IKQBTSPK3Scosche BOOM STREAM MINI

FCC NOTE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID AND CHANGE ANNTENA WHICH THE MANUFACTURER PROVIDES. IT IS THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi dential installation. This equipment generates, uses and can radiate radio frequenc y energy and, if not installed and used in accordance with the in structions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular insta llation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to corr ect the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experien ced radio/TV technician for help. To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Scosche Industries, Inc. Date: Dec 08, 2013 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: IKQBTSPK3 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Schematics SCH.pdf Block Diagram BlockDiagram.pdf Operational Description CircuitDescription.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ............................................................... Signature Peter Butcher /VP,Operations .................................................................................... [typed name and title] Scosche Industries Inc . 1550 Pacific Ave, Oxnard,CA

Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: Dec 08, 2013 SUBJECT: FCC Application for (FCC ID: IKQBTSPK3) To Whom It May Concern: I, the undersigned, hereby attest to the fact that I will apply the Declaration of Conformity procedure to the class B computer peripheral portion of this composite device. I understand the following FCC requirements: 1. Devices subject to the DoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the "accredited" option to search for FCC recognized accredited test firms.) 2. Test facilities located in countries, where the U.S. does not have an operational Telcom MRA are not recognized by the FCC to test for the DoC procedure. 3. Pt 2.1077 contains the list of information that must be included in the Declaration of Conformity, which must be supplied with each product sold. The DoC compliance info shall be included in the User’s Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(c)(2), the responsible party is either the Manufacturer or if the product is imported the Importer. Regards, Signature: Peter Butcher /VP, Operations .................................................................................... [typed name and title] Scosche Industries Inc . 1550 Pacific Ave, Oxnard,CA

Scosche Industries, Inc. FCC ID: IKQBTSPK3 POWER OF ATTORNEY Date: Dec 08,2013 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) on our behalf shall have the same effect as acts of our own. This authorization expires on Dec 07,2014. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Scosche Industries, Inc., are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Signature: Peter Butcher /VP, Operations .................................................................................... [typed name and title] Scosche Industries Inc . 1550 Pacific Ave, Oxnard,CA

Reference No.: WTS13S1109073E Page 67 of 73 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 18 Photographs - Constructional Details 18.1 EUT – External View1. BTSPK3RD, BTSPK3W, BTSPK3BK, BTSPK3BL, BTSPK3 Reference No.: WTS13S1109073E Page 68 of 73 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Reference No.: WTS13S1109073E Page 69 of 73 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Reference No.: WTS13S1109073E Page 70 of 73 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

FCC Label Location for model: BTSPK3, BTSPK3BK, BTSPK3BL, BTSPK3W, BTSPK3RD The Label must not be a stick-on paper. The Label on these products must be permanently affixed to the product and readily visible at the time of purchase and must last the expected lifetime of the equipment not be readily detachable. Model No.: BTSPK3 FCC ID: IKQBTSPK3

FCC Label Sample for model: BTSPK3, BTSPK3BK, BTSPK3BL, BTSPK3W, BTSPK3RD FCC ID: IKQBTSPK3 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Reference No.: WTS13S1109073E Page 71 of 73 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 18.2 EUT – Internal View Reference No.: WTS13S1109073E Page 72 of 73 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn RF MODULE RF Antenna Reference No.: WTS13S1109073E Page 73 of 73 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn ================End of Test Report================

TEST REPORT Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Page 1 of 73 Reference No. : WTS13S1109073E FCC ID : IKQBTSPK3 Applicant : Scosche Industries, Inc. Address : 1550 Pacific Ave, Oxnard, CA Manufacturer : CCA ELECTRONIC FACTORY Address : 1-3F Building 120-121TH, PingHuan Industrial City, PingShan, LongGang, Shenzhen, China Equipment Under Test (EUT) : Product Name : Scosche BOOM STREAM MINI Model No. : BTSPK3, BTSPK3BK, BTSPK3BL, BTSPK3W, BTSPK3RD Brand Name : Scosche Standards : FCC CFR47 Part 15 C Section 15.247:2012 Date of Test : Nov 18~23, 2013 Date of Issue : Dec 11, 2013 Test Result : PASS Remark: * The sample described above has been tested to be in compliance with the requirements of ANSI C63.4:2003. The test results have been reviewed and comply with the rules listed above and found to meet their essential requirements. The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Services (Shenzhen) Co., Ltd. Address: 1/F., Fukangtai Building, West Baima Road, Songgang Street, Baoan District, Shenzhen, Guangdong, China Testing location: 1/F., Fukangtai Building, West Baima Road, Songgang Street, Baoan District, Shenzhen, Guangdong, China Tel :+86-755-83551033 Fax:+86-755-83552400 Compiled by: Approved by: Maikou Zhang / Project Engineer Philo Zhong / Manager Reference No.: WTS13S1109073E Page 2 of 73 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 2 Test Summary Test Items Test Requirement Result Conducted Emissions 15.207 PASS Spurious Radiated Emissions 15.205(a) 15.209 15.247(d) PASS Band edge Emissions 15.247(d) PASS Spurious RF Conducted Emissions 15.247(d) PASS 20dB Bandwidth 15.215c 15.247(a)(1) PASS Maximum Peak Output Power 15.247(b)(1) PASS Frequency Separation 15.247(a)(1) PASS Number of Hopping Frequency 15.247(a)(1)(iii) PASS Dwell time 15.247(a)(1)(iii) PASS Maximum Permissible Exposure (Exposure of Humans to RF Fields) 1.1307(b)(1) PASS Reference No.: WTS13S1109073E Page 3 of 73 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 3 Contents Page 1 COVER PAGE .......................................................................................................................................... 1 2 TEST SUMMARY................................................................................................................................................... 2 3 CONTENTS............................................................................................................................................................. 3 4 GENERAL INFORMATION.................................................................................................................................. 5 4.1 GENERAL DESCRIPTION OF E.U.T.................................................................................................................. 5 4.2 DETAILS OF E.U.T........................................................................................................................................... 5 4.3 CHANNEL LIST................................................................................................................................................. 5 4.4 TEST FACILITY................................................................................................................................................. 6 4.5 TEST LOCATION............................................................................................................................................... 6 4.6 GENERAL CONDITION...................................................................................................................................... 6 4.6.2 Test Mode.................................................................................................................................................6 5 EQUIPMENT USED DURING TEST................................................................................................................... 7 5.1 EQUIPMENTS LIST........................................................................................................................................... 7 5.2 MEASUREMENT UNCERTAINTY........................................................................................................................ 7 5.3 TEST EQUIPMENT CALIBRATION..................................................................................................................... 7 6 CONDUCTED EMISSION..................................................................................................................................... 8 2................................................................................................................................................................................ 8 3................................................................................................................................................................................ 8 4................................................................................................................................................................................ 8 5................................................................................................................................................................................ 8 6................................................................................................................................................................................ 8 6.1 E.U.T. OPERATION.......................................................................................................................................... 8 6.2 EUT SETUP..................................................................................................…

Text truncated - open the document above for the full version.

Reference No.: WTS13S1109073E Page 65 of 73 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 17 Photographs – Test Setup 17.1 Radiated Emissions Below 30MHz From 30-1000MHz Reference No.: WTS13S1109073E Page 66 of 73 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Above 1GHz