IKQPBQ5MS2Power bank

濧濻濼瀆澳濷濸瀉濼濶濸澳濶瀂瀀瀃濿濼濸瀆澳瀊濼瀇濻澳瀃濴瀅瀇澳濄濈澳瀂濹澳瀇濻濸澳濙濖濖澳濥瀈濿濸瀆濁澳濢瀃濸瀅濴瀇濼瀂瀁澳濼瀆澳瀆瀈濵濽濸濶瀇澳瀇瀂澳瀇濻濸澳濹瀂濿濿瀂瀊濼瀁濺澳瀇瀊瀂澳濶瀂瀁濷濼瀇濼瀂瀁瀆濍澳澻濄澼澳濧濻濼瀆澳濷濸瀉濼濶濸澳瀀濴瀌澳瀁瀂瀇澳濶濴瀈瀆濸澳濻濴瀅瀀濹瀈濿澳濼瀁瀇濸瀅濹濸瀅濸瀁濶濸澿澳濴瀁濷澳澻濅澼澳瀇濻濼瀆澳濷濸瀉濼濶濸澳瀀瀈瀆瀇澳濴濶濶濸瀃瀇澳濴瀁瀌澳濼瀁瀇濸瀅濹濸瀅濸瀁濶濸澳瀅濸濶濸濼瀉濸濷澿澳濼瀁濶濿瀈濷濼瀁濺澳濼瀁瀇濸瀅濹濸瀅濸瀁濶濸澳瀇濻濴瀇澳瀀濴瀌澳濶濴瀈瀆濸澳瀈瀁濷濸瀆濼瀅濸濷澳瀂瀃濸瀅濴 瀇濼瀂瀁濁 濙濖濖澳瀊濴瀅瀁濼瀁濺濍濔瀁瀌澳濖濻濴瀁濺濸瀆澳瀂瀅澳瀀瀂濷濼濹濼濶濴瀇濼瀂瀁瀆澳瀁瀂瀇澳濸瀋瀃瀅濸瀆瀆濿瀌澳濴瀃瀃瀅瀂瀉濸濷澳濵瀌澳瀇濻濸澳瀃濴瀅瀇瀌澳瀅濸瀆瀃瀂瀁瀆濼濵濿濸澳濹瀂瀅澳濶瀂瀀瀃濿濼濴瀁濶濸澳濶瀂瀈濿濷澳瀉瀂濼濷澳瀇濻濸澳瀈瀆濸瀅澺瀆澳濴瀈瀇濻瀂瀅濼瀇瀌澳瀇瀂澳瀂瀃濸瀅濴瀇濸澳瀇濻濸澳濸瀄瀈濼瀃瀀濸瀁瀇濁瀭濡瀂瀇濸濍澳濧濻濼瀆澳濸瀄瀈濼瀃瀀濸瀁瀇澳濻濴瀆澳濵濸濸瀁澳瀇濸瀆瀇濸濷澳濴瀁濷澳濹瀂瀈瀁濷澳瀇瀂澳濶瀂瀀瀃濿瀌澳瀊濼瀇濻澳瀇濻濸澳濿濼瀀濼瀇瀆澳濹瀂瀅澳濴澳濖濿濴瀆瀆澳濕澳濷濼濺濼瀇濴濿澳濷濸瀉濼濶濸澿澳瀃瀈瀅瀆瀈濴瀁瀇澳瀇瀂澳瀃濴瀅瀇澳濄濈澳瀂濹澳瀇濻濸澳濙濖濖澳濥瀈濿濸瀆濁澳濧濻濸瀆濸澳濿濼瀀濼瀇瀆澳濴瀅濸澳濷濸瀆濼濺瀁濸濷澳瀇瀂澳瀃瀅瀂瀉濼濷濸澳瀅濸濴瀆瀂瀁濴濵濿濸澳瀃瀅瀂瀇濸濶瀇濼瀂瀁澳濴濺濴濼瀁瀆瀇澳濻濴瀅瀀濹瀈濿澳濼瀁瀇濸瀅濹濸瀅濸瀁濶濸澳濼瀁澳濴澳瀅濸瀆濼濷濸瀁瀇濼濴濿澳濼瀁瀆瀇濴濿濿濴瀇濼瀂瀁濁澳濧濻濼瀆澳濸瀄瀈濼瀃瀀濸瀁瀇澳濺濸瀁濸瀅濴瀇濸瀆澳瀈瀆濸瀆澳濴瀁濷澳濶