HV4DTH2400LCD Tablet

Installation Guide & Hardware Manual 설치 가이드 및 하드웨어 설명서 安裝指南及硬體手冊 安装指南与硬件手册 DTH-2400 DTH-2400.indd 12011/03/25 13:27:18 Notice for this product Install the driver software for correct pen and this product. The following Help and Support information provides information about this product. Help and Support informationDescription User's Manual PDF document The User's Manual is downloaded to your computer when the driver software is installed. Refer to the User's Manual to learn the useful information such as changing cables, using a VESA mount, troubleshooting and so on. Important product information PDF document The Important product information is included in the installation CD. It contains precautions, product specifications, and other important information. Quick Start Guide (This document) Printed document The Quick Start Guide provides a general overview of this product, including information such as how to use the product, and how to connect it to a PC. • • DTH-2400.indd 22011/03/25 13:27:18  Welcome message Dear Customer, Thank you for buying this product pen display. Many customers tell us that this product is critical to helping them be both more productive and more creative. For them, this product has become an essential part of their workflow. We appreciate the trust you place in us and our responsibility to provide you with the best creative tools possible. To bring this latest product to market we have spent many hours talking to customers and incorporating your feedback. For example we have increased the size, resolution and color gamut over the earlier product models. We also noticed that many of you work many hours a day, often struggling to meet a deadline while juggling numerous projects. Some of you experience aches and pains as a result. Consequently we have designed the ergonomics of this product for unparalleled flexibility on how it can be positioned on your desk. It has been one of our major goals that the product you are about to use will be comfortable and easy to use. There are many other enhancements and improvements in this latest product. We encourage you to read this Quick Start Guide and at least scan the manual which will help you get the most out of your purchase. We wish you the best of success in your creative endeavors. Sincerely This product Development Team DTH-2400.indd 12011/03/25 13:27:18  Supplied accessories Accessories not supplied with all models. Check the contents listed on the product packaging. See the User's Manual to replace pen nib and personalize your pen. See the User's Manual for information on attaching the VESA Mount. DTH-2400.indd 22011/03/25 13:27:19  Connecting this product  Turn off your computer. 2 Connect the DVI-D cable or DisplayPort cable to the corresponding connector on your computer. Note that the DisplayPort cable is shipped inside the stand. See the following page for instructions. Connections can also be made with the included DVI-I to VGA cable. See the User's Manual for more information. DTH-2400.indd 32011/03/25 13:27:19  When using the DisplayPort cable, remove from the stand as shown.  Plug the USB connector into an available USB port on your computer or a USB hub attached to your computer. DTH-2400.indd 42011/03/25 13:27:19  4 Plug the power cable into the power adapter and then into an AC outlet. DTH-2400.indd 52011/03/25 13:27:20   Turn on this product. The power LED will change from orange to blue. 6 Turn on your computer. If a DVI-I to VGA cable is connected, configure the color resolution and size settings while looking at the display. Then, open the menu screen, and select [Screen Setting] > [Auto Adjust]. For information on how to open the menu screen, see the User's Manual. DTH-2400.indd 62011/03/25 13:27:20  Installing the tablet driver Save your work and close all open applications.  Insert this product installation CD. If the software installer menu is not automatically displayed, double-click on the Install icon located on the CD. 2 In the displayed dialog, click Install Tablet and follow the prompts. The User's Manual is downloaded to your computer when the driver software is installed. Click the Important Product Information menu in the dialog to view the Important Product Information guide for this product. It includes product safety precautions, specifications, and other important information. DTH-2400.indd 72011/03/25 13:27:20  Calibrating this product For optimum performance, you must calibrate this product to align the screen cursor with the position of the pen on the display screen. This is required to compensate for the viewing angle, and to adjust for parallax. Set this product in its working position, then follow the procedure below.  Open the pen tablet's control panel. See page 8. 2 Click the [Position Adjustment] tab.  Click [Calibrate...]. DTH-2400.indd 82011/03/25 13:27:20  4 In the order of () > (2) > () > (4) from the top-left, click the center of the cross marks on the screen with the pen. The position adjustment is completed when the cross marks disappear. When using Windows, click [OK] (or [Save]) and close the control panel after saving the adjustment contents. • • DTH-2400.indd 92011/03/25 13:27:21 10 Changing the angle of this product Use the lever to tilt the display forward. Use the lever to tilt the display backwards. The angle of the display can be changed with either the upper or lower lever. DTH-2400.indd 102011/03/25 13:27:21  Adjusting this product to a comfortable position This product can be used nearly flat on your work surface. This product can be lowered off the edge of a desk or table and used above your lap for intensive creative work. See page 4 for details. DTH-2400.indd 112011/03/25 13:27:21 1 Flip down feet on bottom edge to allow keyboard placement beneath. This product can be used vertically upright as a display. DTH-2400.indd 122011/03/25 13:27:21  Setting up this product to be positioned above your lap  Put the display into a fl…

Text truncated - open the document above for the full version.

