Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Motorola Mobility LLC 222 W. Merchandize Mart Plaza, Chicago Il US www.motorola.com Date: June 28, 2024 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Certifications concerning βcoveredβ equipment pursuant to Part 2.911(d)(5)(i) and (ii) FCC ID: IHDT56AS6 FCC ID: IHDT56AS7 To Whom It May Concern, As required by section 2.911(d)(5)(i) of Commissionβs rules (47 CFR), Motorola Mobility LLC certifies that, as of the date of the filing of the application, the equipment for which authorization is sought is not βcoveredβ equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. As required by section 2.911(d)(5)(ii) of Commissionβs rules (47 CFR), Motorola Mobility LLC certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing βcoveredβ equipment. Sincerely, Jeff Narducci Director, Global Regulatory Compliance [email protected]
Motorola Mobility LLC 222 W. Merchandize Mart Plaza, Chicago Il US www.motorola.com Date: June 28, 2024 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Certification Designing a U.S. Agent for Service of Process Concerning βCoveredβ Equipment Pursuant to Section 1.50002 FCC ID: IHDT56AS6 FCC ID: IHDT56AS7 To Whom It May Concern, As required by section 2.911(d)(7) of Commissionβs rules (47 CFR), Motorola Mobility LLC acknowledge, consents and certifies that, as of the date of the filing of the application until this certification is revoked in writing by the applicant: β’ The applicant designates itself as the U.S. agent to accept service of process. β’ The physical U.S. address and email of the applicant as designated agent are as follows: Attention: Jeff Narducci Company: Motorola Mobility LLC Address: 222 W. Merchandize Mart Plaza, Chicago Il US FRN: 0004321311 Email: Jeff Narducci <[email protected]> β’ Applicant will remain as the designated agent for service for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. β’ The agent accepts the designation by Motorola Mobility LLC as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Sincerely, Jeff Narducci Director, Global Regulatory Compliance [email protected]
Motorola Mobility LLC 222 W. Merchandize Mart Plaza, Chicago Il US www.motorola.com Date: June 28, 2024 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: IHDT56AS6 FCC ID: IHDT56AS7 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commissionβs rules (47 CFR §§ 0.457, 0.459), we are requesting confidentiality for exhibits filed with the commission supporting the application of equipment authorization for those items referenced above. Motorola Mobility respectfully requests the Commission to withhold indefinitely from public disclosure the following attachments under Long-Term Confidentiality. β« Schematic Diagrams β« Block Diagrams β« Part List β« Operational Description β« Tune-up Procedure The above listed documents contain detailed system and equipment descriptions that are proprietary and confidential information under Motorola trade secret protection. Public disclosure of above documents would be harmful to our company and would provide competitors an unfair advantage. This information is not made publicly available even after commercial release of the device. In additional to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissionβ s policy, in order to comply with the marketing regulations in 47 CFR Β§2.803 and the importation rules in 47 CFR Β§2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We request the commission to grant short-term confidentiality request on the following attachments for 180 days after the grant as outlined in Public Notice DA 04-1705. β« External Photos β« Internal Photos β« Test Setup Photos β« User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and that information will be available for public review once the grant of equipment authorization is issued. Sincerely, Jeff Narducci Director, Global Regulatory Compliance [email protected]
Motorola Mobility LLC 222 W. Merchandize Mart Plaza, Chicago Il US www.motorola.com Date: June 28, 2024 To whom it may concern, Please be notified that I, Jeff Narducci, have designated Jones Tsai of Sporton International Inc. and Linbiaochun of Motorola Mobility LLC as the persons being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out in their professional capacity by Jones Tsai of Sporton International Inc. and Linbiaochun of Motorola Mobility LLC in connection with all processes required for FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. This authorization is limited to the following product, and shall remain in place until completion of the certification, or until revoked, whichever is earlier: FCC ID: IHDT56AS6 FCC ID: IHDT56AS7 If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Should you have any questions or comments regarding this matter, please donβt hesitate to contact me. Sincerely yours, Jeff Narducci Director, Global Regulatory Compliance [email protected]