濴瀁澳瀅濴濷濼濴瀇濸澳瀅濴濷濼瀂澳濹瀅濸瀄瀈濸瀁濶瀌澳濸瀁濸瀅濺瀌澳濴瀁濷澿澳濼濹澳瀁瀂瀇澳濼瀁瀆瀇濴濿濿濸濷澳濴瀁濷澳瀈瀆濸濷澳濼瀁澳濴濶濶瀂瀅濷濴瀁濶濸澳瀊濼瀇濻澳瀇濻濸澳濼瀁瀆瀇瀅瀈濶瀇濼瀂瀁瀆澿澳瀀濴瀌澳濶濴瀈瀆濸澳濻濴瀅瀀濹瀈濿澳濼瀁瀇濸瀅濹濸瀅濸瀁濶濸澳瀇瀂澳瀅濴濷濼瀂澳濶瀂瀀瀀瀈瀁濼濶濴瀇濼瀂瀁瀆濁澳濛瀂瀊濸瀉濸瀅澿澳瀇濻濸瀅濸澳濼瀆澳瀁瀂澳濺瀈濴瀅濴瀁瀇濸濸澳瀇濻濴瀇澳濼瀁瀇濸瀅濹濸瀅濸瀁濶濸澳瀊濼濿濿澳瀁瀂瀇澳瀂濶濶瀈瀅澳濼瀁澳濴澳瀃濴瀅瀇濼濶瀈濿濴瀅澳濼瀁瀆瀇濴濿濿濴瀇濼瀂瀁濁澳濜濹澳瀇濻濼瀆澳濸瀄瀈濼瀃瀀濸瀁瀇澳濷瀂濸瀆澳濶濴瀈瀆濸澳濻濴瀅瀀濹瀈濿澳濼瀁瀇濸瀅濹濸瀅濸瀁濶濸澳瀇瀂澳瀅濴濷濼瀂澳瀂瀅澳瀇濸濿濸瀉濼瀆濼瀂瀁澳瀅濸濶濸瀃瀇濼瀂瀁澿澳瀊濻濼濶濻澳濶濴瀁澳濵濸澳濷濸瀇濸瀅瀀濼瀁濸濷澳濵瀌澳瀇瀈瀅瀁濼瀁濺澳瀇濻濸澳濸瀄瀈濼瀃瀀濸瀁瀇澳瀂濹濹澳濴瀁濷澳瀂瀁澿澳瀇濻濸澳瀈瀆濸瀅澳濼瀆澳濸瀁濶瀂瀈瀅濴濺濸濷澳瀇瀂澳瀇瀅瀌澳瀇瀂澳濶瀂瀅瀅濸濶瀇澳瀇濻濸澳濼瀁瀇濸瀅濹濸瀅濸瀁濶濸澳濵瀌澳瀂瀁濸澳瀂瀅澳瀀瀂瀅濸澳瀂濹澳瀇濻濸澳濹瀂濿濿瀂瀊濼瀁濺澳瀀濸濴瀆瀈瀅濸瀆濍澳澳澳澳澳澳澳澳澳澳激濥濸瀂瀅濼濸瀁瀇澳瀂瀅澳瀅濸濿瀂濶濴瀇濸澳瀇濻濸澳瀅濸濶濸濼瀉濼瀁濺澳濴瀁瀇濸瀁瀁濴濁澳澳澳澳澳澳澳澳澳澳激濜瀁濶瀅濸濴瀆濸澳瀇濻濸澳瀆濸瀃濴瀅濴瀇濼瀂瀁澳濵濸瀇瀊濸濸瀁澳瀇濻濸澳濸瀄瀈濼瀃瀀濸瀁瀇澳濴瀁濷澳瀅濸濶濸濼瀉濸瀅濁澳澳澳澳澳澳澳澳澳澳激濖瀂瀁瀁濸濶瀇澳瀇濻濸澳濸瀄瀈濼瀃瀀濸瀁瀇澳濼瀁瀇瀂澳濴瀁澳瀂瀈瀇濿濸瀇澳瀂瀁澳濴澳濶濼瀅濶瀈濼瀇澳濷濼濹濹濸瀅濸瀁瀇澳濹瀅瀂瀀澳瀇濻濴瀇澳瀇瀂澳瀊濻濼濶濻澳瀇濻濸澳瀅濸濶濸濼瀉濸瀅澳濼瀆澳濶瀂瀁瀁濸濶瀇濸濷濁澳澳澳澳澳澳澳澳澳澳激濖瀂瀁瀆瀈濿瀇澳瀇