IPH-0183700LICENSED NON-BROADCAST AERONAUTICAL TRANSMITTER

190-00303-24January, 2012Revision A GDR 66 Transceiver Installation Manual DRAFT Page AGDR 66 Installation Manual Revision A190-00303-24 © Copyright 2011 Garmin Ltd. or its subsidiaries All Rights Reserved Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual and of any revision to this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual or revision must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Garmin International, Inc. 1200 E. 151st Street Olathe, KS 66062 USA Telephone: 913.397.8200 Aviation Panel-Mount Technical Support Line (Toll Free) 1.888.606.5482 www.garmin.com Garmin (Europe) Ltd. Liberty House, Bulls Copse Road Hounsdown Business Park Southampton, SO40 9RB U.K. +44/ (0) 870.8501241 Garmin AT, Inc. 2345 Turner Rd., SE Salem, OR 97302 USA Telephone: 503.581.8101 RECORD OF REVISIONS Revision Revision DateDescription A01/17/2012Initial Release DRAFT GDR 66 Installation ManualPage i 190-00303-24Revision A INFORMATION SUBJECT TO EXPORT CONTROL LAWS This document may contain information which is subject to the Export Administration Regulations ("EAR") issued by the United States Department of Commerce (15 CFR, Chapter VII, Subchapter C) and which may not be exported, released, or disclosed to foreign nationals inside or outside of the United States without first obtaining an export license. The preceding statement is required to be included on any and all reproductions in whole or in part of this manual. This product, its packaging, and its components contain chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. This Notice is being provided in accordance with California's Proposition 65. If you have any questions or would like additional information, please refer to our web site at www.garmin.com/prop65 . CURRENT REVISION DESCRIPTION DOCUMENT PAGINATION WARNING Revision Page Number(s) Section Number Description of Change AAllAllInitial release SectionPage Range Table of Contents i – vi Section 11-1 – 1-8 Section 22-1 – 2-4 Section 33-1 – 3-4 Section 4 4-1 – 4-10 Appendix AA-1 – A-3 Appendix BB-1 – B-3 DRAFT Page iiGDR 66 Installation Manual Revision A190-00303-24 TABLE OF CONTENTS PARAGRAPHPA GE Section 1 GENERAL DESCRIPTION............................................................. 1-1 1.1 Introduction ..................................................................................................................... 1-1 1.2 Equipment Description................................................................................................... 1-1 1.3 Interface Summary .........................................................................................................1-1 1.4 Technical Specifications ................................................................................................. 1-2 1.4.1 Environmental Qualification Form ..................................................................................... 1-2 1.4.2 Physical Characteristics ...................................................................................................... 1-2 1.4.3 General Specifications ........................................................................................................ 1-2 1.4.4 Power Requirements ........................................................................................................... 1-3 1.4.5 Transmitter Power Versus Aircraft Bus Voltage ................................................................ 1-3 1.4.6 COM Transceiver Specifications ........................................................................................ 1-4 1.4.7 Digital Transceiver Characteristics.....................................................................................1-4 1.4.8 License Requirements ......................................................................................................... 1-6 1.5 Certification..................................................................................................................... 1-6 1.5.1 TSO/ETSO Compliance......................................................................................................1-7 1.5.2 TSO/ETSO Deviations........................................................................................................ 1-7 1.6 Reference Documents ..................................................................................................... 1-7 1.7 Aviation Limited Warranty ............................................................................................. 1-8 Section 2 INSTALLATION OVERVIEW ....................................................... 2-1 2.1 Introduction ..................................................................................................................... 2-1 2.2 Installation Materials....................................................................................................... 2-1 2.2.1 Equipment Available .......................................................................................................... 2-1 2.2.2 Additional Equipment Required ......................................................................................... 2-1 2.3 Installation Considerations.............................................................................................. 2-2 2.3.1 Antenna Considerations ...................................................................................................... 2-2 2.3.2 Com Antenna Location ................…

Text truncated - open the document above for the full version.

