HYQ12BZBElectronic Key

FCC ID: HYQ12BZB File No. T 18173-1-23 KG , Page 3 of 17 MIKES BABT PRODUCT SERVICE GmbH Ohmstrasse 2-4 94342 Strasskirchen Tel:+9424-9407-0 Fax:+9424-9407-60 Rev.No. 8.6 T E S T R E G U L A T I O N S The tests were performed according to following regulations : o - EN 50081-1 / 2.1991 o - EN 50081-2 / 7.1993 -------------------------------------------------------------------------------- o - EN 55011 / 3.1991 o - Group 1 o - Group 2 o - class A o - class B o - EN 55014 / 4.1993 o - Household appliances and similar o - tools o - Semiconductor devices o - EN 55014 / A2:1990 o - EN 55104 / 5.1995 Category: o - EN 55015 / A1:1990 o - EN 55015 / 12.1993 o - EN 55022 / 5.1995 o - class A o - class B o - prEN 55103-1/ 3.1995 o - prEN 50121-3-2 / 3.1995 o - EN 60601-1-2 / 4.1994 o - VCCI o - class 1 o - class 2 o - Part 15 Subpart C (15.209) !- Part 15 Subpart C (15.231) FCC ID: HYQ12BZB File No. T 18173-1-23 KG , Page 17 of 17 MIKES BABT PRODUCT SERVICE GmbH Ohmstrasse 2-4 94342 Strasskirchen Tel:+9424-9407-0 Fax:+9424-9407-60 Rev.No. 8.6 S U M M A R Y GENERAL REMARKS: The product 12BZB has been tested on the following frequency: TX-Mode: frequency 314 MHz The unit measurements mets also the bandwidth requirements. FINAL JUDGEMENT: The requirements according to the technical regulations and tested operation modes are ! - met. o - not met. The equipment under test ! - Fulfills the general approval requirements cited on page 3. o - Does not fulfill the general approval requirements cited on page 3. Date of receipt of test sample : accdg. to storage record_________________________ Testing Start Date : November 01, 1999_______________________ Testing End Date : November 02, 1999_______________________ - MIKES BABT PRODUCT SERVICE GmbH - Test-engineer _______________________________ _____________________________ Günter Mikes Klaus Gegenfurtner Dipl.-Ing.(FH) Dipl.-Ing (FH)

FCC ID: HYQ12BZB Attachment E1 File-No. T 18173-1-23 KG MIKES BABT PRODUCT SERVICE GmbH ! Ohmstrasse 2-4 ! D-94342 Strasskirchen ! Tel.:+49 94 24 94 07-0 ! Fax:+49 94 24 94 07-60 Rev.Nr. 8.5 Electronic Key 12BZB

Top of PCB – silver parts are not removable - component side with view of TX Top off with everything in place - inner case PCB solder side without battery PCB solder side with battery view of tx PCB solder side without battery and terminal view of tx PCB solder side without battery view of tx PCB with battery

RF exposure statement not needed for this unit.

