I8811AXAP2246E802.11ax (WiFi 6E) Triple-Radio Unified Pro Access Point

Default Login Details User’s Guide NWA/WAC/WAX Series 802.11 a/b/g/n/ac/ax Access Point Copyright © 2022 Zyxel and/or its affiliates. All rights reserved. Management IP Address http://DHCP-assigned IP OR http://192.168.1.2 User Nameadmin Password1234 Version 6.40 Edition 1, 7/2022 NWA/WAC/WAX Series User’s Guide 2 IMPORTANT! READ CAREFULLY BEFORE USE. KEEP THIS GUIDE FOR FUTURE REFERENCE. This is a User’s Guide for a series of products. Not all products support all firmware features. Screenshots and graphics in this book may differ slightly from your product due to differences in your product hardware, firmware, or your computer operating system. Every effort has been made to ensure that the information in this manual is accurate. Some screens or options in this book may not be available for your product (see the product feature tables in Section 1.2 on page 14). Related Documentation •Quick Start Guide The Quick Start Guide shows how to connect the Zyxel Device and access the Web Configurator. •CLI Reference Guide The CLI Reference Guide explains how to use the Command-Line Interface (CLI) and CLI commands to configure the Zyxel Device. Note: It is recommended you use the Web Configurator to configure the Zyxel Device. • Web Configurator Online Help Click the help icon in any screen for help in configuring that screen and supplementary information. • Nebula Control Center User’s Guide This User’s Guide shows how to manage the Zyxel Device remotely. The features of these devices can be managed through Nebula Control Center. It also offers features that are not available when the Zyxel Device is in standalone mode (see Section 2.1.2 on page 31). • AC (AP Controller) User’s Guide See the ZyWALL ATP, ZyWALL VPN, USG FLEX, or NXC User’s Guide for instructions on using the gateways or NXC as an AP Controller (AC) for the Zyxel Device. This is used when the Zyxel Device is set to be managed by a Zyxel AC. •More Information Go to support.zyxel.com to find other information on the Zyxel Device . Document Conventions NWA/WAC/WAX Series User’s Guide 3 Document Conventions Warnings and Notes These are how warnings and notes are shown in this guide. Warnings tell you about things that could harm you or your device. Note: Notes tell you other important information (for example, other things you may need to configure or helpful tips) or recommendations. Syntax Conventions • All models in this series may be referred to as the “Zyxel Device” in this guide. • Product labels, screen names, field labels and field choices are all in bold font. • A right angle bracket ( > ) within a screen name denotes a mouse click. For example, Configuration > Network > IP Setting means you first click Configuration in the navigation panel, then the Network sub menu and finally the IP Setting tab to get to that screen. Icons Used in Figures Figures in this guide may use the following generic icons. The Zyxel Device icon is not an exact representation of your device. Zyxel DeviceRouterSwitchInternet ServerDesktopLaptopIP Phone PrinterSmart T.V. Contents Overview NWA/WAC/WAX Series User’s Guide 4 Contents Overview Introduction ........................................................................................................................................... 13 AP Management .................................................................................................................................. 30 Hardware ............................................................................................................................................... 40 Web Configurator ................................................................................................................................. 61 Standalone Configuration ................................................................................................................73 Standalone Configuration ................................................................................................................... 74 Dashboard ............................................................................................................................................ 76 Setup Wizard ......................................................................................................................................... 82 Monitor ................................................................................................................................................... 89 Network ............................................................................................................................................... 104 Wireless ................................................................................................................................................. 117 Bluetooth ............................................................................................................................................. 134 User ....................................................................................................................................................... 137 AP Profile .............................................................................................................................................. 144 MON Profile ......................................................................................................................................... 177 WDS Profile ........................................................................................................................................... 180 Certificates .......................................................................................................................................... 182 System .................................................................................................................................................. 198 Log and Report ............................................................................…

Text truncated - open the document above for the full version.

