IHDT56CN1Portable PCS GSM Transceiver

D R A F T 1 Safety and General Information IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR PHONE. The information provided in this document supersedes the general safety information in user guides published prior to December1,2002. Exposure To Radio Frequency (RF) Energy Your phone contains a transmitter and a receiver. When it is ON, it receives and transmits RF energy. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits. Your Motorola phone is designed to comply with local regulatory requirements in your country concerning exposure of human beings to RF energy. Operational Precautions To assure optimal phone performance and make sure human exposure to RF energy is within the guidelines set forth in the relevant standards, always adhere to the following procedures. External Antenna Care Use only the supplied or Motorola-approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the phone. Do NOT hold the external antenna when the phone is IN USE. Holding the external antenna affects call quality and may cause the phone to operate at a higher power level than needed. In addition, use of unauthorized antennas may result in non-compliance with the local regulatory requirements in your country. D R A F T 2 Phone Operation When placing or receiving a phone call, hold your phone as you would a wireline telephone. Body-Worn Operation To maintain compliance with RF energy exposure guidelines, if you wear a phone on your body when transmitting, always place the phone in a Motorola-supplied or approved clip, holder, holster, case, or body harness for this phone, if available. Use of accessories not approved by Motorola may exceed RF energy exposure guidelines. If you do not use one of the body-worn accessories approved or supplied by Motorola, and are not using the phone held in the normal use position, ensure the phone and its antenna are at least 1inch (2.5centimeters) from your body when transmitting. Data Operation When using any data feature of the phone, with or without an accessory cable, position the phone and its antenna at least 1inch (2.5centimeters) from your body. Approved Accessories Use of accessories not approved by Motorola, including but not limited to batteries and antenna, may cause your phone to exceed RF energy exposure guidelines. For a list of approved Motorola accessories, visit our website at www.Motorola.com. RF Energy Interference/Compatibility Note: Nearly every electronic device is susceptible to RF energy interference from external sources if inadequately shielded, designed, or otherwise configured for RF energy compatibility. In some circumstances your phone may cause interference. Facilities Turn off your phone in any facility where posted notices instruct you to do so. These facilities may include hospitals or health care facilities that may be using equipment that is sensitive to external RF energy. D R A F T 3 Aircraft When instructed to do so, turn off your phone when on board an aircraft. Any use of a phone must be in accordance with applicable regulations per airline crew instructions. Medical Devices Pacemakers Pacemaker manufacturers recommend that a minimum separation of 6inches (15centimeters) be maintained between a handheld wireless phone and a pacemaker. Persons with pacemakers should: •ALWAYS keep the phone more than 6inches (15centimeters) from your pacemaker when the phone is turned ON. •NOT carry the phone in the breast pocket. •Use the ear opposite the pacemaker to minimize the potential for interference. •Turn OFF the phone immediately if you have any reason to suspect that interference is taking place. Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. Use While Driving Check the laws and regulations on the use of phones in the area where you drive. Always obey them. D R A F T 4 When using your phone while driving, please: •Give full attention to driving and to the road. •Use hands-free operation, if available. •Pull off the road and park before making or answering a call if driving conditions so require. Responsible driving best practices may be found in the “Wireless Phone Safety Tips” at the end of this manual and at the Motorola website: www.Motorola.com/callsmart. Operational Warnings For Vehicles With an Air Bag Do not place a phone in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a phone is placed in the air bag deployment area and the air bag inflates, the phone may be propelled with great force and cause serious injury to occupants of the vehicle. Potentially Explosive Atmospheres Turn off your phone prior to entering any area with a potentially explosive atmosphere, unless it is a phone type especially qualified for use in such areas and certified as “Intrinsically Safe.” Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death. Note: The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Areas with potentially explosive atmospheres are often but not always posted. Blasting Caps and Areas To avoid possible interference with blasting operations, turn OFF your phone when you are near electrical blasting caps, in a blasting area, or in D R A F…

Text truncated - open the document above for the full version.

