Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Date: FCC ID: HYQ14CNA FRN: 0005820071 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Sincerely, US DENSO CORPORATION CFR 47 §2.911 (d)(5) Attestation DENSO CORPORATION (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. September 6, 2024 DENSO CORPORATION (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Engineering Development Promotion Div. Keijiro Kumagai Manager
Date: FCC ID: HYQ14CNA FRN:0005820071 To:Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA FCC US Agent Contact Person:Jodi Theut Company Name:DENSO INTERNATIONAL AMERICA, INC. Company Address:24777 Denso Drive, Southfield Michigan 48033 U.S.A. E‐mail:[email protected] FRN:0029286531 Sincerely, US Jodi Theut DENSO INTERNATIONAL AMERICA, INC. CFR 47 §2.911 (d)(7) FCC US Agent Letter of Attestation July 17, 2024 This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of DENSO CORPORATION (“the applicant”) for the above referenced FCC ID. We are aware of the requirements and responsibilities of the applicant’s agent for service of process as outlined in the FCC sectio n 2.911(d)(7) and Report and Order FCC 22‐84 paragraph 63.
Date: FCC ID: HYQ14CNA FRN:0005820071 To:Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA U.S. Agent Information: Contact Person:Jodi Theut Company Name:DENSO INTERNATIONAL AMERICA, INC. Company Address:24777 Denso Drive, Southfield Michigan 48033 U.S.A. E‐mail:[email protected] FRN:0029286531 Sincerely, US Engineering Development Promotion Div. DENSO CORPORATION CFR 47 §2.911 (d)(7) Agent Designation Attestation July 17, 2024 DENSO CORPORATION (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission‐related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. Keijiro Kumagai Manager
Date: UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC IC: Applicant: To whom it may concern: Any and all acts carried out by UL Japan, Inc. on our behalf shall have the same effect as acts of our own. Sincerely, US Engineering Development Promotion Div. DENSO CORPORATION Keijiro Kumagai Manager Letter of Authorization We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti‐Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. The application for the subject equipment has not been submitted to another TCB for certification. DENSO CORPORATION HYQ14CNA July 17, 2024 We, the undersigned, hereby authorize Rie Fujiwara of Consumer, Medical & Information Technologies Division, UL Japan, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters.
Date: UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC IC: Applicant: Sincerely, US Manager Engineering Development Promotion Div. DENSO CORPORATION Request for Confidentiality Schematic Diagram July 17, 2024 HYQ14CNA DENSO CORPORATION Please be advised that the following information is to be held confidential on behalf of DENSO CORPORATION referring to the FCC rules 0.457 and 0.459: Block Diagram Operational Description Parts List The application contains technical information which DENSO CORPORATION deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Keijiro Kumagai
Date: UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC IC: Applicant: Sincerely, Engineering Development Promotion Div. DENSO CORPORATION Keijiro Kumagai Manager Request for Short‐Term Confidentiality Internal Photos Test Setup Photos User Manual The application contains technical information which DENSO CORPORATION deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. July 17, 2024 HYQ14CNA DENSO CORPORATION Please be advised that the following information is to be held in confidence for 180 days from the date of the Grant of E quipment Authorization and behalf of us, referring to the FCC rules 0.457 and 0.459: External Photos
CONFIDENTIAL Product: Smart Card Key Model: 14CNA Marking location: Unit: mm Scale: free Note: Marking layout, size and other indications may be changed. The product is too small to place the label requirements. FCC compliance statement will be included in the user manual, as it is not practical to place on the device according to FCC Rules § 15.19. Label is affixed with an adhesive or laser-printed, and label will not peel off or rubbed off during the expected product life. FCC ID : HYQ14ABB IC : 1551A-14ABB DENSO FCC ID : HYQ14ABB IC : 1551A-14ABB DENSO (53) (79.4) FCC ID: HYQ14CNA
UL Japan, Inc. Ise EMC Lab 4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan T:: +81.596.24.8999 / F:: +81.596.24.8124 / W:: japan.ul.com September 3, 2024 FCC ID: HYQ14CNA To whom it may concern, We, UL Japan, Inc, hereby declare that Smart Card Key, model: 14CNA (FCC ID: HYQ14CNA) of DENSO CORPORATION is exempt from RF exposure SAR evaluation as its output power meets the exclusion limits stated in KDB 447498D01(v06). KDB 447498D01(v06) has the following exclusion for portable devices: The 1g and 10g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ꞏ[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where •f(GHz) is the RF channel transmit frequency in GHz •Power and distance are rounded to the nearest mW and mm before calculation •The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. This device has f = 0.43442 GHz and distance = 5 mm (minimum separation distance: 5 mm was used in the calculation) and the power consumption was 15.9 mW. So for this device: 15.9 mW[maximum average output power]/5 mm[minimum separation distance]*√0.43442 = 2.1 *This is less than 3.0, so no SAR is required. Even taking into account the tolerance, this device can be satisfied with the limits. Thank you for your attention to this matter. Shinichi Miyazono Leader
Date: UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC IC: Applicant: To whom it may concern: Sincerely, US FCC Justification statement about Antenna gain information July 17, 2024 HYQ14CNA DENSO CORPORATION Since this device is complied with FCC limits for fundamental and spurious emissions only by radiated measurements, antenna test report is not submitted in this application. Engineering Development Promotion Div. DENSO CORPORATION Keijiro Kumagai Manager