Chapter 13 AP Profile NWA/WAC/WAX Series User’s Guide 160 13.4.1 Add/Edit Security Profile This screen allows you to create a new security profile or edit an existing one. To access this screen, click the Add button or select a security profile from the list and click the Edit button. These screens’ options change based on the Security Mode selected. Note: 6 GHz SSIDs only support WPA3 encryption. The Zyxel Device will automatically use WPA3 encryption for 6 GHz SSIDs (SSIDs used by the 6 GHz radio) regardless of the Security Mode you select here. The following table describes the labels in this screen. RemoveClick this to remove the selected security profile. This button is not available after you configure the Zyxel Device using the wizard. Object Reference Click this to view which other objects are linked to the selected security profile (for example, SSID profile). #This field is a sequential value, and it is not associated with a specific user. Profile NameThis field indicates the name assigned to the security profile. Security ModeThis field indicates this profile’s security mode (if any). Table 61 Configuration > Object > AP Profile > SSID > Security List (continued) LABELDESCRIPTION Table 62 Configuration > Object > AP Profile > SSID > Security List > Add/Edit Security Profile> Security Mode: none LABELDESCRIPTION General Settings Profile NameEnter up to 31 alphanumeric characters for the profile name. This name is only visible in the Web Configurator and is only for management purposes. Spaces and underscores are allowed. Security ModeSelect a security mode from the list: none, enhanced-open, wep, wpa2, wpa2-mix or wpa3. enhanced-open uses Opportunistic Wireless Encryption (OWE) which encrypts the wireless connection when possible. Authentication Settings EnterpriseSelect this to enable 802.1X secure authentication with a RADIUS server. ReAuthentication Timer Enter the interval (in seconds) between authentication requests. Enter a 0 for unlimited time. Advance Note: Click on the Show Advanced Settings button to show the fields describe below. Idle timeoutEnter the idle interval (in seconds) that a client can be idle before authentication is discontinued. Radius Settings Primary / Secondary Radius Server Activate Select this to have the Zyxel Device use the specified RADIUS server. Radius Server IP Address Enter the IP address of the RADIUS server to be used for authentication. Radius Server PortEnter the port number of the RADIUS server to be used for authentication. Chapter 13 AP Profile NWA/WAC/WAX Series User’s Guide 161 Figure 99 Configuration > Object > AP Profile > SSID > Security List > Add/Edit Security Profile> Security Mode: enhanced-open Radius Server SecretEnter the shared secret password of the RADIUS server to be used for authentication. Primary / Secondary Accounting Server Activate Select the check box to enable user accounting through an external authentication server. Accounting Server IP Address Enter the IP address of the external accounting server in dotted decimal notation. Accounting Server Port Enter the port number of the external accounting server. The default port number is 1813. You need not change this value unless your network administrator instructs you to do so with additional information. Accounting Share Secret Enter a password (up to 128 alphanumeric characters) as the key to be shared between the external accounting server and the Zyxel Device. The key must be the same on the external accounting server and your Zyxel Device. The key is not sent over the network. Accounting Interim Update This field is available only when you enable user accounting through an external authentication server. Select this to have the Zyxel Device send subscriber status updates to the accounting server at the interval you specify. Interim Update Interval Specify the time interval for how often the Zyxel Device is to send a subscriber status update to the accounting server. General Server Settings NAS IP AddressIf the RADIUS server requires the Zyxel Device to provide the NAS (Network Access Server) IP address attribute, enter it here. NAS IdentifierIf the RADIUS server requires the Zyxel Device to provide the NAS (Network Access Server) identifier attribute, enter it here. The NAS identifier is to identify the source of access request. It could be the NAS’s fully qualified domain name. OKClick OK to save your changes back to the Zyxel Device. CancelClick Cancel to exit this screen without saving your changes. Table 62 Configuration > Object > AP Profile > SSID > Security List > Add/Edit Security Profile> Security Mode: none (continued) LABELDESCRIPTION Chapter 13 AP Profile NWA/WAC/WAX Series User’s Guide 162 The following table describes the labels in this screen. Table 63 Configuration > Object > AP Profile > SSID > Security List > Add/Edit Security Profile> Security Mode: enhanced- open LABELDESCRIPTION General Settings Profile NameEnter up to 31 alphanumeric characters for the profile name. This name is only visible in the Web Configurator and is only for management purposes. Spaces and underscores are allowed. Security ModeSelect a security mode from the list: none, enhanced-open, wep, wpa2, wpa2-mix or wpa3. enhanced-open uses Opportunistic Wireless Encryption (OWE) which encrypts the wireless connection when possible. Authentication Settings Transition ModeThis option only displays if you set the Security Mode to wpa3 or enhanced-open. This option is always enabled for backwards compatibility. This creates two virtual APs (VAPs) with a primary (wpa3 or enhanced-open) and fallback (wpa2 or none) security method. Advance Note: Click on the Show Advanced Settings button to show the fields described below. Idle timeoutEnter the idle interval (in seconds) that a client can be idle before authentication is discontinued. Management Frame Protection This field is configurable only when you select wpa2 in the Security Mode field and set Cipher Type to aes. Data frame…