 隨附配件 並非所有型號均附帶配件。 請核對產品包裝上的清單。 請參閱使用手冊來更換筆尖和個人化數位筆。 如需關於安裝 VESA 安裝座的資訊，請參閱使用手冊。 DTH-2400.indd 442011/03/25 13:27:25 4 連接液晶數位板  關閉電腦電源。 2 將 DVI-D 纜線或 DisplayPort 纜線連接至電腦上對應的連接頭。 請注意：DisplayPort 纜線隨附在腳座內。 如需說明，請參閱下列頁面。 亦可用隨附的 DVI-I 轉 VGA 纜線進行連接。 如需詳細資訊，請參閱使用手冊。 DTH-2400.indd 452011/03/25 13:27:25  若使用 DisplayPort 纜線，請依圖所示，將其從腳座取下。  將 USB 連接頭插入電腦或連接至電腦的 USB 集線器上的可用 USB 埠。 DTH-2400.indd 462011/03/25 13:27:25 4 4 將電源線插入電源變壓器，再插入 AC 電源插座。 DTH-2400.indd 472011/03/25 13:27:25   開啟液晶數位板。 電源指示燈從橙色變為藍色。 6 開啟電腦電源。 如果連接了 DVI-I 轉 VGA 纜線，請按照顯示器的顯示調整色彩解析度及尺寸設定。 然後，開啟選單螢幕，選擇 [螢幕設定] > [自動調整]。 如需關於開啟選單螢幕的資訊，請參閱使用手冊。 DTH-2400.indd 482011/03/25 13:27:25 4 安裝數位板驅動程式 請儲存您的工作並關閉所有開啟的應用程式。  插入本產品的安裝 CD。 若未自動顯示軟體安裝程式選單，請按兩下 CD 上的 [安裝] 圖示。 2 在顯示的對話方塊中，按一下 [安裝數位板]，然後根據提示操作。 安裝了驅動程式軟體後，使用手冊會下載到電腦。 按一下對話方塊中的 [重要產品資訊] 以檢視本產品的重要產品資訊。 其中包括產品安全注意事項、規格及其他重要資訊。 DTH-2400.indd 492011/03/25 13:27:25 50 校正液晶數位板 為獲得最佳效能，您必須校正液晶數位板，讓螢幕游標與顯示器螢幕上的數位筆位置對齊。 若要調整視差，就必須進行此動作。 請將液晶數位板放 在工作位置，然後依照以下程序進行。  開啟數位板控制台。 請參閱第 8 頁。 2 按一下 [位置調整] 標籤。  按一下 [校正...]。 DTH-2400.indd 502011/03/25 13:27:25  4 從左上角按照 () > (2) > () > (4) 的順序，用數位筆按一下螢幕上十字標記的中心。 十字標記消失後，位置調整完成。 使用 Windows 系統時，按一下 [確定]（或 [儲存]），在儲存調整內容後關閉控制台。 • • DTH-2400.indd 512011/03/25 13:27:25 5 調整液晶數位板傾斜程度 用調整桿使數位板前傾。 用調整桿使數位板後傾。 可用上/下調整桿調整數位板的角度。 DTH-2400.indd 522011/03/25 13:27:25  將液晶數位板調整到適當位置 液晶數位板可調整到與工作面幾乎平行的角度。 液晶數位板可調整到低於桌面邊緣的位置，以便放在膝部上進行創作。 如需細節資訊，請參閱第 4 頁。 DTH-2400.indd 532011/03/25 13:27:25 5 將底緣的支腳向下折平，以便將鍵盤放在下方。 液晶數位板可當作顯示器（垂直擺放）來使用。 DTH-2400.indd 542011/03/25 13:27:25  將液晶數位板置於膝部上  將數位板置於水平位置。 DTH-2400.indd 552011/03/25 13:27:26 5 2 將數位板向前拉出桌面或直到數位板鎖定到位。 （數位板底座有橡膠墊片，供桌面固著以防滑動。）  必要時用傾斜桿調整角度。 DTH-2400.indd 562011/03/25 13:27:26  瞭解液晶數位板 . 傾斜桿 2. 觸控環 根據預設，觸控環在大多數圖形應用程式中用於縮放畫面，而在其他應 用程式中用於捲動畫面。 按下模式按鈕，在三種可自訂狀態之間切換。 . 快速鍵 用於模擬編輯器按鍵、鍵盤及其他常用功能。 4. OSD 按鈕 用於調整各種顯示器設定。 . 電源指示燈 6. 狀態指示燈 如需關於這些及其他功能的細節資訊，請參閱使用手冊。 4 2    6 DTH-2400.indd 572011/03/25 13:27:26 5 . 支撐腳 8. 電源開關 . VESA 安裝座孔 0. 電源線 . DVI 纜線 2. USB 纜線 . 腳座鎖定釋放桿 8    0  2 DTH-2400.indd 582011/03/25 13:27:26 使用替換安裝座或腳座 若您將在需要使用替換安裝座平台的安裝環境中使用液晶數位板，您可以從本產品取下可調整腳座，然後將 液晶數位板安裝到符合 VESA 標準的任何安裝座臂或腳座上。 需要 4 公釐寬、螺距為 0.7 公釐（一般的 M4）的安裝螺絲，而且螺絲長度公差須為 17 公釐。長度公差超過 17 公釐將會損壞液晶數位板的內部元件。 若要拔下可調整腳座，並將液晶數位板安裝到不同的裝設平台上： 1.關閉電腦與液晶數位板的電源。然後拔下本產品與電腦之間的所有纜線。 2.將軟布鋪在平坦的桌子上並將液晶數位板倒放於布上，以保護顯示器螢幕表面。 3.取下螺絲，抬起可調整腳座組件，使其脫離機身。 4.使用適合安裝平台的適當螺絲，將液晶數位板穩固地安裝到替換的安裝平台上。 5.並重新接上纜線。 注意 將液晶數位板安裝到替換安裝平台上時，請務必依照平台製造商提供之說明文件中的所有說明進行。