Test Report No. 15388555H Page 1 of 22 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 RADIO TEST REPORT Test Report No. 15388555H Customer DENSO CORPORATION Description of EUT Smart Card Key Model Number of EUT 14CNA FCC ID HYQ14CNA Test Regulation FCC Part 15 Subpart C Test Result Complied Issue Date September 3, 2024 Remarks - Representative test engineer Approved by Yuichiro Yamazaki Engineer Shinichi Miyazono Leader CERTIFICATE 5107.02 The testing in which "Non-accreditation" is displayed is outside the accreditation scopes in UL Japan, Inc. There is no testing item of "Non-accreditation". Report Cover Page - Form-ULID-003532 (DCS:13-EM-F0429) Issue# 23.0 Test Report No. 15388555H Page 2 of 22 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 ANNOUNCEMENT REVISION HISTORY Original Test Report No. 15388555H Revision Test Report No. Date Page Revised Contents - (Original) 15388555H September 3, 2024 - This test report shall not be reproduced in full or partial, without the written approval of UL Japan, Inc. The results in this report appl y only to the sample tested. (Laboratory was not involved in sampling.) This sample tested is in compliance with the limits of the above re gulation. The test results in this test report are traceable to the national or international standards. This test report must not be used by the customer to claim product certification, approval, or endorsement b y the A2LA accreditation body. This test report covers Radio technical requirements. It does not cover administrative issues such as Manual or non-Radio test related Requirements. (if applicable) The all test items in this test report are conducted b y UL Japan, Inc. Ise EMC Lab. The opinions and the interpretations to the result of the description in this report are outside scopes where UL Japan, Inc. has been accredited. The information provided b y the customer for this report is identified in SECTION 1. The laboratory is not responsible for information provided by the customer which can impact the validit y of the results. For test report (s) referred in this report, the latest version (including any revisions) is always referred. Test Report No. 15388555H Page 3 of 22 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 Reference: Abbreviations (Including words undescribed in this report) A2LA The American Association for Laboratory Accreditation ICES Interference-Causing Equipment Standard AC Alternating Current IEC International Electrotechnical Commission AFH Adaptive Frequency Hopping IEEE Institute of Electrical and Electronics Engineers AM Amplitude Modulation IF Intermediate Frequency Amp, AMP Amplifier ILAC International Laboratory Accreditation Conference ANSI American National Standards Institute ISED Innovation, Science and Economic Develo pment Canada Ant, ANT Antenna ISO International Organization for Standardization AP Access Point JAB Japan Accreditation Board ASK Amplitude Shift Keying LAN Local Area Network Atten., ATT Attenuator LIMS Laboratory Information Management System AV Average MCS Modulation and Coding Scheme BPSK Binary Phase-Shift Keying MRA Mutual Recognition Arrangement BR Bluetooth Basic Rate N/A Not Applicable BT Bluetooth NIST National Institute of Standards and Technology BT LE Bluetooth Low Energy NS No signal detect. BW BandWidth NSA Normalized Site Attenuation Cal Int Calibration Interval NVLAP National Voluntary Laboratory Accreditation Pro gram CCK Complementary Code Keying OBW Occupied Band Width Ch., CH Channel OFDM Orthogonal Frequency Division Multiplexing CISPR Comite International Special des Perturbations Radioelectri ques P/M Power meter CW Continuous Wave PCB Printed Circuit Board DBPSK Differential BPSK PER Packet Error Rate DC Direct Current PHY Physical Layer D-factor Distance factor PK Peak DFS Dynamic Frequency Selection PN Pseudo random Noise DQPSK Differential QPSK PRBS Pseudo-Random Bit Sequence DSSS Direct Sequence Spread Spectrum PSD Power Spectral Density EDR Enhanced Data Rate QAM Quadrature Amplitude Modulation EIRP, e.i.r.p. Equivalent Isotropically Radiated Power QP Quasi-Peak EMC ElectroMagnetic Compatibility QPSK Quadri-Phase Shift Keying EMI ElectroMagnetic Interference RBW Resolution Band Width EN European Norm RDS Radio Data System ERP, e.r.p. Effective Radiated Power RE Radio Equipment EU European Union RF Radio Frequency EUT Equipment Under Test RMS Root Mean Square Fac. Factor RSS Radio Standards Specifications FCC Federal Communications Commission Rx Receiving FHSS Frequency Hopping Spread Spectrum SA, S/A Spectrum Analyzer FM Frequency Modulation SG Signal Generator Freq. Frequency SVSWR Site-Voltage Standing Wave Ratio FSK Frequency Shift Keying TR Test Receiver GFSK Gaussian Frequency-Shift Keying Tx Transmitting GNSS Global Navigation Satellite System VBW Video BandWidth GPS Global Positioning System Vert. Vertical Hori. Horizontal WLAN Wireless LAN Test Report No. 15388555H Page 4 of 22 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 CONTENTS PAGE SECTION 1: Customer Information ......................................................................................... 5 SECTION 2: Equipment Under Test (EUT) .............................................................................. 5 SECTION 3: Test Specification, Procedures & Results ........................................................ 6 SECTION 4: Operation of EUT during testing ........................................................................ 9 SECTION 5: Radiated Spurious Emission ............................................................................ 10 SECTION 6: Automatically deactivate .................................................................................. 12 SECTION 7: -20 dB Bandwidth and 99% emission bandwidth ............…
Text truncated - open the document above for the full version.
4383-326 Asama-cho, Ise-shi · Mie-ken · Japan
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 2 | 15.231 | 434.42 MHz - 434.42 MHz | - |
LiDsEYE
Equipment Class
JAB - Part 15 Class B Digital DeviceMillimeter Wave Radar Sensor
Equipment Class
VRD - Part 95 Vehicular Radar SystemsMillimeter Wave Radar Sensor
Equipment Class
VRD - Part 95 Vehicular Radar SystemsRemote Keyless Entry System and TPMS (Receiver)
Equipment Class
CYY - Communications Receiver used w/Pt 15 TransmitterMillimeter Wave Radar Sensor
Equipment Class
VRD - Part 95 Vehicular Radar Systems