HV4WKT400Bluetooth Keyboard

Wireless Bluetooth Keyboard Quick start guide Quick start guide Quick start guide Quick start guide Quick start guide Quick start guide Quick start guide Quick start guide EN DE FR IT ES JP KR SC EN Thank you for buying a Wacom Wireless Bluetooth keyboard. Please follow the instructions in this guide to ensure trouble free operation. QSG Keyboard view (Hot keys function) Activate default search function Forward Backward Go to Internet Increase volume Decrease volume Mute the sound Go to previous track Stop Battery indicator Play/Pause Connector indicator Go to next track EN Recharging the battery 1 The USB cable is for charging the onboard battery only. 2 Red LED Battery low: The red LED fl ashes slowly. Charging: The red LED fl ashes quickly. Fully charged: The red LED goes off. 3 ONOFF ONOFF Pairing the keyboard in Windows 8 1 Turn on your computer/tablet. Power button 2 Ensure Bluetooth is enabled - From the Start screen open the Charms bar, touch Settings, touch Change PC Settings, and touch Wireless. Turn on Bluetooth if it is off. 3 Add the keyboard - From the Start screen open the Charms bar, touch Settings, touch PC Settings, touch Devices, and then touch Add a Device. Quickly go to step 4. EN 4 Press the pairing button on the back of the keyboard. ONOFF Power On: The blue LED fl ashes for few seconds. Pairing: The blue LED fl ashes for approximately 3 minutes. Searching: The blue LED lights up for few seconds. Blue LED 5 When the keyboard is found it will appear in a Windows dialog box. Touch to select it. 6 A pass code will appear. Enter the pass code on the keyboard and press ENTER. • Bluetooth devices require the pass code for pairing. Make sure the pass code is displayed on the screen automatically. Note that no information on how to get the pass code will be provided. • Note that for other versions of Windows and for Mac devices, follow the Bluetooth pairing procedure according to Microsoft and Apple instructions. The process will be similar. • Make sure keyboard battery is charged. Support options For USA, Canada, Central and South America Visit our web site at www.wacom.com/productsupport Call the Wacom Customer Care Center. Available in English, from 7:30 am to 5:00 pm Monday -Thursday, and 8:30 am to 5:00 pm Friday (Pacifi c Time) at 360-896-9833. For Europe Visit our web site at www.wacom.eu Technical Support is available from Monday – Friday 9:00 to 18:00 (Central European Time). United Kingdom: +44 (0) 207 744 0831 Contact form: http://www.wacom.eu/contact XX-XXXX Wireless Bluetooth ® Keyboard Important Product Information Wichtige Produktinformationen Belangrijke productinformatie Informations importantes sur le produit Importanti informazioni sul prodotto Información importante sobre el producto Важная информация о продукте Ważne informacje o produkcie 중요한 제품 정보 重要产品信息 EN DE FR IT ES NL JP KR SC PL RU EN PRECAUTIONS Safety Precautions Warnings If foreign objects such as metal shards or water get into this product, stop using the product immediately. Continuing to use the product under these circumstances could result in a fire or electric shock. If there is any abnormality with this product, such as the product overheating or emitting smoke or an unusual odor, immediately stop using the product and shut down any connected devices. Avoid burns, check very carefully that the product is not emitting heat and then contact Wacom Customer Care. Continuing to use the product under these circumstances could result in a fire or electric shock. Do not drop this product or subject it to impacts. If the product is damaged in any way, immediately stop using it and turn off the product. Then contact Wacom Customer Care. Continuing to use the product when it is damaged could result in a fire or electric shock. Do not attempt to disassemble, modify or repair this product yourself. Doing so could lead to a fire, electric shock or malfunction. It will also void the product warranty should a fault occur. Do not throw this product into a fire as the product could burst and cause a fire or injury. Cautions Do not place this product in any of the following locations: - In a location exposed to direct sunlight - In a location exposed to high temperatures - In a location that is humid or where condensation could occur - In a location that is not flat or that is subject to vibration - In a location exposed to strong magnetic fields, such as close to magnets - In a very dusty location This product is not constructed to be waterproof. Always use or store the product in locations that are not exposed to water or other fluids. Do not use this product with devices that could be seriously affected should this product malfunction. When disposing of this product, do so in accordance with your local laws and regulations. Cleaning the product If the product is soiled, wipe it clean with a soft-dry cloth. The using of volatile solvents such as thinners, benzene or alcohol could cause degeneration or discoloration. • • • • • • • • • Handling wireless devices Warnings Do not use this product close to devices that could seriously affect this product if they malfunction. In rare cases, it is possible for this product to be affected by external radio signals of the same frequency or signals from a mobile phone. In this event, the product may malfunction, its operation may be degraded, or it may stop working altogether. Do not use this product in locations where the use of radio signals is prohibited, such as in hospitals. There is a risk that the radio signals from this product could affect electronic devices or medical equipment (pacemakers, etc.). The use of the wireless keyboard on board an aircraft could jeopardize the safe operation of the aircraft and is prohibited under the Civil Aeronautics Law. Before boarding, turn the product off and do not use it while on board the aircraft. * Wacom accepts no liability whatsoever for any accidents or social damage arising from a fault in this product. ENVIRON…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3

FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. LABEL

Page 4 Page 5 Page 6 Page 7 Page 8 Page 9

Report No.: SA120523D02C 1 of 6 Report Format Version 5.0.0 Reference No.: 120523D02, 130704D19, 130705D06 RF EXPOSURE REPORT REPORT NO.: SA120523D02C MODEL NO.: WKT-400 FCC ID: HV4WKT400 RECEIVED: Jul. 5, 2013 TESTED: Jul. 7 ~ 8, 2013 ISSUED: Jul. 17, 2013 APPLICANT: Wacom Co., Ltd. ADDRESS: 2-510-1 Toyonodai, Kazo-shi, Saitama 349-1148 Japan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA120523D02C 2 of 6 Report Format Version 5.0.0 Reference No.: 120523D02, 130704D19, 130705D06 Table of Contents RELEASE CONTROL RECORD .............................................................................................. 3 1. CERTIFICATION ........................................................................................................... 4 2. EVALUATION RESULT ................................................................................................. 5 3. SAR TEST EXCLUSION THRESHOLDS ..................................................................... 6 4. CONCLUSION .............................................................................................................. 6 Report No.: SA120523D02C 3 of 6 Report Format Version 5.0.0 Reference No.: 120523D02, 130704D19, 130705D06 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA120523D02C Original release. Jul. 17, 2013 Report No.: SA120523D02C 4 of 6 Report Format Version 5.0.0 Reference No.: 120523D02, 130704D19, 130705D06 1. CERTIFICATION PRODUCT: Bluetooth keyboard BRAND: Wacom MODEL NO.: WKT-400 APPLICANT: Wacom Co., Ltd. TESTED: Jul. 7 ~ 8, 2013 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1093) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE:Jul. 17, 2013 ( Annie Chang / Supervisor ) APPROVED BY : , DATE:Jul. 17, 2013 ( Ken Liu / Senior Manager ) Report No.: SA120523D02C 5 of 6 Report Format Version 5.0.0 Reference No.: 120523D02, 130704D19, 130705D06 2. EVALUATION RESULT Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,16 where ¾ f(GHz) is the RF channel transmit frequency in GHz . ¾ Power and distance are rounded to the nearest mW and mm before calculation. ¾ The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. Report No.: SA120523D02C 6 of 6 Report Format Version 5.0.0 Reference No.: 120523D02, 130704D19, 130705D06 3. SAR TEST EXCLUSION THRESHOLDS Maximum measured transmitter power: Frequency (GHz) Max. Power (mW) Min. test separation distance (mm) SAR test exclusion calculation value (NOTE 2) 1-g SAR test exclusion thresholds Result 2.402 ~ 2.480 0.7 5 0.217 3 Pass NOTE: 1. The antenna type is …

Text truncated - open the document above for the full version.

Report No.: RF120523D02C 1 of 44 Report Format Version 5.0.0 Reference No.: 130704D19, 120523D02, 130705D06 FCC TEST REPORT REPORT NO.: RF120523D02C MODEL NO.: WKT-400 FCC ID: HV4WKT400 RECEIVED: Jul. 5, 2013 TESTED: Jul. 7 ~ 8, 2013 ISSUED: Jul. 17, 2013 APPLICANT: Wacom Co., Ltd. ADDRESS: 2-510-1 Toyonodai, Kazo-shi, Saitama 349-1148 Japan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF120523D02C 2 of 44 Report Format Version 5.0.0 Reference No.: 130704D19, 120523D02, 130705D06 Table of Contents RELEASE CONTROL RECORD ................................................................................. 4 1. CERTIFICATION ............................................................................................... 5 2. SUMMARY OF TEST RESULTS ...................................................................... 6 2.1 MEASUREMENT UNCERTAINTY .................................................................... 6 3. GENERAL INFORMATION ............................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ................................................................. 7 3.2 DESCRIPTION OF TEST MODES ................................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .................... 9 3.3 DESCRIPTION OF SUPPORT UNITS ........................................................... 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ............................................. 11 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ................................. 12 4. TEST TYPES AND RESULTS ........................................................................ 13 4.1 CONDUCTED EMISSION MEASUREMENT .................................................. 25 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ............................... 25 4.1.2 TEST INSTRUMENTS .................................................................................... 25 4.1.3 TEST PROCEDURES .................................................................................... 26 4.1.4 DEVIATION FROM TEST STANDARD ........................................................... 26 4.1.5 TEST SETUP .................................................................................................. 27 4.1.6 EUT OPERATING CONDITIONS ................................................................... 27 4.1.7 TEST RESULTS ............................................................................................. 28 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT ......................... 13 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ....... 13 4.2.2 TEST INSTRUMENTS .................................................................................... 14 4.2.3 TEST PROCEDURES .................................................................................... 15 4.2.4 DEVIATION FROM TEST STANDARD ........................................................... 15 4.2.5 TEST SETUP .................................................................................................. 16 4.2.6 EUT OPERATING CONDITIONS ................................................................... 16 4.2.7 TEST RESULTS ............................................................................................. 17 4.3 NUMBER OF HOPPING FREQUENCY USED ............................................... 30 4.3.1 LIMIT OF HOPPING FREQUENCY USED ..................................................... 30 4.3.2 TEST SETUP .................................................................................................. 30 4.3.3 TEST INSTRUMENTS .................................................................................... 30 4.3.4 TEST PROCEDURES .................................................................................... 30 4.3.5 DEVIATION FROM TEST STANDARD ........................................................... 30 4.3.6 TEST RESULTS ............................................................................................. 30 4.4 DWELL TIME ON EACH CHANNEL ............................................................... 32 4.4.1 LIMIT OF DWELL TIME USED ....................................................................... 32 4.4.2 TEST SETUP .................................................................................................. 32 4.4.3 TEST INSTRUMENTS ............................................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST-MODE A 3 RADIATED EMISSION TEST-MODE B