Text truncated - open the document above for the full version.

Zyxel Communications Corporation No.2 Industry East RD. IX, Hsinchu Science Park, Hsinchu 30075, Taiwan, R.O.C Date: July 22, 2022 Federal Communications Commission 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Declaration letter for indoor Access Point 6ID FCC ID: I8811AXAP2246E To whom it may concern: We, Zyxel Communications Corporation, attest that this device under FCC ID I8811AXAP2246E complies with device protocol requirements and operational restrictions: for indoor Access Point 6ID. 1. Protocol attestation statement: Statement describing the method the indoor access point uses to control the associated client/subordinate power control. Statement : The AP uses the IEEE 802.11 beacon signaling to inform the associated client/subordinate device of its permitted maximum power. The IEEE beacon contains a 6GHz Operation Information subfield. The subfield will contain information identifying the AP as a LPI AP and a Maximum Transmit Power Interpretation subfield 2. Statement acknowledging device restrictions: a. Low-power indoor Access Point. Access Point operating in the 5.925-7.125 GHz band shall be supplied power from a wired connection, has an integrated antenna, is not battery-powered, and does not have a weatherized enclosure. b. This device's operation will not be allowed on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet c. Indoor access points are prohibited for control of or communications with unmanned aircraft systems, including drones. Zyxel Communications Corporation No.2 Industry East RD. IX, Hsinchu Science Park, Hsinchu 30075, Taiwan, R.O.C Emma Bao / Manager Zyxel Communications Corporation Tel: 886 3 578-3942 # 88582 E-mail: [email protected]

Zyxel Communications Corporation No.2 Industry East RD. IX, Hsinchu Science Park, Hsinchu 30075, Taiwan, R.O.C Date: 2022/7/22 Federal Communications Commission 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCC ID: I8811AXAP2246E Product name: 802.11ax (WiFi 6E) Triple-Radio Unified Pro Access Point To whom it may concern: We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization of model WAX640S-6E to the FCC Rules and Regulations. International Certification Corp. Address : No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Dist., TaoYuan City 333, Taiwan (R.O.C.) Name : Gary Chang Job Title : Manager e-mail : [email protected] Webs We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Emma Bao / Manager Zyxel Communications Corporation Tel: 886 3 578-3942 # 88582 E-mail: [email protected]

Date: July 22, 2022 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for confidentiality FCC ID: I8811AXAP2246E To whom it may concern: Short-term confidentiality Pursuant to DA 04-1705 of the Commission’s pubic notice, in order to comply with the marketing regulations in 47CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after issue date. ☒ Internal Photographs ☒ External Photographs ☒ User's manual ☒ Test Set up photo Permanent confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: ☒ Block Diagram ☒ Schematics ☒ Operational Description ☐ Bill of Materials ☐ Tune up procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter.