APPLICANT: MOTOROLA, INC. FCC ID: IHDT56CN1 EXHIBIT 8 INSTRUCTION MANUAL A preliminary draft copy of the Users Manual follows: 1 Welcome Welcome This user’s guide introduces you to the many features in your A920 multimedia communicator. Power/End Key Press & hold to turn on & off. Press & release to end calls. Earpiece Touchscreen Volume Up/Down Camera Send Key Press to make & answer calls. Shortcut Key Press to go to favorite application (default: Home screen). 3 Key Press to use features from 3. Status Light Voice Key Speakerphone Key Microphone Navigation Key Press arrows to move through items. Press center to select highlighted item. Game Key A Game Key B 2 Welcome MOTOROLA, the Stylized M Logo, and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. All other product or service names are the property of their respective owners. © 2002 Motorola, Inc. All rights reserved. Personal Communications Sector 1500 Gateway Blvd., Boynton Beach, FL 33426-8292 Manual Number: 6800000025-O Software Copyright Notice The Motorola products described in this manual may include copyrighted Motorola and third-party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third-party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the Motorola products may not be modified, reverse- engineered, distributed, or reproduced in any manner to the extent allowed by law. Furthermore, the purchase of the Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third- party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product. 3 Contents Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety and General Information. . . . . . . . . . . . . . . . . . . 8 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 What’s in the Box? . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 About this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Optional Features . . . . . . . . . . . . . . . . . . . . . . . . . 16 Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . 17 Installing the USIM Card . . . . . . . . . . . . . . . . . . . . . . 17 Installing the Memory Card . . . . . . . . . . . . . . . . . . . . 19 Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . 20 Battery Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Turning Your Communicator On . . . . . . . . . . . . . . . . . 23 Setting up Your Communicator . . . . . . . . . . . . . . . . . . 23 Making and Answering Calls . . . . . . . . . . . . . . . . . . . 23 Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Using Your Communicator. . . . . . . . . . . . . . . . . . . . . . 25 Communicator Display . . . . . . . . . . . . . . . . . . . . . . . . 25 Using Touchscreen Control . . . . . . . . . . . . . . . . . . . . 26 Using Navigation Key . . . . . . . . . . . . . . . . . . . . . . . . . 26 Using 3 Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Using Game Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Game Key A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Game Key B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Opening Applications . . . . . . . . . . . . . . . . . . . . . . . . . 28 Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 4 Contents Switching Folders . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Filing New Entry in Folder . . . . . . . . . . . . . . . . . . . 30 Moving Entry to a Different Folder . . . . . . . . . . . . . 30 Adding, Renaming, and Deleting Folders . . . . . . . 30 Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Handwriting Recognition . . . . . . . . . . . . . . . . . . . . 33 Virtual Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Home Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Displaying Home Screen . . . . . . . . . . . . . . . . . . . . . . 36 Screen Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Personalizing Home Screen . . . . . . . . . . . . . . . . . . . 37 Calling Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Opening Phone Application . . . . . . . . . . . . . . . . . . . . 38 Making a Voice Call . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Dialing with Keypad . . . . . . . . . . . . . . . . . . . . . . . . 39 Dialing Stored Phone Numbers . . . . . . . . . . . . . . . 39 Using Voice Dialing . . . . . . . . . . . . . . . . . . . . . . . . 39 Redialing Failed Voice Calls . . . . . . . . . . . . . . . . . . 40 Making a Video Call . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Dialing Video Call with Keypad . . . . . . . . . . . . . . . 41 Dialing Stored Phone Numbers . . . . . . . . . . . . . . . 42 Retrying Failed Video Calls . . . . . . . . . . . . . . . . . . 42 Making an Emergency Call . . . . . . . . . . . . . . . . . . . . 43 Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Adjusting Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Using Speakerphone . …

Text truncated - open the document above for the full version.

