HV4CS600Active stylus for tablets

EN 1. Enable Bluetooth ® wireless technology. 2. Open a compatible app and enable the stylus support in this app. 3. See intuoscreativestylusgo.wacom.com for detailed instructions. 4. Press side-button on stylus -> LED flashes blue. 5. LED blue for 2 seconds -> Pairing activated. 6. Repeat steps 2-4 when pairing with another app for the first time. DE 1. Schalten Sie die Bluetooth ® Wireless-Technologie ein. 2. Öffnen Sie eine kompatible App und schalten Sie dort die Stift-Unterstützung ein. 3. Weiterführende Anweisungen finden Sie unter intuoscreativestylusgo.wacom.com 4. Betätigen Sie die Taste auf der Seite des Stifts -> LED blinkt blau. 5. LED 2 Sekunden lang blau -> Pairing aktiviert. 6. Schritte 2-4 wiederholen für jede weitere App bei erster Verwendung NL 1. Schakel de draadloze Bluetooth ® -technologie in. 2. Open een compatibele app en schakel de ondersteuning voor de stylus in deze app in. 3. Kijk op intuoscreativestylusgo.wacom.com voor gedetailleerde instructies. 4. Druk op de toets aan de zijkant van de stylus -> LED knippert blauw. 5. LED 2 seconden blauw -> Koppeling geactiveerd. 6. Herhaal stappen 2-4 voor het koppelen van een andere app bij het eerste gebruik. FR 1. Activez la technologie sans fil Bluetooth ® . 2. Ouvrez une app compatible et activez le support du stylet dans cette application. 3. Pour des instructions détaillées, veuillez consulter intuoscreativestylusgo.wacom.com. 4. Appuyez sur le bouton situé sur le côté du stylet -> La LED clignote en bleu. 5. La LED bleue s'allume pendant 2 secondes -> La connexion est activée. 6. Répétez les étapes 2-4 lorsque vous connectez une autre app pour la première fois. IT 1. Attivare la tecnologia senza fili Bluetooth ® . 2. Aprire una app compatibile e attivare da qui il supporto per la penna. 3. Informazioni dettagliate sono disponibili su intuoscreativestylusgo.wacom.com 4. Premere il pulsante sul lato della penna -> LED blu lampeggia. 5. LED blu per 2 secondi -> Associazione attivata. 6. Se si esegue l'associazione per la prima volta con un'altra app, ripetere i passi 2-4. ES 1. Active la tecnología inalámbrica Bluetooth ® . 2. Abra una aplicación compatible y habilite la compatibilidad con el lápiz digital en la misma. 3. En intuoscreativestylusgo.wacom.com, encontrará instrucciones detalladas. 4. Pulse el botón lateral del lápiz digital -> El LED parpadea en azul. 5. El LED se ilumina en azul durante 2 segundos -> Emparejamiento activado. 6. Repita los pasos 2-4 para cualquier otra aplicación que vaya a usar por primera vez. PT-BR 1. Ligue a tecnologia sem fio Bluetooth ® 2. Abra um aplicativo compatível e acione o suporte para a caneta 3. Para mais instruções, consulte intuoscreativestylusgo.wacom.com 4. Pressione o botão na lateral da caneta -> o LED pisca em azul. 5. LED por 2 segundos azul -> Emparelhamento ativado. 6. Repetir os passos 2 até 4 para cada novo aplicativo na primeira utilização RU 1. Включите беспроводную технологию Bluetooth®. 2. Откройте совместимое приложение и включите в нем поддержку стилуса. 3. См. подробные инструкции на сайте intuoscreativestylusgo.wacom.com. 4. Нажмите боковую кнопку на стилусе -> светодиод мигает синим цветом. 5. Светодиод остается синим на 2 с -> Связывание активировано. 6. Повторите шаги 2-4 при первом связывании с другим приложением. PL 1. Włącz bezprzewodową technologię Bluetooth®. 2. Otwórz kompatybilną aplikację, a następnie włącz w niej wsparcie dla pióra. 3. Szczegółowa instrukcja znajduje się na stronie: intuoscreativestylusgo.wacom.com 4. Naciśnij przycisk znajdujący się z boku pióra -> Dioda LED miga na niebiesko. 5. Dioda LED pali się przez 2 sek. na niebiesko -> Parowanie aktywowane. 6. Powtórz kroki od 2 do 4 dla każdej kolejnej aplikacji przy pierwszym uruchomieniu JP KR 1. Bluetooth ® 무선 기술을 작동시키십시오. 2. 호환되는 앱을 열고 이 앱에서 스타일러스 지원을 작동시키십시오. 3. intuoscreativestylusgo.wacom.com에서 자세한 지침을 확인하십시오. 4. 스타일러스의 슬라이드 버튼을 눌러 줍니다. -> LED가 파란 색으로 켜집니다. 5. LED가 2초 동안 파란색으로 켜지면서 -> 페어링이 작동됩니다. 6. 다른 앱과 처음으로 페어링을 할 때는 위의 2-4 단계를 반복하십시오. TC 1. ® 2. 3. intuoscreativestylusgo.wacom.com 4. -> LED 5. LED 2 -> 6. 2 4 SC 1. ® 2. 3. intuoscreativestylusgo.wacom.com 4. -> LED 5. LED 2 -> 6. 2 4 • Pen case• Pen nib • Stylus• USB cable Orange LED ENDENLFRITESPT-BRRUPLJPKRTCSC Blue Connecting Verbindet Verbinding maken Connexion... Connessione in corso ConectandoConectando Подключается Łączenie 연결 중 (1s) Connected Verbunden Verbonden ConnectéConnessoConectado Conectado Подключено Połączono 연결됨 Orange Battery low Batterie fast leer Batterij bijna leeg Batterie faible Batteria in esaurimento Batería baja Bateria fraca Низкий заряд батареи Niski poziom baterii 배터리 부족 Charging Batterie lädt Batterij laden Chargement...In caricaCargandoCarregando Заряжается Ładowanie 배터리 충전 중 intuoscreativestylusgo.wacom.com Nib replacement EN Register your Intuos Creative Stylus For USA, Canada, Central and South America Visit www.wacom.com and select your region. Then choose the registration option. For Europe Visit our web site at www.wacom.eu/register For Asia Pacific Visit https://register.wacom.asia/ user/register and select your region. Then choose the registration option. Support options For USA, Canada, Central and South America Visit our web site at http://us.wacom.com/en/support Call the Wacom Customer Care Center. Available in English, from 7:30 am to 5:00 pm Monday -Thursday, and 8:30 am to 5:00 pm Friday (Pacific Time) at 360-896-9833. As for how to work with the Intuos Creative Stylus, please refer to intuoscreativestylusgo.wacom.com For Europe Technical Support is available from Monday - Friday 9:00 to 18:00 (Central European Time). United Kingdom: +44 (0) 207 744 0831 Contact form: http://www.wacom.eu/contact As for how to work with the Intuos Creative Stylus, please refer to intuoscreativestylusgo.wacom.com For Asia Pacific Visit our web site at http://www.wacom.asia/customer- care As for how to work with the Intuos Creative Stylus, please refer to intuoscreativestylusgo.wacom.com DE Int…

