IPH-0037600Aviation Transponder

Preliminary GTX 327 INSTALLATION MANUAL GARMIN Corporation 1200 E. 151st Street Olathe, KS 66062 Dwg. Number 190-00187-02 Rev. 1 Archive Filename: 190-00187-02-01.zip Document Source: MS Word Rev. Date Description of Change ECO # 1 10/07/99 Engineering Release --- Confidential This document and the specifications contained herein are the property of GARMIN Corporation and may not be reproduced or used in whole or in part as the basis for manufacturing or sale of products without written permission of GARMIN Corporation. Approvals Date Drawn MD 10/07/99 Chkd. Proj. Mgr. Released Preliminary  GARMIN International, Inc. 1200 E. 151 st Street Olathe, KS 66062 USA 190-00187-02 Revision 1 October 1999 *7; ,167$//$7,21 0$18$/ Preliminary GTX 327 Installation Manual Page A 190-00187-02 Rev 1 © Copyrigh t 1999 GARMIN Corporation All Rights Reserved Except as expressly provided below, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of GARMIN Corporation. GARMIN Corporation hereby grants permission to download a single copy of this manual and of any revision to this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual or revision must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. GARMIN International, Inc. 1200 E. 151 st Street Olathe, KS 66062 USA Telephone: 913-397-8200 Dealer Line: 1-800-800-1420 Web Sit e Address : www.garmin.com RECORD OF REVISIONS Revision Revision Date Description ECO # 1 10/07/99 Engineering Release ---- Preliminary GTX 327 Installation ManualPage i 190-00187-02Rev 1 TABLE OF CONTENTS 1.GENERAL DESCRIPTION................................................................................................................. 1 1.1 INTRODUCTION ................................................................................................................................ 1 1.2 EQUIPMENT DESCRIPTION ............................................................................................................ 1 1.3 INTERFACE SUMMARY................................................................................................................... 1 1.4 GTX 327 TRANSPONDER SPECIFICATIONS ................................................................................ 2 1.5 EQUIPMENT AVAILABLE ............................................................................................................... 2 1.6 INSTALLATION ACCESSORIES...................................................................................................... 3 1.7 ADDITIONAL EQUIPMENT REQUIRED ........................................................................................ 3 1.8 INSTALLATION APPROVAL ........................................................................................................... 3 1.9 LIMITED WARRANTY...................................................................................................................... 4 2.INSTALLATION ................................................................................................................................. 5 2.1 INTRODUCTION ................................................................................................................................ 5 2.2 UNPACKING AND INSPECTING EQUIPMENT ............................................................................. 5 2.3 ANTENNA INSTALLATION ............................................................................................................. 5 2.3.1 Location Considerations ........................................................................................................... 5 2.3.2 Antenna Installation .................................................................................................................. 5 2.3.3 Antenna Cable Installation........................................................................................................ 6 2.3.4 Antenna Cable Connectors........................................................................................................ 6 2.4 GTX 327 INSTALLATION ................................................................................................................. 8 2.5 COOLING AIR..................................................................................................................................... 8 2.6 ELECTRICAL CONNECTIONS......................................................................................................... 8 3POST INSTALLATION CONFIGURATION & CHECKOUT PROCEDURE ............................... 10 3.1 AIRCRAFT STATION LICENSING REQUIREMENTS ................................................................. 10 3.2 OPERATION...................................................................................................................................... 10 3.2.1 Function Selection Switch ...................................................................................................... 11 3.2.2 Code Selection ........................................................................................................................ 12 3.2.3 Configuration Pages ................................................................................................................ 13 APPENDIX A. CERTIFICATION DOCUMENTS ................................................................................... 14 A.1 CONTINUED AIRWORTHINESS.................................................................................................... 14 A.2 ENVIRONMENTAL QUALIFICATION FORM.............................................................................. 15 Preliminary GTX 32…

Text truncated - open the document above for the full version.