February 1, 2012 Timco Engineering Inc. 849 NW State Road 45 Newberry, FL 32669 Applicant: Garmin International, Inc. 1200 East 151st Street Olathe, KS 66062 Re: Confidentiality for submittal information regarding FCC ID number IPH-0183700 PRODUCT: Aviation Transmitters operated under part 87 Dear Sirs: Garmin International, Inc. requests that the material in the Parts List, Schematics, Block Diagram, and Operational Description be withheld from public disclosure pursuant to Sections 0.457 and 0.459 of the Commission’s Rules following grant of the application. In support of this request, Garmin International, Inc. submits the following information. CONFIDENTIAL FILES Exhibit File Schematic Conf Schem IPH0183700.pdf Block diagram Conf BlkDia IPH0183700.pdf Operational Description Conf OpDesc IPH0183700.pdf Parts List Conf PartList IPH0183700.pdf 1. Identification of the specific information for which confidential treatment is sought: The materials set fourth in the Operational Description, block diagram, parts list, and Schematics, which are segregated, from the non-confidential exhibits of the application, are those for which confidentiality is sought. 2. Identification of the Commission proceeding in which the information was submitted or a description of the circumstances giving rise to the submission: The proceeding is that involving the application for equipment authorization (certification) under FCC ID No: IPH-0183700 ROGERS LABS, INC. 4405 West 259 th Terrace Louisburg, KS 66053 913 837-3214 3. Explanation of the degree to which the information is commercial or financial, or contains a trade secret or is privileged: This material includes a detailed theory of operation, circuit diagrams, and schematic. As such, this material is treated as highly confidential business information. 4. Explanation of the degree to which the information concerns a service that is subject to competition: The material for which confidentiality is sought is employed in the design and manufacture of this transmitting equipment that is offered on a highly competitive basis. Customers for this equipment have a variety of competing sources. 5. Explanation of how disclosure of the information could result in substantial competitive harm: Disclosure would, in effect, give away the fruits of the labors of Garmin International, Inc.’s engineering personnel, who have designed the equipment and the manufacturing process. Disclosure would also offer competitors additional unwarranted insight into the state of the product development, thereby allowing competitors an advantage, not available to Garmin International, Inc. 6. Identification of any measures taken by the submitting party to prevent unauthorized disclosure: The information for which confidential treatment is sought is kept confidential by Garmin International, Inc. and not made available to third parties except pursuant to non-disclosure agreements. 7. Identification of whether the information is available to the public and the extent of any previous disclosure of the information to third parties: To the knowledge of those preparing this application, the information has not been disclosed publicly heretofore. While the general theory of operation of this equipment has been the subject of numerous disclosures in industry and standards groups as well as in rule making proceedings of the FCC, the protection sought is narrowly drawn and pertains to certain specific implementations of this radio technology. 8. Justification of the period during which the submitting party asserts that the material should not be available for public disclosure: This material should not be disclosed for at least 25 years. While improvements in design are made relatively frequently, disclosure of the design information would lead to insights into both design and manufacturing techniques that could have an adverse competitive effect for many years to come. As such, it is important that the design not be made available to unauthorized persons who might attempt to use knowledge of the design to compromise the applications for which the equipment will be employed. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Sincerely, Scot Rogers

March 21, 2012 Timco Engineering Inc. 849 NW State Road 45 Newberry, FL 32669 Applicant: Garmin International, Inc. Equipment: FCC ID: IPH-0183700 1200 East 151st Street CORES number: 0005-0885-88 Olathe, KS 66062 Re: Short-term Confidentiality request for submittal information regarding FCC ID: IPH-0183700 Product: Aviation Transmitters operated under part 87 Dear Sirs: Garmin International, Inc. requests that the following information be withheld from public disclosure pursuant to CFR47 paragraphs 0.457 and 0.459, and KDB 726920 until 180 days after the Grant of Equipment Authorization. Disclosure of information would offer competitors additional unwarranted insight into the state of the product development. Short-term confidential files Exhibit File External Photos Short Term Conf ExtPho IPH0183700.pdf Internal Photos Short Term Conf IntPho IPH0183700.pdf Test Setup Photos Short Term Conf TSup IPH0183700.pdf User Manual Short Term Conf UserMan IPH0183700 1.pdf Permanent Confidential files Exhibit File Schematic Conf Schem IPH0183700.pdf Block diagram Conf BlkDia IPH0183700.pdf Operational Description Conf OpDesc IPH0183700.pdf Parts List Conf PartList IPH0183700.pdf Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Sincerely, Scot Rogers ROGERS LABS, INC. 4405 West 259 th Terrace Louisburg, KS 66053