Declaration Model Information: Manufacturerβs Name: Motorola Mobility LLC Manufacturerβs Business Address: 222 W, Merchandise Mart Plaza, Chicago IL 60654 USA Model Name: XT2409-2οΌXT2409-1,XT2409-6 HW version: DVT2 SW version: UUI34.42 Description: We Motorola Mobility LLC declare Software change history are list below Software Change Note SW 1:UUI34.42 SW 2:UUI34.32 SW 3:UUI34.38 SW 4:UUI34.45 The difference between SW 1 SW 2,SW 3 and SW4 is just for different SW version that not affect the RF test _________ Advisory Engineer,GT Cert Tel Email +86-18150396535 [email protected] Date 2024.7.05 Signature
FCC E-Label Information A. Images of the e-label screen are provided below: B. Access to the required information on the e-label Users are able to access the information in no more than three steps in a deviceβs menu. The actual steps are: Settings > then type Regulatory No any special accessories, access codes, or SIM card are required to go through the above steps. C. Devices have physical labels at point of marketing/sale visible to the purchaser (or in the alternative, on the packaging), and at time of importation? At the time of importation, marketing, and sale, the device will have the required physical label on the packaging, which will include the deviceβs FCC ID. D. Electronic labeling information is programmed into the device by the manufacturer at the time of manufacture. Yes. E. Electronic labeling information not modifiable by any third party. The e-label of the device is programmed by the grantee and secured in such a manner that it cannot be modified by third parties. F. All the applicable regulatory information required on the packaging or user instructions is provided according to the rules. Applicable regulatory information not found in the e-label is contained in the user manual.
FCC E-Label Information A. Images of the e-label screen are provided below: B. Access to the required information on the e-label Users are able to access the information in no more than three steps in a deviceβs menu. The actual steps are: Settings > then type Regulatory No any special accessories, access codes, or SIM card are required to go through the above steps. C. Devices have physical labels at point of marketing/sale visible to the purchaser (or in the alternative, on the packaging), and at time of importation? At the time of importation, marketing, and sale, the device will have the required physical label on the packaging, which will include the deviceβs FCC ID. D. Electronic labeling information is programmed into the device by the manufacturer at the time of manufacture. Yes. E. Electronic labeling information not modifiable by any third party. The e-label of the device is programmed by the grantee and secured in such a manner that it cannot be modified by third parties. F. All the applicable regulatory information required on the packaging or user instructions is provided according to the rules. Applicable regulatory information not found in the e-label is contained in the user manual.
FCC RF Exposure Report Report No. : FA452307C Sporton International Inc. (Kunshan) Page : 1 of 8 TEL : +86-512-57900158 Issued Date : : Jul. 05, 2024 Report Template No. : 200414 RF Exposure Report (Part 0: SAR Char Evaluation) APPLICANT : Motorola Mobility LLC EQUIPMENT : Mobile Cellular Phone BRAND NAME : Motorola MODEL NAME : XT2409-1, XT2409-6 FCC ID : IHDT56AS6 STANDARD : FCC 47 CFR PART 2 (2.1093) We, Sporton International Inc. (Kunshan), would like to declare that the tested sample has been evaluated in accordance with the test procedures given in 47 CFR Part 2.1093 and FCC KDB and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International Inc. (Kunshan), the test report shall not be reproduced except in full. Approved by: Si Zhang Sporton International Inc. (Kunshan) No. 1098, Pengxi North Road, Kunshan Economic Development Zone Jiangsu Province 215300 Peopleβs Republic of China FCC RF Exposure Report Report No. : FA452307C Sporton International Inc. (Kunshan) Page : 2 of 8 TEL : +86-512-57900158 Issued Date : : Jul. 05, 2024 Report Template No. : 200414 Table of Contents 1. Introduction ................................................................................................................................................................... 