HZB-L49U24U50Wireless Access Point

226 AP-4000 Series User Guide F Regulatory Compliance/Professional Installation NOTE:Please read this section before installing and using your product, and save these instructions. Visit http://support.proxim.com for the latest regulatory compliance information. This section contains important regulatory compliance and professional installation information for the following products: ProductModel Numbers ORiNOCO Tri-Mode Access Point AP-4000AP-AG-AT-02 8670-AU 8670-AU2 8670-BR 8670-CN 8670-EU 8670-EU2 8670-HK 8670-JP 8670-JP2 8670-SG 8670-SK 8670-TW 8670-UK 8670-US 8670-US2 ORiNOCO Tri-Mode Access Point AP-4000MAP-AG-AT-02 8670M-AU 8670M-AU2 8670M-BR 8670M-CN 8670M-EU 8670M-EU2 8670M-HK 8670M-JP 8670M-JP2 8670M-SG 8670M-SK 8670M-TW 8670M-UK 8670M-US 8670M-US2 ORiNOCO Quad-Mode Access Point AP-4900M 8670M-PS-US Regulatory Compliance/Professional InstallationAP-4000 Series User Guide 227 Please see the following sections for more information: •Safety Information (USA, Canada, & European Union) •Federal Communications Commission (FCC) Compliance •Professional Installation Regulatory Compliance/Professional InstallationAP-4000 Series User Guide Safety Information (USA, Canada, & European Union) 228 Safety Information (USA, Canada, & European Union) This product has been evaluated to, and complies with, the Safety requirements of UL60950:2000, and IEC60950:1999; the Standards for the Safety of Information Technology Equipment. When using this device, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: • Operate and install this product as described in this manual. This device must be installed and used in strict accordance with the manufacturer's instructions. • This product is suitable for installation in air handling spaces (plenum). • Use only the AC/DC power supply adapter provided. For replacement, contact your local supplier or distributor. • To avoid the risk of electric shock from lightning, do not use this product during an electrical storm. • Installation of this product must conform to local regulations and codes. • When using this product with an external antenna, see the installation documentation provided with the antenna system. • No user serviceable parts; all repairs and service must be handled by a qualified service center. Regulatory Compliance/Professional InstallationAP-4000 Series User Guide Federal Communications Commission (FCC) Compliance 229 Federal Communications Commission (FCC) Compliance This device operates at 2.4 GHz, 5.15 - 5.35 GHz, and 5.75 - 5.85 in compliance with Part 15 of the FCC Rules. In addition, the 8670M-PS-US model also operates at 4.9 GHz in compliance with Part 90 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. To comply with the FCC radio frequency exposure requirements, the following antenna installation and device operating configurations must be satisfied: • The 8670M-US2 model must be used indoors only and must be installed to provide a separation distance of at least 20 cm (8 inches) from all persons. • Product models using external antennas require professional installation. The antennas used for professional installation must be fixed-mounted on indoor/outdoor permanent structures with a separation distance of at least 100 cm from all persons. • Antennas must not be co-located and must not operate in conjunction with any other antenna or transmitter. See Professional Installation for antenna installation instructions, and Hardware Installation for cabling and mounting instructions. Modifications Changes or modifications to this device that are not expressly approved by the manufacturer of the product could void the user’s authority to operate the equipment. Warnings This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection again harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and the receiver • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician for help Regulatory Compliance/Professional InstallationAP-4000 Series User Guide Professional Installation 230 Professional Installation All products using external antennas must be professionally installed, and the transmit power of the system must be adjusted by the professional installers to ensure that the system EIRP is in compliance with the limit specified by the regulatory authority of the country of application. See the following sections for more information: •Installing External Antennas •Adjusting Tx Output Power •Antenna Types and Maximum Gain NOTE:See Hardware Installation for cabling and mounting instructions. Installing External Antennas Only a professional installer can install external antennas on the AP-4000/4000M/4900M. For information on the AP’s antenna functionality, see Antennas. Follow the mounting instructions included with your external antenna, and then connect the antenna cable to the AP, as follows: 1. Press down near the cente…

Text truncated - open the document above for the full version.