濻濸澳濷濸濴濿濸瀅澳瀂瀅澳濴瀁澳濸瀋瀃濸瀅濼濸瀁濶濸濷澳瀅濴濷濼瀂濂濧濩澳瀇濸濶濻瀁濼濶濼濴瀁澳濹瀂瀅澳濻濸濿瀃濁濧濻濸瀭濷濸瀉濼濶濸瀭濻濴瀆瀭濵濸濸瀁瀭濸瀉濴濿瀈濴瀇濸濷瀭瀇瀂瀭瀀濸濸瀇瀭濺濸瀁濸瀅濴濿瀭濥濙瀭濸瀋瀃瀂瀆瀈瀅濸瀭瀅濸瀄瀈濼瀅濸瀀濸瀁瀇濁瀭濧濻濸瀭濷濸瀉濼濶濸瀭濶濴瀁瀭濵濸瀭瀈瀆濸濷瀭濼瀁瀭瀃瀂瀅瀇濴濵濿濸澳濸瀋瀃瀂瀆瀈瀅濸瀭濶瀂瀁濷濼瀇濼瀂瀁瀭瀊濼瀇濻瀂瀈瀇瀭瀅濸瀆瀇瀅濼濶瀇濼瀂瀁濁濘瀁濺濿濼瀆濻濍濧濻濼瀆澳濷濸瀉濼濶濸澳濶瀂瀀瀃濿濼濸瀆澳瀊濼瀇濻澳濜瀁濷瀈瀆瀇瀅瀌澳濖濴瀁濴濷濴澳濿濼濶濸瀁濶濸激濸瀋濸瀀瀃瀇澳濥濦濦澳瀆瀇濴瀁濷濴瀅濷澻瀆澼濁濢瀃濸瀅濴瀇濼瀂瀁澳濼瀆澳瀆瀈濵濽濸濶瀇澳瀇瀂澳瀇濻濸澳濹瀂濿濿瀂瀊濼瀁濺澳瀇瀊瀂澳濶瀂瀁濷濼瀇濼瀂瀁瀆濍澳澻濄澼澳濧濻濼瀆澳濷濸瀉濼濶濸澳瀀濴瀌澳瀁瀂瀇澳濶濴瀈瀆濸澳濼瀁瀇濸瀅濹濸瀅濸瀁濶濸澿澳濴瀁濷澳澻濅澼澳濧濻濼瀆澳濷濸瀉濼濶濸澳瀀瀈瀆瀇澳濴濶濶濸瀃瀇澳濴瀁瀌澳濼瀁瀇濸瀅濹濸瀅濸瀁濶濸澿澳濼瀁濶濿瀈濷濼瀁濺澳濼瀁瀇濸瀅濹濸瀅濸瀁濶濸澳瀇濻濴瀇澳瀀濴瀌澳濶濴瀈瀆濸澳瀈瀁濷濸瀆濼瀅濸濷澳瀂瀃濸瀅濴瀇濼瀂瀁澳瀂濹澳瀇濻濸澳濷濸瀉濼濶濸濁濙瀅濸瀁濶濻濍濟瀠灶瀀濸瀇瀇濸瀈瀅濂瀅灶濶濸瀃瀇濸瀈瀅澳濸瀋濸瀀瀃瀇澳濷濸澳濿濼濶濸瀁濶濸澳濶瀂瀁瀇濸瀁瀈澳濷濴瀁瀆澳濿濸澳瀃瀅灶瀆濸瀁瀇澳濴瀃瀃濴瀅濸濼濿澳濸瀆瀇澳濶瀂瀁濹瀂瀅瀀濸澳濴瀈瀋澳濖濡濥澳濷瀠濜瀁瀁瀂瀉濴瀇濼瀂瀁澿澳濦濶濼濸瀁濶濸瀆澳濸瀇澳濗灶瀉濸濿瀂瀃瀃濸瀀濸瀁瀇澳灶濶瀂瀁瀂瀀濼瀄瀈濸澳濖濴瀁濴濷濴澳濴瀃瀃濿濼濶濴濵濿濸瀆澳濴瀈瀋澳濴瀃瀃濴瀅濸濼濿瀆澳瀅濴濷濼瀂澳濸瀋濸瀀瀃瀇瀆澳濷濸澳濿濼濶濸瀁濶濸濁澳濟瀠濸瀋瀃濿瀂濼瀇濴瀇濼瀂瀁澳濸瀆瀇澳濴瀈瀇瀂瀅濼瀆灶濸澳濴瀈瀋澳濷濸瀈瀋澳濶瀂瀁濷濼瀇濼瀂瀁瀆澳瀆瀈濼瀉濴瀁瀇濸瀆澳濍澳濄澼澳濟瀠濴瀃瀃濴瀅濸濼濿澳瀁濸澳濷瀂濼瀇澳瀃濴瀆澳瀃瀅瀂濷瀈濼瀅濸澳濷濸澳濵瀅瀂瀈濼濿濿濴濺濸濎濅澼澳濟瀠濴瀃瀃濴瀅濸濼濿澳濷瀂濼瀇澳濴濶濶濸瀃瀇濸瀅澳瀇瀂瀈瀇澳濵瀅瀂瀈濼濿濿濴濺濸澳瀅濴濷濼瀂灶濿濸濶瀇瀅濼瀄瀈濸澳瀆瀈濵濼澿澳瀀灷瀀濸澳瀆濼澳濿濸澳濵瀅瀂瀈濼濿濿濴濺濸澳濸瀆瀇澳瀆瀈瀆濶濸瀃瀇濼濵濿濸澳濷瀠濸瀁澳濶瀂瀀瀃瀅瀂瀀濸瀇瀇瀅濸澳濿濸澳濹瀂瀁濶瀇濼瀂瀁瀁濸瀀濸瀁瀇濁濧濻濸瀭濷濸瀉濼濶濸瀭濻濴瀆瀭濵濸濸瀁瀭濸瀉濴濿瀈濴瀇濸濷瀭瀇瀂瀭瀀濸濸瀇瀭濺濸瀁濸瀅濴濿瀭濥濙瀭濸瀋瀃瀂瀆瀈瀅濸瀭瀅濸瀄瀈濼瀅濸瀀濸瀁瀇濁瀭濧濻濸瀭濷濸瀉濼濶濸瀭濶濴瀁瀭濵濸瀭瀈瀆濸濷瀭濼瀁瀭瀃瀂瀅瀇濴濵濿濸澳濸瀋瀃瀂瀆瀈瀅濸瀭濶瀂瀁濷濼瀇濼瀂瀁瀭瀊濼瀇濻瀂瀈瀇瀭瀅濸瀆瀇瀅濼濶瀇濼瀂瀁濁濟澺濴瀃瀃濴瀅濸濼濿澳濴澳灶瀇灶澳灶瀉濴濿瀈灶澳瀃瀂瀈瀅澳瀅灶瀃瀂瀁濷瀅濸澳濴瀈瀋澳濸瀋濼濺濸瀁濶濸瀆澳濺灶瀁灶瀅濴濿濸瀆澳濷澺濸瀋瀃瀂瀆濼瀇濼瀂瀁澳濴瀈瀋澳濥濙濁澳濟澺濴瀃瀃濴瀅濸濼濿澳瀃濸瀈瀇澳灷瀇瀅濸澳瀈瀇濼濿濼瀆灶澳瀆濴瀁瀆澳瀅濸瀆瀇瀅濼濶瀇濼瀂瀁澳濷濴瀁瀆澳濷濸瀆澳濶瀂瀁濷濼瀇濼瀂瀁瀆澳濷澺濸瀋瀃瀂瀆濼瀇濼瀂瀁澳瀃瀂瀅瀇濴濵濿濸瀆濁 The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. L'appareil a été évalué pour répondre aux exigences générales d'exposition aux RF. L'appareil peut être utilisé sans restriction dans des conditions d'exposition portables.