若安裝不當， 產品可能掉落，導致產品損壞或人員受傷。  產品規格 一般規格 型號/品牌DTH-2400（代碼名稱：Osprey）數位筆及觸控機型 尺寸（寬 x 長 x 高）6. x 46.4 x 64 公釐（不含腳座） 重量機身：0.0 kg，數位板腳座：4.0 kg（未完成） 操作溫度及濕度溫度： ～  ° C，濕度：20% ～ 80 % RH（未凝結） 存放溫度及濕度 溫度：-0 ～ 60 ° C，濕度：20% ～ 0 % RH（未凝結） （最大存放濕度在溫度 60 ° C 時為 8 %，最大存放溫度在濕度 0 % 時為 42 ° C） 證書與規範 VCCI Class B, FCC Part Subpart B(class B) and C, CE, KCC, BSMI, C-tick CB, CCC, GOST-R, China RoHS, Korean RoHS, EU RoHS 相容性 Windows / Vista / Vista x64 / XP / XP x64 Mac OS X 0.4 或以上版本 腳座腳座樣式可以靈活調整。 介面纜線DisplayPort, DVI-D, DVI-A, USB 蓋板附 AG 薄膜的堅固玻璃（背面：ITO 濺鍍） 輸入電壓24 VDC 電源管理VESA DPMS 電源消耗（使用 AC 變壓器） 80 W（最大）（未完成） 2 W 或以下（睡眠模式）（未連接 USB）  W 或以下（關機模式） USB 集線器 上游： 下游：（內部；2，外部；） 每埠負載電流最大 0.A。 DTH-2400.indd 592011/03/25 13:27:26 0 顯示器 顯示器面板a-Si 主動式矩陣 TFT LCD (h-IPS) 螢幕尺寸24. 英吋（8.4 x 24.0 公釐） 長寬比6:0 像素20 x 200 輸入視訊接頭DisplayPort、DVI-I（2 針） 輸入視訊訊號 DisplayPort 符合 V.a 標準，適用於 HDCP DVI .0 規範 類比 RGB 輸出視訊接頭 無視訊輸出 輸出視訊訊號 支援的解析度20 x 200、600 x 200、280 x 024、024 x 68、800 x 600、640 x 480 像素 白畫面均勻度 %（最小） 像素點間距0.20（水平）x 0.20（垂直）公釐 檢視角度 @ CR>0（水平/垂直）8(8/8) / 8(8/8)（標準） 顯示色彩,0,4,824 色（視所用的顯示卡而定。） 對比00:（標準）（未完成） 亮度220 cd/m 2 （標準）（未完成） 回應時間（Tr+Tf） 毫秒（標準） OSD 手動控制視 NEC-DS "PA24" 而定 隨插即用DDC 2B, DDC/CI LCD 品質 每片 LCD 面板均以非常嚴格的品質標準生產製造。但生產技術無法保證 TFT 顯示器絕對完美無瑕。 Wacom 不允許面板上出現亮點或暗點。在色彩頻譜的某些部分允許少許像素顯示錯誤。這並不代表顯示器故障。 DTH-2400.indd 602011/03/25 13:27:26 6 數位板 讀取技術電磁共振技術 工作區8.4 x 24.0 公釐 解析度0.00 公釐/點（080 lpi） 精確度 ± 0. 公釐（中央）、邊緣區 （從顯示區邊緣算起 20 公釐） ± 2.0 公釐，邊緣區 2（從顯示區邊緣算起  公釐） ± 4.0 公釐 讀取高度 公釐或以上（中央） 精確感應高度距蓋板 0 公釐 最大讀取速率 點/秒 數位筆最大傾斜範圍距垂直線 40 度（角落除外） 數位筆傾斜級數± 60 級 壓力感應級數2048 級 通訊介面USB 觸控筆KP-0E-0 觸控 技術類型投影電容式觸控技術 工作區8.4 x 24.0 公釐 解析度待定 坐標精度待定 最大讀取速率00 點/秒 電源變壓器 輸入電壓00 ～ 240 VAC、0/60 Hz 輸出電壓24 VDC、.0 A（最大） 壓感筆 KP-0E-0 筆尖運行軌跡最大 .0 公釐 壓力感應級數2048 級 橡皮擦端運行軌跡最大 2.0 公釐 外形尺寸（長 x 直徑）6. x 4. 公釐 重量 克，近似值 DTH-2400.indd 612011/03/25 13:27:26  自訂液晶數位板 開啟 Wacom 數位板控制台： Windows – 按一下 [開始]>> [程式集（所有程式）]>>[XXXX]>>[XXXX 屬性]。 Mac – 打開 [系統偏好] >> 選取 [XXXX]。 請參閱使用手冊來學習如何自訂快速鍵及輻射式選單，以增強產品性能。 註冊液晶數位板 支援選項 請核對使用手冊內的技術要點或故障排除。 請造訪：www.wacom.com/product support 請致電 Wacom 客戶服務中心：每週一至週四上午 :0 至下午 :00， 每週五上午 8:0 至下午 :00（太平洋時間），電話 60-86-8。（服務語言：英語） DTH-2400.indd 622011/03/25 13:27:26 6 产品使用注意事项 请为正确的笔和本产品安装驱动程序软件。 以下帮助和支持信息提供有关本产品的相关信息。 帮助和支持信息描述 用户手册PDF 文档 用户手册会在安装驱动程序软件时下载到您的电脑。 请参考用户手册以了解有用的信息（如更换电缆、使用 VESA 底座、疑难解答等等）。 重要的产品信息PDF 文档重要的产品信息包含于安装光盘中。其主要包括注意事项、产品规格以及其他重要信息。 快速入门指南 （本文档） 印制的文档快速入门指南提供本产品的一般概述，包括例如如何使用产品以及如何将其连接到电脑的信息。 • • DTH-2400.indd 632011/03/25 13:27:26  欢迎信息 尊敬的用户， 感谢您购买本款液晶数位板。 根据众多用户的反馈，本产品无论在其日常工作还是创意生活中都发挥了相当重要的作用。对于他们来说，本产品已经成为其工作生活的重要组成 部分。我们对您的信任深表感激，并将努力为您提供最佳的创作工具。 在将本款最新产品投放市场之前，我们进行了大量的市场调研工作并认真处理了反馈意见。例如，我们在之前产品型号的基础上增大了产品尺寸、 分辨率以及色域。 我们还注意到，有很大一部分用户常常会在一天中花费大量时间和精力辗转于多个项目之间力求完成限期的任务。其中就有一部分用户会因此而感 到身体不适。因此，我们对本款产品进行了工作定位的人体工程学设计，让用户能够更为灵活地使用本产品。我们的宗旨之一就是要为用户提供舒 适易用的产品。 在本款最新产品中，还包含了许多其他增强和改进内容。我们建议您阅读（或者快速浏览）本快速入门指南，以便充分利用本产品的各项功能。 我们祝愿您的各项创作事业圆满成功。 谨上 产品研发团队 DTH-2400.indd 642011/03/25 13:27:26 6 随附配件 并非所有型号都附带配件。请检查产品包装上的所列内容。 请参考用户手册更换笔尖和对笔进行个性化设置。 有关安装 VESA 底座的信息，请参考用户手册。 DTH-2400.indd 652011/03/25 13:27:26  连接产品  关闭电脑。 2 将 DVI-D 电缆或 DisplayPort 电缆连接到电脑上的对应接口。请注意，DisplayPort 电缆出厂时随附在基座内。有关说明请参考下一页。 也可以使用附带的 DVI-I 转 VGA 电缆进行连接。有关更多信息，请参考用户手册。 DTH-2400.indd 662011/03/25 13:27:26 6 使用 DisplayPort 电缆时，请如图所示将其从基座内取出。  将 USB 接头插入到电脑或连接至电脑的 USB 集线器上可用的 USB 端口。 DTH-2400.indd 672011/03/25 13:27:26  4 将电源线插入到电源适配器中，然后将其插入到 AC 插座中。 DTH-2400.indd 682011/03/25 13:27:26 6  打开本产品。电源指示灯将从橙色变为蓝色。 6 打开电脑。 如果连接了 DVI-I 转 VGA 电缆，观看显示器时…

Text truncated - open the document above for the full version.

Important Product Information Contents Contents 1 1 Precautions Product Specifications Disposal and Recycling Information Regulatory Statement License and Warranties Contents Contents 2 2 Cintiq ® 22HD (DTK-2200) Important Product Information Version 1.0 C3012 Copyright © Wacom Co., Ltd., 2012 All rights reserved. No part of this manual may be reproduced except for your express personal use. Wacom reserves the right to revise this publication without obligation to provide notification of such changes. Wacom does its best to provide current and accurate information in this manual. However, Wacom reserves the right to change any specifications and product configurations at its discretion, without prior notice and without obligation to include such changes in this manual. The above year indicates when this manual was prepared. However, the date of release to the users of the "manual" is simultaneous with the introduction into the market of the applicable Wacom product. Wacom and Cintiq are registered trademarks of Wacom Co., Ltd. Contents Contents 3 3 CONTENTS Precautions 4 Precautions on use and handling 4 Physical location 4 Environment 4 Usage 5 Handling 6 Cautions for the stand 9 Product Specifications 10 General specifications 10 Display 11 Pen tablet 12 Power