2115 O’Nel Drive, San Jose, CA 95131 Tel (408) 731 2700, Fax (408)731 3675 August 1, 2005 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: HZB- L49U24U50 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Parts List Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments: External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Caroline Yu Regulatory Compliance Manager Proxim

2115 O’Nel Drive, San Jose, CA 95131 Tel (408) 731 2700, Fax (408)731 3675 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To Whom It May Concern: We hereby declare that the product we are filing for FCC certification under HZB- L49U24U50 is of identical hardware platform as a prior approved product under FCC ID of IXMAPAGAT02. The HZB-L49U24U50’s operation and application at 2400-2483.5 MHz, 5150-5350 MHz and 5725-5850 MHz is identical to that of IXMAPAGAT02. In addition, the HZB-L49U24U50 also operates in the 4942.5 to 4987.5 MHz in compliance to Part 90. Caroline Yu Regulatory Compliance Manager Proxim Phone: 408 542 5323 Fax: 408 548 3889 Email: [email protected]

-----Original Message----- From: Caroline Yu [mailto:[email protected]] Sent: Friday, September 30, 2005 6:46 PM To: Roland Gubisch ES-Box Cc: Terre Wolak ES-Atl Subject: RE: TCB certification application FCC ID: HZB-L49U24U50 Roland: Please see my response to your questions in the following: Caroline Yu Regulatory Compliance Manager Proxim 2115 O'Nel Drive San Jose, CA USA, 95131 phone: +1 (408) 542-5323 fax: +1 (408) 548-3889 www.proxim.com -----Original Message----- From: Roland Gubisch ES-Box [mailto:[email protected]] Sent: Friday, September 30, 2005 1:48 PM To: Caroline Yu Cc: Terre Wolak ES-Atl Subject: TCB certification application FCC ID: HZB-L49U24U50 Dear Caroline, I received your voicemail message. Unfortunately the Grant cannot be issued immediately, but the issues that remain to be addressed are defined and are given below: ADMINISTRATIVE (1) The FCC ID on the Confidentiality request letter does not match the current application. Please revise and re-submit. Sorry for the oversight. Please see the attached corrected letter. <<Confidentiality.pdf>> (2) Please review and comment on the label art. The EUT is large compared with the FCC's criterion for absence of 15.19(a)(3) wording, even though the criterion is not precise. As we discussed over the phone, we'll not do the FCC info on the label, but rather put it in our manual. There has been a number of prior approvals with the same box size, so this approach should be fine. (3) The technical description refers to FCC ID IXM... and not the current number, nor does it appear to refer to 4.9 GHz operation. Is there a more relevant description of the device operation in this band? I'll re-draft this and send it to you in a separate email. (4) Use of the 4.9 GHz band must be related to Public Safety operations, see 90.1203(b) and 90.15. Is it appropriate do mention this in the User Guide? As we discussed over the phone, we'll market the product models with the 4.9GHz band transmitters only to the public safety customers, not to the general customers. So it should not be of a concern. We can add the info to our manual, nevertheless, at a later time. (5) Use of the 4.9 GHz band is subject to licensing, per 90.1207. Is it appropriate to mention this in the User Guide? Same as the response with number 4. (6) In order to complete a composite certification for the 2.4 GHz and 5 GHz Part 15 functions, we will need all of the exhibits previously submitted for the FCC ID: IXM... We have been unable to download these from the FCC website consistently. Please provide these exhibits, which I listed previously to you by email on 9-21-05. The exhibits for the 15C and 15E applications are identical, so only one set is needed. The documents I submitted on test reports from ADT is the entire report of the IXM application. The device is of identical hardware design and as a result the same schematics. The manual that I newly submitted includes all models, so it will overwrite the manual submission of the IXM application. TECHNICAL (1) Form 731 lists necessary bandwidths of 4.9, 10.8 and 23 MHz. Section 90.1215 specifies a largest channel of 20 MHz. Each of the emissions documented in the test report shows compliance with the respective 5, 10 and 20 MHz low-power masks. I suggest that the Form 731 emissions designators be amended to 5M00W7D, 10M0W7D and 20M0W7D. Do you agree? Yes. Thanks very much for your suggestion. Please help to make modification on the file I submitted to you on this. Thanks again! (2) Cannot find information per 2.1033(c)(8) DC voltage and current into final RF stage; please indicate where this is located, or provide. I'll provide you the needed info shortly afteerwords. (3) Cannot find information per 2.1033(c)(9) tune-up procedure; please indicate where this is located, or provide. In the user's manual, channel and power selection methods are provided in detail. As a result, I didn't submit a separate document (4) Spurious radiated emissions per 2.1053 must be measured by the substitution method in TIA-603-B, for each emission within 20 dB of the regulatory limit. A limit of -40 dBc corresponds to 18.5-40 = -21.5 dBm. This is 76 dBuV/m at 3m. Emissions higher than 56 dBuV/m must be re-measured by the substitution method. Please consult with the test laboratory on this to discuss and respond. I talked to Mike Heckrotte and his immediate answer after looking up the report is that he'd need to do added test. I've requested immediate action and update of the test report, and I'll send you the final report ASAP. Certification can proceed when these issues have been addressed. Thank you, Roland

