HV4CS500PActive stylus for tablets

Important Product Information PRECAUTIONS Important information about your Intuos Creative Stylus Intuos Creative Stylus supports the native resolution of your input device touch sensor. See the device specifications for details about the specific resolution. If you are using a protective foil on your touch screen, you may experience a different stylus-on-screen feeling when writing or drawing. We do not recommend using a protective foil. The writing and drawing experience on your touch device may vary depending on the application you are using. The pen tip may leave minor marks on the screen. If this occurs, wipe the screen with a soft, dry cloth or other material as directed by the tablet manufacturer. Rubber pen tips are exchangeable. Wen the rubber degrades there is a possibility of damage to the tablet’s LCD screen and changing it out is recommended. When you perform a pairing operation between Intuos Creative Stylus and a device, press the center of the pen button so that the entire button may be pressed down evenly. Pairing is established when the LED lights up. Warning Parts of the product can present a choking hazard. Keep away from children. Small parts may accidentally be swallowed. Do not put the product close to fire or use in high temperature conditions. Usage notes When using your Intuos Creative Stylus, make sure that there is no direct contact between any metal parts of the pen and the screen. Avoid tapping or hitting the screen with metal objects such as the pen body, as screens may become damaged or scratched Wacom makes no warranty with respect to any damage or loss of data from the use of your Intuos Creative Stylus. To avoid possible damage or malfunction, do not apply excessive force to the pen tip or side switch button of the Intuos Creative Stylus. Please always use the pen case when the pen is not in use and during transportation. Do not drop your Intuos Creative Stylus or use it to strike any object. It might cause damage to it. To avoid malfunction, keep this product away from magnets and magnetic fields. Please do not disassemle or modify as it can lead to breakage. Caution Regarding Batteries Please use only AAAA batteries. When not using for extended periods of time, please remove the batteries as it could lead to leakage. The original batteries are equipped only for tests. Please replace the batteries as soon as possible. SPECIFICATIONS General Operating temperature+5°C to +40°C Storage temperature-10°C to +60°C Operating relative humidity30 % up to 80% RH Storage relative humidity30 % up to 90% RH Pen Physical size (L * D)135 x 14.2 mm, approximately Weight25 g, approximately Transmission typeBluetooth 4.0 Battery typeAlkaline battery(size: AAAA), 1pcs Working time150 hours (typical) Pressure levels2048 levels Tilt range+/- 45 degrees Data Transmission Rate33 rps REGULATORY STATEMENT FCC NOTICE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. You can determine whether the equipment is causing interference by disconnecting it from your computer. If the interference stops, it was probably caused by the equipment. If the equipment does cause interference to radio or television reception, you may be able to correct the interference by using one or more of the following measures: • Rotate the television or radio antenna until the interference stops. • Move the equipment farther away from the television or radio. • Plug the equipment and computer into an outlet that is on a different circuit from the television or radio. If necessary, consult your Wacom dealer or an experienced radio/ television technician for help. Changes or modifications to this product not authorized by Wacom could void the FCC Certification and negate your authority to operate the product. FCC RF Radiation Exposure Statement: The product complies with the US/Canada portable RF (radiofrequency) exposure limit set forth for an uncontrolled environment and is safe for the intended operation as described in this document. Further RF exposure reduction can be achieved if the product is kept as far as possible from the user’s body or if the device is set to lower output power if such function is available. INDUSTRY CANADA (CANADA ONLY) This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement: The product comply with the US/Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. LIMITED WARRANTY (U.S.A. AND CANADA) Wacom warrants the product, to the original consumer purchaser, except for the Software and consumable items such as the battery, pen cartridges, tablet surface sheet and nibs, to be free from defects in materials and workmanship under normal use and service for a period of one (1) year, from the date of original r…

Text truncated - open the document above for the full version.

