IKQMPQ5AWireless Car Charger

Date Check Design Changing Description Zoning Edition Changing File NO 80g 80g MQ5WDV-1 Units mmφ Quantity 1φ Page 1 of 3 Revision0φ A Scaleφ Unsign Tolerance Angle 0.3° Linear Dimension Part Name: Adapt Product: Part Material: Technical Disposal: Tooling NO Part NO Drawing Number Design Check Approve Drawing A4 0<L 30 ±0.05 30<L 60 ±0.075 60<L 100 ±0.10 100<L±0.15 İ İ İ ASWC1500033C1501 3.2.1.5.008.0329 80g MQ5WDV-1 Date Check Design Changing Description Zoning Edition Changing File NO 80g Units mmφ Quantity 1φ Page 2 of 3 Revision0φ A Scaleφ Unsign Tolerance Angle 0.3° Linear Dimension Part Name: Adapt Product: Part Material: Technical Disposal: Tooling NO Part NO Drawing Number Design Check Approve Drawing A4 0<L 30 ±0.05 30<L 60 ±0.075 60<L 100 ±0.10 100<L±0.15 İ İ İ ASWC1500033C1501 3.2.1.5.008.0329

80g MQ5WDV-1 Date Check Design Changing Description Zoning Edition Changing File NO 80g Units mmφ Quantity 1φ Page 3 of 3 Revision0φ A Scaleφ Unsign Tolerance Angle 0.3° Linear Dimension Part Name: Adapt Product: Part Material: Technical Disposal: Tooling NO Part NO Drawing Number Design Check Approve Drawing A4 0<L 30 ±0.05 30<L 60 ±0.075 60<L 100 ±0.10 100<L±0.15 İ İ İ ASWC1500033C1501 3.2.1.5.008.0329

FCC Compliance StatementFCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.may cause undesired operation. Please note that changes or modifications to this product not expressly approved by the party responsible for compliance Please note that changes or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. - Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 15cm between the radiator & body.shall be installed and operated with minimum distance 15cm between the radiator & body. Canadian Compliance StatementCanadian Compliance Statement This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device.operation of the device. This Class [B] digital apparatus complies with Canadian ICES-003. This Class [B] digital apparatus complies with Canadian ICES-003. CAN ICES-003(B)/NMB-003(B)CAN ICES-003(B)/NMB-003(B) This wireless charger appartatus complies with Canadian RSS-216.This wireless charger appartatus complies with Canadian RSS-216. This equipment complies with IC exposure limits set This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 10cm forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 10cm between the radiator & body.between the radiator & body. Déclaration de conformité du CanadaDéclaration de conformité du Canada Cet appareil comporte un ou des transmetteurs/récepteurs exempts de licence Cet appareil comporte un ou des transmetteurs/récepteurs exempts de licence qui sont conformes avec les RSS exempts de licence d’Innovation, Science et qui sont conformes avec les RSS exempts de licence d’Innovation, Science et Développement économique Canada. Le fonctionnement est soumis à deux Développement économique Canada. Le fonctionnement est soumis à deux conditions suivantes: (1) cet appareil ne doit pas être causé par des interférences et conditions suivantes: (1) cet appareil ne doit pas être causé par des interférences et (2) cet appareil doit accepter toute interférence, y compris compensée susceptible de (2) cet appareil doit accepter toute interférence, y compris compensée susceptible de provoquer un fonctionnement non souhaité de l'appareil.provoquer un fonctionnement non souhaité de l'appareil. Cet appar…

Text truncated - open the document above for the full version.

July 21, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: IKQMPQ5A Product Name: Wireless Car Charger Model Name: MPQ5A, MPQ5AMPSPC-UB, MPQ5WD-XTSP, MPQ5DV-XTSP Scosche Industries Inc (“the applicant”) certifies that the equipment for which authorization is soughtis not“covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Mark Larson SR Product Manager Scosche Industries Inc Mailing: PO Box 2901, Oxnard, CA 93034 Corporate: 1550 Pacific Ave, Oxnard, CA 93033 t: 800.363.4490 f: 805.486.9996 www.scosche.com

July 21, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: IKQMPQ5A Product Name: Wireless Car Charger Model Name: MPQ5A, MPQ5AMPSPC-UB, M PQ5WD-XTSP, MPQ5DV-XTSP Scosche Industries Inc (“the applicant”) certifies that, as of this date of the filing of the application, the applicant is not identified on the Co vered List as an entity producing “covered” equipment. Sincerely, Mark Larson SR Product Manager Scosche Industries Inc Mailing: PO Box 2901, Oxnard, CA 93034 Corporate: 1550 Pacific Ave, Oxnard, CA 93033 t: 800.363.4490 f: 805.486.9996 www.scosche.com

