1 Page 3/3

Label location Product Description: XPS Stylus Model Name：PN9315A LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. Label Here

Reference No.:BBMN-WTW-P21120099-2 Page 1/5 CONSTRUCTION PHOTOS OF EUT Reference No.:BBMN-WTW-P21120099-2 Page 2/5 Reference No.:BBMN-WTW-P21120099-2 Page 3/5 Reference No.:BBMN-WTW-P21120099-2 Page 4/5 Reference No.:BBMN-WTW-P21120099-2 Page 5/5

FCC SAR Exclusion Report Report Format Version 5.0.0 Page No. : 1 of 9 Report No. : SFBBMN-WTW-P21120099 Issued Date : Mar. 10, 2022 FCC SAR Exclusion Report Report No. : SFBBMN-WTW-P21120099 Applicant : Wacom Co., Ltd. Address : 2-510-1, Toyonodai, Kazo-shi Saitama 349-1148 Japan Product Name : XPS Stylus Brand Name : DELL FCC ID : HV4-PN9315A Model No. : PN9315A Standards : FCC 47 CFR Part 2 (2.1093), IEEE C95.1:1992, IEEE Std 1528:2013 KDB 865664 D01 v01r04, KDB 865664 D02 v01r02, KDB 447498 D01 v06 Sample Received Date : Mar. 10, 2022 Date of Evaluation : Mar. 10, 2022 Lab Address : No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location : No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City, Taiwan CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch – Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Gina Liu / Specialist Approved By : Gordon Lin / Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Exclusion Report Report Format Version 5.0.0 Page No. : 2 of 9 Report No. : SFBBMN-WTW-P21120099 Issued Date : Mar. 10, 2022 Table of Contents Release Control Record ............................................................................................................................................................... 3 1.Summary of Maximum SAR Value ....................................................................................................................................... 4 2.Description of Equipment Under Test ................................................................................................................................. 5 3.SAR Measurement Evaluation .............................................................................................................................................. 6 3.1Maximum Output Power ............................................................................................................................................... 6 Maximum Target Conducted Power ............................................................................................................................. 6 3.2SAR Testing Exclusions ............................................................................................................................................... 6 4.Information on the Testing Laboratories ............................................................................................................................. 8 Annex A. Maximum Target Conducted Power FCC SAR Exclusion Report Report Format Version 5.0.0 Page No. : 3 of 9 Report No. : SFBBMN-WTW-P21120099 Issued Date : Mar. 10, 2022 Release Control Record Issue No. Reason for Change Date Issued SFBBMN-WTW-P21120099 Initial release Mar. 10, 2022 FCC SAR Exclusion Report Report Format Version 5.0.0 Page No. : 4 of 9 Report No. : SFBBMN-WTW-P21120099 Issued Date : Mar. 10, 2022 1. Summary of Maximum SAR Value Equipment Class Mode Highest Reported SAR 1g (W/kg) DSS Bluetooth Not Required DXX NFC Not Required Note: 1. The SAR limit (Head & Body: SAR 1g 1.6 W/kg) for general population / uncontrolled exposure is specified in FCC 47 CFR part 2 (2.1093) and ANSI/IEEE C95.1-1992. FCC SAR Exclusion Report Report Format Version 5.0.0 Page No. : 5 of 9 Report No. : SFBBMN-WTW-P21120099 Issued Date : Mar. 10, 2022 2. Description of Equipment Under Test Product Name XPS Stylus FCC ID HV4-PN9315A Brand Name DELL Model No. PN9315A Status of EUT Engineering Sample Modulation Type BLE: GFSK NFC:ASK Operating Frequency BLE : 2402 – 2480 MHz NFC: 13.56 MHz Maximum Tune-up Conducted Power (Unit: dBm) Please refer to Annex A Antenna Gain 2.1 dBi for BT Note: 1. The above EUT information is declared by manufacturer and for more detailed features description please refers to the manufacturer's specifications or User's Manual. FCC SAR Exclusion Report Report Format Version 5.0.0 Page No. : 6 of 9 Report No. : SFBBMN-WTW-P21120099 Issued Date : Mar. 10, 2022 3.SAR Measurement Evaluation 3.1 Maximum Output Power Maximum Target Conducted Power Refer to Annex A. 3.2 SAR Testing Exclusions According to KDB 447498 D01, the SAR test exclusion condition is based on source-based time-av…

Text truncated - open the document above for the full version.

Annex A. Maximum Target Conducted Power ModeMax .Tune-up 3.0 3.0 3.0 -50.0 -50.0 -50.0 Bluetooth NFC BT/ LE Tune-up Power in dBm The maximum conducted average power (Unit: dBm) including tune-up tolerance is shown as below.

Report No.: RFBBMN-WTW-P21120099-1 Page No. 1 / 39 Report Format Version: 6.1.1 Reference No.: BBMN-WTW-P21120099 FCC Test Report (NFC) Report No.: RFBBMN-WTW-P21120099-1 FCC ID: HV4-PN9315A Test Model: PN9315A Received Date: 2022/1/11 Test Date: 2022/1/19 ~ 2022/2/7 Issued Date: 2022/3/3 Applicant: Wacom Co., Ltd. Address: 2-510-1, Toyonodai, Kazo-shi Saitama 349-1148 Japan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RFBBMN-WTW-P21120099-1 Page No. 2 / 39 Report Format Version: 6.1.1 Reference No.: BBMN-WTW-P21120099 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 7 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 7 3.3 Description of Support Units ............................................................................................................... 9 3.3.1 Configuration of System under Test .................................................................................................... 9 3.4 General Description of Applied Standards ........................................................................................ 10 4 Test Types and Results ....................................................................................................................... 11 4.1 Radiated Emission Measurement ...................................................................................................... 11 4.1.1 Limits of Radiated Emission Measurement ........................................................................................ 11 4.1.2 Test Instruments ................................................................................................................................ 12 4.1.3 Test Procedures ................................................................................................................................. 14 4.1.4 Deviation from Test Standard ............................................................................................................ 14 4.1.5 Test Setup .......................................................................................................................................... 15 4.1.6 EUT Operating Conditions ................................................................................................................. 15 4.1.7 Test Results ....................................................................................................................................... 16 4.2 Conducted Emission Measurement .................................................................................................. 30 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 30 4.2.2 Test Instruments ................................................................................................................................ 30 4.2.3 Test Procedures ................................................................................................................................. 31 4.2.4 Deviation from Test Standard ............................................................................................................ 31 4.2.5 Test Setup ....................................…

Text truncated - open the document above for the full version.

Reference No.: BBMN-WTW-P21120099_TSup Page No. 1 / 5 Report No.: RFBBMN-WTW-P21120099-1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Reference No.: BBMN-WTW-P21120099_TSup Page No. 2 / 5 Report No.: RFBBMN-WTW-P21120099-1 RADIATED EMISSION TEST (Below 1GHz) Reference No.: BBMN-WTW-P21120099_TSup Page No. 3 / 5 Report No.: RFBBMN-WTW-P21120099-1 Reference No.: BBMN-WTW-P21120099_TSup Page No. 4 / 5 Report No.: RFBBMN-WTW-P21120099-1 RADIATED EMISSION TEST (Above 1GHz) Reference No.: BBMN-WTW-P21120099_TSup Page No. 5 / 5 Report No.: RFBBMN-WTW-P21120099-1 ---END---