PRN-A932 ON Light blue Chamomile_北米アジア.indd 1Chamomile_北米アジア.indd 12013-4-15 12:08:052013-4-15 12:08:05 Available software For a list of available software, visit the Wacom web site. Register your Bamboo For USA, Canada, Central and South America Visit www.wacom.com and select your region. Then choose the registration option. For Asia Pacific Visit https://www.wacom-asia.com/register/english and select your region. Then choose the registration option. Support options For USA, Canada, Central and South America Visit our web site at http://support.wacom.com/us/en Call the Wacom Customer Care Center. Available in English, from 7:30 am to 5:00 pm Monday -Thursday, and 8:30 am to 5:00 pm Friday (Pacific Time) at 360-896-9833. For Asia Pacific Visit our web site at http://www.wacom.asia/customer-care Logiciels disponibles Pour obtenir une liste des logiciels disponibles, consultez le site Web de Wacom. Enregistrement de votre Bamboo Rendez-vous sur www.wacom.com et sélectionnez votre région. Sélectionnez ensuite l'option d'enregistrement. Options d'assistance Rendez-vous sur notre site http://support.wacom.com/us/en Contactez le centre de support client Wacom. Software disponible Si deseas obtener una lista del software disponible, visita el sitio Web de Wacom. Registrar Bamboo Visita www.wacom.com y selecciona tu región. A continuación, selecciona la opción de registro. Opciones de Servicio técnico Visita nuestro sitio Web en http://support.wacom.com/us/es Llama al centro de atención al cliente de Wacom. Software disponível Para obter uma lista de softwares disponíveis, acesse o site da Wacom. Registre a sua Bamboo Acesse www.wacom.com, selecione a sua região e a opção de registro. Opções de suporte Acesse http://support.wacom.com/us/pt Ligue para a Central de Atendimento ao Cliente da Wacom. 사용 가능한 소프트웨어 사용 가능한 소프트웨어의 목록은 Wacom 웹 사이트를 방문하 십시오. Bamboo 등록 https://www.wacom-asia.com/register/korean 을 방문하여 해당 지역을 선택한 다음 등록 옵션을 선택하십시오. 지원 옵션 자사 웹 사이트(http://www.wacom.asia/kr/customer-care) 을 방문하십시오. 可用軟體 如需可用軟體清單，請造訪Wacom網站。 註冊 Bamboo 台灣地區用戶請造訪 https://www.wacom-asia.com/register/chinese，選取您所在的 地區。然後選取註冊選項。 香港地區用戶請訪問 http://www.wacom.com.hk/register/ 支援選項 台灣地區用戶請造訪 https://www.wacom-asia.com/tw/support 香港地區 請訪問我們的網站 www.wacom.com.hk/support/ 請致電Wacom 客服熱線 +852-25731988 (服務語言: 粵語，英語，普通話) 周一至周五 09:00-18:00 可用软件 如需可用软件列表，请访问Wacom网站。 注册 Bamboo 中国大陆地区用户请访问： http://www.wacom.com.cn/register/ 服务支持 大陆地区 请访问我们的网站 www.wacom.com.cn/support/ 请致电Wacom客户服务中心400-810-5460（普通话） 周一至周日 9:00-18:00 © 2013 Wacom Co., Ltd. All rights reserved. Wacom is registered trademarks of Wacom Co., Ltd. All other company or product names are trademarks and/or registered trademarks of the respective company. Modifications and errors excepted. Light orange Chamomile_北米アジア.indd 2Chamomile_北米アジア.indd 22013-4-15 12:08:062013-4-15 12:08:06

