HV4CDS600Digital Notepad

Important Product Information PRECAUTIONS Important information about this product - The device is not designed to protect terminals from damage in the event of being dropped, etc. The warranty does not cover damage to the terminal in the event of the device being dropped, etc. - Do not force items or notes into the pocket (or slot for inserting notes). Failure to observe this may result in damage. - Check the specifications for the device to discover the size and thickness of notes that can be used. Also, note that accuracy will differ in accordance with the notes in use. - Do not grip, raise or forcefully pull the rubber ring. Failure to observe this may result in damage. Warning - Do not dismantle or modify the device. Failure to observe this may result in heat generation, the outbreak of fire, electric shocks or other damage, including human injury. Dismantling the device will void the warranty. - Avoid damaging the USB cable. Do not place heavy objects on the cable, repeatedly bend it sharply, or apply heavy stress to the cable connector. Damage to or laceration of the USB cable, or water or other liquids coming into contact with it, may result in malfunction, electric shock or the outbreak of fire. - Do not expose the device to water or other liquids. Failure to observe this may result in malfunction or electric shock. In the event of liquid being spilled on the device, stop using it, switch off the power supply and contact your distributor or Wacom Customer Support Center. - Do not insert metallic objects or foreign objects into the device opening or connector terminal. Failure to observe this may result in malfunction, electric shock or fire damage. - Store the product in a location well out of the reach of children. Failure to observe this may result in children accidentally swallowing components or parts detached from the product. - Switch off the power supply before cleaning the device. Do not use alcohol and other organic solvents, or neutral detergents, as they may cause color change or other damage. Such damage is not covered by the manufacturer’s warranty. - Do not use or store the device in the following environments: - Environments subject to severe temperature fluctuations. - Environments subject to temperature and humidity ranges that exceed specified usage conditions (such as outdoors or inside vehicles, etc.) - Environments subject to dusty conditions. - Near to open flames. - The device contains metallic components. Cease use and immediately contact your doctor in the event of metal allergy symptoms arising during usage. Caution - Do not place or use the device on shaky, inclined, vibrating or other unstable surfaces or worktops. - Other Precautions: - Do not place metallic objects on top of the device or use it on top of metallic tables, etc. Keep the device away from magnets and magnetic fields. Failure to observe this may result in interference, malfunction or damage. - Do not use the pen if the nib is warped or bent. Failure to observe this may result in the pen not operating correctly. Do not apply excessive pressure to the nib when using the pen. Also, make sure the nib does not warp or bend. - Do not drop the device or use it to strike hard objects. Failure to observe this may result in damage. - Do not use ink nibs and nib extractors other than those specified by Wacom. Failure to observe this may result in damage. - Make sure the pen cap has been set properly in place to prevent pressure being applied to the nib when storing or transporting the pen. - Do not leave the device in the same location for long periods of time. Failure to observe this may result is discoloring, etc., to desktops and other surfaces. - Wacom cannot be held responsible for any laceration, damage or loss of data caused by the use of the device. Precautions Pertaining to Bluetooth Devices - Devices mounted with Bluetooth products may interfere with equipment used in aircrafts and other such forms of transport. Users are therefore obligated to switch off all radio communication devices when traveling in airplanes. - There is a chance that the device may interfere with or cause damage to other electronic equipment. There are also cases in which the effects of other radio communication devices may cause the device to malfunction. Make sure the device is switched off in locations where their use is banned to prevent interference with other electronic equipment. Wacom cannot be held responsible for damages. PRODUCT SPECIFICATIONS General Operating temperature 5 to 40 degrees C (41 to 104 degrees F) Battery charging temperature 5 to 40 degrees C (41 to 104 degrees F) Storage temperature -20 to +60 degrees C (-4 to 140 degrees F) Storage temperature for extended period up to 1 month -20 to +50 degrees C (-4 to 122 degrees F) up to 3 month -20 to +40 degrees C (-4 to 104 degrees F) up to 1 year -20 to +25 degrees C (-4 to 104 degrees F) Operating relative humidity 30 % up to 80% RH Storage relative humidity 30 % up to 90% RH Physical size (W x L x D) CDS-600C 200.5 x 253.1 x 21.1 mm, approximate CDS-600G 202.0 x 253.1 x 17.4 mm, approximate CDS-600P 205.5 x 253.1 x 29.5 mm, approximate (attaching Pen and standard Note Pad, excluding protrusion) Pen: 148.7 x 10.0 to 11.0 mm, approximate (including cap excluding protrusion) Weight CDS-600C: 580 g, CDS-600G: 535 g, CDS-600P: 670 g, approximate Pen: 22 g, approximate (Including cap) Transmission type Bluetooth ® Smart technology Data Transmission Rate 133 pps Power requirements DC 5V from USB port Connector USB Type A (port) to Micro B (device) Battery type Li-polymer battery Charging time 2.5 hours (typical) Continuous operation time 8 hours (typical) Power consumption Normal: 50mA, approximate Charging: 400mA, approximate Pressure levels 1024 levels Support paper thickness 5mm (approximately 50page of normal paper) Support paper size (Max) (W x D) 148 x 210 mm LIMITED WARRANTY (U.S.A. AND CANADA) Wacom warrants the product, to the original consu…