Zyxel Communications Corporation No.2 Industry East RD. IX, Hsinchu Science Park, Hsinchu 30075, Taiwan, R.O.C Date: July 22, 2022 Subject: Ad Hoc Mode Function Declaration FCC ID: I8811AXAP2246E IC ID: 2468C-11AXAP2246E To Whom it may concern, We, Zyxel Communications Corporation declare that the device does not support any non-US channels and country code selection in all the operational mode(s). Emma Bao / Manager Zyxel Communications Corporation Tel: 886 3 578-3942 # 88582 E-mail: [email protected]

Project No.: EP251701 Page No. : 1 of 16 Photographs of EUT Project No.: EP251701 Page No. : 2 of 16 Project No.: EP251701 Page No. : 3 of 16 Project No.: EP251701 Page No. : 4 of 16

The bottom case of the EUT Label Here

Project No.: EP251701 Page No. : 5 of 16 Project No.: EP251701 Page No. : 6 of 16 Project No.: EP251701 Page No. : 7 of 16 Project No.: EP251701 Page No. : 8 of 16 Project No.: EP251701 Page No. : 9 of 16 Project No.: EP251701 Page No. : 10 of 16 Project No.: EP251701 Page No. : 11 of 16 Project No.: EP251701 Page No. : 12 of 16 Project No.: EP251701 Page No. : 13 of 16 Project No.: EP251701 Page No. : 14 of 16 Project No.: EP251701 Page No. : 15 of 16 Project No.: EP251701 Page No. : 16 of 16

