IPH-01204LOW POWER COMMUNICATIONS TRANSMITTER

Garmin International Inc

Click to zoom

Application Details

Equipment Class: DXX - Part 15 Low Power Communication Device Transmitter
Date of Grant: Jul 31, 2007
Application Purpose: Original Equipment
Date of Application: Jul 30, 2007
Equipment Note: LOW POWER COMMUNICATIONS TRANSMITTER
Frequency Range: 2459.50000000 - 2460.50000000
Company: Garmin International Inc
Country: United States

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

RF Remote owner’s manual For Use with GPSMAP 4000/5000 Series Chartplotters 190-00856-00_0A.indd 16/22/2007 1:05:28 PM © 2007 Garmin Ltd. or its subsidiaries All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Information in this document is subject to change without notice. Garmin reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes or improvements. Visit the Garmin Web site (www.garmin.com) for current updates and supplemental information concerning the use and operation of this and other Garmin products. Garmin ® is a trademark of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. GPSMAP ® is a trademark of Garmin Ltd. or its subsidiaries. This trademark may not be used without the express permission of Garmin. Refer to your chartplotter owner’s manual or product information sheet to view the warranty, warnings, cautions, and the software license agreement. Visit the Garmin Web site (www.garmin.com) for current updates and supplemental information concerning the use and operation of this and other Garmin products. June 2007 Part Number 190-00856-00 Rev. A Printed in Taiwan 190-00856-00_0A.indd 26/22/2007 1:05:28 PM RF Remote Owner’s Manual IntroductIon IntroductIon The 4000/5000 Series RF Remote is for use with the following Garmin chartplotters: GPSMAP 4008 GPSMAP 5008 GPSMAP 4012 GPSMAP 5012 GPSMAP 4208 GPSMAP 5208 GPSMAP 4212 GPSMAP 5212 The remote is used to control the 4000/5000 screens. It can be used up to 10 meters (32 feet) from the chartplotter and does not need to be pointed directly at your chartplotter. The remote operates on 2 AAA batteries (not included). To replace the batteries, use a small Phillips screwdriver to open the access cover on the rear panel. Use alkaline batteries for best results. • • • • 190-00856-00_0A.indd 16/22/2007 1:05:28 PM RF Remote Owner’s Manual BasIc operatIon BasIc operatIon Pairing buttons Range (+/-) Rocker Up/Down MaRk HoMe MoB (Man overBoard) Select MenU Lock 190-00856-00_0A.indd 26/22/2007 1:05:28 PM RF Remote Owner’s Manual BasIc operatIon Description of Buttons Pairing buttons—press and hold to pair a remote with a chartplotter. Press and release to select a paired chartplotter. Rocker—press up, down, left, and right to move the map pointer and enter data. SELECT—press to confirm messages and select items. MENU—press to view additional options on most screens. LOCK—press to lock all remote functions. Press again to unlock. The remote beeps when it is locked and a button is pressed. MOB (Man Overboard)—press to mark your current location as a Man Overboard point. HOME—press at any time to return to the Home screen. MARK—press to mark your current location as a Waypoint. Up/Down—press to highlight menu items. Range (+/-)— press up (+) and down (-) to increase and decrease the map zoom scale. Getting Started Use one of the three pairing buttons to pair your remote with a specific chartplotter. If you have more than one chartplotter, this allows you to separately control up to three chartplotters. To allow wireless connections on your chartplotter: 1. From the Home screen, select Configure > Communications > Wireless Devices. 2. Set Allow New Connections to Yes. 190-00856-00_0A.indd 36/22/2007 1:05:28 PM RF Remote Owner’s Manual BasIc operatIon To pair the remote with a chartplotter: 1. Press and hold one of the Pairing Buttons until “New Wireless Remote Found” appears on the chartplotter. Remote Found Message 2. Select Connect on your chartplotter. To select a chartplotter, press and release the Pairing Button that is paired with the chartplotter you want to control. Specifications Size: 135 mm H x 50 mm W x 25.7 mm D (5.3" x 2" x 1") Weight: 77 g (2.7 oz), without battery 101 g (3.6 oz), with batteries Case: waterproof to IEC 529-IPX-7 Frequency: 2.46 GHz Max Range: 10 m (32 ft); this value may vary slightly, depending on the installation of the chartplotter Battery Life: 100 days when used 15 minutes per day 3 years shelf life Operating Temperature Range: -15°C to 70°C (5°F to 158°F) Storage Temperature Range: -40°C to 85°C (-40°F to 185°F) • • • • • • • • 190-00856-00_0A.indd 46/22/2007 1:05:29 PM RF Remote Owner’s Manual specIfIcatIons FCC Compliance This product has been tested and found to comply with Part 15 of the FCC interference limits for Class B digital devices FOR HOME OR OFFICE USE. These limits are designed to provide more reasonable protection against harmful interference in a residential installation, and are more stringent than “outdoor” requirements. Operation of this device is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio communications if not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the…

Text truncated - open the document above for the full version.

