
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Manual Requirement of FCC / IC Our product (14AHC) is one of vehicle parts. Therefore, we will not supply the user’s manual. However, we will ask the vehicle manufacturer to include following statements in the vehicle user’s manual in accordance with FCC and IC requirements. 1. Requirement for User Manual 1.1. FCC Requirement 1.1.1. In accordance with 15.21 of FCC rule, following statement will be included in the user’s manual. 1.1.2. In accordance with requirement of FCC§15.19(a) (5), following statement will be included in the user’s manual. 1.2. IC Requirement 1.2.1. In accordance with requirement of RSS-GEN, following statement will be included in the user’s manual. FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
1-1, Showa-cho, Kariya-shi, Aichi-ken, 448-8661, Japan Tel : +81-566-25-5947 Fax : +81-566-25-4548 Letter Of Agency Date: June 21, 2013 UL Japan, Inc. 4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan FCC ID: HYQ14AHC To Whom It May Concern: Please be advised DENSO CORPORATION authorizes Yoshinobu Asai of Application Section, WiSE Japan, UL Verification Service, UL Japan, Inc. to act on our behalf, until otherwise notified, for applications submitted for Federal Communication Commission Radio equipment applications submitted to UL Japan, Inc. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. The application for the subject equipment has not been submitted to another TCB for certification. Thank you for your attention to this matter. Sincerely, Kazuo Sakakibara Manager Engineering Development Promotion Div. DENSO CORPORATION
1-1, Showa-cho, Kariya-shi, Aichi-ken, 448-8661, Japan Tel : +81-566-25-5947 Fax : +81-566-25-4548 Request for Confidentiality Date: June 21, 2013 UL Japan, Inc. 4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan RE: Certification Application FCC ID: HYQ14AHC Please be advised that the following information is to be held confidential on behalf of DENSO CORPORATION, referring to the FCC rules 0.457 and 0.459: Schematic Diagram Block Diagram Parts List Theory of Operation The application contains technical information which DENSO CORPORATION deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, Kazuo Sakakibara Manager Engineering Development Promotion Div. DENSO CORPORATION
DENSO CORPORATION Electronic Key FCC ID: HYQ14AHC IC Number: 1551A-14AHC External Photos <Front View> NOTE: Mechanical Key is made by other manufacturer, and it is not a part of EUT. 4-Button type 3-Button type <Rear View (Common)>
7. Marking location and layout Note: Compliance statement of marking will not be changed. But marking layout, size and other indications may be changed. FCC ID: HYQ14AHC IC:1551A-14AHC Model: 14AHC DENSO Marking location 8
DENSO CORPORATION Electronic Key FCC ID: HYQ14AHC IC Number: 1551A-14AHC Internal Photos <Component Side> <Solder Side (Common)> 4-Button type 3-Button type Antenna
Test report No. : 10024815H-A Page : 16 of 18 Issued date : July 4, 2013 FCC ID : HYQ14AHC UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 APPENDIX 3: Photographs of test setup Radiated emission Photo 1 Photo 2 Test report No. : 10024815H-A Page : 17 of 18 Issued date : July 4, 2013 FCC ID : HYQ14AHC UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 Worst case position Below 1GHz Horizontal: X-axis/Vertical : Y-axis Above 1GHz Horizontal: Z-axis/Vertical : Y-axis X-axis Y-axis Z-axis Test report No. : 10024815H-A Page : 18 of 18 Issued date : July 4, 2013 FCC ID : HYQ14AHC UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 Worst case position Mechanical Key (Not Inserted) worst case Mechanical Key (Inserted) End of Report
4383-326 Asama-cho, Ise-shi · Mie-ken · Japan
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 314.35 MHz - 314.35 MHz | - |
LiDsEYE
Equipment Class
JAB - Part 15 Class B Digital DeviceMillimeter Wave Radar Sensor
Equipment Class
VRD - Part 95 Vehicular Radar SystemsMillimeter Wave Radar Sensor
Equipment Class
VRD - Part 95 Vehicular Radar SystemsRemote Keyless Entry System and TPMS (Receiver)
Equipment Class
CYY - Communications Receiver used w/Pt 15 TransmitterMillimeter Wave Radar Sensor
Equipment Class
VRD - Part 95 Vehicular Radar Systems