March 21, 2012 Timco Engineering Inc. 849 NW State Road 45 Newberry, FL 32669 Applicant: Garmin International, Inc. Equipment: FCC ID: IPH-0183700 1200 East 151st Street CORES number: 0005-0885-88 Olathe, KS 66062 FCC Rules: Parts 2 and 87 Men: The form 731 and application have been electronically submitted and any attachments will be up loaded to your web site to be used in obtaining a grant of certification. Confidentiality is requested as outlined below. Short-term confidential files Garmin International, Inc. requests that the following information be withheld from public disclosure pursuant to CFR47 paragraphs 0.457 and 0.459, and KDB 726920 until 45 days after the Grant of Equipment Authorization. Exhibit File External Photos Short Term Conf ExtPho IPH0183700.pdf Internal Photos Short Term Conf IntPho IPH0183700.pdf Test Setup Photos Short Term Conf TSup IPH0183700.pdf User Manual Short Term Conf UserMan IPH0183700 1.pdf Permanent Garmin International, Inc. requests that the material in the Parts List, Schematics, Block Diagram, and Operational Description be withheld from public disclosure pursuant to Sections 0.457 and 0.459 of the Commission’s Rules following grant of the application. A statement of confidentiality will be attached with the application at the time of submittal. Exhibit File Schematic Conf Schem IPH0183700.pdf Block diagram Conf BlkDia IPH0183700.pdf Operational Description Conf OpDesc IPH0183700.pdf Parts List Conf PartList IPH0183700.pdf Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Sincerely, Scot Rogers Rogers Labs, Inc. Enclosures ROGERS LABS, INC. 4405 West 259 th Terrace Louisburg, KS 66053 Phone / Fax (913) 837-3214

Rogers Labs, Inc. Garmin International, Inc. Market Label: GDR 66 4405 West 259 th Terrace IC M/N: GMN-00832 SN: 222000037 FCC ID: IPH-0183700 Louisburg, KS 66053 Test #: 120119 IC: 1792A-0183700 Phone/Fax: (913) 837-3214 Test to: FCC Parts 2, 15, 87, and RSS-141 Date: March 20, 2012 Revision 1 File: Short Term Conf ExtPho IPH0183700 Page: 1 of 2 Equipment photographs Rogers Labs, Inc. Garmin International, Inc. Market Label: GDR 66 4405 West 259 th Terrace IC M/N: GMN-00832 SN: 222000037 FCC ID: IPH-0183700 Louisburg, KS 66053 Test #: 120119 IC: 1792A-0183700 Phone/Fax: (913) 837-3214 Test to: FCC Parts 2, 15, 87, and RSS-141 Date: March 20, 2012 Revision 1 File: Short Term Conf ExtPho IPH0183700 Page: 2 of 2

Rogers Labs, Inc. Garmin International, Inc. Market Label: GDR 66 4405 West 259 th Terrace IC M/N: GMN-00832 SN: 222000037 FCC ID: IPH-0183700 Louisburg, KS 66053 Test #: 120119 IC: 1792A-0183700 Phone/Fax: (913) 837-3214 Test to: FCC Parts 2, 15, 87, and RSS-141 Date: March 20, 2012 Revision 1 File:LabelSmpl IPH0183700 Page: 1 of 2 ID label location and sample Label Placement Rogers Labs, Inc. Garmin International, Inc. Market Label: GDR 66 4405 West 259 th Terrace IC M/N: GMN-00832 SN: 222000037 FCC ID: IPH-0183700 Louisburg, KS 66053 Test #: 120119 IC: 1792A-0183700 Phone/Fax: (913) 837-3214 Test to: FCC Parts 2, 15, 87, and RSS-141 Date: March 20, 2012 Revision 1 File:LabelSmpl IPH0183700 Page: 2 of 2 Label Placement