Cover Letter(s)

June 30, 2007 Timco Engineering Inc. 849 NW State Road 45 Newberry, FL 32669 Applicant: Garmin International, Inc. 1200 East 151st Street Olathe, KS 66062 Re: Confidentiality for submittal information regarding FCC ID number IPH-01204 PRODUCT: Low power Transmitters operated under parts and 15.249. Dear Sirs: Garmin International, Inc. requests that the material in the Schematics, Operational Description, and block diagram be withheld from public disclosure in accordance with Section 0.459 of the Commissions Rules, 47 C.F.R. 0.459 (1998), following grant of the application. In support of this request, Garmin International, Inc. submits the following: Information to be held confidential Schematic 014-01204-00_vob.pdf Operational Description Operational Description.pdf Block Diagram FCC block diagram.pdf 1. Identification of the specific information for which confidential treatment is sought: The materials set fourth in the Operational Description, block diagram, and Schematics, which are segregated, from the non-confidential exhibits of the application, are those for which confidentiality is sought. 2. Identification of the Commission proceeding in which the information was submitted or a description of the circumstances giving rise to the submission: The proceeding is that involving the application for equipment authorization (certification) under FCC ID No: IPH-01204 3. Explanation of the degree to which the information is commercial or financial, or contains a trade secret or is privileged: This material includes a detailed theory of operation, circuit diagrams, and schematic. As such, this material is treated as highly confidential business information. ROGERS LABS, INC. 4405 West 259 th Terrace Louisburg, KS 66053 4. Explanation of the degree to which the information concerns a service that is subject to competition: The material for which confidentiality is sought is employed in the design and manufacture of this transmitting equipment that is offered on a highly competitive basis. Customers for this equipment have a variety of competing sources. 5. Explanation of how disclosure of the information could result in substantial competitive harm: Disclosure would, in effect, give away the fruits of the labors of Garmin International, Inc.’s engineering personnel, who have designed the equipment and the manufacturing process. Disclosure would also offer competitors additional unwarranted insight into the state of the product development, thereby allowing competitors an advantage, not available to Garmin International, Inc. 6. Identification of any measures taken by the submitting party to prevent unauthorized disclosure: The information for which confidential treatment is sought is kept confidential by Garmin International, Inc. and not made available to third parties except pursuant to non-disclosure agreements. 7. Identification of whether the information is available to the public and the extent of any previous disclosure of the information to third parties: To the knowledge of those preparing this application, the information has not been disclosed publicly heretofore. While the general theory of operation of this equipment has been the subject of numerous disclosures in industry and standards groups as well as in rule making proceedings of the FCC, the protection sought is narrowly drawn and pertains to certain specific implementations of this radio technology. 8. Justification of the period during which the submitting party asserts that the material should not be available for public disclosure: This material should not be disclosed for at least 25 years. While improvements in design are made relatively frequently, disclosure of the design information would lead to insights into both design and manufacturing techniques that could have an adverse competitive effect for many years to come. This equipment is designed for commercial, industrial, and governmental applications. As such, unlike most consumer equipment, this equipment could be used for more than a decade in some cases. As such, it is important that the design not be made available to unauthorized persons who might attempt to use knowledge of the design to compromise the applications for which the equipment will be employed. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Sincerely, Scot Rogers

Cover Letter(s)

ROGERS LABS, INC. 4405 West 259 th Terrace Louisburg, KS 66053 Phone / Fax (913) 837-3214 June 30, 2007 Timco Engineering Inc. Federal Communications Commission 849 NW State Road 45 Equipment Approval Services Newberry, FL 32669 P.O. Box 35815 Pittsburgh, PA 15251-3315 Applicant: Garmin International, Inc. 1200 East 151st Street Olathe, KS 66062 Equipment: FCC ID: IPH-01204 FCC Rules: Parts 2, 15.239 and 15.249 Gentlemen: The 731 form and application have been electronically submitted and any attachments will be up loaded to your web site to be used in obtaining a grant of certification. Confidentiality is requested as outlined below. Short-term Pursuant to DA 04-1705 of the Commission’s pubic notice, we request short-term confidential treatment for the following information until 45 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External Photos IPH 01204 Ext Photos.pdf Internal Photos IPH 01204 Internal Photos.pdf Test Setup Photos IPH 01204 Test Setup Photo.pdf User Manual 190-00856-00_0A.pdf Permanent Garmin International, Inc. requests that the material in the Schematics, block diagram, and Operational Description be withheld from public disclosure in accordance with Section 0.459 of the Commissions Rules, 47 C.F.R. 0.459, following grant of the application. It is requested that the information contained in the operational description, block diagram, parts list, and schematics of the application be held confidential per Section 0.459. A statement of confidentiality will be attached with the application at the time of submittal. Schematic 014-01204-00_vob.pdf Operational Description Operational Description.pdf Block Diagram FCC block diagram.pdf Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Sincerely, Scot Rogers Rogers Labs, Inc. Enclosures