4 2. Product Description ...................................................................................................................................................... 5 3. SAR Characterization .................................................................................................................................................... 6 3.1 SAR design target and uncertainty......................................................................................................................... 6 3.2 SAR Char Table ..................................................................................................................................................... 7 FCC RF Exposure Report Report No. : FA452307C Sporton International Inc. (Kunshan) Page : 3 of 8 TEL : +86-512-57900158 Issued Date : : Jul. 05, 2024 Report Template No. : 200414 History of this test report Report No. Version Description Issued Date FA452307C 01 Initial issue of report Jul. 05, 2024 FCC RF Exposure Report Report No. : FA452307C Sporton International Inc. (Kunshan) Page : 4 of 8 TEL : +86-512-57900158 Issued Date : : Jul. 05, 2024 Report Template No. : 200414 1. Introduction The RF exposure limit is defined based on time-averaged RF exposure. The product implements MediaTek TA-SAR feature which controls the instantaneous transmitting power for WWAN to ensure the product in compliance with RF exposure limit over a defined time window, for SAR (transmit frequency β€ 6GHz). To control and manage transmitting power in real time and to ensure at all times the time-averaged RF exposure is compliant to the regulation requirement. TA-SAR cannot operate without SAR characterization at the device level, beforehand. This report describes the procedures for the SAR char generation, and the parameters obtained from SAR characterization (referred to as SAR char, respectively) will be used as input for TA-SAR algorithm. Both SAR char will be entered via the MediaTekβs NV suggestion to enable the TA-SAR Feature. Terminologies in this report P limit The time-averaged RF power which corresponds to SAR_design_target. P max Maximum target power level SAR_design_target: The design target for SAR compliance. It should be less than regulatory power density limit to account for all device design related uncertainty. SAR char P limit for all the technologies/bands for all applicable ECI FCC RF Exposure Report Report No. : FA452307C Sporton International Inc. (Kunshan) Page : 5 of 8 TEL : +86-512-57900158 Issued Date : : Jul. 05, 2024 Report Template No. : 200414 2. Product Description Product Feature & Specification Equipment Name Mobile Cellular Phone Brand Name Motorola Model Name XT2409-1, XT2409-6 FCC ID IHDT56AS6 Wireless Technology and Frequency Range GSM850: 824 MHz ~ 849 MHz GSM1900: 1850 MHz ~ 1910 MHz WCDMA Band II: 1850 MHz ~ 1910 MHz WCDMA Band IV: 1710 MHz ~ 1755 MHz WCDMA Band V: 824 MHz ~ 849 MHz LTE Band 2: 1850 MHz ~ 1910 MHz LTE Band 4: 1710 MHz ~ 1755 MHz LTE Band 5: 824 MHz ~ 849 MHz LTE Band 7: 2500 MHz ~ 2570 MHz LTE Band 12: 699 MHz ~ 716 MHz LTE Band 13: 777 MHz ~ 787 MHz LTE Band 17: 704 MHz ~ 716 MHz LTE Band 25: 1850 MHz ~ 1915 MHz LTE Band 26: 814 MHz ~ 849 MHz LTE Band 38: 2570 MHz ~ 2620 MHz LTE Band 41: 2496 MHz ~ 2690 MHz LTE Band 42: 3450 MHz ~3550 MHz LTE Band 66: 1710 MHz ~ 1780 MHz 5G NR n2 : 1850 MHz ~ 1910 MHz 5G NR n5: 824 MHz ~ 849 MHz 5G NR n7: 2500 MHz ~ 2570 MHz 5G NR n26 : 814 MHz ~ 849 MHz 5G NR n66: 1710 MHz ~ 1780 MHz 5G NR n38 : 2570 MHz ~ 2620 MHz 5G NR n41 : 2496 MHz ~ 2690 MHz 5G NR n77: 3700 MHz ~ 3980 MHz 5G NR n78: 3700 MHz ~ 3800 MHz WLAN 2.4GHz Band: 2412 MHz ~ 2462 MHz WLAN 5.2GHz Band: 5180 MHz ~ 5240 MHz WLAN 5.3GHz Band: 5260 MHz ~ 5320 MHz WLAN 5.5GHz Band: 5500 MHz ~ 5720 MHz WLAN 5.8GHz Band: 5745 MHz ~ 5825 MHz WLAN 6GHz U-NII-5: 5925 MHz ~ 6425 MHz WLAN 6GHz U-NII-6: 6425 MHz ~ 6525 MHz WLAN 6GHz U-NII-7: 6525 MHz ~ 6875 MHz WLAN 6GHz U-NII-8: 6875 MHz ~ 7125 MHz Bluetooth: 2402 MHz ~ 2480 MHz NFC : 13.56 MHz Mode GSM/GPRS/EGPRS RMC/AMR 12.2Kbps HSDPA HSUPA DC-HSDPA HSPA+(16QAM uplink is supported) LTE: QPSK, 16QAM, 64QAM, 256QAM 5G NR : CP-OFDM / DFT-s-OFDM, PI/2 BPSK, QPSK, 16QAM, 64QAM, 256QAM WLAN 2.4GHz 802.11b/g/n HT20/HT40 WLAN 2.4GHz 802.11ax HE20/HE40 WLAN 5GHz 802.11a/n HT20/HT40 WLAN 5GHz 802.11ac/ax VHT20/VHT40/VHT80/HE20/HE40/HE80 WLAN 6GHz 802.11ax HE20/HE40/HE80 Bluetooth BR/EDR/LE NFC: ASK FCC RF Exposure Report Report No. : FA452307C Sporton International Inc. (Kunshan) Page : 6 of 8 TEL : +86-512-57900158 Issued Date : : Jul. 05, 2024 Report Template No. : 200β¦
Text truncated - open the document above for the full version.