APPLICANT MOTOROLA INC. FCC ID:IHDT56CN1 EXHIBIT 2 ATTESTATION STATEMENTS The transceiver type IHDT56CN1 has been tested in accordance with the requirements contained in the appropriate Commission regulations. To the best of my knowledge, these tests were performed using measurement procedures consistent with industry or Commission standards and demonstrate that this equipment complies with the appropriate standards. Each unit manufactured imported or marketed, will conform to the sample tested within the variations that can be expected due to quantity production and testing on a statistical basis. I further certify that the necessary measurements were made at Motorola, located at 600 North U.S. Highway 45, Libertyville, Illinois; or at Motorola, located at 1500 Gateway Boulevard, Boynton Beach, Florida; or at Motorola, located at 2001 N. Division Street, Harvard, Illinois; or at Motorola, located at 1900 Winchester, Libertyville, Illinois, or at Elite Electronic Engineering Inc. NAME: Carl Chin TITLE : Engineering Manager PCS Development Signed: (signed) Date : 2/15/2003 Page 1 of 1 EXHIBIT 2 APPLICANT MOTOROLA INC. FCC ID:IHDT56CN1 The technical data supplied with this application , was taken under my supervision is hereby duly certified . I also certify that this transmit equipment (FCC ID : IHDT56CN1) compliance with all applicable parts of the FCC Rules . The following is a statement of my qualifications : NAME : Chad Kurszewski TITLE : Lead Engineer PCS Development Signed: (signed) Date : 2/15/2003 I hereby certify that the above application was prepared under my direction and that to the best of my knowledge and belief , the facts set forth in this application and accompanying technical data are true and correct . NAME : Chad Kurszewski TITLE : Lead Engineer PCS Development Signed: (signed) Date : 2/15/2003 Page 2 of 2 EXHIBIT 2

APPLICANT: MOTOROLAFCC ID: IHDT56CN1 Exhibit 13 February 20, 2003 CONFIDENTIALITY REQUEST CONTAINED WITHIN Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Application for Cellular/PCS Transceiver Certification Gentlemen: Application: Motorola, Inc., Personal Communications Sector, 600 N. U.S. Highway 45, Libertyville, Illinois 60048-1286 herein submits: Application for Equipment Authorization for Certification of a Cellular Transceiver, FCC ID: IHDT56CN1. Motorola is also the manufacturer of this equipment. Confidentiality: Pursuant to Section 0.459 of the Commission's rules (CFR 47), Motorola requests confidentiality for portions of the material contained in this application and that the identified material be withheld from public inspection following the grant of this authorization. This material contains Motorola's trade secrets and confidential information that Motorola does not customarily release to the public and which is otherwise not generally available to the public. Confidentiality is requested for the following exhibits:
Exhibit 4 Block Diagrams
Exhibit 5 Schematics
Exhibit 12 Operational Description Description: This equipment is similar to FCC ID: IHDT56CD1. It is a GSM portable transceiver, which operates in the 1900 MHz PCS bands (Part 24E). The unit also contains a 2.4 GHz Bluetooth transmitter (Part 15.247). Note: This device contains 900 MHz and 1800 MHz GSM, and WCDMA functions that are not operational in U.S. territories. Contact Information: Please contact me by telephone at (847) 523-6167,or by e-mail ([email protected]), if there are questions or additional information needed concerning this filing. Regards, Andrew J. Bachler FCC Liaison Cellular Subscriber Sector 600 N. U.S. Highway 45 Libertyville, IL 60048-5343

APPLICANT: MOTOROLAFCC ID: IHDT56CN1 Exhibit 13A March 11, 2003 CONFIDENTIALITY REQUEST CONTAINED WITHIN Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Application for Cellular/PCS Transceiver Certification Gentlemen: Application: Motorola, Inc., Personal Communications Sector, 600 N. U.S. Highway 45, Libertyville, Illinois 60048-1286 herein submits: Application for Equipment Authorization for Certification of a Cellular Transceiver, FCC ID: IHDT56CN1. Motorola is also the manufacturer of this equipment. Confidentiality: Pursuant to Section 0.459 of the Commission's rules (CFR 47), Motorola requests confidentiality for portions of the material contained in this application and that the identified material be withheld from public inspection following the grant of this authorization. This material contains Motorola's trade secrets and confidential information that Motorola does not customarily release to the public and which is otherwise not generally available to the public. Confidentiality is requested for the following exhibits:
Exhibit 4 Block Diagrams
Exhibit 5 Schematics
Exhibit 12 Operational Description Description: This equipment is similar to FCC ID: IHDT56CD1. It is a GSM portable transceiver, which operates in the 1900 MHz PCS bands (Part 24E). Note: This device contains 900 MHz and 1800 MHz GSM, and WCDMA functions that are not operational in U.S. territories. Contact Information: Please contact me by telephone at (847) 523-6167,or by e-mail ([email protected]), if there are questions or additional information needed concerning this filing. Regards, Andrew J. Bachler FCC Liaison Cellular Subscriber Sector 600 N. U.S. Highway 45 Libertyville, IL 60048-5343

