IPH-03309VHF Aviation Transmitter

190-02327-03 Rev. 1Pilot’s Guideix Warnings, Cautions, and Notes WARNING Do not use terrain avoidance displays as the sole source of information for maintaining separation from terrain and obstacles. Garmin obtains terrain and obstacle data from third party sources and cannot independently verify the accuracy of the information. WARNING Do not rely solely upon Terrain Proximity data for terrain avoidance. Terrain Proximity is not a certified terrain awareness system. It is an aid to situational awareness only. Using Terrain Proximity data does not under any circumstances or conditions relieve the pilot’s responsibility to see and avoid terrain or obstacles. WARNING Do not use TAWS information for primary terrain or obstacle avoidance. TAWS is intended only to enhance situational awareness. WARNING Always refer to current aeronautical charts and NOTAMs for verification of displayed aeronautical information. Displayed aeronautical data may not incorporate the latest NOTAM information. WARNING Never use GPS altitude for vertical navigation, traffic avoidance, or compliance with any air traffic control clearance. The altitude calculated by GPS receivers is geometric height above Mean Sea Level and may vary significantly from the altitude displayed on the primary barometric altimeter. The barometric altimeter must be used to comply with all air traffic control clearances. WARNING Never use expired databases. Update databases regularly to ensure currency. Use out of date database information at your own risk. Draft Copy 11/05/19 xPilot’s Guide190-02327-03 Rev. 1 Warnings, Cautions, and Notes WARNING Never use basemap information (land and water data) as the sole means of navigation. Basemap data is intended only to supplement other approved navigation data sources and should be considered only an aid to enhance situational awareness. WARNING Do not rely solely upon the display of traffic information to accurately depict all of the traffic within range of the aircraft. Due to lack of equipment, poor signal reception, and/or inaccurate information from aircraft or ground stations, traffic may be present that is not represented on the display. WARNING Do not rely solely upon the display of traffic information for collision avoidance maneuvering. The traffic display does not provide collision avoidance resolution advisories and does not under any circumstances or conditions relieve the pilot’s responsibility to see and avoid other aircraft. WARNING Never use datalink weather information for maneuvering in, near, or around areas of hazardous weather. Information contained within datalink weather products may not accurately depict current weather conditions. WARNING Never use datalink weather information for entering a thunderstorm. Per the FAA’s Aeronautical Information Manual (AIM) and AC 00-24C: “avoid by at least 20 miles any thunderstorm identified as severe or giving an intense radar echo.” WARNING Do not use the indicated datalink weather product age to determine the age of the weather information shown by the datalink weather product. Due to time delays inherent in gathering and processing weather data for datalink transmission, the weather information shown by the datalink weather product may be older than the indicated weather product age. WARNING Do not rely solely upon Datalink services to provide TFR information. Always confirm TFR information through official sources such as flight service stations or air traffic control. Draft Copy 11/05/19 190-02327-03 Rev. 1Pilot’s Guidexi Warnings, Cautions, and Notes WARNING Do not rely on information from a lightning detection system display as the sole basis for hazardous weather avoidance. Range limitations and interference may cause the system to display inaccurate or incomplete information. Refer to documentation from the lightning detection system manufacturer for detailed information about the system. WARNING Always refer to current aeronautical charts for appropriate minimum clearance altitudes. The displayed MSAs are only advisory in nature and should not be relied upon as the sole source of obstacle and terrain avoidance information. WARNING Do not use GPS to navigate to any active waypoint identified as a “NON WGS84 WPT” by a system message. “NON WGS84 WPT” waypoints are derived from an unknown map reference datum that may be incompatible with the map reference datum used by GPS (known as WGS84) and may be positioned in error as displayed. WARNING Do not learn operational procedures for this product in the air. For safety reasons, thoroughly practice basic operation of this product on the ground before use during flight. WARNING Review and understand all aspects of this pilot’s guide. Doing so reduces the risk of unsafe operation. WARNING Always resolve any discrepancies between the display and other navigation sources when they occur. During flight operations, compare display indications to information from other NAVAIDs, visual sightings, charts, and other available sources before continuing navigation. Draft Copy 11/05/19 xiiPilot’s Guide190-02327-03 Rev. 1 Warnings, Cautions, and Notes CAUTION Do not clean display surfaces with abrasive cloths or cleaners containing ammonia. They will harm the anti-reflective coating. Use a clean, lint-free cloth and anti-reflective lens cleaner. CAUTION Ensure that any unit repairs are made by an authorized Garmin service center. Unauthorized repairs or modifications could void both the warranty and affect the airworthiness of the aircraft. NOTE The unit may not respond to touch commands if condensation or moisture accumulate on the touchscreen. NOTE The COM application supports channel tuning for both 8.33 kHz and 25 kHz channels within radio-frequency range. If flying in a region where 8.33 kHz channel spacing is available, set the COM radio to 8.33 kHz to prevent the loss of any stored or recently used frequencies. NOTE The COM transceiver antenna(s) of the equipment mount along the fuselage and…