Scosche Industries Inc. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – EquipmentType Company name: Scosche Industries Inc. Address: 1550 Pacific Ave. Oxnard CA 93033 USA Product Name: Power bank FCCID: IKQPBQ5MS2 Model(s): PBQ5MS2, PBQ5MS2WT 2.911(d)(5)(i) EquipmentType We, [Scosche Industries Inc.] (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Mark Larson Date: 2023/08/01 Title and Company name: SR Product Manager/ Scosche Industries Inc. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Scosche Industries Inc. 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Scosche Industries Inc. Address: 1550 Pacific Ave. Oxnard CA 93033 USA Product Name: Power bank FCCID: IKQPBQ5MS2 Model(s): PBQ5MS2, PBQ5MS2WT 2.911(d)(5)(ii) Applicant filing We, [Scosche Industries Inc] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 ,established pursuant to §1.50002 of this chapter,as an entity producing coveredcommunications equipment. Yours sincerely, Name: Mark Larson Date: 2023/08/01 Title and Company name: SR Product Manager / Scosche Industries Inc NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Scosche Industries Inc. U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Scosche Industries Inc. FRN: 0012561791 Contact Name: Mark Larson Address: 1550 Pacific Ave. City/Province/Zip: Oxnard CA 93033 USA Telephone No:805-486-9996 Email: [email protected] This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: August 1, 2023 Signed by (Printed Name/Title): Mark Larson/ SR Product Manager The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Scosche Industries Inc. FCC ID: IKQPBQ5MS2 Contact Name: Mark Larson Address: 1550 Pacific Ave. Oxnard CA 93033 USA Telephone No: 805-486-9996 Email: [email protected] Applicant Signature: Date: 2023-08-01 Signed by (Printed Name/Title): Mark Larson/ SR Product Manager