Text truncated - open the document above for the full version.

EN: Quick start guide DE: Schnellstartanleitung NL: Snelgids FR: Guide de mise en route IT: Guida rapida ES: Guía de arranque rápido PT-BR: Guia de inicialização rápida RU: Руководство по быстрому запуску PL: Podręcznik szybkiej instalacji JP: クイックスタートガイド KR: 퀵 스타트 가이드 TC: 快速入門指南 SC: 快速入门指南 BAMBOO Spark_QSG.indd 16/23/2015 9:41:45 AM Download Bamboo Spark app Bamboo Spark -You will need to use the Bamboo Spark app with your device. You can download the app for iOS or Android from the app store. -Learn more about Bamboo Spark and the accessories at http://www.wacom.com/bamboo-spark-start. Bamboo Spark -Sie benötigen die Bamboo Spark App für Ihr Gerät. Laden Sie sich die App für iOS oder Android aus dem App Store herunter. -Erfahren Sie mehr über Bamboo Spark und das Zubehör unter http://www.wacom.com/bamboo-spark-start. Bamboo Spark -Gebruik de Bamboo Spark-app met uw apparaat. U kunt de app voor iOS of Android uit de app store downloaden. -Meer informatie over Bamboo Spark en accessoires vindt u op http://www.wacom.com/bamboo-spark-start. Bamboo Spark -Vous devez utiliser l'application Bamboo Spark avec votre appareil. L'application est disponible en téléchargement pour iOS ou Android. -En savoir plus sur Bamboo Spark et les accessoires sur http://www.wacom.com/bamboo-spark-start. Bamboo Spark -Sarà necessario utilizzare l'app Bamboo Spark con il dispositivo. È possibile scaricare l'app per iOS o Android dall'App Store. -Ulteriori informazioni su Bamboo Spark e sugli accessori sono disponibili all'indirizzo http://www.wacom.com/bamboo-spark-start. Bamboo Spark -Deberá utilizar la aplicación Bamboo Spark con su dispositivo. Puede descargar la aplicación para iOS o Android desde la tienda de aplicaciones. -Para obtener más información acerca de Bamboo Spark y los accesorios, http://www.wacom.com/bamboo-spark-start. Bamboo Spark -É preciso utilizar o app Bamboo Spark em seu dispositivo. É possível baixar o app para iOS ou Android na loja do app. -Saiba mais sobre o Bamboo Spark e seus acessórios em http://www.wacom.com/bamboo-spark-start. BAMBOO Spark_QSG.indd 16/23/2015 9:41:45 AM 1 Bamboo Spark --Для-работы-с-устройством-необходимо-использовать-приложение-Bamboo-Spark.-Версию- приложения-для-iOS-или-Android-можно-загрузить-из-магазина-приложений. --Для-получения-дополнительной-информации-о-приложении-Bamboo-Spark-и-принадлежностях- посетите-веб-сайт-http://www.wacom.com/bamboo-spark-start. Bamboo Spark --Należy-skorzystać-z-aplikacji-Bamboo-Spark.-Aplikację-możesz-pobrać-w-wersji-na-system-iOS-oraz- Android-z-odpowiedniego-sklepu-z-aplikacjami. --Więcej-o-Bamboo-Spark-i-akcesoriach-dowiesz-się-na-stronie-- http://www.wacom.com/bamboo-spark-start. Bamboo Spark -お手持ちのデバイスでBamboo Sparkアプリを使用する必要があります。iOSまたはAndroid用の アプリは、App Storeからダウンロードできます。 -Bamboo Sparkおよびアクセサリの詳細は、http://www.wacom.com/bamboo-spark-startでご確 認ください。 Bamboo Spark -해당 장치에서는 Bamboo Spark 앱을 사용해야 합니다. 