HYQDNMWR018Millimeter Wave Radar Sensor

Date: FCC ID: HYQDNMWR018 FRN:0005820071 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Sincerely, US DENSO CORPORATION CFR 47 §2.911 (d)(5) Attestation DENSO CORPORATION (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. 05/06/2024 DENSO CORPORATION (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Engineering Development Promotion Div. Keijiro Kumagai Manager

Date: FCC ID: HYQDNMWR018 FRN:0005820071 To:Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA FCC US Agent Contact Person:Jodi Theut Company Name:DENSO INTERNATIONAL AMERICA, INC. Company Address:24777 Denso Drive, Southfield Michigan 48033 U.S.A. E-mail:[email protected] FRN:0029286531 Sincerely, US Jodi Theut DENSO INTERNATIONAL AMERICA, INC. CFR 47 §2.911 (d)(7) FCC US Agent Letter of Attestation 05/06/2024 This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of DENSO CORPORATION (“the applicant”) for the above referenced FCC ID. We are aware of the requirements and responsibilities of the applicant’s agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63.

Date: FCC ID: HYQDNMWR018 FRN:0005820071 To:Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA U.S. Agent Information: Contact Person:Jodi Theut Company Name:DENSO INTERNATIONAL AMERICA, INC. Company Address:24777 Denso Drive, Southfield Michigan 48033 U.S.A. E‐mail:[email protected] FRN:0029286531 Sincerely, US Engineering Development Promotion Div. DENSO CORPORATION CFR 47 §2.911 (d)(7) Agent Designation Attestation 05/06/2024 DENSO CORPORATION (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission‐related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. Keijiro Kumagai Manager

Date: UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC IC: Applicant: To whom it may concern: Any and all acts carried out by UL Japan, Inc. on our behalf shall have the same effect as acts of our own. Sincerely, US Letter of Authorization We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti‐Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. The application for the subject equipment has not been submitted to another TCB for certification. DENSO CORPORATION HYQDNMWR018 05/06/2024 We, the undersigned, hereby authorize Rie Fujiwara of Consumer, Medical & Information Technologies Division, UL Japan, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Engineering Development Promotion Div. DENSO CORPORATION Keijiro Kumagai Manager

Date: UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC IC: Applicant: Sincerely, US Manager Engineering Development Promotion Div. DENSO CORPORATION Request for Confidentiality Schematic Diagram 05/06/2024 HYQDNMWR018 DENSO CORPORATION Please be advised that the following information is to be held confidential on behalf of DENSO CORPORATION referring to the FCC rules 0.457 and 0.459: Block Diagram Operational Description Parts List The application contains technical information which DENSO CORPORATION deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Keijiro Kumagai

Date: UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC IC: Applicant: Sincerely, Request for Short‐Term Confidentiality Internal Photos Test Setup Photos User Manual The application contains technical information which DENSO CORPORATION deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. 05/06/2024 HYQDNMWR018 DENSO CORPORATION Please be advised that the following information is to be held in confidence for 180 days from the date of the Grant of E quipment Authorization and behalf of us, referring to the FCC rules 0.457 and 0.459: External Photos Engineering Development Promotion Div. DENSO CORPORATION Keijiro Kumagai Manager

Product:Millimeter Wave Radar Sensor Model:DNMWR018 Marking location: Note: Marking layout, size and other indications may be changed Method of labeling: print a laser print on the product. Durability tests have confirmed that the label will not disappear within the product life.

UL Japan, Inc. Ise EMC Lab 4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan T:: +81.596.24.8999 / F:: +81.596.24.8124 / W:: japan.ul.com June 18, 2024 Statement for RF Exposure No. 15243568H Customer DENSO CORPORATION Description of EUT Millimeter Wave Radar Sensor Model Number of EUT DNMWR018 FCC ID HYQDNMWR018 Test standard FCC Part 95 Subpart M Test result Complied [FCC rule] §1.1310 Radiofrequency radiation exposure limits. The criteria listed in table 1 shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in §1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of §2.1093 of this chapter. Table 1—Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density Note 1 to Table 1: Occupational/controlled limits apply in situations in which persons are exposed as a consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. Limits for occupational/controlled exposure also apply in situations when an individual is transient through a location where occupational/controlled limits apply provided he or she is made aware of the potential for exposure. Note 2 to Table 1: General population/uncontrolled exposures apply in situations in which the general public may be exposed, or in which persons that are exposed as a consequence of their employment may not be fully aware of the potential for exposure or can not exercise control over their exposure. UL Japan, Inc. Ise EMC Lab 4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan T:: +81.596.24.8999 / F:: +81.596.24.8124 / W:: japan.ul.com [Results] <Mode 1> ModeAverageSeparation EIRPDistanceResultLimit [mW][cm] [mW/cm 2 ][mW/cm 2 ] Average Power334.2200.071 Calculating formula: Power Density = Average EIRP / (4 * Pi * Separation Distance ^ 2) Power Density <Mode 2> ModeAverageSeparation EIRPDistanceResultLimit [mW][cm] [mW/cm 2 ][mW/cm 2 ] Average Power82.4200.021 Calculating formula: Power Density = Average EIRP / (4 * Pi * Separation Distance ^ 2) Power Density Ryota Yamanaka Engineer