Page 1 CONSTRUCTION PHOTOS OF EUT

Page 2 Page 3 Page 4

Report No.: SA130430D09 1 of 6 Report Format Version 5.0.0 RF EXPOSURE REPORT REPORT NO.: SA130430D09 MODEL NO.: CS-500P FCC ID: HV4CS500P RECEIVED: Apr. 30, 2013 TESTED: Apr. 30 ~ May 7, 2013 ISSUED: May 14, 2013 APPLICANT: Wacom Co., Ltd. ADDRESS: 2-510-1 Toyonodai Kazo-shi, Saitama Japan 349-1148 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA130430D09 2 of 6 Report Format Version 5.0.0 Table of Contents RELEASE CONTROL RECORD ............................................................................................ 3 1. CERTIFICATION ......................................................................................................... 4 2. EVALUATION RESULT ............................................................................................... 5 3. SAR TEST EXCLUSION THRESHOLDS .................................................................... 6 4. CONCLUSION ............................................................................................................ 6 Report No.: SA130430D09 3 of 6 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA130430D09 Original release May 14, 2013 Report No.: SA130430D09 4 of 6 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: active stylus for tablets MODEL NO.: CS-500P BRAND: Wacom APPLICANT: Wacom Co., Ltd. TESTED: Apr. 30 ~ May 7, 2013 TEST SAMPLE: MASS-PRODUCTION STANDARDS: FCC Part 2 (Section 2.1093) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: May 14, 2013 ( Celia Chen / Senior Specialist ) APPROVED BY : , DATE: May 14, 2013 ( Ken Liu / Senior Manager ) Report No.: SA130430D09 5 of 6 Report Format Version 5.0.0 2. EVALUATION RESULT Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,16 where ÿ f(GHz) is the RF channel transmit frequency in GHz . ÿPower and distance are rounded to the nearest mW and mm before calculation. ÿThe result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. Report No.: SA130430D09 6 of 6 Report Format Version 5.0.0 3. SAR TEST EXCLUSION THRESHOLDS Maximum measured transmitter power: Frequency (GHz) Max. Power (mW) Min. test separation distance (mm) SAR test exclusion calculation value (NOTE 2) 10-g extremity SAR test exclusion thresholds Result 2.402 ~ 2.480 0.2 5 0.062 7.5 Pass NOTE: 1. The antenna type is Multilayer ceramic antenna with -4.11dBi gain. 2. Calculate SAR test exclusion thresholds from condition “1” formulas. 4. CONCLUSION Since Source-base time average power is below SAR test exclusion power thresholds, the SAR evaluation is not required.

Report No.: RF130430D09 1 of 33 Report Format Version 5.1.0 FCC TEST REPORT REPORT NO.: RF130430D09 MODEL NO.: CS-500P FCC ID: HV4CS500P RECEIVED: Apr. 30, 2013 TESTED: Apr. 30 ~ May 7, 2013 ISSUED: May 14, 2013 APPLICANT: Wacom Co., Ltd. ADDRESS: 2-510-1 Toyonodai Kazo-shi, Saitama Japan 349-1148 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF130430D09 2 of 33 Report Format Version 5.1.0 Table of Contents RELEASE CONTROL RECORD............................................................................. 4 1. CERTIFICATION .......................................................................................... 5 2. SUMMARY OF TEST RESULTS .................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ............................................................... 6 3. GENERAL INFORMATION .......................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................. 7 3.2 DESCRIPTION OF TEST MODES ............................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............... 9 3.3 DESCRIPTION OF SUPPORT UNITS ....................................................... 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ........................................ 11 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................ 12 4. TEST TYPES AND RESULTS .................................................................... 13 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ..................... 13 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ....................................................................................... 13 4.1.2 TEST INSTRUMENTS ............................................................................... 14 4.1.3 TEST PROCEDURES ................................................................................ 15 4.1.4 DEVIATION FROM TEST STANDARD ...................................................... 15 4.1.5 TEST SETUP ............................................................................................. 16 4.1.6 EUT OPERATING CONDITIONS ............................................................... 16 4.1.7 TEST RESULTS ......................................................................................... 17 4.2 CONDUCTED EMISSION MEASUREMENT ............................................. 22 4.3 6DB BANDWIDTH MEASUREMENT ......................................................... 22 4.3.1 LIMITS OF 6DB BANDWIDTH MEASUREMENT ...................................... 22 4.3.2 TEST SETUP ............................................................................................. 22 4.3.3 TEST INSTRUMENTS ............................................................................... 22 4.3.4 TEST PROCEDURE .................................................................................. 22 4.3.5 DEVIATION FROM TEST STANDARD ...................................................... 22 4.3.6 EUT OPERATING CONDITIONS ............................................................... 22 4.3.7 TEST RESULTS ......................................................................................... 23 4.4 CONDUCTED OUTPUT POWER .............................................................. 24 4.4.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT ............... 24 4.4.2 TEST SETUP ............................................................................................. 24 4.4.3 TEST INSTRUMENTS ............................................................................... 24 4.4.4 TEST PROCEDURES ................................................................................ 24 4.4.5 DEVIATION FROM TEST STANDARD ...................................................... 24 4.4.6 EUT OPERATING CONDITIONS ............................................................... 24 4.4.7 TEST RESULTS ......................................................................................... 25 4.5 POWER SPECTRAL DENSITY MEASUREMENT ..................................... 26 4.5.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT .................. 26 4.5.2 TEST SETUP ............................................................................................. 26 4.5.3 TEST INSTRUMENTS ............................................................................... 26 4.5.4 TEST PROCEDURE…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST