IHDT6BE1Portable Cellular Transceiver

APPLICANT: MOTOROLA, INC.FCC ID: IHDT6BE1 EXHIBIT 8 INSTRUCTION MANUAL A preliminary draft copy of the Users Manual follows: 1 welcome Congratulations on your purchase of a mobile phone from Motorola, the world leader in wireless technology. Motorola phones are packed with features that put you in control and give you unrivalled power, while remaining discrete. control Customizable Quick Access Menu Place nine of your most frequently used features in your own personal menu so they can be accessed with just two key presses. Voice Dialing Use voice commands to call up Phone Book entries. discretion VibraCall™ Alert When you don’t want your phone to ring, your phone can vibrate to alert you of a call. Stop Call Alert Press E when the phone is ringing or vibrating to stop the alert without answering the call. power Superb Battery Performance Your phone is capable of several hours of conversation or several days standby. Phone Book $ • ¶ ß ® ™ ø œ ≈ Messages SMS Chat GameTools Settings Ring Tones Recent Calls main menu wheel For details, see “using menus” on page 13 or “menu index” on page 31. π Internet welcome 2 MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off.All other product or service names are the property of their respective owners. © 2001 Motorola, Inc. All rights reserved. Printed in the U.S.A. Manual number: Cover number: Software Copyright Notice The Motorola products described in this manual may include copyrighted Motorola and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the Motorola products may not be modified, reverse- engineered, distributed, or reproduced in any manner to the extent allowed by law. Furthermore, the purchase of the Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product. 1 contents 1 safety 1 2 about your phone 6 2.1 keys and display 6 2.2 battery 7 2.3 your SIM card 8 2.4 convertible covers 9 2.5 using this manual 10 3 basic tasks 11 3.1 switching the phone on 11 3.2 making a phone call 11 3.3 receiving a phone call 12 3.4 locking the keypad 12 3.5 checking voicemail 12 3.6 personalizing your phone 12 3.7 using menus 13 4 phone calls 14 4.1 making a phone call 14 4.2 receiving a phone call 15 4.3 receiving a second call 15 4.4 using the in-call menu 16 5 phone book 17 5.1 adding an entry 17 5.2 using an entry 17 5.3 using voice dial 18 5.4 using a call group 18 6 messages 19 6.1 reading a message 19 6.2 creating a message 20 6.3 entering text 20 contents 2 7 internet 22 8 chat 23 8.1 starting a chat session 23 8.2 responding to chat 24 8.3 reviewing a chat session 24 9 game 25 9.1 bricks 25 10 tools 26 10.1 using a reminder 26 10.2 calculating/converting 27 11 ring tones 28 11.1 changing your ring 28 12 recent calls 29 12.1 viewing recent calls 29 12.2 viewing call time/cost 30 13 menu index 31 •phone book menu 32 ≈messages menu 33 πinternet 35 øsms chat menu 36 œgame menu 36 ™tools menu 36 ®settings menu 37 ßring tones menu 40 ¶recent calls menu 41 14 accessories 43 15 what to do if... 44 16 FDA update 46 17 warranty 54 18 safety tips 61 1 1 safety IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION READ THIS INFORMATION BEFORE USING YOUR PHONE RF Operational Characteristics Your phone contains a transmitter and a receiver. When it is ON, it receives and transmits radio frequency (RF) energy. The phone operates in the frequency of 1900 MHz and employs digital modulation techniques. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits. The output power level typically may vary over a range from 1 mW to 2 watts. Exposure To Radio Frequency Energy Your Motorola phone is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy: • United States Federal Communications Commission, Code of Federal Regulations; 47 CFR part 2 sub-part J • American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992 • Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition • National Council on Radiation Protection and Measurements (NCRP) of the United States, Report 86, 1986 • International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998 • National Radiological Protection Board of the United Kingdom 1995 safety 1 2 • Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999 • Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 1999 (applicable to wireless phones only) To assure optimal phone performance and make sure human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above standards, always adhere to the following procedures: PORTABLE PHONE OPERATION AND EME EXPOSURE Antenna Care Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the phone and may violate FCC regulations. DO NOT hold the antenna when the phone is “IN USE”. Holding the antenna affects call quality and may cause the phone to operate at a higher power level than needed. Phone Operation When placing or…

Text truncated - open the document above for the full version.

APPLICANT: MOTOROLA, INC.FCC ID: IHDT6BE1 EXHIBIT 2 ATTESTATION STATEMENTS The transceiver of type IHDT6BE1 has been tested in accordance with the requirements contained in the appropriate Commission regulations. To the best of my knowledge, these tests were performed using measurement procedures consistent with industry or Commission standards and demonstrate that this equipment complies with the appropriate standards. Each unit manufactured imported or marketed, will conform to the sample tested within the variations that can be expected due to quantity production and testing on a statistical basis. I further certify that the necessary measurements were made at Motorola’s EMC Lab, located at 1500 Gateway Boulevard, Boynton Beach, Florida 33426. NAME: KEVIN FREISEN TITLE: ENGINEERING RESOURCE MANAGER, TPRG Date: May 31, 2001 I hereby certify that the above application was prepared under my direction and that to the best of my knowledge and belief, the facts set forth in this application and accompanying technical data are true and correct. NAME: Ed Kovach TITLE: Engineering MANAGER PCS Development Date: May 31, 2001 The technical data supplied with this application was taken under my supervision and is hereby duly certified. I also certify that this transmit equipment (FCC ID: IHDT6BE1) is in compliance with all applicable parts of the FCC Rules .: NAME: Michael Sailsman TITLE: Senior RF Project Designer PCS Development Date: May 31, 2001

APPLICANT: MOTOROLAFCC ID: IHDT6BE1 Exhibit 13 June 4, 2001 CONFIDENTIALITY REQUEST CONTAINED WITHIN Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Application for Cellular/PCS Transceiver Certification Gentlemen: Application: Motorola, Inc., Personal Communications Sector, 600 N. U.S. Highway 45, Libertyville, Illinois 60048-1286 herein submits: Application for Equipment Authorization (FCC Form 731-October 1992 with integrated Fee Processing Form, Fee Codes EFT and EBC), application fee in the amount of $640, and Exhibits; for Certification of a PCS Transceiver, FCC ID: IHDT6BE1. Motorola is also the manufacturer of this equipment. Confidentiality: Pursuant to Section 0.459 of the Commission's rules (CFR 47), Motorola requests confidentiality for portions of the material contained in this application and that the identified material be withheld from public inspection following the grant of this authorization. This material contains Motorola's trade secrets and confidential information that Motorola does not customarily release to the public and which is otherwise not generally available to the public. Confidentiality is requested for the following exhibits: • Exhibit 4 Block Diagrams • Exhibit 5 Schematics • Exhibit 12 Operational Description Description: This equipment is a GSM portable transceiver, which operates in the 1900 MHz PCS band Contact Information: Please contact me by telephone at (847) 523-6167, or by e-mail ([email protected]), if there are questions or additional information needed concerning this filing. Regards, Andrew J. Bachler FCC Liaison Cellular Subscriber Sector 600 N. U.S. Highway 45 Libertyville, IL 60048-5343

APPLICANT: MOTOROLA, INC.FCC ID : IHDT6BE1 EXHIBIT 1 FCC IDENTIFICATION (NAMEPLATE) INFORMATION The FCC label shown is representative of the label that will appear on the radio when in production. It will be placed on the radio telephone as shown in Exhibit 3. Other information may also be included on this label. FCC ID: IHDT6BE1

APPLICANT: MOTOROLA, INC.FCC ID: IHDT6BE1 EXHIBIT 10 TRANSCEIVER ADJUSTMENTS/TUNE-UP PROCEDURE There are no user accessible adjustments or tuning in this portable cellular transceiver. All necessary adjustments and tuning are performed during manufacture of the product. Any adjustments or tuning after service or repair are done as part of that process as special equipment is required to perform such adjustments.

APPLICANT: MOTOROLA, INC. FCC ID: IHDT6BE1 E E x x h h i i b b i i t t 1 1 1 1 Exhibit 11: SAR Test Report: IHDT6BE1 Date of test: 5/30 – 5/31/2001 Laboratory: Motorola Personal Communications Sector Product Safety Laboratory 2001 N. Division Room: AS228 Harvard, Illinois 60033 Test Responsible: Steven Hauswirth Staff Engineer Accreditation: ISO Guide 25 Accredited Lab, A2LA certificate #1651-01 Statement of Compliance: Motorola declares under its sole responsibility that portable cellular telephone FCC ID IHDT6BE1 to which this declaration relates, is in conformity with the appropriate RF exposure standards, recommendations and guidelines. It also declares that the product was tested in accordance with the appropriate measurement standards, guidelines and recommended practices. Any deviations from these standards, guidelines and recommended practices are noted below: ©Motorola This test report shall not be reproduced in full, without written approval of the laboratory. The results and statements contained herein relate only to the items tested. The names of individuals involved may be mentioned only in connection with the statements or results from this report. Motorola encourages all feedback, both positive and negative, on this test report. APPLICANT: MOTOROLA, INC. FCC ID: IHDT6BE1 E E x x h h i i b b i i t t 1 1 1 1 P P a a g g e e 2 2 Table of Contents 1) Introduction 3 2) Description of the Device Under Test 3 Antenna description 3 Device description 3 3) Test Results 3 4) Test Equipment 4 4.1 Dosimetric system 4 4.2 Additional equipment used 5 5) Electrical parameters of the tissue simulating liquid 5 6) System Accuracy Verification 5 Reference Notes Appendix 1: SAR distribution comparison for the system accuracy verification 6 Appendix 2: SAR distribution plots for Phantom Head Adjacent Use 7 Appendix 3: SAR distribution plots for Body Worn Configuration 8 Appendix 4: Photographs of the device under test 9 APPLICANT: MOTOROLA, INC. FCC ID: IHDT6BE1 E E x x h h i i b b i i t t 1 1 1 1 P P a a g g e e 3 3 1. Introduction The Motorola Personal Communications Sector Product Safety Laboratory has performed measurements of the maximum potential exposure to the user of portable cellular phone FCC ID IHDT6BE1. The Specific Absorption Rate (SAR) of this product was measured. The portable cellular phone was tested in accordance with the latest available test guidelines. The SAR values found for the portable cellular phone (FCC ID IHDT6BE1) are below the maximum recommended levels of 1.6 W/kg. Detailed procedures of the test are described in the Motorola Exhibit 11 Reference SAR Test Report. 2. Description of the Device Under Test Antenna description Type Internal Location Back of Phone Device description FCC ID Number IHDT6BE1 Serial number 300501A Mode(s) of Operation GSM1900 Modulation Mode(s) GSM Maximum Output Power Setting 30.0dBm Duty Cycle 1:8 Transmitting Frequency Rang(s) 1850-1910MHz 3. Test Results The SAR results shown in tables 1 and 2 are maximum SAR values averaged over 1 gram of phantom tissue. Also shown are the measured conducted output powers and the temperature of the test facility during the test. The test sample was operated in a test mode that allows control of the transmitter without the need to place actual phone calls. For the purposes of this test the unit is commanded to test mode and manually set to the proper channel, transmitter power level and transmit mode of operation. The phone was then placed in the SAR measurement system with a fully charged battery. A full data set output of the test conditions with the highest SAR values from the Dasy measurement system is included as appendix 2 and 3. The test conditions included are indicated as bold numbers in the following table. All other test conditions measured lower SAR values than those included. APPLICANT: MOTOROLA, INC. FCC ID: IHDT6BE1 E E x x h h i i b b i i t t 1 1 1 1 P P a a g g e e 4 4 SAR, 1g (W/kg) Left Head Right Head f (MHz) Description Conducted Output Power (dBm) Channel 512 30.18 0.62 0.58 Channel 661 30.18 0.58 0.53 Digital 1900MHz Channel 810 30.19 0.57 0.50 Table 1: SAR measurement results for the portable cellular telephone FCC ID IHDT6BE1 at highest possible output power. Measured against the head. SAR, 1g (W/kg) Carry Case f (MHz) Description Conducted Output Power (dBm) Channel 512 30.18 0.64 Channel 661 30.18 0.50 Digital 1900MHz Channel 810 30.19 0.40 Table 2: SAR measurement results for the portable cellular telephone FCC ID IHDT6BE1 at highest possible output power. Measured against the body. 4. Test Equipment Used 4.1 Dosimetric System The Motorola Personal Communications Sector Product Safety Laboratory utilizes a Dosimetric Assessment System (Dasy3™) SAR measurement system manufactured by Schmid & Partner Engineering AG (SPEAG™), of Zurich Switzerland. The overall RSS uncertainty of the measurement system is ±12.0% (K=1). Description Serial Number Cal Due Date DASY3 DAE3 SN398 8/28/01 E-Field Probe ETDV6 SN1503 10/06/01 Dipole Validation Kit, DV1800V2 SN280 1/4/03 4.2 Additional Equipment Description Serial Number Cal Due Date Signal Generator HP8648C 3847A04848 1/19/03 Power Meter E4419B US39250622 10/4/01 Power Sensor E9301A US39210915 11/28/01 APPLICANT: MOTOROLA, INC. FCC ID: IHDT6BE1 E E x x h h i i b b i i t t 1 1 1 1 P P a a g g e e 5 5 5. Electrical parameters of the tissue simulating liquid Prior to conducting SAR measurements, the relative permittivity, ε r , and the conductivity, σ, of the tissue simulating liquids were measured with HP85070 Dielectric Probe Kit These values are shown in the table below. The mass density, ρ, used by the dosimetric system is also given. Recommended limits for maximum permittivity, minimum conductivity and maximum mass density are also shown. These come from the Federal Communication Commission, “Tissue Dielectric Properties” web site at http://www.fcc.gov/fcc-bin/dielec.sh . It is seen that the measured parameters are satisfactory for …