앱스토어에서 iOS 또는 Android용 앱을 다운로드할 수 있습니다. -http://www.wacom.com/bamboo-spark-start에서 Bamboo Spark 및 액세서리에 대해 자세히 알아 보세요. Bamboo Spark --您的裝置需要搭配Bamboo Spark應用程式使用。-您可以從應用程式商店下載適用於iOS或Android 系統的應用程式。 --進一步瞭解Bamboo Spark與配件的相關資訊，網址為：http://www.wacom.com/bamboo-spark-start。 Bamboo Spark --您的设备需要搭配Bamboo Spark应用程序使用。请从应用商店下载此应用 程序的iOS或Android版，更多下载信息，请访问- http://www.wacom.com/bamboo-spark-start --要了解有关-Bamboo Spark-和配件的更多信息，请访问-- http://www.wacom.com/bamboo-spark-start。 BAMBOO Spark_QSG.indd 16/23/2015 9:41:45 AM 2 Bamboo Spark Pen Paper notepad Bamboo Spark, with gadget pockets Bamboo Spark, with snap-fit for iPad Air 2 Bamboo Spark, with tablet sleeve USB cable (for charging) BAMBOO Spark_QSG.indd 26/23/2015 9:41:46 AM 3 About the buttons Power on Next page BAMBOO Spark_QSG.indd 36/23/2015 9:41:46 AM 4 Charging BAMBOO Spark_QSG.indd 46/23/2015 9:41:47 AM 5 Replacing the ink cartridge Replacement accessories NotepadInk cartridgeClosure band BAMBOO Spark_QSG.indd 56/23/2015 9:41:48 AM 6 LED indicators Blue / GreenOrange Blue blinkingPairing Blue solidPower on, Page has content Green solidPower on, Page is empty Orange blinkingLow battery Orange solidBattery charging Blue-Orange Memory full BAMBOO Spark_QSG.indd 66/23/2015 9:41:48 AM 7 Blau blinkendVerbinden Blau leuchtendAngeschaltet, Seite hat Inhalt Grün leuchtendAngeschaltet, Seite ist leer Orange blinkendNiedriger Ladestand Orange leuchtendLaden der Batterie Blau-Orange Speicher voll Knippert blauwKoppelen Brandt blauwIngeschakeld, pagina heeft inhoud Brandt groenIngeschakeld, pagina is leeg Knippert oranjeBijna leeg Brandt oranjeBatterij laadt op Blauw/oranje Geheugen vol Bleu clignotantJumelage Bleu fixeMise sous tension, la page possède du contenu Vert fixeMise sous tension, la page est vide Orange clignotantFaible charge Orange fixeBatterie en charge Bleu-Orange Mémoire pleine Blu lampeggiantePairing Blu fissoAccensione, pagina senza contenuto Verde fissoAccensione, pagina senza contenuto Arancione lampeggianteBatteria quasi esaurita Arancione fissoBatteria in fase di ricarica Blu/Arancione Memoria piena BAMBOO Spark_QSG.indd 76/23/2015 9:41:48 AM 8 Azul intermitenteEmparejamiento Azul fijoEncendido, la página tiene contenido Verde fijoEncendido, la página está vacía Naranja intermitenteBatería baja Naranja fijoBatería en carga Azul-naranja Memoria llena Piscando em azulEmparelhamento Azul fixoLigado, A página tem conteúdo Verde fixoLigado, A página está vazia Laranja piscandoBateria fraca Laranja sólidoBateria carregando Azul-Laranja Memória cheia Мигает-синимСоединение- Постоянно-светится-синимПитание-включено;-на-странице-имеется-содержимое Постоянно-светится-зеленымПитание-включено;-страница-пуста Мигает-оранжевымНизкий-уровень-заряда Постоянно-светится- оранжевым Выполняется-зарядка-батареи Включены-синий-и-оранжевый- индикаторы- Память-заполнена Migające-niebieskie-światłoParowanie- Ciągłe-niebieskie-światłoUrządzenie-włączone,-strona-zawiera-treść Ciągłe-zielone-światłoUrządzenie-włączone,-strona-jest-pusta Migające-pomarańczowe-światłoNiski-poziom-energii Ciągłe-pom…