adapter 12 Grip Pen 12 Disposal and Recycling Information 13 EU RoHS 13 Tu rk e y R o H S 1 3 EU disposal information (WEEE) 13 Regulatory Statement 14 FCC notice 14 Industry Canada (Canada only) 15 CE declaration 16 License and Warranties 17 Tablet driver software end user license agreement (Worldwide except for Europe, Africa and Middle East) 17 Tablet driver software end user license agreement (Europe, Middle East and Africa) 22 Limited warranty (U.S.A. and Canada) 27 Limited warranty (Central America, South America and the Caribbean) 29 Limited warranty (Europe, Africa and Middle East) 31 Contents Contents 4 4 PRECAUTIONS PRECAUTIONS ON USE AND HANDLING To ensure the safe operation of the Cintiq 22HD, be sure to follow all instructions, cautions, and warnings found within this manual. Failure to do so could cause damage to the Cintiq 22HD, damage to your computer, or loss of data. Failure to do so could also void your warranty, in which case Wacom shall have no responsibility to repair or replace the Cintiq. PHYSICAL LOCATION WARNING The Cintiq is solely applicable in normal office environments but may be used also as center consoles in climate controlled environments. The Cintiq was tested by Wacom for the usage in a normal office environment only and there was no particular inspection with regards to its compatibility in medical and military application areas. In addition, the interactive pen display is neither waterproofed nor explosion resistant. It serves and can be used solely as a passive display and input device. In all applications that are not designated for its sole usage, no information on the functionality and possible malfunctions of the interactive pen display can be supplied due to inadequate execution of tests. The adoption of the interactive pen display in other application areas than normal office environments is at the user’s risk. ENVIRONMENT CAUTION Temperature and humidity •Operating temperature and humidity: 5°C to 35°C, 20 % to 80 % RH •Storage temperature and humidity: -10°C to 60°C, 20 % to 90 % RH Do not use or store the Cintiq where: •Temperature changes are severe or exceed specifications (e.g. outdoors or inside a vehicle). •The pen display, the Grip Pen, and the Cintiq stand are exposed to direct sunlight or heat from an appliance, or are exposed to water or any other kind of liquid. Do not use the Cintiq in a dusty