Text truncated - open the document above for the full version.

Industry Canada Notice Canadian Customers: Insert this notice in the Pilot’s Guide Canadian installations: In accordance with Canadian Radio Specifications Standard 102 (RSS 102), RF field strength exposure to persons from an antenna connected to this device should be limited to 60V/m for controlled environment and 28 V/m for uncontrolled environment. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. 190-01345-01 Rev A November 2019 Industry Canada Notice Canadian Customers: Insert this notice in the Pilot’s Guide Canadian installations: In accordance with Canadian Radio Specifications Standard 102 (RSS 102), RF field strength exposure to persons from an antenna connected to this device should be limited to 60V/m for controlled environment and 28 V/m for uncontrolled environment. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. 190-01345-01 Rev A November 2019 Industry Canada Notice Canadian Customers: Insert this notice in the Pilot’s Guide Canadian installations: In accordance with Canadian Radio Specifications Standard 102 (RSS 102), RF field strength exposure to persons from an antenna connected to this device should be limited to 60V/m for controlled environment and 28 V/m for uncontrolled environment. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. 190-01345-01 Rev A November 2019 Industry Canada Notice Canadian Customers: Insert this notice in the Pilot’s Guide Canadian installations: In accordance with Canadian Radio Specifications Standard 102 (RSS 102), RF field strength exposure to persons from an antenna connected to this device should be limited to 60V/m for controlled environment and 28 V/m for uncontrolled environment. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. 190-01345-01 Rev A November 2019 Avis d’Industrie Canada Clients du Canada : insérez cet avis dans le guide du pilote Sites au Canada : conformément au Cahier des charges canadien sur les normes radioélectriques 102 (CNR 102), l’exposition humaine au champ RF émis par une antenne branchée sur cet appareil doit être limitée à une intensité de 60 V/m en environnement contrôlé et de 28 V/m en environnement non contrôlé. Selon les règlements d’Industrie Canada, cet émetteur radioélectrique ne peut fonctionner qu’avec une antenne du type et du gain maximal (ou inférieur) approuvés pour l’émetteur par Industrie Canada. Afin de réduire les interférences radioélectriques potentielles pour les autres utilisateurs, le type et le gain de l’antenne doivent également être tels que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas celle nécessaire à la bonne communication. Cet appareil est conforme aux normes CRN d’Industrie Canada relatives aux appareils exempts de licence. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d’interférences; et (2) cet appareil doit accepter toutes les interférences reçues, y compris celles qui sont susceptibles de nuire à son bon fonctionnement. 190-01345-01 Rev A November 2019 Avis d’Industrie Canada Clients du Canada : insérez cet avis dans le guide du pilote Sites au Canada : conformément au Cahier des charges canadien sur les normes radioélectriques 102 (CNR 102), l’exposition humaine au champ RF émis par une antenne branchée sur cet appareil doit être limitée à une intensité de 60 V/m en environnement contrôlé et de 28 V/m en environnement non contrôlé. Selon les règlements d’Industrie Canada, …

Text truncated - open the document above for the full version.

Page 1 of 2 December 2, 2019 Timco Engineering Inc. 849 NW State Road 45 Newberry, FL 32669 Applicant: Garmin International, Inc. 1200 East 151st Street Olathe, KS 66062 Re: Confidentiality for submittal information regarding FCC ID: IPH-03309 Product: Transmitter operated under 47CFR paragraph 87 Dear Sirs: Garmin International, Inc. requests that the material in the Block Diagram, Operational Description, Parts List, Schematics, and Tune Up Procedure be withheld from public disclosure pursuant to Sections 0.457 and 0.459 of the Commission’s Rules following grant of the application. In support of this request, Garmin International, Inc. submits the following information. Exhibit File Block Diagram GMN02002 TNB Conf BlkDia.pdf Operational Description GMN02002 TNB Conf OpDes.pdf Parts List GMN02002 TNB Conf PartsList.pdf Schematics GMN02002 TNB Conf Schem.pdf Tune Up Procedure GMN02002 TNB Conf TunPro.pdf 1. Identification of the specific information for which confidential treatment is sought: The materials set forth in the Block Diagram, Operational Description, Parts List, Schematics and Tune Procedure which are segregated from the non-confidential exhibits of the application are those for which confidentiality is sought. 2. Identification of the Commission proceeding in which the information was submitted or a description of the circumstances giving rise to the submission: The proceeding is that involving the application for equipment authorization (certification) under FCC ID: IPH-03309 3. Explanation of the degree to which the information is commercial or financial, or contains a trade secret or is privileged: This material includes a detailed theory of operation, circuit diagrams, parts list, schematic, and tune procedure. As such, this material is treated as highly confidential business information. ROGERS LABS, INC. 4405 West 259 th Terrace Louisburg, KS 66053 913 837-3214 Page 2 of 2 4. Explanation of the degree to which the information concerns a service that is subject to competition: The material for which confidentiality is sought is employed in the design and manufacture of this transmitting equipment that is offered on a highly competitive basis. Customers for this equipment have a variety of competing sources. 5. Explanation of how disclosure of the information could result in substantial competitive harm: Disclosure would, in effect, give away the fruits of the labors of Garmin International, Inc.’s engineering personnel, who have designed the equipment and the manufacturing process. Disclosure would also offer competitors additional unwarranted insight into the state of the product development, thereby allowing competitors an advantage, not available to Garmin International, Inc. 6. Identification of any measures taken by the submitting party to prevent unauthorized disclosure: The information for which confidential treatment is sought is kept confidential by Garmin International, Inc. and not made available to third parties except pursuant to non-disclosure agreements. 7. Identification of whether the information is available to the public and the extent of any previous disclosure of the information to third parties: To the knowledge of those preparing this application, the information has not been disclosed publicly heretofore. While the general theory of operation of this equipment has been the subject of numerous disclosures in industry and standards groups as well as in rule making proceedings of the FCC, the protection sought is narrowly drawn and pertains to certain specific implementations of this radio technology. 8. Justification of the period during which the submitting party asserts that the material should not be available for public disclosure: This material should not be disclosed for at least 25 years. While improvements in design are made relatively frequently, disclosure of the design information would lead to insights into both design and manufacturing techniques that could have an adverse competitive effect for many years to come. As such, it is important that the design not be made available to unauthorized persons who might attempt to use knowledge of the design to compromise the applications for which the equipment will be employed. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Sincerely, Scot Rogers

U.S. Deportment of Transportation Federal Aviation Administration AUG 13 2018 Mr. Andy Leimer Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Dear Mr. Andy Leimer: 800 Independence Ave., S. W. Washington, D. C. 20591 The Federal Aviation Administration, Spectrum Engineering Services Group received the Garmin GMN-02002 (GTN Bravo Series) notification letter of its filing with the Federal Communications Commission (FCC). The application is for certification of the Gannin GMN-02002 (market label GTN 635 Bravo, GTN 650 Bravo, GTN 750 Bravo) with FCC ID: IPH-03309. We have completed the review process of the information submitted by Garmin. We have concluded that we have no objection to the FCC granting certification for this equipment. If you require any additional information, please contact Mr. Ian Atkins, Group Manager, Spectrum Engineering Services Group, at (202) 267-7531 or Mr. Jae Shin, Electronics Engineer, Spectrum Planning and International Team, at (202) 267-7365 or via e-mail jae. w [email protected]. Sincerely, Brian P. Peters Acting Director Operations Support cc: Robert Godsy [email protected]