Date: 2024-05-28 System Check_Head_750MHz DUT:D750V3 - SN:1087 Communication System: ; Frequency: 750.000 Medium: HSL. Medium parameters used: f= 750.000 MHz; Ο= 0.905 S/m; Ξ΅ r = 42.7 Ambient Temperature: 23.1Β°C; Liquid Temperature: 22.8Β°C DASY6 Configuration: - Probe: EX3DV4 - SN7706; ConvF(9.34, 10.73, 9.7); Calibrated: 2024-01-24 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1303; Calibrated: 2023-11-20 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2024 - Measurement Software: 16.4.0.5005 Area Scan (40.0 mm x 90.0 mm): Measurement Grid: 10.0 mm x 15.0 mm SAR (1g) = 0.436 W/kg; SAR (10g) = 0.291 W/kg; Zoom Scan (30.0 mm x 30.0 mm x 30.0 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm; Graded Ratio:1.5 Power Drift = 0.02 dB SAR (1g) = 0.435 W/kg; SAR (10g) = 0.292 W/kg; Smallest distance from peaks to all points 3dB below is 19.7 mm Ratio of SAR at M2 to SAR at M1 = 88.7 % Date: 2024-05-29 System Check_Head_835MHz DUT:D835V2 - SN:4d091 Communication System: ; Frequency: 835.000 Medium: HSL. Medium parameters used: f= 835.000 MHz; Ο= 0.924 S/m; Ξ΅ r = 41.4 Ambient Temperature: 23.1Β°C; Liquid Temperature: 22.9Β°C DASY6 Configuration: - Probe: EX3DV4 - SN7706; ConvF(9.26, 10.67, 9.28); Calibrated: 2024-01-24 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1303; Calibrated: 2023-11-20 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2024 - Measurement Software: 16.4.0.5005 Area Scan (40.0 mm x 90.0 mm): Measurement Grid: 10.0 mm x 15.0 mm SAR (1g) = 0.508 W/kg; SAR (10g) = 0.317 W/kg; Zoom Scan (30.0 mm x 30.0 mm x 30.0 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm; Graded Ratio:1.5 Power Drift = 0.01 dB SAR (1g) = 0.505 W/kg; SAR (10g) = 0.328 W/kg; Smallest distance from peaks to all points 3dB below is 15.6 mm Ratio of SAR at M2 to SAR at M1 = 89.7 % Date: 2024-05-30 System Check_Head_1750MHz DUT:D1750V2 - SN:1090 Communication System: ; Frequency: 1750.000 Medium: HSL. Medium parameters used: f= 1750.000 MHz; Ο= 1.35 S/m; Ξ΅ r = 40.1 Ambient Temperature: 23.4Β°C; Liquid Temperature: 22.7Β°C DASY6 Configuration: - Probe: EX3DV4 - SN7706; ConvF(7.87, 9.06, 8.09); Calibrated: 2024-01-24 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1303; Calibrated: 2023-11-20 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2024 - Measurement Software: 16.4.0.5005 Area Scan (40.0 mm x 90.0 mm): Measurement Grid: 10.0 mm x 15.0 mm SAR (1g) = 1.99 W/kg; SAR (10g) = 1.00 W/kg; Zoom Scan (30.0 mm x 30.0 mm x 30.0 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm; Graded Ratio:1.5 Power Drift = 0.01 dB SAR (1g) = 1.99 W/kg; SAR (10g) = 1.01 W/kg; Smallest distance from peaks to all points 3dB below is 9.6 mm Ratio of SAR at M2 to SAR at M1 = 82.4 % Date: 2024-05-31 System Check_Head_1900MHz DUT:D1900V2 - SN:5d118 Communication System: ; Frequency: 1900.000 Medium: HSL. Medium parameters used: f= 1900.000 MHz; Ο= 1.43 S/m; Ξ΅ r = 39.8 Ambient Temperature: 23.1Β°C; Liquid Temperature: 22.6Β°C DASY6 Configuration: - Probe: EX3DV4 - SN7706; ConvF(7.77, 8.97, 7.88); Calibrated: 