Preliminary GTX 327 INSTALLATION MANUAL GARMIN Corporation 1200 E. 151st Street Olathe, KS 66062 Dwg. Number 190-00187-02 Rev. 1 Archive Filename: 190-00187-02-01.zip Document Source: MS Word Rev. Date Description of Change ECO # 1 10/07/99 Engineering Release --- Confidential This document and the specifications contained herein are the property of GARMIN Corporation and may not be reproduced or used in whole or in part as the basis for manufacturing or sale of products without written permission of GARMIN Corporation. Approvals Date Drawn MD 10/07/99 Chkd. Proj. Mgr. Released Preliminary  GARMIN International, Inc. 1200 E. 151 st Street Olathe, KS 66062 USA 190-00187-02 Revision 1 October 1999 *7; ,167$//$7,21 0$18$/ Preliminary GTX 327 Installation Manual Page A 190-00187-02 Rev 1 © Copyrigh t 1999 GARMIN Corporation All Rights Reserved Except as expressly provided below, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of GARMIN Corporation. GARMIN Corporation hereby grants permission to download a single copy of this manual and of any revision to this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual or revision must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. GARMIN International, Inc. 1200 E. 151 st Street Olathe, KS 66062 USA Telephone: 913-397-8200 Dealer Line: 1-800-800-1420 Web Sit e Address : www.garmin.com RECORD OF REVISIONS Revision Revision Date Description ECO # 1 10/07/99 Engineering Release ---- Preliminary GTX 327 Installation ManualPage i 190-00187-02Rev 1 TABLE OF CONTENTS 1.GENERAL DESCRIPTION................................................................................................................. 1 1.1 INTRODUCTION ................................................................................................................................ 1 1.2 EQUIPMENT DESCRIPTION ............................................................................................................ 1 1.3 INTERFACE SUMMARY................................................................................................................... 1 1.4 GTX 327 TRANSPONDER SPECIFICATIONS ................................................................................ 2 1.5 EQUIPMENT AVAILABLE ............................................................................................................... 2 1.6 INSTALLATION ACCESSORIES...................................................................................................... 3 1.7 ADDITIONAL EQUIPMENT REQUIRED ........................................................................................ 3 1.8 INSTALLATION APPROVAL ........................................................................................................... 3 1.9 LIMITED WARRANTY...................................................................................................................... 4 2.INSTALLATION ................................................................................................................................. 5 2.1 INTRODUCTION ................................................................................................................................ 5 2.2 UNPACKING AND INSPECTING EQUIPMENT ............................................................................. 5 2.3 ANTENNA INSTALLATION ............................................................................................................. 5 2.3.1 Location Considerations ........................................................................................................... 5 2.3.2 Antenna Installation .................................................................................................................. 5 2.3.3 Antenna Cable Installation........................................................................................................ 6 2.3.4 Antenna Cable Connectors........................................................................................................ 6 2.4 GTX 327 INSTALLATION ................................................................................................................. 8 2.5 COOLING AIR..................................................................................................................................... 8 2.6 ELECTRICAL CONNECTIONS......................................................................................................... 8 3POST INSTALLATION CONFIGURATION & CHECKOUT PROCEDURE ............................... 10 3.1 AIRCRAFT STATION LICENSING REQUIREMENTS ................................................................. 10 3.2 OPERATION...................................................................................................................................... 10 3.2.1 Function Selection Switch ...................................................................................................... 11 3.2.2 Code Selection ........................................................................................................................ 12 3.2.3 Configuration Pages ................................................................................................................ 13 APPENDIX A. CERTIFICATION DOCUMENTS ................................................................................... 14 A.1 CONTINUED AIRWORTHINESS.................................................................................................... 14 A.2 ENVIRONMENTAL QUALIFICATION FORM.............................................................................. 15 Preliminary GTX 32…

Text truncated - open the document above for the full version.

Mr. Frank Coperich Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Dear Mr. Coperich: We have reviewed the request from Garmin International Inc. for Type Acceptance of a Mode-C Airborne ATC Transponder, model number GTX 327. The Federal Communication Commission ID number is IPH-00376. Our office has reviewed the technical data for this transponder and the equipment's performance is consistent with the spectrum requirements of Technical Specification Order C74c. We have no objection to the certification of this device. If you require any additional information, please contact Mr. Tim Pawlowitz, Spectrum Assignment and Engineering Division, at (202) 267- 9739. Sincerely, George Sakai File: 1200-5 WP: \\ATS060S2\DATA\USERS\SHARE\ASR100\typecert2.doc