Test Report No. 15243568H-A-R1 Page 1 of 55 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 RADIO TEST REPORT Test Report No. 15243568H-A-R1 Customer DENSO CORPORATION Description of EUT Millimeter Wave Radar Sensor Model Number of EUT DNMWR018 FCC ID HYQDNMWR018 Test Regulation FCC Part 95 Subpart M Test Result Complied Issue Date July 4, 2024 Remarks - Representative test engineer Approved by Junki Nagatomi Engineer Ryota Yamanaka Engineer CERTIFICATE 5107.02 The testing in which "Non-accreditation" is displayed is outside the accreditation scopes in UL Japan, Inc. There is no testing item of "Non-accreditation". Report Cover Page - Form-ULID-003532 (DCS:13-EM-F0429) Issue# 23.0 Test Report No. 15243568H-A-R1 Page 2 of 55 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 ANNOUNCEMENT REVISION HISTORY Original Test Report No.: 15243568H-A This report is a revised version of 15243568H- A. 15243568H-A is replaced with this report. Revision Test Report No. Date Page Revised Contents - (Original) 15243568H-A June 18, 2024 - 1 15243568H-A-R1 July 4, 2024 Addition of the Tx BIST description to Clause 4.1. 1 15243568H-A-R1 July 4, 2024 Deletion of the note under the Occupied bandwidth (Tx_BIST) data. (*Tx BIST ~ Mode 2.) 1 15243568H-A-R1 July 4, 2024 Correction of the note under the data for Radiated Power (Tx Mode 1, 2). 1 15243568H-A-R1 July 4, 2024 Correction of the FCM1 duty factor for Radiated Power (Tx Mode 2) data; from 5.16 to 5.02. 1 15243568H-A-R1 July 4, 2024 Correction of the following contents in Radiated Power (Tx BIST) data. - Change the Marker 2 for Remarks; from *2 to *1. - Correction of the note *1. 1 15243568H-A-R1 July 4, 2024 Correction of the CW section total time of Tx on time for Modulation characteristics (Tx (Mode 1) FCM 2; from 522.605 to 522.604. 1 15243568H-A-R1 July 4, 2024 Correction of the Tx On + Tx Off time for Modulation characteristics (Tx_BIST); from 50.003 to 50.000 1 15243568H-A-R1 July 4, 2024 Correction of the following value in Modulation characteristics (Tx (Mode 2) FCM 1 Low) data. - FCM1 section: from 15.236 to 15.235 - Total: from 15.235 to 15.728 - Duty factor: from 5.16 to 5.02 1 15243568H-A-R1 July 4, 2024 Correction of the Remarks for Frequency Stability data; from "minimum / maximum voltage" to "rated voltage"  This test report shall not be reproduced in full or partial, without the written approval of UL Japan, Inc.  The results in this report appl y only to the sample tested. (Laboratory was not involved in sampling.)  This sample tested is in compliance with the limits of the above re gulation.  The test results in this test report are traceable to the national or international standards.  This test report must not be used by the customer to claim product certification, approval, or endorsement b y the A2LA accreditation body.  This test report covers Radio technical requirements. It does not cover administrative issues such as Manual or non-Radio test related Requirements. (if applicable)  The all test items in this test report are conducted b y UL Japan, Inc. Ise EMC Lab.  The opinions and the interpretations to the result of the description in this report are outside scopes where UL Japan, Inc. has been accredited.  The information provided b y the customer for this report is identified in SECTION 1.  The laboratory is not responsible for information provided by the customer which can impact the validit y of the results.  For test report (s) referred in this report, the latest version (including any revisions) is always referred. Test Report No. 15243568H-A-R1 Page 3 of 55 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 Reference: Abbreviations (Including words undescribed in this report) A2LA The American Association for Laboratory Accreditation ICES Interference-Causing Equipment Standard AC Alternating Current IEC International Electrotechnical Commission AFH Adaptive Frequency Hopping IEEE Institute of Electrical and Electronics Engineers AM Amplitude Modulation IF Intermediate Frequency Amp, AMP Amplifier ILAC International Laboratory Accreditation Conference ANSI American National Standards Institute ISED Innovation, Science and Economic Development Canada Ant, ANT Antenna ISO International Organization for Standardization AP Access Point JAB Japan Accreditation Board ASK Amplitude Shift Keying LAN Local Area Network Atten., ATT Attenuator LIMS Laboratory Information Management System AV Average MCS Modulation and Coding Scheme BPSK Binary Phase-Shift Keying MRA Mutual Recognition Arrangement BR Bluetooth Basic Rate N/A Not Applicable BT Bluetooth NIST National Institute of Standards and Technology BT LE Bluetooth Low Energy NS No signal detect. BW BandWidth NSA Normalized Site Attenuation Cal Int Calibration Interval NVLAP National Voluntary Laboratory Accreditation Pro gram CCK Complementary Code Keying OBW Occupied Band Width Ch., CH Channel OFDM Orthogonal Frequency Division Multiplexing CISPR Comite International Special des Perturbations Radioelectriques P/M Power meter CW Continuous Wave PCB Printed Circuit Board DBPSK Differential BPSK PER Packet Error Rate DC Direct Current PHY Physical Layer D-factor Distance factor PK Peak DFS Dynamic Frequency Selection PN Pseudo random Noise DQPSK Differential QPSK PRBS Pseudo-Random Bit Sequence DSSS Direct Sequence Spread Spectrum PSD Power Spectral Density EDR Enhanced Data Rate QAM Quadrature Amplitude Modulation EIRP, e.i.r.p. Equivalent Isotropically Radiated Power QP Quasi-Peak EMC ElectroMagnetic Compatibility QPSK Quadri-Phase Shift Keying EMI ElectroMagnetic Interference RBW Resolution Band Width EN European Norm RDS Radio Data System ERP, e.r.p. Effective Radiated Power RE Radio Equipment EU European Union RF Radio Frequency EUT Equipment Under Test RMS Root Mean Square Fac. Factor RSS Radio Standards Specifications FC…

Text truncated - open the document above for the full version.