2024-01-24 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1303; Calibrated: 2023-11-20 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2024 - Measurement Software: 16.4.0.5005 Area Scan (40.0 mm x 90.0 mm): Measurement Grid: 10.0 mm x 15.0 mm SAR (1g) = 2.01 W/kg; SAR (10g) = 1.06 W/kg; Zoom Scan (30.0 mm x 30.0 mm x 30.0 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm; Graded Ratio:1.5 Power Drift = 0.01 dB SAR (1g) = 2.09 W/kg; SAR (10g) = 1.10 W/kg; Smallest distance from peaks to all points 3dB below is 9.2 mm Ratio of SAR at M2 to SAR at M1 = 83.7 % Date: 2024-06-01 System Check_Head_2450MHz DUT:D2450V2 - SN:1095 Communication System: ; Frequency: 2450.000 Medium: HSL. Medium parameters used: f= 2450.000 MHz; Ο= 1.86 S/m; Ξ΅ r = 38.4 Ambient Temperature: 23.1Β°C; Liquid Temperature: 22.9Β°C DASY6 Configuration: - Probe: EX3DV4 - SN7706; ConvF(7.47, 8.61, 7.55); Calibrated: 2024-01-24 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1303; Calibrated: 2023-11-20 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2024 - Measurement Software: 16.4.0.5005 Area Scan (40.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 2.83 W/kg; SAR (10g) = 1.34 W/kg; Zoom Scan (30.0 mm x 30.0 mm x 30.0 mm): Measurement Grid: 5.0 mm x 5.0 mm x 1.5 mm; Graded Ratio:1.5 Power Drift = -0.01 dB SAR (1g) = 2.76 W/kg; SAR (10g) = 1.31 W/kg; Smallest distance from peaks to all points 3dB below is 9.0 mm Ratio of SAR at M2 to SAR at M1 = 82.0 % Date: 2024-06-02 System Check_Head_2600MHz DUT:D2600V2 - SN:1112 Communication System: ; Frequency: 2600.000 Medium: HSL. Medium parameters used: f= 2600.000 MHz; Ο= 1.96 S/m; Ξ΅ r = 40.4 Ambient Temperature: 23.3Β°C; Liquid Temperature: 22.7Β°C DASY6 Configuration: - Probe: EX3DV4 - SN7706; ConvF(7.3, 8.44, 7.37); Calibrated: 2024-01-24 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1303; Calibrated: 2023-11-20 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2024 - Measurement Software: 16.4.0.5005 Area Scan (40.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 2.88 W/kg; SAR (10g) = 1.31 W/kg; Zoom Scan (30.0 mm x 30.0 mm x 30.0 mm): Measurement Grid: 5.0 mm x 5.0 mm x 1.5 mm; Graded Ratio:1.5 Power Drift = -0.05 dB SAR (1g) = 2.82 W/kg; SAR (10g) = 1.29 W/kg; Smallest distance from peaks to all points 3dB below is 8.0 mm Ratio of SAR at M2 to SAR at M1 = 80.9 % Date: 2024-06-03 System Check_Head_3500MHz DUT:D3500V2 - SN:1037 Communication System: ; Frequency: 3500.000 Medium: HSL. Medium parameters used: f= 3500.000 MHz; Ο= 2.88 S/m; Ξ΅ r = 38.5 Ambient Temperature: 23.1Β°C; Liquid Temperature: 22.8Β°C DASY6 Configuration: - Probe: EX3DV4 - SN7706; ConvF(6.99, 8.16, 7.09); Calibrated: 2024-01-24 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1303; Calibrated: 2023-11-20 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2024 - Measurement Software: 16.4.0.5005 Area Scan (40.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 3.43 W/kg; SAR (10g) = 1.35 W/kg; Zoom Scan (28.β¦
Text truncated - open the document above for the full version.