Product Description The HZB-L49S24S50 device is a 802.11abg tri-mode access point product. The device supports 802.11b/g and 802.11a protocol simultaneously. It operates at 2.4GHz and either 4.9GHz or 5GHz band, with dual-band transmission capability. The product is offered with integrated antennas, or external antennas of various types. Testing on each types of antenna that may potentially be used have been done to be compliant. Instructions on system configuration and antenna installation with a list permissible antennas are detailed in the User’s Manuel under the regulatory section. External antennas must be professionally installed. 4.9 GHz band must be used only for public safety operations under licensing arrangement. For more detailed information, please reference the submitted user’s manual of the product.

2115 O’Nel Drive, San Jose, CA 95131 Tel (408) 731 2700, Fax (408)731 3675 September 22, 2005 To: TCB reviewer RE: RF exposure of HZB-L49U24U50 The HZB-L49U24U50 product is an 802.11abg access point device. The radio is capable of transmitting at 2.4-2.4835 GHz, 4.94-4.99 GHz, 5.15-5.35G, and 5.725-5.850GHz band individually, as well as transmitting with 2.4G and any one of the higher bands turned on at the same time. Based on report 05U3569-1B for 4.9G testing done by CCS, and the following RF exposure document for other bands done by ADT Corp, the worst case exposure at 20cm distance for integral antennas and at 100cm distance for external antennas is 0.1085 mW/cm 2 for 2.4G band, and 0.73 mW/cm 2 for the higer bands (4.94-4.99 GHz, 5.15-5.35 GHz, 5.725-5.850 GHz all taken into consideration) . As a result, the worst case exposure of the entire system under all conditions is within 0.8385 mW/cm 2 (0.1085+0.73). This overall worst case exposure level is within the limit of 1mW/cm 2 as specified in 1.1310 of CFR47, To ensure of compliance to 1.1310 based on the calculation results, we have included in the regulatory section of product manual warnings of 20cm separation distance for applications using integral antennas, and separation distance of 1m for applications using external antennas. The manual is on file in this application. If you should have any questions regarding this submission, please feel free to contact the undersigned. Yours truly, Caroline Yu Regulatory Compliance t Manager Proxim