External Photos

ID Label/Location Info

7/25/2007 To Whom It May Concern: The FCC identifier was located inside the battery compartment on this device because of limited areas. The device is small, handheld with many curved surfaces. The top side is mostly keypad and the bottom side removable battery compartment cover. The FCC identifier will be readily viewable as it will be visible each time the batteries are replaced in the device. Since the device will be sold without batteries installed the user will have to install batteries prior to using, thus they will see the FCC identifier prior to using the device for the first time. In addition to having the FCC identifier on the inside of the battery compartment, it will also be on the outside of the removable battery door, making it readily viewable at the time of purchase. Jamie Forrester Compliance Engineer Garmin International

Internal Photos

Parts List/Tune Up Info

RF Exposure Info

ROGERS LABS, INC. Garmin International, Inc. 4405 West 259 th Terrace MODEL: 011-01204-xx FCC ID#: IPH-01204 Louisburg, KS 66053 Test #:070621 SN: Proto 26 IC:1792A-01204 Phone/Fax: (913) 837-3214 Test to: CFR47, 2, 15.239, and 15.249, RSS-210 Page 1 of 1 IPH 01204 MPE 7/2/2007 MPE Calculation page Garmin International, Inc. Model: 01204 MPE CalculatorMPE uses EIRP for calculation. EIRP is based on TX power added to the antenna gain in dBi. dBi = dB gain compared to an isotropic radiator. S = power density in mW/cm^2 Antenna Gain (dBi)0 Output PowerdBd + 2.17 = dBidBi to dBd2.2 Tx Frequency (MHz)2460Average (Watts)0.0006Antenna Gain (dBd)-2.17 Cable Loss (dB)0.0(dBm)-2.33Antenna minus cable (dBi)0.00 Calculated ERP (mw) 0.355EIRP = Po(dBM) + Gain (dB) Calculated EIRP (mw) 0.585Radiated (EIRP) dBm-2.328 ERP = EIRP - 2.17 dB Occupational LimitRadiated (ERP) dBm-4.498 5.00000 mW/cm 2 General Public Limit 1.00000 mW/cm 2 Frequency (MHz)Occupational LimitPublic Limit 300-1,500f/300f/1500 1,500-10,00051 Frequency (MHz) Occupational Limit @ Tx Freq (mW/cm^2) Public Limit @ Tx Freq (mW/cm^2) 300-1,5008.21.64 1,500-10,00051 EIRPDistanceDistanceSDistance milliwattscminchesmW/cm 2 Feet 0.585100.0039.370.000003.28084 0.58590.0035.430.000012.952756 0.58580.0031.500.000012.624672 0.58570.0027.560.000012.296588 0.58560.0023.620.000011.968504 0.58550.0019.690.000021.64042 0.58540.0015.750.000031.312336 0.58530.0011.810.000050.984252 0.58525.009.840.000070.82021 0.58524.009.450.000080.787402 0.58523.009.060.000090.754593 0.58522.008.660.000100.721785 0.58521.008.270.000110.688976 0.58520.007.870.000120.656168 0.58519.007.480.000130.62336 0.58518.007.090.000140.590551 0.58517.006.690.000160.557743 0.58516.006.300.000180.524934 0.58515.005.910.000210.492126 0.58510.003.940.000470.328084 0.5859.003.540.000570.295276 0.5858.003.150.000730.262467 0.5857.002.760.000950.229659 0.5856.002.360.001290.19685 0.5855.001.970.001860.164042 0.5854.001.570.002910.131234 0.5853.001.180.005170.098425 0.5852.000.790.011640.065617 0.5851.000.390.046550.032808 0.5850.500.200.186210.016404 0.5850.250.100.744850.008202 Frequency (MHz) Occupational Limit minimum Distance (cm) Public Limit minimum distance (cm) 300-1,500N/AN/A 1,500-10,000N/A0.25 FCC radio frequency radiation exposure limits per 1.1310 FCC radio frequency radiation exposure limits per 1.1310 Power density (S) EIRP ------- = mW/cm^2 4 π r^2 r (cm) EIRP (mW)