Scosche Industries Inc. Authorization Company: Scosche Industries Inc. Address: 1550 Pacific Ave. Oxnard CA 93033 USA Product Name: Power bank Model Number(s): PBQ5MS2, PBQ5MS2WT We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023/08/01 Name: Mark Larson Title: SR Product Manager Company: Scosche Industries Inc

Declaration on model difference We the undersigned hereby confirm that any of our production units bearing the following model numbers are identical in circuitry and electrical, mechanical and physical construction; The difference is only in model names. FCC ID: IKQPBQ5MS2 Production name Trade name Model no. Power bank N/A PBQ5MS2, PBQ5MS2WT Confirmed by：Scosche Industries Inc. Signature: Date: 2023/08/01 Name: Mark Larson Title: SR Product Manager Company: Scosche Industries Inc.

Scosche Industries Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023/08/01 Subject; Request for Confidentiality FCC ID: IKQPBQ5MS2 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Mark Larson Title: SR Product Manager Company name: Scosche Industries Inc

External Photos

Size:40*20mm Model : PBQ5MS2 FCC ID: IKQPBQ5MS2 IC: 6955A-PBQ5MS2 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Label location

Internal Photos Antenna

No.：BCTC/RF-EMC-005 Page 1 of 23 Edition：A.4 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2304408542-1E Applicant: Scosche Industries Inc. Product Name: Power bank Model/Type Ref.: PBQ5MS2 Tested Date: 2023-04-23 to 2023-05-08 Issued Date: 2023-05-10 Report No.: BCTC2304408542-1E No.：BCTC/RF-EMC-005 Page 2 of 23 Edition：A.4 FCC ID: IKQPBQ5MS2 The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. Product Name: Power bank Trademark: Scosche Model/Type Ref.: PBQ5MS2, PBQ5MS2WT Prepared For: Scosche Industries Inc. Address: 1550 Pacific Ave. Oxnard CA 93033 USA Manufacturer: Scosche Industries Inc. Address: 1550 Pacific Ave. Oxnard CA 93033 USA Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Tangwei, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2023-04-23 Sample tested Date: 2023-04-23 to 2023-05-08 Report No.: BCTC2304408542-1E Test Standards: FCC CFR 47 part1, 1.1307(b), 1.1310 Test Results: PASS Tested by: Approved by: Brave Zeng/ Project Handler Zero Zhou/Reviewer Report No.: BCTC2304408542-1E No.：BCTC/RF-EMC-005 Page 3 of 23 Edition：A.4 Table of Content Test Report Declaration Page 1. Version .................................................................................................................. 4 2. Product Information ............................................................................................... 5 2.1 Product Information ............................................................................................... 5 2.2 Support Equipment ............................................................................................... 5 2.3 Test Mode ............................................................................................................. 5 2.4 Test Setup Configuration ......................................................................................... 6 4.3 Support Equipment ............................................................................................... 6 3. Test Facility and Test Instrument Used ................................................................. 7 3.1 Test Facility ........................................................................................................... 7 3.2 Test Instrument Used ............................................................................................ 7 4. Method Of Measurement ....................................................................................... 8 4.1 Applicable Standard .............................................................................................. 8 4.2 Block Diagram Of Test Setup ................................................................................ 8 4.3 Limit ...................................................................................................................... 9 4.4 Test Procedure ..................................................................................................... 9 4.5 The EUT does comply with item 5(b) of KDB 680106 D01v03 ............................ 10 4.6 E And H Field Strength ....................................................................................... 11 5. Photographs of Test Set-Up ................................................................................ 17 Report No.: BCTC2304408542-1E No.：BCTC/RF-EMC-005 Page 4 of 23 Edition：A.4 1. Version Report No. Issue Date Description Approved BCTC2304408542-1E 2023-05-10 Original Valid Report No.: BCTC2304408542-1E No.：BCTC/RF-EMC-005 Page 5 of 23 Edition：A.4 2. Product Information 2.1 Product Information Model/Type reference: PBQ5MS2, PBQ5MS2 Model differences: Our production units bearing the following model numbers are identical in circuitry and electrical, mechanical and physical construction; The difference is only in model names. Modulation: ASK Operation Frequency: 112-205KHz Antenna installation: Loop coil antenna Ratings: Input(Power Bank) ：5V/2A Input /Output: 5V/2A Wireless：5W/7.5W/10W Adapter： Input：AC100-240V,50/60Hz Output: 5V/2A 2.2 Support Equipment No. Cable Type Quantity Provider Length (m) Shielded Note 1 Dummy load N/A DL01 N/A Auxiliary Dummy load 2 Adapter N/A DL02 N/A Auxiliary Dummy load Notes: 1. All the equipment/cables were placed in the worst-case configuration to maximize the emission during the test. 2. Grounding was established in accordance with the manufacturer’s requirements and conditions for the intended use. 2.3 Test Mode Test Modes 1 No-load mode Test Modes 2 Half-load mode Test Modes 3 Full load mode N/A: The wireless charge did not work while the sample was being charged Report No.: BCTC2304408542-1E No.：BCTC/RF-EMC-005 Page 6 of 23 Edition：A.4 2.4 Test Setup Configuration See test photographs attached in EUT TEST SETUP Photographs for the actual connections between Product and support equipment. 4.3 Support Equipment No. Device Type Brand Model Series No. Note E-1 Dummy load N/A DL01 N/A Auxiliary E-4 Power bank N/A QIC37 N/A EUT E-5 Adapter N/A N/A N/A Auxiliary Notes: 1. All the equipment/cables were placed in the worst-case configuration to maximize the emission during the test. 2. Grounding was established in accordance with the manufacturer’s requirements and conditions for the intended use. Report No.: BCTC2304408542-1E No.：BCTC/RF-EMC-005 Page 7 of 23 Edition：A.4 3. Test Facility and Test Instrument Used 3.1 Test Facility All measurement facilities used to collect the measurement data are located at Shenzhen BCTC Testing Co., Ltd. Address:1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Tangwei, Fuhai Subdistrict, Bao'an District, Shenzhen, Guang…

Text truncated - open the document above for the full version.