environment; this may damage it. Contents Contents 5 5 USAGE WARNING Only use a power adapter specified for use with the Cintiq. If a different type of power adapter is used, the Cintiq will not work properly or may be damaged. Using a different type of power adapter also has the potential to result in fire. Use of a different power adapter will void your warranty. Regularly remove dust build-up from the power plug. The addition of moisture, etc., to accumulated dust may create a fire hazard. Do not damage, forcibly bend, or bundle the power cord. Do not place heavy objects on the cord or expose it to excessive heat. Ignoring this warning may result in fire, electrical shock, or product failure. Do not connect or disconnect the power adapter with wet hands. Ignoring this warning may result in electrical shock or product malfunction. Do not insert foreign material into the USB port, video connector ports, or any other opening of the Cintiq. If a metal object or foreign material is inserted into a port or other opening of the Cintiq, it may cause product malfunction, fire, or electrical shock. CAUTION Use a grounded power source when applying power to the Cintiq. Do not connect or disconnect the video or power cables while the Cintiq or your computer is turned on; this may damage the display or computer video card. In this case, Wacom shall have no responsibility to repair or replace the product. The Cintiq is for use with a DVI or VGA video card. Using an inappropriate video card may damage the Cintiq. Do not block the rear panel ventilation holes; this may overheat and damage the Cintiq. When not using the Cintiq for long periods of time, unplug the power adapter from the AC outlet. Take care of the following points to protect the health of your eyes when using the Cintiq: •When using the Cintiq, only use it in a well lit room and view the display from a suitable distance. •Take regular breaks when using the Cintiq for extended periods of time. Contents Contents 6 6 Take care of the following points in regards to the LCD display. Do not push down forcibly with the pen on the LCD display. Pushing down forcibly on the display may cause ripple like striped patterns to temporarily appear on the display (the ripples disappear when you stop pushing down with the pen). The following condit…

Text truncated - open the document above for the full version.

Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 EUT External photos Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [KP-501E] *Accessory Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [KP-300E] *Option [KP-400E] *Option Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [KP-701E] *Option

Label Location Label Bottom side

Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 EUT Internal photos [Back cover] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [Back side-1] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [Back side-2] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [Back side-3] [Power SW PWB] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [Power SW PWB] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [Function KEY PWB (R)] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [Function KEY PWB (R)] [TOUCH RING PWB (R)] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [TOUCH RING PWB (R)] [TOUCH STRIP PWB] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [TOUCH STRIP PWB] [CONTROL PWB] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [CONTROL PWB] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [MAIN PWB-1] *Tx Control Board Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [MAIN PWB-2] *Tx Control Board Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [TOUCH CONTROL PWB] [TOUCH CONTROL PWB] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [TOUCH CONTROL PWB] [T-CON PWB] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [T-CON PWB] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [LED DRIVER PWB] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [LED DRIVER PWB] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [USB PWB] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [USB PWB] [DC JACK PWB] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [DC JACK PWB] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [DCDC PWB] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [DCDC PWB] [SENSOR CONTROL PWB] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [SENSOR CONTROL PWB] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [FUNCTION KEY PWB (L)] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [FUNCTION KEY PWB (L)] [TOUCH RING PWB (L)] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [TOUCH RING PWB (L)] [USB DOWN PWB] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [USB DOWN PWB] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [FAN (R)] [FAN (L)] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [SENSOR PWB, BACK LIGHT SENSOR PWB] [BACK LIGHT SENSOR PWB] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [BACK LIGHT SENSOR PWB] Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [SENSOR PWB] *Antenna part Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 [LCD Sheet metal frame]

Report number: Z071C-11340 Page 2 of 28 ZACTA Technology Corp. FCC ID: HV4DTH2400 FCC 15C Rev.4.0 IC Certification Number: 6888A-DTH2400 Table of contents Page 1. Summary of Test .................................................................................................................................................................. 4 1.1 Purpose of test .......................................................................................................................................................................... 4 1.2 Standards .................................................................................................................................................................................. 4 1.3 Summary of test results ........................................................................................................................................................... 4 1.4 Deviation from the standard .................................................................................................................................................... 4 1.5 Modification to the EUT by laboratory .................................................................................................................................. 4 2. Equipment description ......................................................................................................................................................... 5 2.1 General Description of equipment .......................................................................................................................................... 5 2.2 EUT information ...................................................................................................................................................................... 5 2.3 Operating mode ....................................................................................................................................................................... 5 2.4 Description of Test modes ....................................................................................................................................................... 5 3. Configuration information................................................................................................................................................... 6 3.1 EUT and Peripheral(s) used .................................................................................................................................................... 6 3.2 Cable(s) information ................................................................................................................................................................ 7 3.3 System configuration ............................................................................................................................................................... 8 4. Test Type and Results .......................................................................................................................................................... 9 4.1 99% Occupied Bandwidth ...................................................................................................................................................... 9 4.1.1 Test Procedure [ IC RSS-Gen 4.6.1 ] ............................................................................................................................. 9 4.1.2 Measurement Setup ........................................................................................................................................................... 9 4.1.3 Limit of Bandwidth at 99% Occupied Bandwidth ........................................................................................................... 9 4.1.4 Measurement Result ........................................................................................................................................................ 10 4.1.5 Trace Data ....................................................................................................................................................................... 10 4.2 Radiated Emissions (9kHz to 30MHz) ................................................................................................................................. 11 4.2.1 Test Procedure [ FCC 15.209, IC RSS-210 A2.2, RSS-Gen 4.9, 4.10, 4.11 ] ............................................................ 11 4.2.2 Measurement Setup ......................................................................................................................................................... 11 4.2.3 Limit of Spurious Emission Measurement ..................................................................................................................... 12 4.2.4 Calculation Method ......................................................................................................................................................... 12 4.2.5 Measurement Results ...................................................................................................................................................... 12 4.3 Radiated Emissions (30MHz to 1000MHz) ........................................................................................................................ 15 4.3.1 Test Procedure [ FCC 15.209, IC RSS-210 A2.2, RSS-Gen 4.9, 4.10, 4.11 ] ............................................................ 15 4.3.2 Measurement Setup ......................................................................................................................................................... 15 4.3.3 Limit of Spurious Emission Measurement ..................................................................................................................... 16 4.3.4 Calculation Method .........................................................................................................................…

Text truncated - open the document above for the full version.

Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 1 / 3 Radiated Emission (9kHz - 30MHz) [3m Semi-anechoic chamber] The photographs show maximized emission configuration. Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 2 / 3 Radiated Emission (30MHz - 1GHz) [10m Semi-anechoic chamber] The photographs show maximized emission configuration. Wacom Co., Ltd. FCC ID: HV4DTH2400 IC: 6888A-DTH2400 3 / 3 Conducted Emission at mains port [10m Semi-anechoic chamber] The photographs show maximized emission configuration.