Test Report

SUBMITTAL APPLICATION REPORT FOR GRANT OF CERTIFICATION CFR47, 15.249 and RSS-210 Low Power Transmitter FOR MODEL: 011-01204 2460 MHz Transmitter FOR GARMIN INTERNATIONAL, INC. 1200 East 151st Street Olathe, KS 66062 Test Report Number: 070621 NVLAP Accredited Laboratory NVLAP Lab Code: 200087-0 ROGERS LABS, INC. GARMIN INTERNATIONAL, INC. 4405 W. 259th Terrace MODEL: 011-01204 FCC ID#: IPH-01204 Louisburg, KS 66053 Test #: 070621 IC: 1792A-01204 Phone/Fax: (913) 837-3214 Test to: FCC 15c (15.249), IC RSS-210 Page 2 of 27 01101204 Tx Test Report 6/29/2007 ENGINEERING TEST REPORT FOR APLLICATION of GRANT of CERTIFICATION FOR CFR47, PART 15C - INTENTIONAL RADIATORS Paragraph 15.249, Low Power Transmitter Industry Canada, RSS-210 For GARMIN INTERNATIONAL, INC. 1200 East 151st Street Olathe, KS 66062 Doug Kealey, Model: 011-01204 wireless remote transmitter Frequency 2460 MHz FCC ID#: IPH-01204 Test Date: June 21, 2007 Certifying Engineer: Scot D. Rogers ROGERS LABS, INC. 4405 West 259 th Terrace Louisburg, KS 66053 Phone: (913) 837-3214 FAX: (913) 837-3214 This report shall not be reproduced except in full, without the written approval of the laboratory. This report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government. ROGERS LABS, INC. 4405 West 259 th Terrace Louisburg, KS 66053 Phone / Fax (913) 837-3214 NVLAP Accredited Laboratory NVLAP Lab Code: 200087-0 ROGERS LABS, INC. GARMIN INTERNATIONAL, INC. 4405 W. 259th Terrace MODEL: 011-01204 FCC ID#: IPH-01204 Louisburg, KS 66053 Test #: 070621 IC: 1792A-01204 Phone/Fax: (913) 837-3214 Test to: FCC 15c (15.249), IC RSS-210 Page 3 of 27 01101204 Tx Test Report 6/29/2007 TABLE OF CONTENTS FORWARD..................................................................................................................... 4 1) APPLICABLE STANDARDS & TEST PROCEDURES........................................... 4 2.1033(b) Application for Certification..........................................................................................................5 2) EQUIPMENT TESTED ............................................................................................ 6 3) EQUIPMENT FUNCTION AND TESTING PROCEDURES..................................... 6 4) EQUIPMENT AND CABLE CONFIGURATIONS .................................................... 7 Conducted Emission Test Procedure..................................................................................................................7 Radiated Emission Test Procedure.....................................................................................................................7 5) LIST OF TEST EQUIPMENT................................................................................... 8 6) UNITS OF MEASUREMENTS................................................................................. 9 7) TEST SITE LOCATIONS......................................................................................... 9 8) SUBPART B – UNINTENTIONAL RADIATORS .................................................... 9 Conducted EMI ....................................................................................................................................................9 Radiated EMI .....................................................................................................................................................10 General Radiated Emissions Data from EUT ....................................................................................................14 Summary of Results for Conducted Emissions ...............................................................................................14 Summary of Results for Radiated Emissions ..................................................................................................14 Statement of Modifications and Deviations .....................................................................................................14 9) SUBPART C - INTENTIONAL RADIATORS ........................................................ 14 15.203 Antenna Requirements ..........................................................................................................................15 15.205 Restricted Bands of Operation..............................................................................................................15 Radiated Emissions Data in Restricted Bands (15.205) ....................................................................................15 Summary of Results for Radiated Emissions in Restricted Bands ................................................................16 15.209 Radiated Emissions Limits; General Requirements ...........................................................................16 Radiated EMI.....................................................................................................................................................16 General Radiated Emissions Data from EUT (15.209) .....................................................................................17 Summary of Results for Radiated Emissions ..................................................................................................17 15.249 Operation in the Band 2400-2483.5 MHz ............................................................................................17 Radiated Emissions Data from EUT (15.249) ...................................................................................................18 Summary of Results for Radiated Emissions of Intentional Radiator ..........................................................22 Statement of Modifications and Deviations .....................................................................................................22 APPENDIX .................................................................................................................... 23 NVLAP Accredited Laboratory NVLAP Lab Code: 200087-0 ROGERS LABS, INC.…

Text truncated - open the document above for the full version.

Test Setup Photos