HYQU22B0Passive Entry Passive Start System (LF Transmitter)

Manual Requirement of FCC / IC Our product (U22B0) is one of vehicle parts. Therefore, we will not supply the user’s manual. However, we will ask the vehicle manufacturer to include following statements in the vehicle user’s manual in accordance with FCC and IC requirements. 1. Requirement for User Manual 1.1. FCC Requirement 1.1.1. In accordance with 15.21 of FCC rule, following statement will be included in the user’s manual. 1.1.2. In accordance with requirement of FCC§15.19(a)(3), following statement will be included in the user’s manual. 1.2. IC Requirement 1.2.1. In accordance with requirement of RSS-GEN, following statement will be included in the user’s manual. FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

1-1, Showa-cho, Kariya-shi, Aichi-ken, 448-8661, Japan Tel : +81-566-25-5947 Fax : +81-566-25-4548 December 9, 2014 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Reference: Applicant: DENSO CORPORATION FCC ID: HYQU22B0 To Whom It May Concern: We, the undersigned, hereby authorize Yoshihisa Maeda of Consumer Technology Division, UL Japan, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Japan, Inc. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. The application for the subject equipment has not been submitted to another TCB for certification. Sincerely Yours, Keiji Nagura General Manager Engineering Development Promotion Div. DENSO CORPORATION

1-1, Showa-cho, Kariya-shi, Aichi-ken, 448-8661, Japan Tel : +81-566-25-5947 Fax : +81-566-25-4548 December 9, 2014 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Subject: Request for Confidentiality FCC ID: HYQU22B0 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Parts List Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, photos, user manual, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, Keiji Nagura General Manager Engineering Development Promotion Div. DENSO CORPORATION

DENSO CORPORATION Passive Entry Passive Start System (LF Transmitter) FCC ID: HYQU22B0 IC Number: 1551A-U22B0 External Photos (UPE) 1/3 Front Note: Other indication may be added. Rear DENSO CORPORATION Passive Entry Passive Start System (LF Transmitter) FCC ID: HYQU22B0 IC Number: 1551A-U22B0 External Photos (UPE) 2/3 Top Bottom DENSO CORPORATION Passive Entry Passive Start System (LF Transmitter) FCC ID: HYQU22B0 IC Number: 1551A-U22B0 External Photos (UPE) 3/3 Right Left

DENSO CORPORATION Passive Entry Passive Start System (LF Transmitter) FCC ID: HYQU22B0 IC Number: 1551A-U22B0 External Photos (ANT1, ANT2) 1/2 Front Rear Note: “Hi-L” is equivalent with ANT1, ANT2, and ANT4. DENSO CORPORATION Passive Entry Passive Start System (LF Transmitter) FCC ID: HYQU22B0 IC Number: 1551A-U22B0 External Photos (ANT1, ANT2) 2/2 Top Bottom Right Left DENSO CORPORATION Passive Entry Passive Start System (LF Transmitter) FCC ID: HYQU22B0 IC Number: 1551A-U22B0 External Photos (ANT4) 1/2 Front Rear Note: “Hi-L” is equivalent with ANT1, ANT2, and ANT4. DENSO CORPORATION Passive Entry Passive Start System (LF Transmitter) FCC ID: HYQU22B0 IC Number: 1551A-U22B0 External Photos (ANT4) 2/2 Top Bottom Right Left DENSO CORPORATION Passive Entry Passive Start System (LF Transmitter) FCC ID: HYQU22B0 IC Number: 1551A-U22B0 External Photos (ANT3, ANT5) 1/2 Front Rear Note: “Normal-L” is equivalent with ANT3, ANT5, and ANT6. DENSO CORPORATION Passive Entry Passive Start System (LF Transmitter) FCC ID: HYQU22B0 IC Number: 1551A-U22B0 External Photos (ANT3, ANT5) 2/2 Top Bottom Right Left DENSO CORPORATION Passive Entry Passive Start System (LF Transmitter) FCC ID: HYQU22B0 IC Number: 1551A-U22B0 External Photos (ANT6) 1/2 Front Rear Note: “Normal-L” is equivalent with ANT3, ANT5, and ANT6. DENSO CORPORATION Passive Entry Passive Start System (LF Transmitter) FCC ID: HYQU22B0 IC Number: 1551A-U22B0 External Photos (ANT6) 2/2 Top Bottom Right Left DENSO CORPORATION Passive Entry Passive Start System (LF Transmitter) FCC ID: HYQU22B0 IC Number: 1551A-U22B0 Antenna Connection