TEL : 886-3-327-3456 Page : 1 of 98 FAX : 886-3-328-4978 Issued Date : Jul. 03, 2024 FCC TAS Validation Report Report No. : FA452316 FCC TAS validation β Part 2: Tests under dynamic transmit power scenarios FCC ID : IHDT56AS6 Equipment : Mobile Cellular Phone Brand Name : Motorola Model Name : XT2409-1, XT2409-6 Applicant : Motorola Mobility LLC 222 W,Merchandise Mart Plaza, Chicago IL 60654 USA Manufacturer : Motorola Mobility LLC 222 W,Merchandise Mart Plaza, Chicago IL 60654 USA Standard : FCC 47 CFR Part 2 (2.1093) The product was received on Jun. 05, 2024 and testing was started from Jun. 27, 2024 and completed on Jun. 27, 2024. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample provide by manufacturer and the test data has been evaluated in accordance with the test procedures given in 47 CFR Part 2.1093 and FCC KDB and has been pass the FCC requirement. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Laboratory, the test report shall not be reproduced except in full. Sporton International Inc. EMC & Wireless Communications Laboratory No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan Approved by: Cona Huang / Deputy Manager TEL : 886-3-327-3456 Page : 2 of 98 FAX : 886-3-328-4978 Issued Date : Jul. 03, 2024 FCC TAS Validation Report Report No. : FA452316 Table of Contents 1. Overview ......................................................................................................................................................................................................... 4 2. Operating Parameters for Algorithm Validation ............................................................................................................................................ 5 3. Overview of TA-SAR Test Proposal ............................................................................................................................................................... 6 4. TA-SAR Test Scenarios and Test Procedures .............................................................................................................................................. 7 4.1 Test Sequences for All Scenarios .............................................................................................................................................................. 8 4.2 Test Configuration and Procedure for Scenario 1: Range of TA-SAR Parameters via Conducted Power Measurements .......................... 12 4.2.1 Configuration .................................................................................................................................................................................. 12 4.2.2 Procedure ...................................................................................................................................................................................... 12 4.3 Test Configuration and Procedure for Scenario 1: Range of TA-SAR Parameters via Conducted Power Measurements .......................... 14 4.3.1 Configuration .................................................................................................................................................................................. 14 4.3.2 Procedure ...................................................................................................................................................................................... 15 4.4 Test Configuration and Procedure for Scenario 3: Call Disconnection and Re-establishment via Conducted Power Measurements ......... 17 4.4.1 Configuration .................................................................................................................................................................................. 17 4.4.2 Procedure ...................................................................................................................................................................................... 17 4.5 Test Configuration and Procedure for Scenario 1: Range of TA-SAR Parameters via Conducted Power Measurements .......................... 19 4.5.1 Configuration .................................................................................................................................................................................. 19 4.5.2 Procedure ...................................................................................................................................................................................... 19 4.6 Test Configuration and Procedure for Scenario 5: Exposure Condition Index (ECI) Change via Conducted Power Measurements ........... 21 4.6.1 Configuration .................................................................................................................................................................................. 21 4.6.2 Procedure ...................................................................................................................................................................................... 21 4.7 Test Configuration and Procedure for Scenario 6: Antenna Switching via Conducted Power Measurements ............................................ 22 4.7.1 Configuration .................................................................................................................................................................................. 22 4.7.2 Procedure ...................................................................................................................................................................................... 22 4.8 Test Configuration and Procedure for Scenario 7: Time Window Switching via Conducted Power Measurements .................................... 23 4.8.1 Configuration ....................................................................................................................................β¦
Text truncated - open the document above for the full version.