Text truncated - open the document above for the full version.

Report No. : 150613E01 Page 1 CONSTRUCTION PHOTOS OF EUT Model : CDS-600 Report No. : 150613E01 Page 2 Report No. : 150613E01 Page 14 Report No. : 150613E01 Page 15

Report No. : 150613E01 Page 3 Model : CDS-600 Report No. : 150613E01 Page 4 Report No. : 150613E01 Page 5 Report No. : 150613E01 Page 6 Report No. : 150613E01 Page 7 Report No. : 150613E01 Page 8 Report No. : 150613E01 Page 9 Report No. : 150613E01 Page 10 Report No. : 150613E01 Page 11 Report No. : 150613E01 Page 12 Report No. : 150613E01 Page 13

Report No.: SA150613E01 Page No. 1 / 6 Report Format Version: 6.1.1 RF Exposure Report Report No.: SA150613E01 FCC ID: HV4CDS600 Model No.: CDS-600*******(* may be alphanumeric/symbol or blank) Received Date: June 12, 2015 Test Date: June 17, 2015 Issued Date: July 08, 2015 Applicant: Wacom Co., Ltd. Address: 2-510-1 Toyonodai, Kazo-shi, Saitama 349-1148 Japan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA150613E01 Page No. 2 / 6 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Evaluation Result .................................................................................................................................. 5 3 Antenna Gain ......................................................................................................................................... 5 4 SAR Test Exclusion Thresholds .......................................................................................................... 6 5 Conclusion ............................................................................................................................................ 6 Report No.: SA150613E01 Page No. 3 / 6 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA150613E01 Original release. July 08, 2015 Report No.: SA150613E01 Page No. 5 / 6 Report Format Version: 6.1.1 2 Evaluation Result Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz .  Power and distance are rounded to the nearest mW and mm before calculation .  The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. 3 Antenna Gain The antenna provided to the EUT, please refer to the following table: Brand Antenna Type Antenna Gain (dBi) Frequency range (GHz to GHz) Connecter Type USI Printed 3.7 2.4~2.4835 NA Report No.: SA150613E01 Page No. 6 / 6 Report Format Version: 6.1.1 4 SAR Test Exclusion Thresholds Maximum measured transmitter power: Frequency (GHz) Max. Power (mW) Min. test separation distance (mm) SAR test exclusion calculation value (NOTE 2) 1-g SAR test exclusion thresholds Result 2.402 ~ 2.480 2.051 5 0.636 3 Pass NOTE: 1. The antenna type is printed antenna with 3.7dBi gain. 2. Calculate SAR test exclusion thresholds from condition “1” formulas. 5 Conclusion Since So…

Text truncated - open the document above for the full version.