Antenna Specification Length * Width：43mm *43mm Inside diameter：12mm Manufacturer: Scosche Industries Inc. Address: 1550 Pacific Ave. Oxnard CA 93033 USA

No.：BCTC/RF-EMC-005 Page 1 of 25 Edition：A.4 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2304408542-2E Applicant: Scosche Industries Inc. Product Name: Power bank Model/Type Ref.: PBQ5MS2 Tested Date: 2023-04-23 to 2023-05-08 Issued Date: 2023-05-10 Report No.: BCTC2304408542-2E No.：BCTC/RF-EMC-005 Page 2 of 25 Edition：A.5 FCC ID: IKQPBQ5MS2 The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. Product Name: Power bank Trademark: Scosche Model/Type Ref.: PBQ5MS2, PBQ5MS2WT Prepared For: Scosche Industries Inc. Address: 1550 Pacific Ave. Oxnard CA 93033 USA Manufacturer: Scosche Industries Inc. Address: 1550 Pacific Ave. Oxnard CA 93033 USA Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Tangwei, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2023-04-23 Sample tested Date: 2023-04-23 to 2023-05-08 Report No.: BCTC2304408542-2E Test Standards: FCC Part15.209 ANSI C63.10-2013 Test Results: PASS Tested by: Approved by: Brave Zeng/ Project Handler Zero Zhou/Reviewer Report No.: BCTC2304408542-2E No.：BCTC/RF-EMC-005 Page 3 of 25 Edition：A.5 Table of Content Test Report Declaration Page 1. Version .................................................................................................................. 4 2. Test Summary ....................................................................................................... 5 3. Measurement Uncertainty ..................................................................................... 6 4. Product Information and Test Setup ...................................................................... 7 4.1 Product Information ................................................................................................. 7 4.2 Test Setup Configuration ......................................................................................... 7 4.3 Support Equipment ............................................................................................... 8 4.4 Test Mode ............................................................................................................. 8 5. Test Facility and Test Instrument Used ................................................................. 9 5.1 Test Facility ........................................................................................................... 9 5.2 Test Instrument Used ............................................................................................ 9 6. Conducted Emissions .......................................................................................... 11 6.1 Block Diagram Of Test Setup ................................................................................ 11 6.2 Limit ....................................................................................................................... 11 6.3 Test Procedure ...................................................................................................... 11 6.4 EUT Operating Conditions ..................................................................................... 12 6.5 Test Result ............................................................................................................ 13 7. Radiated Emissions ............................................................................................. 15 7.1 Block Diagram Of Test Setup ................................................................................ 15 7.2 Limit ....................................................................................................................... 16 7.3 Test Procedure ...................................................................................................... 16 7.4 Test Result .......................................................................................................... 17 8. Bandwidth Test .................................................................................................... 20 9. Antenna Requirements ........................................................................................ 22 10. EUT Test Setup Photographs .............................................................................. 23 Report No.: BCTC2304408542-2E No.：BCTC/RF-EMC-005 Page 4 of 25 Edition：A.5 1. Version Report No. Issue Date Description Approved BCTC2304408542-2E 2023-05-10 Original Valid Report No.: BCTC2304408542-2E No.：BCTC/RF-EMC-005 Page 5 of 25 Edition：A.5 2. Test Summary The Product has been tested according to the following specifications: No. Test Parameter Clause No Results 1 Conducted Emission 15.207 PASS 2 Radiated Emission 15.209 PASS 3 20dB Bandwidth 15.215 PASS 4 Antenna Requirement 15.203 PASS Report No.: BCTC2304408542-2E No.：BCTC/RF-EMC-005 Page 6 of 25 Edition：A.5 3. Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the Product as specified in CISPR 16-4-2. This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. No. Item Uncertainty 1 3m chamber Radiated spurious emission(9kHz-30MHz) U=3.7dB 2 3m chamber Radiated spurious emission(30MHz-1GHz) U=4.3dB 3 3m chamber Radiated spurious emission(1GHz-18GHz) U=4.5dB 4 3m chamber Radiated spurious emission(18GHz-40GHz) U=3.34dB 5 Conducted Emission(150kHz-30MHz) U=3.20dB 6 Conducted Adjacent channel power U=1.38dB 7 Conducted output power uncertainty Above 1G U=1.576dB 8 Conducted output power uncertainty below 1G U=1.28dB 9 humidity uncertainty U=5.3% 10 Temperature uncertainty U=0.59°C Report No.: BCTC2304408542-2E No.：BCTC/RF-EMC-005…

Text truncated - open the document above for the full version.

TEST SETUP PHOTOGRAPHS 1.1. Photos of Radiation Emission Measurement Conducted emissions Radiated Measurement Photos ----------------The end----------------