July 21, 2023 Section 2.911(d)(7) USA Agent for Service of Process Company Name:Scosche Industries Inc Address:1550 Pacific Avenue, Oxnard, CA 93033 USA Product Name:Wireless Car Charger FCC ID:IKQMPQ5A Model: MPQ5A, MPQ5AMPSPC-UB, MPQ5WD-XTSP, MPQ5DV-XTSP 2.911(d)(7) USA Designated Agent for Service of Process We, Scosche Industries Inc designate Scosche Industries Inc NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent:We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation:We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent & Applicant Company name: Scosche Industries Inc Address: 1550 Pacific Ave, Oxnard, California 93033, United States FRN: 0012561791 Contact Name: Mark Larson Telephone No: 805-486-4450 Email: [email protected] Sincerely, Mark Larson SR Product Manager Scosche Industries Inc NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-communications-supply-chain-through-the Mailing: PO Box 2901, Oxnard, CA 93034 Corporate: 1550 Pacific Ave, Oxnard, CA 93033 t: 800.363.4490 f: 805.486.9996 www.scosche.com

Scosche Industries Inc 1550 Pacific Ave, Oxnard California 93033, United States Agent Authorization Company: Scosche Industries Inc Address: 1550 Pacific Ave, Oxnard California 93033, United States Product Name: Wireless Car Charger Model Number(s): MPQ5A, MPQ5AMPSPC-UB, MPQ5WD-XTSP, MPQ5DV-XTSP Product Description: Wireless Car Charger We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Jul. 04, 2023 Name: Mark Larson Title: SR Product Manager Company: Scosche Industries Inc

Scosche Industries Inc 1550 Pacific Ave, Oxnard California 93033, United States Jul. 04, 2023 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID: IKQMPQ5A Models: MPQ5A, MPQ5AMPSPC-UB, MPQ5WD-XTSP, MPQ5DV-XTSP To Whom It May Concern: We, The Scosche Industries Inc hereby declare that the model : MPQ5A is identical with the model : MPQ5AMPSPC-UB, MPQ5WD-XTSP, MPQ5DV-XTSP, except for model name and the accessories of wireless charger. Except for the different above, no other modification is performed. Sincerely, Scosche Industries Inc Signature: [Mark Larson, SR Product Manager]

July 21, 2023 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: IKQMPQ5A Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered proprietary information in the operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. ☒Schematic Diagram ☒Block Diagram ☒Operational Description Pursuant to Public Notice DA 04-1705 of the Commission's policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); ▢External Photos ▢Test Setup Photos ▢Internal Photos ▢User Manual ▢For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Mark Larson SR Product Manager Scosche Industries Inc Mailing: PO Box 2901, Oxnard, CA 93034 Corporate: 1550 Pacific Ave, Oxnard, CA 93033 t: 800.363.4490 f: 805.486.9996 www.scosche.com

Report No.: AGC12678220806AP03 Page 1 of 8 EXTERNAL PHOTOS WHOLE VIEW OF EUT(MPQ5A) WHOLE VIEW OF EUT(MPQ5AMPSPC-UB) Report No.: AGC12678220806AP03 Page 2 of 8 WHOLE VIEW OF EUT(MPQ5WD-XTSP) WHOLE VIEW OF EUT(MPQ5DV-XTSP) Report No.: AGC12678220806AP03 Page 3 of 8 TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: AGC12678220806AP03 Page 4 of 8 FRONT VIEW OF EUT BACK VIEW OF EUT Report No.: AGC12678220806AP03 Page 5 of 8 LEFT VIEW OF EUT RIGHT VIEW OF EUT Report No.: AGC12678220806AP03 Page 6 of 8 TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: AGC12678220806AP03 Page 7 of 8 FRONT VIEW OF EUT BACK VIEW OF EUT Report No.: AGC12678220806AP03 Page 8 of 8 LEFT VIEW OF EUT RIGHT VIEW OF EUT ****************************************End of Report****************************************

FCC ID Label Location 10mm*10mm FCC ID: IKQMPQ5A

Report No.: AGC12678220806AP03 Page 1 of 3 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Antenna Report No.: AGC12678220806AP03 Page 2 of 3 OPEN VIEW OF EUT (FIGURE 3) OPEN VIEW OF EUT (FIGURE 4) Report No.: AGC12678220806AP03 Page 3 of 3 INTERNAL VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 2) ****************************************End of Report****************************************