GDR66 Sub-Sys Alignment Procedure Garmin Ltd. or its subsidiaries c/o Garmin International, Inc. 1200 E. 151st Street Olathe, KS 66062 U.S.A. Drawing Number 005-00548-03 Rev. 2 File Type: MS Word Rev. Date Description of Change ECO # 1 1/03/2011 Initial Release ----- 2 5/02/2011 Add auto-align. Misc other changes. 81182 Confidential This drawing and these specifications contained herein are the property of Garmin Ltd. or its subsidiaries and may not be reproduced or used in whole or in part as the basis for manufacture or sale of products without written permission. Approvals Date Drawn MAH 1/3/2011 Checked JHE 1/3/11 Proj. Mgr. DDC 1/3/11 Released MKD 1/4/11 GDR66 Sub-Sys Alignment Procedure 005-00548-03 Rev. 2 Page i TABLE OF CONTENTS 1. SCOPE OF DOCUMENT 1 2. REFERENCES 1 3. EQUIPMENT SETUP 1 3.1 UNIT CONFIGURATION 1 3.2 AUTOMATED ALIGNMENT EQUIPMENT SETUP 1 3.2.1 Automated Alignment Equipment List 1 3.2.2 Automated Alignment Equipment Setup Diagram 2 3.2.3 Automated Alignment Equipment Setup Procedure 2 3.3 MANUAL ALIGNMENT EQUIPMENT SETUP 2 3.3.1 Manual Alignment Equipment List 2 3.3.2 Manual Alignment Equipment Setup Diagram 2 3.3.3 Manual Alignment Equipment Setup Procedure 2 4. AUTOMATED ALIGNMENT PROCEDURE 3 4.1 AUTOMATED ALIGNMENT PROCEDURE 3 4.1.1 GDR66 Automated Ambient Alignment Procedure 3 4.1.2 GDR66 Automated COLD Alignment Procedure 4 5. MANUAL ALIGNMENT PROCEDURE 5 5.1 MANUAL ALIGNMENT UNIT SETUP PROCEDURE 5 5.2 GDR66 MANUAL AMBIENT ALIGNMENT PROCEDURE 6 5.2.1 GDR66 COM Configuration Parameters Initialization Procedure 6 5.2.2 GDR66 COM Digital Board Manual Alignment Procedure 6 5.2.2.1 Reference Oscillator Frequency Adjustment 6 5.2.3 GDR66 COM Receiver Manual Alignment Procedure 7 5.2.3.1 Receiver Preselect Filter # 1 Alignment 7 5.2.3.2 Receiver Preselect Filter # 2 Alignment 8 5.2.3.3 Receiver Preselect Filter # 3 Alignment 11 5.2.3.4 Receiver Signal Strength Alignment 11 5.2.3.5 Receiver Audio / ACARS Output Alignment 12 5.2.3.6 Receiver Squelch Alignment 13 5.2.3.7 Receiver Correlation Threshold Adjustment 15 5.2.3.8 Remote Transfer Mode 15 5.2.4 GDR66 COM Transmitter Manual Alignment Procedure 15 5.2.4.1 DC‐DC Converter Alignment 15 5.2.4.2 Transmitter IQ Offset Alignment 16 5.2.4.3 Transmitter Channel Spacing 17 5.2.4.4 Audio Input Gain Adjustments 17 5.2.4.5 Transmitter Power Alignment 17 5.2.4.6 Transmitter Sidetone Level 19 5.2.4.7 CSMA Offset Adjustment 20 5.3 GDR66 MANUAL COLD ALIGNMENT PROCEDURE 20 5.3.1 Receiver Signal Strength Alignment 20 GDR66 Sub-Sys Alignment Procedure 005-00548-03 Rev. 2 Page 1 1. SCOPE OF DOCUMENT This document describes the necessary equipment and procedures required to properly align a set of GDR66 COM Digital and GDR66 COM RF boards installed in the GDR66 assemblies. Both automated alignment and manual alignment procedures are presented. For each case, the alignment is to be performed after board assembly and before Final Test. It should be followed in the sequence presented. Unit Part Number: COM Digital Board Part Number: COM RF Board Part Number: 011-02303-( ) 012-01836-( ) 012-01837-( ) 2. REFERENCES 1) 004-00501-00, “MPS, GDR66” 2) 005-00548-00, “GDR66 Test Procedure” 3) 005-00548-80, “GDR66 Sub-System Requirements” 4) 005-00548-04, “GDR66 Sub-System HW Requirements” 3. EQUIPMENT SETUP 3.1 Unit Configuration In order to perform alignment of the GDR66 COM Digital and RF modules in the GDR66, the unit must be assembled and configured per the unit assembly BOM: • 011-02303-( ) – Sub-Assy, GDR66, Final 3.2 Automated Alignment Equipment Setup This section describes the equipment setup necessary to perform an automated alignment of the COM Digital and RF boards in the GDR66. 3.2.1 Automated Alignment Equipment List The equipment list for automated alignment can be found in the following documents: • T00-00415-00, “GDR66 ATE/MNL Test Setup” Additionally, the following software must be installed on the auto-align rack’s PC: • T06-A0247-00, “GDR66 Production ATE Software” GDR66 Sub-Sys Alignment Procedure 005-00548-03 Rev. 2 Page 2 3.2.2 Automated Alignment Equipment Setup Diagram The setup diagram for automated alignment can be found in the following document: • T00-00415-00, “GDR66 ATE/MNL Test Setup” 3.2.3 Automated Alignment Equipment Setup Procedure The setup procedure for automated alignment is to connect the equipment as shown in the following document: • T00-00415-00, “GDR66 ATE/MNL Test Setup” 3.3 Manual Alignment Equipment Setup This section describes the equipment setup necessary to perform a manual alignment of the COM Digital and RF boards in the GDR66 3.3.1 Manual Alignment Equipment List The equipment list for manual alignment can be found in the following documents: • T00-00415-00, “GDR66 ATE/MNL Test Setup” Additionally, the following software must be installed on the auto-align rack’s PC: • “GDRMON SW” Click on the following link for more information: GDR Mon Installation and Usage Instructions.docx 3.3.2 Manual Alignment Equipment Setup Diagram The setup diagram for manual alignment can be found in the following document: • T00-00415-00, “GDR66 ATE/MNL Test Setup” Each manual alignment procedure sub-section will specify any deviations from the setup in T00-00415- 00. 3.3.3 Manual Alignment Equipment Setup Procedure The setup procedure for manual alignment is to connect the equipment as shown in the following document: • T00-00415-00, “GDR66 ATE/MNL Test Setup” Each manual alignment procedure sub-section will specify any deviations from the setup procedure in T00-00415-00. GDR66 Sub-Sys Alignment Procedure 005-00548-03 Rev. 2 Page 3 4. AUTOMATED ALIGNMENT PROCEDURE 4.1 Automated Alignment Procedure 4.1.1 GDR66 Automated Ambient Alignment Procedure 1) Open TestStand on the ATE computer. 2) From TestStand, open the “GDR66Test.seq” sequence file from the C:\SWENG\ATE\GDR66 directory. 3) From the TestStand main screen select "Test UUTs (F5)". 4) On the TestStand “UUT Information” screen enter the unit Serial Number, se…