FCC ID: HYQ12BZB TTI - P-G 009 / 98-00 TTI - P-G 089 / 94-50 File No. T 18173-1-23 KG , Page 1 of 17 MIKES BABT PRODUCT SERVICE GmbH Ohmstrasse 2-4 94342 Strasskirchen Tel:+9424-9407-0 Fax:+9424-9407-60 Rev.No. 8.6 E M I S S I O N -- T E S T R E P O R T Testreport file no. : T 18173-1-23 KG ______________ Date : February 19, 2001 of issue __________________ Model / Type No. : 12BZB ______________________________________________ Type : Electronic Key ______________________________________________ Applicant : DENSO CORPORATION ______________________________________________ Manufacturer : DENSO CORPORATION ______________________________________________ Licence holder : DENSO CORPORATION ______________________________________________ Address : 1-1, Showa-cho, Kariya-shi, Aichi-ken ______________________________________________ 448-8661 Japan ______________________________________________ Test result accrdg. to the regulation(s) at page 3 : POSITIVE This testreport with appendix consists of 30 pages. The testresult only responds to the tested sample. It is not allowed to copy this report even partly without the allowance of the testlaboratory. FCC ID: HYQ12BZB File No. T 18173-1-23 KG , Page 2 of 17 MIKES BABT PRODUCT SERVICE GmbH Ohmstrasse 2-4 94342 Strasskirchen Tel:+9424-9407-0 Fax:+9424-9407-60 Rev.No. 8.6 D I R E C T O R Y Page A) Documentation Directory2________ Testregulations3________ General information4-5________ Discovery of worst case condition 6________ Equipment under Test16________ Summary17________ B) Testdata Conducted emissions 10/150 kHz - 30 MHz 7________ Spurious emissions (magnetic field) 10 kHz - 30 MHz 8-9 ________ Spurious emissions (electric field) 30 MHz - 1000 MHz 10-11 ________ Spurious emissions (electric field) 1 GHz - 18 GHz 12-13 ________ Raiated power of the fundamental wave 14 ________ Conducted power of the fundamental wave measured on 15 the antenna terminals ________ Attachment A) Testdata / Bandwith plots A1-A4________ B) List of Test Equipment B1________ C) Photos of the test setup C1-C2________ D) Technical description of the test sample D1-D3 (e.g.CDF, Declaration) ________ E) Photos of the EuTE1-E3________ F) Measurement Protocol for FCC, VCCI and AUSTEL --________ FCC ID: HYQ12BZB File No. T 18173-1-23 KG , Page 3 of 17 MIKES BABT PRODUCT SERVICE GmbH Ohmstrasse 2-4 94342 Strasskirchen Tel:+9424-9407-0 Fax:+9424-9407-60 Rev.No. 8.6 T E S T R E G U L A T I O N S The tests were performed according to following regulations : o - EN 50081-1 / 2.1991 o - EN 50081-2 / 7.1993 -------------------------------------------------------------------------------- o - EN 55011 / 3.1991 o - Group 1 o - Group 2 o - class A o - class B o - EN 55014 / 4.1993 o - Household appliances and similar o - tools o - Semiconductor devices o - EN 55014 / A2:1990 o - EN 55104 / 5.1995 Category: o - EN 55015 / A1:1990 o - EN 55015 / 12.1993 o - EN 55022 / 5.1995 o - class A o - class B o - prEN 55103-1/ 3.1995 o - prEN 50121-3-2 / 3.1995 o - EN 60601-1-2 / 4.1994 o - VCCI o - class 1 o - class 2 o - Part 15 Subpart C (15.209) !- Part 15 Subpart C (15.231) FCC ID: HYQ12BZB File No. T 18173-1-23 KG , Page 4 of 17 MIKES BABT PRODUCT SERVICE GmbH Ohmstrasse 2-4 94342 Strasskirchen Tel:+9424-9407-0 Fax:+9424-9407-60 Rev.No. 8.6 A D D R E S S O F T H E T E S T L A B O R A T O R Y !-MIKES BABT PRODUCT SERVICE GmbH Ohmstrasse 2-4 D - 94342 Strasskirchen o - ______________________________________ ______________________________________ ______________________________________ E N V I R O N M E N T A L C O N D I T I O N S Temperature: 15-35 ° C______ Humidity 45-60 %______ Atmospheric pressure 860-1060 mbar_________ POWER SUPPLY SYSTEM UTILIZED Power supply system : Battery Unom = 3 V DC STATEMENT OF MEASUREMENT UNCERTAINTY The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities that can account for a nominal measurement error of ±4dB. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. The manufacturer has the sole responsibility of continued compliance of the device. SHORT DESCRIPTION OF THE EQUIPMENT UNDER TEST (EUT) The 314 MHz RF remote control system consists of a RF transmitter and a RF receiver. This transmitter is used mainly for locking or unlocking the doors of the vehicle. The transmitter send a radio wave signal while the button is pushed. The receiver becomes active in repsonse to the signal from the transmitter. The receiver is istalled inside the vehicle. Number of received/tested samples: 2 / 2 Serial Number: Prototype DEFINITIONS FOR SYMBOLS USED IN THIS TEST REPORT ! - Black box indicates that the listed condition, standard or equipment is applicable for this Report. o - Blank box indicates that the listed condition, standard or equipment was not applicable for this Report. FCC ID: HYQ12BZB File No. T 18173-1-23 KG , Page 5 of 17 MIKES BABT PRODUCT SERVICE GmbH Ohmstrasse 2-4 94342 Strasskirchen Tel:+9424-9407-0 Fax:+9424-9407-60 Rev.No. 8.6 M E A S U R E M E N T P R O T O C O L F O R F C C , V C C I A N D A U S T E L Test Methodology Conducted and radiated emission testing is performed according to the procedures in International Special Committee on Radio Interference (CISPR) Publication 22 (1993), European Standard EN 55022 and Australian Standard AS 3548 (which are based on CISPR 22). The Japanese standard, "Voluntary Control Council for Interference (VCCI) by Data Processing Equipment and Electronic Office Machines, Technical Requirements" is technically equivalent to CISPR 22 (1993). For official compliance, a conformance report must be sent to and accepted by the VCCI. In compliance with FCC Docket 92-152, "Harmonization of Rules for Digital Devices Incorporate International Standards", testing for FCC compliance may be done following the ANSI C63.4-1992 procedures and using the…

Text truncated - open the document above for the full version.

FCC ID: HYQ12BZB File No. T 18173-1-23 KG , Page C 1 of C 2 MIKES BABT PRODUCT SERVICE GmbH " Ohmstrasse 2-4 " D-94342 Strasskirchen " Tel.:+49 94 24 94 07-0 " Fax:+49 94 24 94 07-60 Rev.Nr. 8.6 Test-Setup: SPURIOUS EMISSIONS (electric field) 30 MHz - 1000 MHz FCC ID: HYQ12BZB File No. T 18173-1-23 KG , Page C 2 of C 2 MIKES BABT PRODUCT SERVICE GmbH " Ohmstrasse 2-4 " D-94342 Strasskirchen " Tel.:+49 94 24 94 07-0 " Fax:+49 94 24 94 07-60 Rev.Nr. 8.6 Test-Setup: SPURIOUS EMISSIONS (electric field) 1 GHz - 18 GHz