Mr. Frank Coperich Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Dear Mr. Coperich: We have reviewed the request from Garmin International Inc. for Type Acceptance of a Mode-C Airborne ATC Transponder, model number GTX 327. The Federal Communication Commission ID number is IPH-00376. Our office has reviewed the technical data for this transponder and the equipment's performance is consistent with the spectrum requirements of Technical Specification Order C74c. We have no objection to the certification of this device. If you require any additional information, please contact Mr. Tim Pawlowitz, Spectrum Assignment and Engineering Division, at (202) 267- 9739. Sincerely, George Sakai File: 1200-5 WP: \\ATS060S2\DATA\USERS\SHARE\ASR100\typecert2.doc

November 16, 1999 Federal Communications Commission Equipment Approval Services P.O. Box 35815 Pittsburgh, PA 15251-3315 Applicant:Garmin International, Inc. Equipment:FCC ID: IPH-0037600 FCC Rules:Parts 2 and 87 Gentlemen: Please find enclosed Application Form 159 with filing fees attached for Certification of Intentional Radiators operated at 1090.00 MHz. The 731 form and application have been electronically submitted and any attachments will be up loaded to the FCC web site. It is requested that the schematics of the application be held confidential per Section 0.459. A statement of confidentiality will be attached with the schematics at the time of submittal. The special fee for request of confidentiality will be submitted with the application. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Sincerely, Scot Rogers Rogers Labs, Inc. Enclosures ROGERS LABS, INC. 4405 West 259 th Terrace Louisburg, KS 66053 Phone / Fax (913) 837-3214

November 16, 1999 Federal Communications Commission Equipment Approval Services P.O. Box 35815 Pittsburgh, PA 15251-3315 Applicant:Garmin International, Inc. Equipment:FCC ID: IPH-0037600 FCC Rules:Parts 2 and 87 Gentlemen: It is requested that the schematics of the application be held confidential per Section 0.459. The section 5 exhibits (Schematics) are to be held in confidence with the FCC. Specialized technology and techniques incorporated into the design maybe depicted in the schematics. It is with this consideration that the request for confidentiality be made. Specifically the file TX_sch.pdf uploaded as exhibit 5 shall be held in confidence. The special fee for request of confidentiality will be submitted with the application. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Sincerely, Scot Rogers Rogers Labs, Inc. ROGERS LABS, INC. 4405 West 259 th Terrace Louisburg, KS 66053 Phone / Fax (913) 837-3214

0.85"(21.6mm) 2.50"(63.5mm) 0.25"(6.35mm) 1.50"(38.1mm) DRAWING CONTROL SPECIFICATION MGR. PROJ. RELEASED BY UNLESS NOTED OTHERWISE ANGLES +/- 2 DEG HOLES +/-.015 .XXX +/-0.020 .XX +/-0.04 TOLERANCE CKHD. DRAWN DATE OFSHT. REV. DWG. NO. SCALE SIZE TITLE APPRVD. DESCRIPTIONDATEREV. REVISIONS CONFIDENTIAL This drawing and the specifications contained herein are the property of GARMIN CORPORATION and may not be reproduced or used in whole or in part as the basis for manufacture or sale of products without written permission of GARMIN CORPORATION. ARCHIVE FILE: Olathe, Kansas 66062 U.S.A.Olathe,Kansas66062U.S.A. GARMIN CorporationGARMIN Corporation 1200 East 151st Street1200East151stStreet TAG, S/N, GTX 327 161-00231-00 AA 1 1 1:1 RNL JSK DKS MLR 9/21/99 9/21/99 9/22/99 9/22/99 INITIAL RELEASE PRODUCTION RELEASE 9/21/99 11/12/99 1 A 12109 ---- NOTES: 1. MATERIAL: VINYL LAMINATE. SECOND SURFACE PRINTED, BACKGROUND IS BLACK, WITH WHITE COPY. ACRYLIC PERMANENT ADHESIVE ON BACK SIDE WITH PEEL OFF RELEASE LINER. TOTAL PACKAGE THICKNESS EXCLUDING RELEASE LINER IS 0.002"-0.005" (0.05-0.13mm). 2. 8 DIGIT SERIAL NUMBER IS PRINTED SEQUENTIALLY IN WHITE FIELD AND ON TWO SMALLER ADDITIONAL TAGS WITH INDELIBLE BLACK INK. SERIAL NUMBER IS BARCODE 39 WITH HUMAN READABLE CODE BENEATH. SERIAL NUMBER RANGE FOR THIS ITEM: 83700000-83799999 AS INDICATED ON GARMIN PURCHASE ORDER. 3. PARTS ARE PROCESSED WITH FILM MADE FROM PHOTO-PLOT OF ORIGINAL CORELDRAW (VERSION 8) FILE. 4. MAIN TAG AND ADDITIONAL TAGS ARE SUPPLIED ON ONE ROLL WITH EQUIVALENT SERIAL NUMBERS ADJACENT TO EACH OTHER. ALL TAGS ARE "KISS CUT" ON ROLL. 5. CORNER RADII 0.03"(0.8mm) MAX. 6. ARTWORK VERSION 2. 7. TAGS WITH S/N BELOW 83700200 MAY BE MADE FROM LAMINATED PAPER, DO NOT HAVE BAR CODE OR EXTRA TAGS (NOTE 2), AND ARE NOT SUPPLIED ON A ROLL (NOTE 4). 123456789 MOD LEVEL FAA TSO-C74c, CLASS 1A 11-33 VDC FCC ID IPH-0037600 GARMIN, Olathe, KS USA GTX 327 P/N 011-00490-00 Made in the United States from domestic and foreign components