APPLICANT: MOTOROLA, INC. FCC ID: IHDT56CN1 EXHIBIT 3 Front View Rear View with Battery Removed to Show Equipment ID Label

APPLICANT: MOTOROLA INC. FCC ID: IHDT56CN1 FCC IDENTIFICATION (NAMEPLATE) INFORMATION FCC ID: IHDT56CN1 The FCC label shown is representative of the label that will appear on the radio when in production. It will be placed on the outside of the equipment as shown in Exhibit 3. Other information may also be included on this label. EXHIBIT 1

APPLICANT: MOTOROLA, INC. FCC ID: IHDT56CN1 EXHIBIT 9 Front View Rear View 1 of 2 APPLICANT: MOTOROLA, INC. FCC ID: IHDT56CN1 EXHIBIT 9 Inside View of Front Housing Inside View of Rear Housing 2 of 2

APPLICANT: MOTOROLA, INC. FCC ID: IHDT56CN1 E E x x h h i i b b i i t t 1 1 1 1 Exhibit 11: SAR Test Report IHDT56CN1 Date of test: Date of Report: February 14 & 17, 2003 February 20, 2003 Laboratory: Motorola Personal Communications Sector Product Safety & Compliance Laboratory 2001 N. Division Room: AS228 Harvard, Illinois 60033 Test Responsible: Steven Hauswirth Principal Staff Engineer Accreditation: This laboratory is accredited to ISO/IEC 17025-1999 to perform the following electromagnetic exposure tests: System Validation & Interlaboratory Comparison Simulated Tissue Specifications and Procedure EME Cellular Phone Testing Procedure On the following types of products: Wireless Communications Devices (Examples): Two Way Radios; Portable Phones (including Cellular, Licensed Non-Broadcast and PCS); Low Frequency Readers; and Pagers A2LA certificate #1651-01 Statement of Compliance: Motorola declares under its sole responsibility that portable cellular telephone FCC ID IHDT56CN1 to which this declaration relates, is in conformity with the appropriate General Population/Uncontrolled RF exposure standards, recommendations and guidelines (FCC 47 CFR §2.1093). It also declares that the product was tested in accordance with the appropriate measurement standards, guidelines and recommended practices. Any deviations from these standards, guidelines and recommended practices are noted below: (none) ©Motorola, Inc. 2002 This test report shall not be reproduced except in full, without written approval of the laboratory. The results and statements contained herein relate only to the items tested. The names of individuals involved may be mentioned only in connection with the statements or results from this report. Motorola encourages all feedback, both positive and negative, on this test report. APPLICANT: MOTOROLA, INC. FCC ID: IHDT56CN1 E E x x h h i i b b i i t t 1 1 1 1 P P a a g g e e 2 2 Table of Contents 1) Introduction 3 2) Description of the Device Under Test 3 Antenna description 3 Device description 3 3) Test Equipment 3 3.1 Dosimetric system 3 3.2 Additional equipment used 4 4) Electrical parameters of the tissue simulating liquid 4 5) System Accuracy Verification 4 6) Test Results 5 6.1 Head Adjacent Test Results 5 6.2 Body-Worn Test Results 7 References: Appendix 1: SAR distribution comparison for the system accuracy verification 9 Appendix 2: SAR distribution plots for Phantom Head Adjacent Use 10 Appendix 3: SAR distribution plots for Body Worn Configuration 12 Appendix 4. Probe Calibration Certificate 14 Appendix 5. Dipole Characterization Certificate 15 Appendix 6: Measurement Uncertainty Budget 16 Appendix 7. Photographs of the device under test 19 APPLICANT: MOTOROLA, INC. FCC ID: IHDT56CN1 E E x x h h i i b b i i t t 1 1 1 1 P P a a g g e e 3 3 1. Introduction The Motorola Personal Communications Sector Product Safety Laboratory has performed measurements of the maximum potential exposure to the user of portable cellular phone (FCC ID IHDT56CN1). The Specific Absorption Rate (SAR) of this product was measured. The portable cellular phone was tested in accordance with FCC OET Bulletin 65 Supplement C 01-01. 