Rogers Labs, Inc. Garmin International, Inc. SN : 5FR000206 4405 West 259 th Terrace Model: GMN-02002 FCC ID: IPH-03309 Louisburg, KS 66053 Test: 190715 Phone/Fax: (913) 837-3214 Test to: RSS-141, and RSS-Gen Date: December 2, 2019 Revision 1 File: GMN02002 TNB ExtPho Page 1 of 3 Rogers Labs, Inc. Garmin International, Inc. SN : 5FR000206 4405 West 259 th Terrace Model: GMN-02002 FCC ID: IPH-03309 Louisburg, KS 66053 Test: 190715 Phone/Fax: (913) 837-3214 Test to: RSS-141, and RSS-Gen Date: December 2, 2019 Revision 1 File: GMN02002 TNB ExtPho Page 2 of 3 Rogers Labs, Inc. Garmin International, Inc. SN : 5FR000206 4405 West 259 th Terrace Model: GMN-02002 FCC ID: IPH-03309 Louisburg, KS 66053 Test: 190715 Phone/Fax: (913) 837-3214 Test to: RSS-141, and RSS-Gen Date: December 2, 2019 Revision 1 File: GMN02002 TNB ExtPho Page 3 of 3

GMN-02002 Sample Label

VHF Transceiver PCA – Mounted VHF Transceiver PCA – Top with Shields VHF Transceiver PCA – Top without Shields VHF Transceiver PCA – Bottom