Page 1 of 12 RF Exposure Report Report No.: AGC12678220806FH01 FCC ID : IKQMPQ5A APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Wireless Car Charger BRAND NAME MODEL NAME : MPQ5A, MPQ5AMPSPC-UB, MPQ5WD-XTSP, MPQ5DV-XTSP APPLICANT : Scosche Industries Inc DATE OF ISSUE : Oct. 13, 2022 STANDARD(S) : KDB680106 D01 RF Exposure Wireless Charging Base App v03r01 REPORT VERSION : V 1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC12678220806FH01 Page 2 of 12 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Oct. 13, 2022 Valid Initial Release Report No.: AGC12678220806FH01 Page 3 of 12 TABLE OF CONTENTS 1. GENERAL INFORMATION .............................................................................................................................. 4 2. PRODUCT INFORMATION .............................................................................................................................. 5 2.1 PRODUCT TECHNICAL DESCRIPTION ................................................................................................ 5 2.2 TEST FREQUENCY LIST ........................................................................................................................ 5 3. TEST ENVIRONMENT ..................................................................................................................................... 6 3.1 ADDRESS OF THE TEST LABORATORY .............................................................................................. 6 3.2 TEST FACILITY ....................................................................................................................................... 6 3.3 ENVIRONMENTAL CONDITIONS........................................................................................................... 7 3.4 MEASUREMENT UNCERTAINTY .......................................................................................................... 7 3.5 LIST OF EQUIPMENTS USED ............................................................................................................... 7 4. EQUIPMENT USED IN TESTED SYSTEM ...................................................................................................... 8 5. DESCRIPTION OF TEST MODES ................................................................................................................... 8 6. RF EXPOSURE MEASUREMENT ................................................................................................................... 9 6.1 REFER EVALUATION METHOD ............................................................................................................. 9 6.2 TEST LIMITS ........................................................................................................................................... 9 6.3 MEASUREMENT SETUP ...................................................................................................................... 10 6.4 MEASUREMENT PROCEDURE ............................................................................................................ 11 6.5 MEASUREMENT RESULTS................................................................................................................... 11 APPENDIX I: PHOTOGRAPHS OF TEST SETUP ............................................................................................ 12 Report No.: AGC12678220806FH01 Page 4 of 12 1. GENERAL INFORMATION Applicant Scosche Industries Inc Address 1550 Pacific Ave, Oxnard California 93033, United States Manufacturer Scosche Industries Inc Address 1550 Pacific Ave, Oxnard California 93033, United States Factory Scosche Industries Inc Address 1550 Pacific Ave, Oxnard California 93033, United States Product Designation Wireless Car Charger Brand Name Test Model MPQ5A Series Model(s) MPQ5AMPSPC-UB, MPQ5WD-XTSP, MPQ5DV-XTSP Difference Description The series models are identical except for model name and the accessories of wireless charger. Deviation from Standard No any deviation from the test method Date of receipt of test item Sep. 05, 2022 Date of test Sep. 05, 2022 to Oct. 12, 2022 Test Result Pass Prepared By Bibo Zhang (Project Engineer) Oct. 13, 2022 Reviewed By Calvin Liu (Reviewer) Oct. 13, 2022 Approved By Max Zhang (Authorized Officer) Oct. 13, 2022 Report No.: AGC12678220806FH01 Page 5 of 12 2. PRODUCT INFORMATION 2.1 PRODUCT TECHNICAL DESCRIPTION Equipment Specification WPT Frequency Band 111-148kHz Operation Frequency 138.2kHz Hardware Version CPS8600-V0 Software Version 84F5 Modulation Type FSK Number of channels 1 Field Strength of Fundamental 67.31dBuV/m (Max) Antenna Designation Integrated coil antenna Antenna Gain 0dBi Wireless Charging Output Power 15W / 10W / 7.5W / 5W Wireless Charging Input Power DC 12V, 2A Adapter Information N/A 2.2 TEST FREQUENCY LIST Frequency Band Channel Number Test Frequency 111~148KHz 01 138.2kHz Report No.: AGC12678220806FH01 Page 6 of 12 3. TEST ENVIRONMENT 3.1 ADDRESS OF THE TEST LABORATORY Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 TEST FACILITY The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to be in compliance with CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements) for the Competence of Testing and Calibration Laboratories. A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to be in compliance with ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories a…

Text truncated - open the document above for the full version.