Date: 2024-05-28 01_LTE Band 12_10M_QPSK_1RB_0Offset_Right Cheek_0mm_Ch23095 Communication System: Band 12; Frequency: 707.500 Medium: HSL. Medium parameters used: f= 707.500 MHz; Ο= 0.863 S/m; Ξ΅ r = 43.3 Ambient Temperature: 23.1Β°C; Liquid Temperature: 22.8Β°C DASY6 Configuration: - Probe: EX3DV4 - SN7706; ConvF(9.34, 10.73, 9.7); Calibrated: 2024-01-24 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1303; Calibrated: 2023-11-20 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2024 - Measurement Software: 16.4.0.5005 Area Scan (120.0 mm x 210.0 mm): Measurement Grid: 10.0 mm x 15.0 mm SAR (1g) = 0.783 W/kg; SAR (10g) = 0.487 W/kg; Zoom Scan (30.0 mm x 30.0 mm x 30.0 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm; Graded Ratio:1.4 Power Drift = -0.09 dB SAR (1g) = 0.713 W/kg; SAR (10g) = 0.435 W/kg; Smallest distance from peaks to all points 3dB below is 6.3 mm Ratio of SAR at M2 to SAR at M1 = 68.9 % Date: 2024-05-28 02_LTE Band 13_10M_QPSK_1RB_0Offset_Right Cheek_0mm_Ch23230 Communication System: Band 13; Frequency: 782.000 Medium: HSL. Medium parameters used: f= 782.000 MHz; Ο= 0.935 S/m; Ξ΅ r = 42.4 Ambient Temperature: 23.1Β°C; Liquid Temperature: 22.8Β°C DASY6 Configuration: - Probe: EX3DV4 - SN7706; ConvF(9.34, 10.73, 9.7); Calibrated: 2024-01-24 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1303; Calibrated: 2023-11-20 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2024 - Measurement Software: 16.4.0.5005 Area Scan (120.0 mm x 210.0 mm): Measurement Grid: 10.0 mm x 15.0 mm SAR (1g) = 0.776 W/kg; SAR (10g) = 0.486 W/kg; Zoom Scan (30.0 mm x 30.0 mm x 30.0 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm; Graded Ratio:1.5 Power Drift = -0.17 dB SAR (1g) = 0.685 W/kg; SAR (10g) = 0.431 W/kg; Smallest distance from peaks to all points 3dB below is 7.6 mm Ratio of SAR at M2 to SAR at M1 = 71.8 % Date: 2024-05-29 03_GSM850_GPRS (4 Tx slots)_Right Cheek_0mm_Ch128 Communication System: GSM 850; Frequency: 824.200 Medium: HSL. Medium parameters used: f= 824.200 MHz; Ο= 0.914 S/m; Ξ΅ r = 41.6 Ambient Temperature: 23.1Β°C; Liquid Temperature: 22.9Β°C DASY6 Configuration: - Probe: EX3DV4 - SN7706; ConvF(9.26, 10.67, 9.28); Calibrated: 2024-01-24 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1303; Calibrated: 2023-11-20 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2024 - Measurement Software: 16.4.0.5005 Area Scan (120.0 mm x 210.0 mm): Measurement Grid: 15.0 mm x 15.0 mm SAR (1g) = 0.629 W/kg; SAR (10g) = 0.411 W/kg; Zoom Scan (30.0 mm x 30.0 mm x 30.0 mm): Measurement Grid: 6.0 mmβ¦
Text truncated - open the document above for the full version.
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|---|---|---|---|---|
| 77 | 9 | 819 MHz - 819 MHz | 179.10 mW | 9M29W7D | 2.5 ppm |
Smart Watch
Equipment Class
JAB - Part 15 Class B Digital DeviceMobile Cellular Phone
Equipment Class
JBP - Part 15 Class B Computing Device PeripheralSmart Watch
Equipment Class
NII - Unlicensed National Information Infrastructure TXMobile Cellular Phone
Equipment Class
DTS - Digital Transmission SystemSmart Watch
Equipment Class
JBP - Part 15 Class B Computing Device Peripheral