Text truncated - open the document above for the full version.

Report No.: 140421E04 Page 1 CONSTRUCTION PHOTOS OF EUT

(Fig. 1) FCC ID: HV4CS600 FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. Label

Report No.: 140421E04 Page 2 Report No.: 140421E04 Page 3 Report No.: 140421E04 Page 4 Report No.: 140421E04 Page 5

Report No.: SA140421E04 R1 1 of 6 Report Format Version 5.0.0 Cancels and replaces the report No.: SA140421E04dated May 13, 2014 RF EXPOSURE REPORT REPORT NO.: SA140421E04 R1 MODEL NO.: CS-600 FCC ID: HV4CS600 RECEIVED: Apr. 21, 2014 TESTED: Apr. 24, 2014 ISSUED: May 14, 2014 APPLICANT: Wacom Co., Ltd. ADDRESS: 2-510-1 Toyonodai, Kazo-shi, Saitama 349-1148 Japan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA140421E04 R1 2 of 6 Report Format Version 5.0.0 Cancels and replaces the report No.: SA140421E04dated May 13, 2014 TABLE OF CONTENTS RELEASE CONTROL RECORD .................................................................................... 3 1. CERTIFICATION .................................................................................................... 4 2. EVALUATION RESULT ......................................................................................... 5 3. SAR TEST EXCLUSION THRESHOLDS............................................................... 6 4. CONCLUSION ....................................................................................................... 6 Report No.: SA140421E04 R1 3 of 6 Report Format Version 5.0.0 Cancels and replaces the report No.: SA140421E04dated May 13, 2014 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA140421E04 Original release May 13, 2014 SA140421E04 R1 Revised model name. May 14, 2014 Report No.: SA140421E04 R1 4 of 6 Report Format Version 5.0.0 Cancels and replaces the report No.: SA140421E04dated May 13, 2014 1. CERTIFICATION PRODUCT: Active stylus for tablets BRAND NAME: Wacom MODEL NO.: CS-600 TEST SAMPLE: ENGINEERING SAMPLE APPLICANT: Wacom Co., Ltd. TESTED DATE: Apr. 24, 2014 STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: CS-600) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: May 13, 2014 ( Midoli Peng, Specialist ) APPROVED BY : , DATE: May 13, 2014 ( May Chen, Manager ) Report No.: SA140421E04 R1 5 of 6 Report Format Version 5.0.0 Cancels and replaces the report No.: SA140421E04dated May 13, 2014 2. EVALUATION RESULT Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR where ÿ f(GHz) is the RF channel transmit frequency in GHz ÿ Power and d istance are rounded to the nearest mW and mm before calculation ÿ The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. Report No.: SA140421E04 R1 6 of 6 Report Format Version 5.0.0 Cancels and replaces the report No…