1.6（max） Backing 3M9448A Backing diameter diameter

Page 1 of 28 FCC Test Report Report No.: AGC12678220806FE10 FCC ID : IKQMPQ5A APPLICATION PURPOSE Original Equipment PRODUCT DESIGNATION : Wireless Car Charger BRAND NAME : MODEL NAME : MPQ5A, MPQ5AMPSPC-UB, MPQ5WD-XTSP, MPQ5DV-XTSP APPLICANT : Scosche Industries Inc DATE OF ISSUE : Oct. 13, 2022 STANDARD(S) : FCC Part 15 Subpart C REPORT VERSION : V 1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC12678220806FE10 Page 2 of 28 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Oct. 13, 2022 Valid Initial Release Report No.: AGC12678220806FE10 Page 3 of 28 TABLE OF CONTENTS 1. GENERAL INFORMATION .............................................................................................................................. 5 2. PRODUCT INFORMATION .............................................................................................................................. 6 2.1 PRODUCT TECHNICAL DESCRIPTION ................................................................................................ 6 2.2 TEST FREQUENCY LIST ........................................................................................................................ 6 2.3 RELATED SUBMITTAL(S) / GRANT (S) ................................................................................................. 7 2.4 TEST METHODOLOGY .......................................................................................................................... 7 2.5 SPECIAL ACCESSORIES ....................................................................................................................... 7 2.6 EQUIPMENT MODIFICATIONS .............................................................................................................. 7 2.7 ANTENNA REQUIREMENT .................................................................................................................... 7 3. TEST ENVIRONMENT ..................................................................................................................................... 8 3.1 ADDRESS OF THE TEST LABORATORY .............................................................................................. 8 3.2 TEST FACILITY ....................................................................................................................................... 8 3.3 ENVIRONMENTAL CONDITIONS........................................................................................................... 9 3.4 MEASUREMENT UNCERTAINTY .......................................................................................................... 9 3.5 LIST OF EQUIPMENTS USED ............................................................................................................. 10 4.SYSTEM TEST CONFIGURATION ................................................................................................................. 11 4.1 EUT CONFIGURATION ......................................................................................................................... 11 4.2 EUT EXERCISE ..................................................................................................................................... 11 4.3 CONFIGURATION OF TESTED SYSTEM ............................................................................................ 11 4.4 EQUIPMENT USED IN TESTED SYSTEM........................................................................................... 11 4.5 SUMMARY OF TEST RESULTS ........................................................................................................... 12 5. DESCRIPTION OF TEST MODES ................................................................................................................. 13 6. FIELD STRENGTH OF FUNDAMENTAL ...................................................................................................... 14 6.1 PROVISIONS APPLICABLE .................................................................................................................. 14 6.3 FIELD STRENGTH CALCULATION ...................................................................................................... 16 6.4 MEASUREMENT SETUP (BLOCK DIAGRAM OF CONFIGURATION) ............................................... 17 6.5 MEASUREMENT RESULTS.................................................................................................................. 18 7. 20 DB BANDWIDTH ....................................................................................................................................... 24 7.1 PROVISIONS APPLICABLE .................................................................................................................. 24 7.2 MEASUREMENT PROCEDURE ........................................................................................................... 24 7.3 MEASUREMENT SETUP (BLOCK DIAGRAM OF CONFIGURATION) ............................................... 24 7.4 MEASUREMENT RESULTS.................................................................................................................. 25 8. AC POWER LINE CONDUCTED EMISSION TEST ...................................................................................... 26 8.1 LIMITS OF LINE CONDUCTED EMISSION TEST ............................................................................... 26 8.2 MEASUREMENT SETUP (BLOCK DIAGRAM OF CONFIGURATION) ............................................... 26 Report No.: AGC12678220806FE10 Page 4 of 28 8.3 PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST .......................................... 27 8.4 FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST ........................................................ 27 8.5 MEASUREMENT RESULTS.................................................................................................................. 27 APPENDIX A: PHOTOGRAPHS OF TEST SETUP .........................................................…

Text truncated - open the document above for the full version.

Report No.: AGC12678220806AP02 Page 1 of 4 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 30MHz RADIATED EMISSION TEST SETUP BELOW 1GHz Report No.: AGC12678220806AP02 Page 2 of 4 RF HEALTH ASSESSMENT TEST PHOTOS H-Field & E-Field Strength_ Position A H-Field & E-Field Strength_ Position B Report No.: AGC12678220806AP02 Page 3 of 4 H-Field & E-Field Strength_ Position C H-Field & E-Field Strength_ Position D Report No.: AGC12678220806AP02 Page 4 of 4 H-Field & E-Field Strength_ Position E ****************************************End of Report*************************************