FCC CFR47 PART 90 SUBPART Y CERTIFICATION TEST REPORT FOR 4.9 GHz ACCESS POINT MODEL NUMBER: ORiNOCO AP-4900 FCC ID: HZB-L49U24U50 REPORT NUMBER: 05U3569-1C ISSUE DATE: OCTOBER 3, 2005 Prepared for PROXIM 2115 O'NEL DRIVE SAN JOSE, CA 95131 USA Prepared by COMPLIANCE ENGINEERING SERVICES, INC. d.b.a. COMPLIANCE CERTIFICATION SERVICES 561F MONTEREY ROAD, MORGAN HILL, CA 95037, USA TEL: (408) 463-0885 FAX: (408) 463-0888 REPORT NO: 05U3569-1C DATE: OCTOBER 3, 2005 EUT: 4.9 GHz Access Point FCC ID: HZB-L49U24U50 Page 2 of 153 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. Revision History Rev. Issue Date Revisions Revised By A 9/13/05 Initial Issue MH B 9/19/05 Changed FCC ID to HZB-L49U24U50; Changed applicant’s address DZ C 10/3/05 Added Radiated substitution measurement data MH REPORT NO: 05U3569-1C DATE: OCTOBER 3, 2005 EUT: 4.9 GHz Access Point FCC ID: HZB-L49U24U50 Page 3 of 153 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS............................................................................................. 5 2. TEST METHODOLOGY .................................................................................................................. 6 3. FACILITIES AND ACCREDITATION .......................................................................................... 6 4. CALIBRATION AND UNCERTAINTY.......................................................................................... 6 4.1. MEASURING INSTRUMENT CALIBRATION............................................................................... 6 4.2. MEASUREMENT UNCERTAINTY................................................................................................ 6 5. EQUIPMENT UNDER TEST............................................................................................................7 5.1. DESCRIPTION OF EUT ............................................................................................................... 7 5.2. MAXIMUM OUTPUT POWER ...................................................................................................... 7 5.3. DESCRIPTION OF AVAILABLE ANTENNAS .............................................................................. 8 5.4. SOFTWARE AND FIRMWARE..................................................................................................... 8 5.5. WORST-CASE CONFIGURATION AND MODE .......................................................................... 8 5.6. DESCRIPTION OF TEST SETUP ................................................................................................ 8 6. TEST AND MEASUREMENT EQUIPMENT .............................................................................. 10 7. LIMITS AND RESULTS ................................................................................................................. 11 7.1. CHANNEL TESTS FOR 5 MHz CHANNEL BANDWIDTH MODE ............................................. 11 7.1.1. EMISSION BANDWIDTH ................................................................................................ 11 7.1.2. PEAK OUTPUT POWER .................................................................................................. 15 7.1.3. MAXIMUM PERMISSIBLE EXPOSURE ........................................................................ 26 7.1.4. AVERAGE POWER........................................................................................................... 29 7.1.5. PEAK POWER SPECTRAL DENSITY ............................................................................ 30 7.1.6. EMISSION MASK AND CONDUCTED SPURIOUS...................................................... 41 7.2. CHANNEL TESTS FOR 10 MHz CHANNEL BANDWIDTH MODE ........................................... 48 7.2.1. EMISSION BANDWIDTH ................................................................................................ 48 7.2.2. PEAK OUTPUT POWER .................................................................................................. 52 7.2.3. MAXIMUM PERMISSIBLE EXPOSURE ........................................................................ 63 7.2.4. AVERAGE POWER........................................................................................................... 66 7.2.5. PEAK POWER SPECTRAL DENSITY ............................................................................ 67 7.2.6. EMISSION MASK AND CONDUCTED SPURIOUS...................................................... 78 7.3. CHANNEL TESTS FOR 20 MHz CHANNEL BANDWIDTH MODE ........................................... 85 7.3.1. EMISSION BANDWIDTH ................................................................................................ 85 7.3.2. PEAK OUTPUT POWER .................................................................................................. 89 7.3.3. MAXIMUM PERMISSIBLE EXPOSURE ...................................................................... 100 7.3.4. AVERAGE POWER......................................................................................................... 103 7.3.5. PEAK POWER SPECTRAL DENSITY .......................................................................... 104 7.3.6. EMISSION MASK AND CONDUCTED SPURIOUS.................................................... 115 7.4. RADIATED EMISSIONS ........................................................................................................... 122 REPORT NO: 05U3569-1C DATE: OCTOBER 3, 2005 EUT: 4.9 GHz Access Point FCC ID: HZB-L49U24U50 Page 4 of 153 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGA…

Text truncated - open the document above for the full version.