2. Description of the Device Under Test Antenna description Type External Location Upper Left Length 10mm Dimensions Width 8.5mm Configuration Helix Device description FCC ID Number IHDT56CN1 Serial number 86B0019 Mode(s) of Operation EGSM900 GSM 1800 GSM 1900 UMTS BlueTooth Modulation Mode(s) GSM GSM GSM WCDMA BlueTooth Maximum Output Power Setting 32.50dBm 30.00dBm 30.00dBm 22.00dBm 0dBm Duty Cycle 1:8 1:8 1:8 1:1 Transmitting Frequency Rang(s) 880.2- 914.8MHz 1710.2- 1784.8MHz 1850.2- 1909.8MHz 1920.3- 1979.7MHz 2400.0- 2483.5MHz Production Unit or Identical Prototype (47 CFR §2..908) Identical Prototype Device Category Portable RF Exposure Limits General Population / Uncontrolled 3. Test Equipment Used 3.1 Dosimetric System The Motorola Personal Communications Sector Product Safety & Compliance Laboratory utilizes a Dosimetric Assessment System (Dasy3™ v3.1d) manufactured by Schmid & Partner Engineering AG (SPEAG™), of Zurich Switzerland. The overall RSS uncertainty of the measurement system is ±11.7% (K=1) with an expanded uncertainty of ±23.0% (K=2). The measurement uncertainty budget is given in Appendix 6. Per IEEE 1528, this uncertainty budget is applicable to the SAR range of 0.4 W/kg to 10 W/kg. The list of calibrated equipment used for the measurements is shown below. Description Serial Number Cal Due Date DASY3 DAE V1 SN367 26-Aug-03 E-Field Probe ETDV6 SN1514 25-Jul-03 Dipole Validation Kit, DV1800V2 SN258TR 24-Sep-04 S.A.M. Phantom used for 1900MHz TP-1133 APPLICANT: MOTOROLA, INC. FCC ID: IHDT56CN1 E E x x h h i i b b i i t t 1 1 1 1 P P a a g g e e 4 4 3.2 Additional Equipment Description Serial Number Cal Due Date Signal Generator HP8648C 3847A04845 5-Nov-04 Power Meter E4419B GB39511086 6-Feb-04 Power Sensor #1 – 8481A US37296471 5-Nov-03 Power Sensor #2 - 8481A US37296473 5-Nov-03 Network Analyzer HP8753ES US39250622 2-May-03 Dielectric Probe Kit HP85070B 594146-01 N/A 4. Electrical parameters of the tissue simulating liquid Prior to conducting SAR measurements, the relative permittivity, ε r , and the conductivity, σ, of the tissue simulating liquids were measured with the HP85070 Dielectric Probe Kit These values, along with the temperature of the tissue simulate are shown in the table below. The recommended limits for maximum permittivity and minimum conductivity are also shown. These come from the Federal Communication Commission, OET Bulletin 65 Supplement C 01-01. It is seen that the measured parameters are satisfactory for compliance testing. Dielectric Parameters f (MHz) Tissue type Limits / Measured ε r σ (S/m) Temp (°C) Measured, 14-Feb-03 38.4 1.46 Head Recommended Limits 40.0 1.40 18-25 Measured, 17-Feb-03 52.2 1.57 1880 Body Recommended Limits 53.3 1.52 18-25 The list of ingredients and the percent composition used for the tissue simulates ar…

Text truncated - open the document above for the full version.