10. Marking location and layout Fig. Marking location and layout of UPE Note: Compliance statement of marking will not be changed. But making layout, size and other indications maybe changed. Unit: mm 16

DENSO CORPORATION Passive Entry Passive Start System (LF Transmitter) FCC ID: HYQU22B0 IC Number: 1551A-U22B0 Internal Photos (UPE) Component Side Solder Side Receiving antenna

DENSO CORPORATION Passive Entry Passive Start System (LF Transmitter) FCC ID: HYQU22B0 IC Number: 1551A-U22B0 Internal Photos (ANT1, ANT2) Note: “Hi-L” is equivalent with ANT1, ANT2, and ANT4. DENSO CORPORATION Passive Entry Passive Start System (LF Transmitter) FCC ID: HYQU22B0 IC Number: 1551A-U22B0 Internal Photos (ANT4) Note: “Hi-L” is equivalent with ANT1, ANT2, and ANT4. DENSO CORPORATION Passive Entry Passive Start System (LF Transmitter) FCC ID: HYQU22B0 IC Number: 1551A-U22B0 Internal Photos (ANT3, ANT5) Note: “Normal-L” is equivalent with ANT3, ANT5, and ANT6. DENSO CORPORATION Passive Entry Passive Start System (LF Transmitter) FCC ID: HYQU22B0 IC Number: 1551A-U22B0 Internal Photos (ANT6) Note: “Normal-L” is equivalent with ANT3, ANT5, and ANT6.