Text truncated - open the document above for the full version.

APPLICANT: MOTOROLA, INC.FCC ID: IHDT6BE1 Test Report Number: 3091-2 1 EXHIBIT 6 PERSONAL COMMUNICATIONS SECTOR PRODUCT SAFETY AND COMPLIANCE EMC LABORATORY EMC TEST REPORT FCC ID IHDT6BE1 FCC Exhibit 6 APPLICANT: MOTOROLA, INC.FCC ID: IHDT6BE1 Test Report Number: 3091-2 2 EXHIBIT 6 Test Report Details Tests Performed By:Motorola Personal Communications Sector Product Safety and Compliance Group 1500 Gateway Boulevard Boynton Beach, FL 33426 Test Report Number:3091-2 Test Report Date:May 31, 2001 Product Type:Cellular Phone Signaling Capability:GSM 1900 Model Number:AAUG1239AA Received Date:May 23, 2001 Testing Start Date:May 24, 2001 Testing Complete Date:May 30, 2001 Summary of Testing All tests and measurements indicated in this document were performed in accordance with the Code of Federal Regulations Title 47 Part 2, Sub-part J as well as the following parts: X Part 15 Subpart B – Unintentional Radiators Part 22 Subpart H - Public Mobile Services X Part 24 - Personal Communications Services Part 90 - Private Land Mobile Radio Service Test Test Name Comply Does Not # Comply 1RF Power OutputX 2Occupied BandwidthX 3Spurious Emissions at Antenna TerminalX 4Field Strength of Spurious EmissionsX 5Frequency StabilityX 6Receiver Radiated EmissionsX APPLICANT: MOTOROLA, INC.FCC ID: IHDT6BE1 Test Report Number: 3091-2 3 EXHIBIT 6 Introduction All measurements contained in this report were performed at the Motorola Inc. Product Safety and Compliance EMC Laboratory located at 1500 Gateway Boulevard, Boynton Beach, FL 33426. The FCC and Industry Canada recognize this measurement facility as a valid test site. Physical Description of Test Facility Shielded Enclosure The EMC radiated test facility consists of a 3-meter semi-anechoic shielded enclosure. The interior shield to shield dimensions of the indoor semi-anechoic chamber are approximately 28 feet long by 20 feet wide by 17 feet 10 inches high. Turntable and Ground Plane The turntable is an electrically driven EMCO model 2088-1.53 with a 1.5 m diameter metal top and is capable of supporting 2200 lbs. An EMCO Model 2090 Multi-device Controller controls the turntable rotation with IEEE-488 data/control for automation. The chamber’s 6 inch raised ground plane consists of a continuous metallic surface with a vinyl top finish. Antenna Mast An EMCO Model 2071-2 electrically powered, air-polarized, antenna tower mast is used. It also is controlled by an EMCO Model 2090 Multi-device Controller with IEEE-488 data/control for automation. Control Area The control area is a RF shield enclosure attached to the semi-anechoic chamber with a connector panel for RF, fiber optic and control cables. Quiet Zone and Test Range The quiet zone for the 3m test range is a cylinder two (2) meters in diameter per volumetric quiet zone testing requirements specified in ANSI C63.4 1992. APPLICANT: MOTOROLA, INC.FCC ID: IHDT6BE1 Test Report Number: 3091-2 4 EXHIBIT 6 Measuring Equipment and Calibration Information ManufacturerItemItem