Report No.: FA251701 Page : 1 of 7 Report Version: Rev. 01 FCC RF Exposure Report FCC ID : I8811AXAP246E Equipment : 802.11ax (WiFi 6E) Triple-Radio Unified Pro Access Point Model No. : WAX640S-6E Brand Name : ZYXEL Applicant : Zyxel Communications Corporation Address : No.2 Industry East RD. IX, Hsinchu Science Park, Hsinchu 30075, Taiwan, R.O.C Standard : 47 CFR FCC Part 2.1091 Received Date : May 10, 2022 Tested Date : May 10 ~ Jul. 13, 2022 We, International Certification Corporation, would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It shall not be reproduced except in full without the written approval of our laboratory. Reviewed by: Approved by: Along Chen / Assistant Manager Gary Chang / Manager Report No.: FA251701 Page : 2 of 7 Report Version: Rev. 01 Table of Contents 1 MPE EVALUATION OF MOBILE DEVICES ......................................................................................... 4 1.1 LIMITS FOR GENERAL POPULATION/UNCONTROLLED EXPOSURE............................................. 4 1.2 MPE EVALUATION FORMULA ............................................................................................................. 4 1.3 DEVIATION FROM TEST STANDARD AND MEASUREMENT PROCEDURE ................................... 4 1.4 MEASUREMENT UNCERTAINTY ......................................................................................................... 4 1.5 MPE EVALUATION RESULTS .............................................................................................................. 5 1.6 MPE EVALUATION OF SIMULTANEOUS TRANSMISSION ................................................................ 6 2 TEST LABORATORY INFORMATION ................................................................................................. 7 Report No.: FA251701 Page : 3 of 7 Report Version: Rev. 01 Release Record Report No. Version Description Issued Date FA251701 Rev. 01 Initial issue Aug. 02, 2022 Report No.: FA251701 Page : 4 of 7 Report Version: Rev. 01 1 MPE EVALUATION OF MOBILE DEVICES 1.1 LIMITS FOR GENERAL POPULATION/UNCONTROLLED EXPOSURE Frequency Range (MHz) Power Density (mW /cm 2 ) Averaging Time (minutes) 300~1500 F/1500 30 1500~100000 1.0 30 1.2 MPE EVALUATION FORMULA Pd = 2 **4RPi Pt Where Pd= Power density in mW/cm 2 Pt= EIRP in mW Pi= 3.1416 R= Measurement distance 1.3 DEVIATION FROM TEST STANDARD AND MEASUREMENT PROCEDURE None 1.4 MEASUREMENT UNCERTAINTY The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2)). Parameters Uncertainty Conducted power ±0.808 dB Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. Report No.: FA251701 Page : 5 of 7 Report Version: Rev. 01 1.5 MPE EVALUATION RESULTS Non-beamforming mode Frequency Range (MHz) Maximum Conducted Power (dBm) Rated Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) *Ratio Pass / Fail WLAN 2412-2462 25.43 25.5 1.2 20 0.093 1 0.093 Pass 5180-5240 25.44 25.5 4.87 20 0.217 1 0.217 Pass 5260-5320 23.89 24 5.92 20 0.195 1 0.195 Pass 5500-5720 23.72 24 4.08 20 0.128 1 0.128 Pass 5745-5825 25.48 25.5 5.21 20 0.234 1 0.234 Pass 5925-6425 23.20 23.5 3.29 20 0.095 1 0.095 Pass 6425-6525 23.02 23.5 3.34 20 0.096 1 0.096 Pass 6525-6875 23.47 23.5 2.64 20 0.082 1 0.082 Pass 6875-7125 23.09 23.5 3.35 20 0.096 1 0.096 Pass BT 2402-2480 (BT-LE) 3.02 3.5 3 20 0.001 1 0.001 Pass *Ratio = Power density / Limit. Beamforming mode Frequency Range (MHz) Maximum Conducted Power (dBm) Rated Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) *Ratio Pass / Fail WLAN 2412-2462 22.23 22.5 1.17 20 0.046 1 0.046 Pass 5180-5240 22.43 22.5 4.87 20 0.109 1 0.109 Pass 5260-5320 20.88 21 5.92 20 0.098 1 0.098 Pass 5500-5720 20.71 21 4.08 20 0.064 1 0.064 Pass 5745-5825 22.47 22.5 5.21 20 0.117 1 0.117 Pass 5925-6425 17.18 17.5 3.29 20 0.024 1 0.024 Pass 6425-6525 17.00 17.5 3.34 20 0.024 1 0.024 Pass 6525-6875 17.45 17.5 2.64 20 0.021 1 0.021 Pass 6875-7125 17.07 17.5 3.35 20 0.024 1 0.024 Pass *Ratio = Power density / Limit. Report No.: FA251701 Page : 6 of 7 Report Version: Rev. 01 1.6 MPE EVALUATION OF SIMULTANEOUS TRANSMISSION Non-beamforming mode Mode Max Ratio of Each Mode WLAN 2.4GHz 0.093 BLE 0.001 WLAN 5GHz 0.234 WLAN 6GHz 0.096 Sum 0.424 Limit 1 Pass / Fail Pass Beamforming mode Mode Max Ratio of Each Mode WLAN 2.4GHz 0.046 BLE 0.001 WLAN 5GHz 0.117 WLAN 6GHz 0.024 Sum 0.188 Limit 1 Pass / Fail Pass Report No.: FA251701 Page : 7 of 7 Report Version: Rev. 01 2 Test laboratory information Established in 2012, ICC provides foremost EMC & RF Testing and advisory consultation services by our skilled engineers and technicians. Our services employ a wide variety of advanced edge test equipment and one of the widest certification extents in the business. International Certification Corporation (EMC and Wireless Communication Laboratory), it is our definitive objective is to institute long term, trust-based associations with our clients. The expectation we set up with our clients is based on outstanding service, practical expertise and devotion to a certified value structure. Our passion is to grant our clients with best EMC / RF services by oriented knowledgeable and accommodating staff. Our Test sites are located at Linkou District and Kwei Shan District. Location map can be found on our website http://www.icertifi.com.tw. Linkou Kwei Shan Kwei Shan Site II Tel: 886-2-2601-1640 Tel: 886-3-271-8666 Tel: 886-3-271-86…

Text truncated - open the document above for the full version.