Rogers Labs, Inc. Garmin International, Inc. SN : 5FR000206 4405 West 259 th Terrace Model: GMN-02002 FCC ID: IPH-03309 Louisburg, KS 66053 Test: 190715 Phone/Fax: (913) 837-3214 Test to: FCC Parts 2, 15, 87 Date: November 27, 2019 Revision 1 File: GMN02002 TNB RF Exposure Page 1 of 2 10-Watt Version Model: GMN-02002Test Number:190715 MPE CalculatorRF Exposure uses EIRP for calculation. EIRP is based on TX power added to the antenna gain in dBi. dBi = dB gain compared to an isotropic radiator. S = power density in mW/cm^2 Transmitter maximum Output power operating at 100% (Watts)13.3352 Percent Duty Cycle operation (%)0.5Antenna Gain (dBi)2.2 Output Power for 100% duty Cycle operation (Watts)6.6676Antenna Gain (Numeric)1.66 Tx Frequency (MHz)127Calcualtion power (Watts)6.6676dBd + 2.17 = dBidBi to dBd2.2 Antenna Gain (dBd)0.03 Cable Loss (dB)0.0Adjusted Power (dBm)38.24Antenna minus cable (dBi)2.20 Calculated ERP (mw)6,713.826.71EIRP = Po(dBM) + Gain (dB) Calculated EIRP (mw)11,065.4711.07Radiated (EIRP) dBm40.440 ERP = EIRP - 2.17 dB Radiated (ERP) dBm38.270 Occupational Limit 1 mW/cm 2 Frequency (MHz) Occupational Limit (mW/cm 2 )Public Limit (mW/cm 2 ) 10 W/m 2 30-30010.2 General Public Limit300-1,500f/300f/1500 0.2 mW/cm 2 1,500-10,00051 2 W/m 2 Occupational Limit 0.6455ƒ 0.5 W/m 2 9.1 W/m 2 Frequency (MHz) Occupational Limit (W/m 2 )Public Limit (W/m 2 ) General Public Limit100-6,000 0.6455ƒ 0.5 1.291 W/m 2 6,000-15,00050 1.291 W/m 2 48-3001.291 300-6,000 0.02619ƒ 0.6834 6,000-15,0005010 f = Transmit Frequecny (MHz) f (MHz) =127 P T = Power Input to Antenna (mW) P T (mW) = 13,335.2143 Duty cycle (percentage of operation) % =0.5 P A = Adjusted Power due to Duty cycle or Cable Loss (mW) P A (mW) = 6,667.61 G N = Numeric Gain of the Antenna GN (numeric) =1.66 S 20 = Power Density of device at 20cm (W/m 2 ) S 20 =(P A G N )/(4πR 20 ) 2 S 20 (W/m 2 ) = 22.01 S L = Power Density Limit (W/m 2 ) S L (W/m 2 )= 1.291 R C = Minimum distance to the Radiating Element for Compliance (cm) R C =√(P A G N /4πS L )R C (cm) =82.6 S C = Power Density of the device at the Compliance Distance R C (W/m 2 ) S C =(P A G N )/(4πR C ) 2 S C (W/m 2 ) = 1.29 R 20 = 20cm R20=20 For Complaince with Canada General Population Limits, User Manual must indicate a minimum seperation distance of 82.59cm Or in Meters for Complaince with Canada General Population Limits, a minimum seperation distance of 0.83Meters FCC radio frequency radiation exposure limits per 1.1310 IC radio frequency radiation exposure limits per RSS-102 EIRP Power density (S) mW/cm 2 =------- 4 pr^2 r (cm) EIRP (mW) Rogers Labs, Inc. Garmin International, Inc. SN : 5FR000206 4405 West 259 th Terrace Model: GMN-02002 FCC ID: IPH-03309 Louisburg, KS 66053 Test: 190715 Phone/Fax: (913) 837-3214 Test to: FCC Parts 2, 15, 87 Date: November 27, 2019 Revision 1 File: GMN02002 TNB RF Exposure Page 2 of 2 16-Watt Version Model: GMN-02002Test Number:190715 MPE CalculatorRF Exposure uses EIRP for calculation. EIRP is based on TX power added to the antenna gain in dBi. dBi = dB gain compared to an isotropic radiator. S = power density in mW/cm^2 Transmitter maximum Output power operating at 100% (Watts)18.4077 Percent Duty Cycle operation (%)0.5Antenna Gain (dBi)2.2 Output Power for 100% duty Cycle operation (Watts)9.2039Antenna Gain (Numeric)1.66 Tx Frequency (MHz)127Calcualtion power (Watts)9.2039dBd + 2.17 = dBidBi to dBd2.2 Antenna Gain (dBd)0.03 Cable Loss (dB)0.0Adjusted Power (dBm)39.64Antenna minus cable (dBi)2.20 Calculated ERP (mw)9,267.669.27EIRP = Po(dBM) + Gain (dB) Calculated EIRP (mw)15,274.6115.27Radiated (EIRP) dBm41.840 ERP = EIRP - 2.17 dB Radiated (ERP) dBm39.670 Occupational Limit 1 mW/cm 2 Frequency (MHz) Occupational Limit (mW/cm 2 )Public Limit (mW/cm 2 ) 10 W/m 2 30-30010.2 General Public Limit300-1,500f/300f/1500 0.2 mW/cm 2 1,500-10,00051 2 W/m 2 Occupational Limit 0.6455ƒ 0.5 W/m 2 9.1 W/m 2 Frequency (MHz) Occupational Limit (W/m 2 )Public Limit (W/m 2 ) General Public Limit100-6,000 0.6455ƒ 0.5 1.291 W/m 2 6,000-15,00050 1.291 W/m 2 48-3001.291 300-6,000 0.02619ƒ 0.6834 6,000-15,0005010 f = Transmit Frequecny (MHz) f (MHz) =127 P T = Power Input to Antenna (mW) P T (mW) = 18,407.7200 Duty cycle (percentage of operation) % =0.5 P A = Adjusted Power due to Duty cycle or Cable Loss (mW) P A (mW) = 9,203.86 G N = Numeric Gain of the Antenna GN (numeric) =1.66 S 20 = Power Density of device at 20cm (W/m 2 ) S 20 =(P A G N )/(4πR 20 ) 2 S 20 (W/m 2 ) = 30.39 S L = Power Density Limit (W/m 2 ) S L (W/m 2 )= 1.291 R C = Minimum distance to the Radiating Element for Compliance (cm) R C =√(P A G N /4πS L )R C (cm) =97.0 S C = Power Density of the device at the Compliance Distance R C (W/m 2 ) S C =(P A G N )/(4πR C ) 2 S C (W/m 2 ) = 1.29 R 20 = 20cm R20=20 For Complaince with Canada General Population Limits, User Manual must indicate a minimum seperation distance of 97.03cm Or in Meters for Complaince with Canada General Population Limits, a minimum seperation distance of 0.97Meters FCC radio frequency radiation exposure limits per 1.1310 IC radio frequency radiation exposure limits per RSS-102 EIRP Power density (S) mW/cm 2 =------- 4 pr^2 r (cm) EIRP (mW)