Report No.: RF150613E01-1 1 Report Format Version 4.2.0 FCC TEST REPORT REPORT NO.: RF150613E01-1 MODEL NO.: CDS-600*******(* may be alphanumeric/symbol or blank) FCC ID:HV4CDS600 RECEIVED:May 28, 2015 TESTED:May 28 to June 17, 2015 ISSUED: July 08, 2015 APPLICANT: Wacom Co., Ltd. ADDRESS: 2-510-1 Toyonodai, Kazo-shi Saitama 349-1148 Japan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150613E01-1 2 Report Format Version 4.2.0 Table of Contents RELEASE CONTROL RECORD .......................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. SUMMARY OF TEST RESULTS .............................................................................. 5 2.1 MEASUREMENT UNCERTAINTY ........................................................................... 6 3. GENERAL INFORMATION ....................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ......................................................................... 7 3.2 DESCRIPTION OF TEST MODES ........................................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ........................... 9 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................ 10 3.4 DESCRIPTION OF SUPPORT UNITS ................................................................... 11 3.5 CONFIGURATION OF SYSTEM UNDER TEST .................................................... 11 4. TEST TYPES AND RESULTS ................................................................................ 12 4.1 CONDUCTED EMISSION MEASUREMENT ......................................................... 12 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT....................................... 12 4.1.2 TEST INSTRUMENTS ........................................................................................... 12 4.1.3 TEST PROCEDURES ............................................................................................ 13 4.1.4 DEVIATION FROM TEST STANDARD .................................................................. 13 4.1.5 TEST SETUP ......................................................................................................... 14 4.1.6 EUT OPERATING CONDITIONS ........................................................................... 14 4.1.7 TEST RESULTS ..................................................................................................... 15 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................. 17 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .............. 17 4.2.2 TEST INSTRUMENTS ........................................................................................... 18 4.2.3 TEST PROCEDURES ............................................................................................ 20 4.2.4 DEVIATION FROM TEST STANDARD .................................................................. 21 4.2.5 TEST SETUP ......................................................................................................... 22 4.2.6 EUT OPERATING CONDITIONS ........................................................................... 23 4.2.7 TEST RESULTS ..................................................................................................... 24 4.2.8 TEST RESULTS (SPECTRUM BANDWIDTH) ....................................................... 26 5. PHOTOGRAPHS OF THE TEST CONFIGURATION ............................................. 27 6. INFORMATION ON THE TESTING LABORATORIES ........................................... 28 7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB................................................................................................. 29 Report No.: RF150613E01-1 3 Report Format Version 4.2.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF150613E01-1 Original release July 08, 2015 Report No.: RF150613E01-1 5 Report Format Version 4.2.0 2. SUMMARY OF TEST RESULTS T…

Text truncated - open the document above for the full version.

Report No.: RF150613E01 Page No. 1 / 35 Report Format Version: 6.1.1 FCC Test Report (BT-LE) Report No.: RF150613E01 FCC ID: HV4CDS600 Model No.: CDS-600*******(* may be alphanumeric/symbol or blank) Received Date: May 28, 2015 Test Date: June 12 to 18, 2015 Issued Date: July 08, 2015 Applicant: Wacom Co., Ltd. Address: 2-510-1 Toyonodai, Kazo-shi, Saitama 349-1148 Japan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150613E01 Page No. 2 / 35 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT (BT-LE) ................................................................................................... 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Duty Cycle of Test Signal .................................................................................................................. 10 3.4 Description of Support Units .............................................................................................................. 11 3.4.1 Configuration of System under Test ................................................................................................... 11 3.5 General Description of Applied Standards ........................................................................................ 12 4 Test Types and Results ...................................................................................................................... 13 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 13 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 13 4.1.2 Test Instruments ................................................................................................................................ 14 4.1.3 Test Procedures ................................................................................................................................. 16 4.1.4 Deviation from Test Standard ............................................................................................................ 16 4.1.5 Test Setup .......................................................................................................................................... 17 4.1.6 EUT Operating Conditions ................................................................................................................. 17 4.1.7 Test Results ..........................................................................................…

Text truncated - open the document above for the full version.