Date: March 12, 2003 Subject: Request for additional information FCC ID: IHDT56CN1 Class II Permissive Change Reference: Logged-In Date:2/20/2003 Correspondence Reference Number:230227B.IHD Confirmation Number:TC3046 Date of Original Email:02/27/2003 Prepared by: Andrew Bachler, Principal Staff Engineer Motorola Personal Communications Sector Libertyville, Illinois Summary of FCC request for additional information 1) Please confirm this application(s) is for a composite device filing with two separate applications under one FCC ID for Part 24E (1900 GSM)and Part 15C (Bluetooth). Response: No, Bluetooth functionality has been removed from this equipment. Please refer to the updated cover letter, CN-EX13A, which specifies 1900 GSM only. 2) Please address the RF exposure evaluation when both the PCS and Bluetooth functions simultaneously transmitting. Please provide SAR test data (head and body), if necessary. Response:. Bluetooth functionality has been removed. Simultaneous transmitting is no longer applicable. 3) Please confirm whether the EMC spurious emission measurements (Part 24) were performed using substitution method. Please retest, as necessary. Response: : Yes, the substitution method was used. Please refer to 4.4.2.2 of exhibit 6A. 4) Please amend the users manual (page 8) indicating the frequency range and power levels. Response: The “Safety and General Information” section of the manual has been updated. Please refer to Exhibit 8A (CN-EX08A,pdf). 5) Please detail how the speaker phone mode could be used in a portable configuration. Is the phone expected to be used in a "held to face" position? If so, please provide SAR data accordingly. Response: Speaker mode allows hands-free operation of the phone. In addition, speaker mode is activated during video mode; allowing arms-length viewing of the display. “Held-to- face” positioning is not applicable to speaker mode operation. 6) Please provide the full list of accessories to be made available for this device. Response: Anticipated accessories include:
SPN5109A Desktop Charger
SPN5049A Rapid Travel Charger
SYN7818A Vehicle Power Adapter
Several versions of headsets
Memory Cards: 32MB, 64MB, & !28MB

APPLICANT: MOTOROLA, INC.FCC ID: IHDT56CN1 EXHIBIT 6A FCC PART 24 TRANSMITTER The test report for the FCC Part 24 transmitter follows:

APPLICANT: MOTOROLA INC FCC ID: IHDT56CN1 Exhibit 6C1 FREQUENCY STABILITY CFR Part 2.1055, 24.235 Measurement Procedure The equipment under test is placed in an environmental chamber. The antenna port of the Equipment Under Test is directly coupled to the input of the measurement equipment through a specialized RF connector. A power supply is attached as the primary voltage supply. Frequency measurements are made at the extremes of the temperature range -30º C to +60º C and at intervals of 10º C with the primary supply voltage set to the nominal battery operating voltage. A period of time sufficient to stabilize all components of the equipment is allowed at each frequency measurement. The maximum variation of frequency is measured. At room temperature, the primary supply voltage is reduced to the battery operating endpoint of the equipment under test. The maximum variation of frequency is measured. Measurement Results Attached APPLICANT: MOTOROLA INC FCC ID: IHDT56CN1 Exhibit 6C2 Measurement Results Modulation: GSM 1900 Frequency Stability Mode: GSM 1900 Operating Frequency: 1880.0 MHz Channel: 661 Deviation Limit (PPM): 0.1ppm Temperature Frequency Error Frequency Error VoltageVoltage CHZ(PPM) (%)(VDC) -30 C-43.00-0.023 100%3.80 -20 C-38.00-0.020 100%3.80 -10 C-48.00-0.026 100%3.80 0 C-34.50-0.018 100%3.80 10 C-47.10-0.025 100%3.80 20 C-74.30-0.040 100%3.80 30 C-69.80-0.037 100%3.80 40 C-64.70-0.034 100%3.80 50 C-56.10-0.030 100%3.80 60 C-47.10-0.025 100%3.80 20 C -55.40-0.029 Battery Endpoint3.25 Frequency Stability vs. Temperature -0.20 -0.15 -0.10 -0.05 0.00 0.05 0.10 0.15 0.20 -30 C-20 C-10 C0 C10 C20 C30 C40 C50 C60 C Temperature (Degrees Celsius)