TEST REPORT For APPLICATION of CERTIFICATION For GARMIN INTERNATIONAL, INC. 1200 East 151st Street Olathe, KS 66062 Phone: (913) 397-8200 MODEL: GTX 327 FREQUENCY: 1090 MHz FCC ID: IPH-0037600 Test Date: October 26, 1999 Certifying Engineer: Scot D. Rogers ROGERS LABS, INC. 4405 W. 259th Terrace Louisburg, KS 66053 Phone: (913) 837-3214 FAX: (913) 837-3214 This report shall not be reproduced except in full, without the written approval of the laboratory. This report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government. NVLAP Accredited LaboratoryNVLAP Lab Code: 200087-0 ROGERS LABS, INC.GARMIN INTERNATIONAL, INC. 4405 W. 259th TerraceMODEL: GTX 327 Louisburg, KS 66053Test #: 991026FCC ID: IPH-0037600 Phone/Fax: (913) 837-3214Test to: FCC Parts 2 & 87Page 2 of 29 Cert./GTX327.doc 11/15/1999 TABLE OF CONTENTS FORWARD:3 LIST OF TEST EQUIPMENT3 EQUIPMENT TESTED4 EQUIPMENT AND CABLE CONFIGURATION4 Test Setup4 2.1033(C)APPLICATION FOR CERTIFICATION5 2.1046RF POWER OUTPUT7 Measurements Required:7 Test Arrangement:7 Results:8 2.1047 MODULATION CHARACTERISTICS8 Measurements Required:8 Test Arrangement:9 Results:9 2.1049 OCCUPIED BANDWIDTH9 Measurements Required:9 Test Arrangement:9 Results:10 2.1051 SPURIOUS EMISSIONS AT ANTENNA TERMINALS12 Measurements Required:12 Test Arrangement:12 Results:13 2.1053FIELD STRENGTH OF SPURIOUS RADIATION14 Measurements Required:14 Test Arrangement:14 Results:16 2.1055 FREQUENCY STABILITY16 Measurements Required:16 Test Arrangement:17 Results:18 APPENDIX19 NVLAP Accredited LaboratoryNVLAP Lab Code: 200087-0 ROGERS LABS, INC.GARMIN INTERNATIONAL, INC. 4405 W. 259th TerraceMODEL: GTX 327 Louisburg, KS 66053Test #: 991026FCC ID: IPH-0037600 Phone/Fax: (913) 837-3214Test to: FCC Parts 2 & 87Page 3 of 29 Cert./GTX327.doc 11/15/1999 FORWARD: In accordance with the Federal Communications Code of Federal Regulations, dated October 1, 1998, Part 2 Subpart J, Paragraphs 2.907, 2.911, 2.913, 2.925, 2.926, 2.1031 through 2.1057; Part 87, Subchapter D, Paragraphs 87.131 through 87.147; and Report and Order FCC 98-58 the following is submitted: List of Test Equipment A Hewlett Packard 8591EM and or 8562A Spectrum Analyzer was used as the measuring device for the emissions testing. The analyzer settings used are described in the following table. Refer to Appendix for a complete list of Test Equipment. HP 8591EM SPECTRUM ANALYZER SETTINGS CONDUCTED EMISSIONS: RBWAVG. BW DETECTOR FUNCTION 9 kHz30 kHzPeak/Quasi Peak RADIATED EMISSIONS (30 – 1000 MHz): RBWAVG. BW DETECTOR FUNCTION 120 kHz300 kHzPeak/Quasi Peak HP 8562A SPECTRUM ANALYZER SETTINGS RADIATED EMISSIONS (1 – 40 GHz): RBWAVG. BW DETECTOR FUNCTION 1 MHz1 MHzPeak/Average ANTENNA CONDUCTED EMISSIONS: RBWAVG. BW DETECTOR FUNCTION 100 kHz300 kHzPeak NVLAP Accredited LaboratoryNVLAP Lab Code: 200087-0 ROGERS LABS, INC.GARMIN INTERNATIONAL, INC. 4405 W. 259th TerraceMODEL: GTX 327 Louisburg, KS 66053Test #: 991026FCC ID: IPH-0037600 Phone/Fax: (913) 837-3214Test to: FCC Parts 2 & 87Page 4 