IKQFMTD9Personal FM Transmitter

FCC INFORMATION (additional) Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

Scosche Industries Inc FCC Confidentiality Request Number: CF303 Version: V03 Date: 25-11-2011 To: Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company nameShenzhen Sage Human Electronics Co., Ltd. Address4 floor,A9 bldg, Silicon Vellay Power, Qinghu Industry Park Longhua new district CityShenzhen, Guangdong CountryChina request for this certification filing under: Grantee CodeProduct Number FCC ID:IKQFMTD9 to maintain permanent confidentiality for the following documents submitted within this application: (please cross what is applicable, or add other documents, provide the file name and description) ExhibitFile NameDescription vOperational Descriptionexplaining the functioning of the block diagram vBlock Diagramsshowing the systematic building blocks of the EUT vSchematics Diagramsshowing components, their values and interconnection Above materials crossed contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. The documents indicated as confidential above, are not publicly available elsewhere. Attestation: City and Country:Date:Name: (this must be a person) Function:Signature: (or official company stamp) Enschede, Netherlands2014-08-25M. Koop (authorized) Manager

Scosche Industries Inc FCC ID:IKQFMTD9 IC No.:6955A- FMTD9 FCC Authorization Letter Number: CF304 Version: V03 Date: 01-08-2011 We, (the approval holder) Company name Scosche Industries Inc Address 1550 Pacific Ave, Oxnard, California 93033, United States. City California Country United States. declare that the following representative (agent): Name (person) Company name Shenzhen ISOTek Standards Technical Services Co.,Ltd. Address 13/F, HuaFengRui Building, XinHu Rd., XiXiang, Bao’an District, City Shenzhen Country China is hereby authorized to apply the following equipment for certification on our behalf: Product Description FM Transmitter Type or Model(s) FMTD9 Tradename or Brand(s) N/A We also authorize Teleconformity (Mr. M. Koop, Manager Certification, Address: Rietven 31, 7534NH Enschede, the Netherlands) to apply and sign this application for certification, registration or filing on our behalf (as representative agent or certifier). Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) California United States. 2014-8-17 Peter Butcher VP, Operations

2.1 EUT – External View(1) 2.2 EUT – External View(2) 2.3 EUT – External View(3) 2.4 EUT – External View(4)

FCC Label Location 2 FCC Label This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)this device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation. The Label must not be a stick-on paper. The Label on these products must be permanently affixed to the product and readily visible at the time of purchase and must last the expected lifetime of the equipment not be readily detachable. Proposed Label Location on EUT EUT Back View/ proposed FCC Label Location FCC ID: IKQFMTD9 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

2.1 EUT –Open View 2.2 EUT –Internal View(1) FM Ant. 2.3 EUT –Internal View(2) 2.4 EUT –Internal View(3) 2.5 EUT –Internal View(4)

Reference No.: ISOT14080678F Page 1 of 27 FCC TEST REPORT Shenzhen ISOTek Standards Technical Services Co.,Ltd. FCC ID:IKQFMTD9 Http://www.ISOTek.com.cn FCC ID : IKQFMTD9 Applicant : Scosche Industries Inc Address : 1550 Pacific Ave, Oxnard, California 93033, United States. Manufacturer : SHENZHEN SAGE HUMAN ELECTRONICS CO.,LTD. Address : 4 floor,A9 bldg, Silicon Vellay Power, Qinghu Industry Park Longhua, new district, Shenzhen, Guangdong,China Equipment Under Test (EUT) : Product Name : FM Transmitter Model No. : FMTD9 Brand Name : N/A Standards : FCC 15 Subpart C Paragraph 15.239 Date of Test : Aug.05~17, 2014 Date of Issue : Aug.17, 2014 Test Result : PASS Remark: * The sample described above has been tested to be in compliance with the requirements of ANSI C63.4:2003. The test results have been reviewed and comply with the rules listed above and found to meet their essential requirements. The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Shenzhen ISOTek Standards Technical Services Co.,Ltd. 13/F, HuaFengRui Building, XinHu Rd., XiXiang, Bao’an District,Shenzhen,China Tel: +86-755-23087378 Fax: +86-755-23087278 Compiled by: Approved by: Lisa Huang/ Project Engineer Richard Chen/ Manager Reference No.: ISOT14080678F Page 2 of 27 Shenzhen ISOTek Standards Technical Services Co.,Ltd. FCC ID: IKQFMTD9 Http://www.ISOTek.com.cn 2Test Summary Test items Test Requirement Test Method Result Radiated Emission (30MHz to 1GHz) FCC PART 15: 2010 FCC PART 15.209&15.239 PASS Conducted Emission (150KHz to 30MHz) FCC PART 15: 2010 FCC PART 15.207 PASS Occupied Bandwidth FCC PART 15: 2010 FCC PART 15.239a PASS Band Edge Measurement FCC PART 15: 2010 FCC PART 15.239a PASS Note : denote that for more details of the EUT , please refer to the relating test items as below . Remark : the methods of measurement in all the test items were according to ANSI C63.4: 2003. 3Support Units and Test Methods Support Equipment Shield/Unshield Length Remark Audio Cable UnShield 20cm N/A Remark: The audio test signal used is Rock music (chengcheng) played back from the MP3 player at volume of 90% ̈. Reference No.: ISOT14080678F Page 3 of 27 Shenzhen ISOTek Standards Technical Services Co.,Ltd. FCC ID: IKQFMTD9 Http://www.ISOTek.com.cn 4Contents Page 1COVER PAGE ........................................................................................................................................ 1 2TEST SUMMARY.................................................................................................................................................... 2 3SUPPORT UNITS AND TEST METHODS.......................................................................................................... 2 4CONTENTS.............................................................................................................................................................. 3 5GENERAL INFORMATION ................................................................................................................................... 5 5.1 G ENERAL DESCRIPTION OF E.U.T................................................................................................................... 5 5.2 D ETAILS OF E.U.T. ........................................................................................................................................... 5 5.3 D ESCRIPTION OF SUPPORT UNITS...................................................................................................................... 5 5.4 S TANDARDS APPLICABLE FOR TESTING............................................................................................................. 5 6 TEST LOCATION ................................................................................................................................................... 5 7EQUIPMENT USED DURING TEST.................................................................................................................... 6 7.1 E QUIPMENTS LIST............................................................................................................................................. 6 7.2 M EASUREMENT UNCERTAINTY......................................................................................................................... 6 7.3 T EST EQUIPMENT CALIBRATION....................................................................................................................... 6 8CONDUCTED EMISSION...................................................................................................................................... 7 8.1 E.U.T. O PERATION........................................................................................................................................... 7 8.2 EUT S ETUP....................................................................................................................................................... 7 8.3 C ONDUCTED EMISSION TEST RESULT............................................................................................................. 7 9SPURIOUS RADIATED EMISSIONS.................................................................................................................. 8 9.1 T EST EQUIPMENT.............................................................................................................................................. 8 9.2 M EASUREMENT UNCERTAINTY......................................................................................................................... 8 9.3 EUT S ETUP....................................................................................................................................................... 8 9.4 S PECTRUM ANALYZER SETUP.................…

Text truncated - open the document above for the full version.

Photographs – Test Setup Radiated Emissions Test Mode Audio Play Below 30MHz Test Mode Audio Play From 30-1000MHz Test Mode FM Transmitter From 30-1000MHz