Text truncated - open the document above for the full version.

Report No.: RF140421E04 R1 1 of 42 Report Format Version 5.2.0 Cancels and replaces the report No.: RF140421E04 dated May 13, 2014 FCC TEST REPORT (15.247) REPORT NO.: RF140421E04 R1 MODEL NO.: CS-600 FCC ID: HV4CS600 RECEIVED: Apr. 21, 2014 TESTED: Apr. 23 to 29, 2014 ISSUED: May 14, 2014 APPLICANT: Wacom Co., Ltd. ADDRESS: 2-510-1 Toyonodai, Kazo-shi, Saitama 349-1148 Japan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF140421E04 R1 2 of 42 Report Format Version 5.2.0 Cancels and replaces the report No.: RF140421E04 dated May 13, 2014 Table of Contents RELEASE CONTROL RECORD ........................................................................................ 4 1. CERTIFICATION .................................................................................................... 5 2. SUMMARY OF TEST RESULTS ............................................................................ 6 2.1 MEASUREMENT UNCERTAINTY .......................................................................... 7 3. GENERAL INFORMATION ..................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ....................................................................... 8 3.2 DESCRIPTION OF TEST MODES ....................................................................... 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ........................ 11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................... 13 3.4 DUTY CYCLE OF TEST SIGNAL ......................................................................... 14 3.5 DESCRIPTION OF SUPPORT UNITS .................................................................. 15 3.6 CONFIGURATION OF SYSTEM UNDER TEST ................................................... 16 4. TEST TYPES AND RESULTS .............................................................................. 17 4.1 CONDUCTED EMISSION MEASUREMENT ........................................................ 17 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ...................................... 17 4.1.2 TEST INSTRUMENTS .......................................................................................... 17 4.1.3 TEST PROCEDURES .......................................................................................... 18 4.1.4 DEVIATION FROM TEST STANDARD ................................................................. 18 4.1.5 TEST SETUP ....................................................................................................... 18 4.1.6 EUT OPERATING CONDITIONS ......................................................................... 19 4.1.7 TEST RESULTS ................................................................................................... 20 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................ 22 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .............. 22 4.2.2 TEST INSTRUMENTS .......................................................................................... 23 4.2.3 TEST PROCEDURES .......................................................................................... 24 4.2.4 DEVIATION FROM TEST STANDARD ................................................................. 24 4.2.5 TEST SETUP ....................................................................................................... 25 4.2.6 EUT OPERATING CONDITIONS ......................................................................... 25 4.2.7 TEST RESULTS ................................................................................................... 26 4.3 6dB BANDWIDTH MEASUREMENT .................................................................... 30 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT .................................................. 30 4.3.2 TEST INSTRUMENTS .......................................................................................... 30 4.3.3 TEST PROCEDURE ............................................................................................. 30 4.3.4 DEVIATION FROM TEST STANDARD ................................................................. 3…

Text truncated - open the document above for the full version.

Report No.: 131022E03C Page 1 Reference No.: 140303E12 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: 131022E03C Page 2 Reference No.: 140303E12 RADIATED EMISSION TEST (Below 1GHz) Report No.: 131022E03C Page 3 Reference No.: 140303E12 Report No.: 131022E03C Page 4 Reference No.: 140303E12 RADIATED EMISSION TEST (Above 1GHz)