Report No.: FR251701AO Page : 1 of 31 Report Version: Rev. 01 FCC Test Report FCC ID : I8811AXAP2246E Equipment : 802.11ax (WiFi 6E) Triple-Radio Unified Pro Access Point Model No. : WAX640S-6E Brand Name : ZYXEL Applicant : Zyxel Communications Corporation Address : No.2 Industry East RD. IX, Hsinchu Science Park, Hsinchu 30075, Taiwan, R.O.C Standard : 47 CFR FCC Part 15.407 Equipment Class / Type : 6ID: Indoor access point 6PP: Subordinate device 6XD: Client device Received Date : May 10, 2022 Tested Date : May 26 ~ Jul. 13, 2022 We, International Certification Corp., would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It may be duplicated completely for legal use with the approval of the applicant. It shall not be reproduced except in full without the written approval of our laboratory. Reviewed by: Approved by: Along Chen / Assistant Manager Gary Chang / Manager Report No.: FR251701AO Page : 2 of 31 Report Version: Rev. 01 Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information .............................................................................................................................................. 5 1.2 Local Support Equipment List .............................................................................................................. 11 1.3 Test Setup Chart .................................................................................................................................. 12 1.4 The Equipment List .............................................................................................................................. 14 1.5 Test Standards ..................................................................................................................................... 15 1.6 Reference Guidance ............................................................................................................................ 16 1.7 Deviation from Test Standard and Measurement Procedure ............................................................... 16 1.8 Measurement Uncertainty .................................................................................................................... 16 2 TEST CONFIGURATION ..................................................................................................................... 17 2.1 Test Modes and Channel Details ......................................................................................................... 18 3 TRANSMITTER TEST RESULTS ........................................................................................................ 19 3.1 Emission Bandwidth ............................................................................................................................. 19 3.2 RF Output Power .................................................................................................................................. 20 3.3 Peak Power Spectral Density ............................................................................................................... 21 3.4 Unwanted Emissions ............................................................................................................................ 22 3.5 In-Band Emissions ............................................................................................................................... 25 3.6 Frequency Stability ............................................................................................................................... 27 3.7 Contention Based Protocol ................................................................................................................... 28 3.8 AC Power Line Conducted Emissions ................................................................................................. 30 4 TEST LABORATORY INFORMATION ............................................................................................... 31 Appendix A. Emission Bandwidth Appendix B. RF Output Power Appendix C. Power Spectral Density Appendix D. Unwanted Emissions Appendix E. In-Band Emissions Appendix F. Frequency Stability Appendix G. Contention Based Protocol Appendix H. AC Power Line Conducted Emissions Report No.: FR251701AO Page : 3 of 31 Report Version: Rev. 01 Release Record Report No. Version Description Issued Date FR251701AO Rev. 01 Initial issue Aug. 02, 2022 Report No.: FR251701AO Page : 4 of 31 Report Version: Rev. 01 Summary of Test Results FCC Rules Test Items Measured Result 15.207 AC Power-Line Conducted Emissions [dBuV]: 0.168MHz 51.77 (Margin -13.31dB) - QP Pass 15.407(b)(5) 15.209 Unwanted Emission [dBuV/m at 3m]: 7125.00MHz 67.52 (Margin -0.68dB) - AV Pass 15.407(b)(6) In-Band Emissions (Mask) Meet the requirement of limit Pass 15.407(a)(10) Emission Bandwidth Meet the requirement of limit Pass 15.407(a)(5) RF Output Power (e.i.r.p) Max Power [dBm]: Non-beamforming mode 5.925-6.425MHz: 23.20 6.425-6.525MHz: 23.02 6.525-6.875MHz: 23.47 6.875-7.125MHz: 23.09 Beamforming mode 5.925-6.425MHz: 17.18 6.425-6.525MHz: 17.00 6.525-6.875MHz: 17.45 6.875-7.125MHz: 17.07 Pass 15.407(a)(5) Power Spectral Density (e.i.r.p) Meet the requirement of limit Pass 15.407(d)(6) Contention Based Protocol Meet the requirement of limit Pass 15.407(g) Frequency Stability Meet the requirement of limit Pass 15.203 Antenna Requirement Meet the requirement of limit Pass Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the re…

Text truncated - open the document above for the full version.

Unwanted Emissions Appendix D Page No. …

Text truncated - open the document above for the full version.