Text truncated - open the document above for the full version.

Rogers Labs, Inc. Garmin International, Inc. Market Label: GDR 66 4405 West 259 th Terrace IC M/N: GMN-00832 SN: 222000037 FCC ID: IPH-0183700 Louisburg, KS 66053 Test #: 120119 IC: 1792A-0183700 Phone/Fax: (913) 837-3214 Test to: FCC Parts 2, 15, 87, and RSS-141 Date: March 20, 2012 Revision 1 File:RFExp IPH0183700 Page: 1 of 1 MPE calculations

NVLAP Lab Code 200087-0 Rogers Labs, Inc. Garmin International, Inc. Market Label: GDR 66 4405 West 259 th Terrace IC M/N: GMN-00832 SN: 222000037 FCC ID: IPH-0183700 Louisburg, KS 66053 Test #: 120119 IC: 1792A-0183700 Phone/Fax: (913) 837-3214 Test to: FCC Parts 2, 15, 87, and RSS-141 Date: March 20, 2012 Revision 1 File: GMN00832 GDR66 0183700 TstRpt 120119 Page 1 of 43 Application for Grant of Certification FCC CFR47 Part 87 and Industry Canada RSS-141 GMN-00832 Market Label: GDR 66 IC M/N: GMN-00832 GPN: 011-02303-0( ) 118-136.992 MHz Aviation Communications Transceiver FCC ID: IPH-0183700 IC: 1792A-0183700 For Garmin International, Inc. 1200 East 151st Street Olathe, KS 66062 Test Report Number 120119 Authorized Signatory: Scot D. Rogers NVLAP Lab Code 200087-0 Rogers Labs, Inc. Garmin International, Inc. Market Label: GDR 66 4405 West 259 th Terrace IC M/N: GMN-00832 SN: 222000037 FCC ID: IPH-0183700 Louisburg, KS 66053 Test #: 120119 IC: 1792A-0183700 Phone/Fax: (913) 837-3214 Test to: FCC Parts 2, 15, 87, and RSS-141 Date: March 20, 2012 Revision 1 File: GMN00832 GDR66 0183700 TstRpt 120119 Page 2 of 43 Test Report For Application of Certification For Garmin International, Inc. 1200 East 151st Street Olathe, KS 66062 Phone: (913) 397-8200 Mr. Van Ruggles Director of Quality Assurance Market Label: GDR 66 IC M/N: GMN-00832 GPN: 011-02303-0( ) Aviation Communications Transceiver Frequency Range: 118-136.992 MHz FCC ID: IPH-0183700 IC: 1792A-0183700 Test Date: January 19, 2012 Certifying Engineer: Scot D. Rogers Rogers Labs, Inc. 4405 West 259th Terrace Louisburg, KS 66053 Telephone/Facsimile: (913) 837-3214 This report shall not be reproduced except in full, without the written approval of the laboratory. This report must not be used by the client to claim product endorsement by NVLAP, NIST, or any agency of the U.S. Government. Rogers Labs, Inc. 4405 West 259th Terrace Louisburg, KS 66053 Phone / Fax (913) 837-3214 NVLAP Lab Code 200087-0 Rogers Labs, Inc. Garmin International, Inc. Market Label: GDR 66 4405 West 259 th Terrace IC M/N: GMN-00832 SN: 222000037 FCC ID: IPH-0183700 Louisburg, KS 66053 Test #: 120119 IC: 1792A-0183700 Phone/Fax: (913) 837-3214 Test to: FCC Parts 2, 15, 87, and RSS-141 Date: March 20, 2012 Revision 1 File: GMN00832 GDR66 0183700 TstRpt 120119 Page 3 of 43 Table of Contents TABLE OF CONTENTS .................................................................................................. 3 FORWARD ..................................................................................................................... 6 OPINION / INTERPRETATION OF RESULTS ............................................................... 6 APPLICABLE STANDARDS & TEST PROCEDURES .................................................. 6 ENVIRONMENTAL CONDITIONS.................................................................................. 6 APPLICATION FOR CERTIFICATION ........................................................................... 7 UNITS OF MEASUREMENTS ........................................................................................ 9 TEST SITE LOCATIONS ................................................................................................ 9 LIST OF TEST EQUIPMENT .......................................................................................... 9 SYSTEM DESCRIPTION .............................................................................................. 10 TRANSMITTER POWER OUTPUT .............................................................................. 11 Measurements Required ...................................................................................................................................... 11 Test Arrangement ................................................................................................................................................. 11 Transmitter Power Results .................................................................................................................................. 12 Figure 1 Maximum Power Output (28 Volt Input) ............................................................................................ 12 Figure 2 Maximum Power Output (14 Volt Input) ............................................................................................ 13 MODULATION CHARACTERISTICS ........................................................................... 13 Measurements Required ...................................................................................................................................... 13 Test Arrangement ................................................................................................................................................. 13 Modulation Characteristic Results ...................................................................................................................... 14 Figure 3 Audio Frequency Response / Modulation Characteristics ................................................................... 14 Figure 4 Modulation Characteristics .................................................................................................................. 15 Figure 5 Frequency Response of Audio Low pass Filter ................................................................................... 15 OCCUPIED BANDWIDTH ............................................................................................ 16 Measurements Required ...................................................................................................................................... 16 NVLAP Lab Code 200087-0 Rogers Labs, Inc. Garmin International, Inc. Market Label: GDR 66 4405 West 259 th Terrace IC M/N: GMN-00832 SN: 222000037 FCC ID: IPH-0183700 Louisburg, KS 66053 Test #: 120119 IC: 1792A-0183700 Phone/Fax: (913) 837-3214 Test to: FCC Parts 2, 15, 87, and RSS-141 Date: March 20, 2012 Revision 1 File: GMN00832 GDR66 0183700 TstRpt 12…

Text truncated - open the document above for the full version.

Rogers Labs, Inc. Garmin International, Inc. Market Label: GDR 66 4405 West 259 th Terrace IC M/N: GMN-00832 SN: 222000037 FCC ID: IPH-0183700 Louisburg, KS 66053 Test #: 120119 IC: 1792A-0183700 Phone/Fax: (913) 837-3214 Test to: FCC Parts 2, 15, 87, and RSS-141 Date: March 20, 2012 Revision 1 File: Short Term Conf TSup IPH0183700 Page: 1 of 1 Test Setup Photographs