Test report No. : 10291830H-B-R2 Page : 2 of 25 Issued date : December 1, 2014 Revised date : January 14, 2015 FCC ID : HYQU2NB0 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 REVISION HISTORY Original Test Report No.: 10291830H-B Revision Test report No. Date Page revised Contents - (Original) 10291830H-B December 1, 2014 - - 1 10291830H-B-R1 December 16, 2014 P. 13 Correction of Duty factor value of PK with Duty factor ; From -4.0 to -3.9 1 10291830H-B-R1 December 16, 2014 P. 14 Correction of Duty factor value of PK with Duty factor ; From -3.9 to -4.0 1 10291830H-B-R1 December 16, 2014 P. 8, 9, 13, 16, 19, 22, 26, 29 (for Original report) Deletion of configuration, data, and photo about Ant1. 2 10291830H-B-R2 January 14, 2015 P. 8 Correction of note. Test report No. : 10291830H-B-R2 Page : 3 of 25 Issued date : December 1, 2014 Revised date : January 14, 2015 FCC ID : HYQU2NB0 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 CONTENTS PAGE SECTION 1: Customer information ..................................................................................................... 4 SECTION 2: Equipment under test (E.U.T.) ........................................................................................ 4 SECTION 3: Test specification, procedures & results ........................................................................ 5 SECTION 4: Operation of E.U.T. during testing ................................................................................. 8 SECTION 5: Radiated emission (Fundamental and Spurious Emission) ........................................ 10 SECTION 6: -26dB Bandwidth ............................................................................................................ 12 SECTION 7: 99% Occupied Bandwidth ............................................................................................. 12 APPENDIX 1: Data of EMI test........................................................................................................... 13 Radiated Emission below 30MHz (Fundamental and Spurious Emission) ................................. 13 Radiated Emission above 30MHz (Spurious Emission) ................................................................. 15 Duty Cycle .......................................................................................................................................... 17 -26dB Bandwidth and 99% Occupied Bandwidth ......................................................................... 19 APPENDIX 2: Test instruments .......................................................................................................... 21 APPENDIX 3: Photographs of test setup ............................................................................................ 22 Radiated Emission ............................................................................................................................. 22 Worst Case Position .......................................................................................................................... 24 Test report No. : 10291830H-B-R2 Page : 4 of 25 Issued date : December 1, 2014 Revised date : January 14, 2015 FCC ID : HYQU2NB0 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 SECTION 1: Customer information Company Name : DENSO CORPORATION Address : 1-1 Showa-cho, Kariya-shi, Aichi-ken, 448-8661 Japan Telephone Number : +81-566-61-5234 Facsimile Number : +81-566-25-4837 Contact Person : Akihiro Taguchi SECTION 2: Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of Equipment : Passive Entry Passive Start System (LF Transmitter) Model No. : U2NB0 Serial No. : Refer to Section 4, Clause 4.2 Receipt Date of Sample : April 24, 2014 Country of Mass-production : United states of America and China Condition of EUT : Production prototype (Not for Sale: This sample is equivalent to mass-produced items.) Modification of EUT : No Modification by the test lab 2.2 Product Description Model No: U2NB0 (referred to as the EUT in this report) is the Passive Entry Passive Start System (LF Transmitter). General Specification Clock frequency(ies) in the system : MPU: 4MHz Radio Specification [Transmitter part] Radio Type : LF Transmitter Frequency of Operation : 125kHz Oscillation circuit : Ceramic resonator Oscillator frequency : 8MHz Modulation : OOK Power Supply (inner) : DC 12.0V Antenna type : Ant1: External Antenna Ant2: External Antenna Ant3: External Antenna Ant4: External Antenna Ant5: External Antenna Ant6: External Antenna *The EUT does not transmit simultaneously from mutiple antennas. Antenna specification : Ferrite antenna coil Transmitting out put current : 50mA - 1000mA [End user cannot control output current since it is fixed depending on each system] Test report No. : 10291830H-B-R2 Page : 5 of 25 Issued date : December 1, 2014 Revised date : January 14, 2015 FCC ID : HYQU2NB0 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 SECTION 3: Test specification, procedures & results 3.1 Test Specification Test Specification : FCC Part 15 Subpart C: 2014, final revised on December 23, 2014 Title : FCC 47CFR Part15 Radio Frequency Device Subpart C Intentional Radiators Section 15.207 Conducted Emission Section 15.209 Radiated emission limits, general requirements * The revision on December 23, 2014 does not affect the test specification applied to the EUT. FCC 15.31 (e) This test was performed with the New Battery (DC 12V) and the constant voltage was supplied to this EUT during the tests. Therefore, this EUT complies with the requirement. FCC Part 15.203 Antenna requirement It is impossible for end users to replace the antenna, because t…

Text truncated - open the document above for the full version.

Test report No. : 10291830H-B-R2 Page : 22 of 25 Issued date : December 1, 2014 Revised date : January 14, 2015 FCC ID : HYQU2NB0 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 APPENDIX 3: Photographs of test setup Radiated Emission Ant3 Photo 1 Photo 2 Test report No. : 10291830H-B-R2 Page : 23 of 25 Issued date : December 1, 2014 Revised date : January 14, 2015 FCC ID : HYQU2NB0 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 Radiated Emission Ant4 Photo 1 Photo 2 Test report No. : 10291830H-B-R2 Page : 24 of 25 Issued date : December 1, 2014 Revised date : January 14, 2015 FCC ID : HYQU2NB0 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 Worst Case Position Below 30MHz: X-axis Above 30MHz: Hor: X-axis, Ver: X-axis UPE X-axis Y-axis Z-axis Test report No. : 10291830H-B-R2 Page : 25 of 25 Issued date : December 1, 2014 Revised date : January 14, 2015 FCC ID : HYQU2NB0 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 Worst Case Position Below 30MHz: Ant3: X-axis / Ant4: Z-axis Above 30MHz: Ant3: Hor: Z-axis, Ver: X-axis Ant4: Hor: X-axis, Ver: X-axis Ant3 Ant4 X-axis X-axis Y-axis Y-axis Z-axis Z-axis End of Report