of 29 Cert./GTX327.doc 11/15/1999 Equipment Tested EQUIPMENTMODEL/PART# EUTGTX327 IFRATC-1400A Power SupplyTrygon Test results in this report relate only to the items tested. Equipment and Cable Configuration Test Setup The EUT was arranged in a typical engineering test setup configuration. The EUT was connected to a dc power supply for power and a coaxial cable was connected to the antenna output terminal. The coaxial cable was split by a directional coupler and connected to a spectrum analyzer and the IFR test box. This provided a 50-ohm load and response signals to exercise the EUT. On the attenuated output port of the directional coupler a notch filter, attenuation and spectrum analyzer was connected. The notch filter was used at the spectrum analyzer input to attenuate the fundamental frequency centered at 1090 MHz. Refer to Figure 1 for a diagram of the test setup. Figure 1. Test Setup IFR ATC-1400A EUT Directional Coupler 20dB Attenuation Attenuation and/or Notch Filter Centered @ 1090MHz Spectrum Analyzer Plotter NVLAP Accredited LaboratoryNVLAP Lab Code: 200087-0 ROGERS LABS, INC.GARMIN INTERNATIONAL, INC. 4405 W. 259th TerraceMODEL: GTX 327 Louisburg, KS 66053Test #: 991026FCC ID: IPH-0037600 Phone/Fax: (913) 837-3214Test to: FCC Parts 2 & 87Page 5 of 29 Cert./GTX327.doc 11/15/1999 2.1033(c)Application for Certification 1.Manufacturer:GARMIN INTERNATIONAL, INC. 1200 East 151 ST Street Olathe, KS 66062 Phone (913) 397-8200 2.Identification:Model:GTX 327 FCC I.D.: IPH-0037600 3.Refer to Exhibit for Installation and Operating Instructions Manual. 4.Emission Type:11M0M1D 5.Frequency Range:1090 MHz. 6.Operating Power Level: RPS = Replies Per Second PR = Pulse Reply Rate PW = Pulse Width Duty Factor = 1200 RPS X 15 PR X (0.45 X 10 -6 ) PW Duty Factor = 0.0081 Nominal Average Power = P o (PEP) X Duty Factor 205 W PEP X 0.0081 = 1.7 W Ave 7.Max P o :210 W PEP. 8.Power into final amplifier: 561 Watts PEP (54V @ 10.4A). 9.Tune Up Procedure for Output Power: Refer to tune-up procedures for GTX 327 in the equipment manuals. 10.Description of Circuitry and Devices Provided for Determining and Stabilizing Frequency, for Suppression of Spurious Radiation, Modulation and Power: A very high Q ceramic resonator controls the transmitter frequency. All components including the PCB material, trimmer capacitors, etc. are very stable. A three pole low pass filter with quarter-wave stubs for the second and third harmonics are incorporated into the output of the power amplifier. Please refer to schematic diagrams for the GTX 327 Transponder. NVLAP Accredited LaboratoryNVLAP Lab Code: 200087-0 ROGERS LABS, INC.GARMIN INTERNATIONAL, INC. 4405 W. 259th TerraceMODEL: GTX 327 Louisburg, KS 66053Test #: 991026FCC ID: IPH-0037600 Phone/Fax: (913) 837-3214Test to: FCC Parts 2 & 87Page 6 of 29 Cert./GTX327.doc 11/15/1999 The transponder uses the standard pulse format as required by ICAO, Annex 10 for both A and C mod…

Text truncated - open the document above for the full version.