Version/Serial CALIBRATION NameNameModel #NumberDUE DATE Description Rohde & SchwarzEMI Test ReceiverESI26 838386/010 2/28/2002 Hewlett PackardEMC Analyzer8593EM US40240219 8/7/2001 Hewlett PackardEMC Analyzer8593EM3536A0011810/12/2001 Hewlett PackardRF Amplifier8347A3307A012257/10/2001 Hewlett PackardPre-Amplifier8449B3008A005357/10/2001 A.H. Systems Inc.DRG Horn AntennaSAS-200/5712657/23/2001 A.H. Systems Inc.DRG Horn AntennaSAS-200/57136510/26/2001 ChaseBilog AntennaCBL612110086/12/2001 ETSLog-Periodic Antenna3148118911/3/2003 ETSLog-Periodic Antenna3148118811/3/2003 ETSBiconical Antenna3110B336911/2/2003 ETSBiconical Antenna3110B337011/2/2003 EMCOLog-Periodic Antenna31479311-11246/22/2001 Hewlett PackardCDMA Mobile Test SetE8285AUS3922060110/15/2001 Hewlett PackardTDMA Mobile Test Set8920BUS392253701/24/2002 Hewlett PackardTDMA Cellular Adaptor83206AUS394022341/24/2002 Hewlett PackardGSM Mobile Test Set8922M 3639U01033 4/10/2002 Hewlett PackardGSM DCS/PCS RF Interface83220E 3639U01057 4/12/2002 Hewlett Packard Signal Generator 83623B 3844A00935 6/26/2001 Hewlett Packard Signal Generator 83623B 3844A01195 7/9/2001 ThermotronEnvironmental ChamberS-43158012/20/2001 Does not include measurement equipment required for RF Power Output Test. APPLICANT: MOTOROLA, INC.FCC ID: IHDT6BE1 Test Report Number: 3091-2 5 EXHIBIT 6 CONDUCTED RF POWER OUTPUT Measurement Procedure The RF output port of the equipment under test is directly coupled to the input of a HPE4406A Vector Signal Analyzer through a 10dB passive attenuator, adaptor (if needed), and specialized RF connector. The peak power output is measured for all channels. Measurement Results GSM 1900 Frequency (MHz) Power (dBm) 1850.230.18 1880.030.18 1909.830.19 APPLICANT: MOTOROLA, INC.FCC ID: IHDT6BE1 Test Report Number: 3091-2 6 EXHIBIT 6 RADIATED (EIRP) Measurement Procedure The phone was tested in a 16' cubical anechoic chamber with a 2-axis position system that permits taking complete spherical scans of the AUT's radiation patterns. For all tests, the phone was supported in a free-space type environment, vertically oriented in the chamber. Tests were done on three PCS frequencies (1850.2, 1880.0 and 1909.8 Mhz). GSM measurements were made with the phone placed in a call using the HP8922M mobile station test set. The phone was weakly coupled to the test set and configured to transmit in full data rate mode. Radiated power was measured at every 15 degree step. The radiated power was measured using a Gigatronics 8542C power meter in "Burst Avg" mode. From these measurements, the software calculates the angle at which maximum radiated power occurs for each case, and the radiated power at this angle was extracted from the data. The max radiated power results for IHDT6BE1 follows, as EIRP in dBm. To get ERP (effective radiated power referenced to a half-wave dipole), subtract 2.1 dB from these numbers. Measurement Results PCS 1900: 1850.2 MHz:29.9 dBm 1880.0 MHz:29.8 dBm 1909.8 MHz 29.7 dBm For a…

Text truncated - open the document above for the full version.