Testing NVLAP Lab Code 200087-0 Rogers Labs, Inc. Garmin International, Inc. SN : 5FR000206 4405 West 259 th Terrace Model: GMN-02002 FCC ID: IPH-03309 Louisburg, KS 66053 Test: 190715 Phone/Fax: (913) 837-3214 Test to: FCC Parts 2, 15, 87 Date: December 3, 2019 Revision 1 File: GMN02002 FCC VHF Com TstRpt 190715 r1 Page 1 of 43 Application For Grant of Certification FCC CFR47 Part 87 Model: GMN-02002 118-136.975 MHz Aviation Communications Transceiver FCC ID: IPH-03309 For Garmin International, Inc. 1200 East 151st Street Olathe, KS 66062 FCC Designation: US5305 ISED Registration: 3041A-1 Test Report Number: 190715 Test Date: July 15, 2019 Authorized Signatory: Scot D. Rogers ROGERS LABS, INC. 4405 West 259th Terrace Louisburg, KS 66053 Phone / Fax (913) 837-3214 Testing NVLAP Lab Code 200087-0 Rogers Labs, Inc. Garmin International, Inc. SN : 5FR000206 4405 West 259 th Terrace Model: GMN-02002 FCC ID: IPH-03309 Louisburg, KS 66053 Test: 190715 Phone/Fax: (913) 837-3214 Test to: FCC Parts 2, 15, 87 Date: December 3, 2019 Revision 1 File: GMN02002 FCC VHF Com TstRpt 190715 r1 Page 2 of 43 Engineering Test Report Application for Grant of Certification For Aviation Communications Transceiver Model: GMN-02002 Garmin International, Inc. 1200 East 151st Street Olathe, KS 66062 FCC ID: IPH-03309 Frequency Range: 118-136.975 MHz Test Date: July 15, 2019 Certifying Engineer: Scot D. Rogers Rogers Labs, Inc. 4405 West 259th Terrace Louisburg, KS 66053 Telephone/Facsimile: (913) 837-3214 This report shall not be reproduced except in full, without the written approval of the laboratory. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. ROGERS LABS, INC. 4405 West 259th Terrace Louisburg, KS 66053 Phone / Fax (913) 837-3214 Testing NVLAP Lab Code 200087-0 Rogers Labs, Inc. Garmin International, Inc. SN : 5FR000206 4405 West 259 th Terrace Model: GMN-02002 FCC ID: IPH-03309 Louisburg, KS 66053 Test: 190715 Phone/Fax: (913) 837-3214 Test to: FCC Parts 2, 15, 87 Date: December 3, 2019 Revision 1 File: GMN02002 FCC VHF Com TstRpt 190715 r1 Page 3 of 43 Tabl e of Cont ents Table of Contents TABLE OF CONTENTS .................................................................................................. 3 REVISION HISTORY ...................................................................................................... 4 FORWARD ..................................................................................................................... 5 OPINION / INTERPRETATION OF RESULTS ............................................................... 5 APPLICABLE STANDARDS & TEST PROCEDURES .................................................. 5 APPLICATION FOR CERTIFICATION ........................................................................... 6 SYSTEM DESCRIPTION ................................................................................................ 9 Equipment Configuration .................................................................................................................................... 10 UNITS OF MEASUREMENTS ...................................................................................... 11 TEST SITE LOCATIONS .............................................................................................. 11 ENVIRONMENTAL CONDITIONS................................................................................ 11 LIST OF TEST EQUIPMENT ........................................................................................ 12 TRANSMITTER POWER OUTPUT .............................................................................. 13 Measurements Required ...................................................................................................................................... 13 Test Arrangement ................................................................................................................................................. 13 Table 1 Transmitter Power Results ..................................................................................................................... 14 Figure 1 Power Output Across Frequency Band 118-136.750 MHz (25 kHz mode, 10 Watt) .......................... 15 Figure 2 Power Output Across Frequency Band 118-136.750 MHz (25 kHz mode, 16 Watt) .......................... 16 Figure 3 Power Output 136.992 MHz (8.33 kHz mode) .................................................................................... 17 MODULATION CHARACTERISTICS ........................................................................... 18 Measurements Required ...................................................................................................................................... 18 Test Arrangement ................................................................................................................................................. 18 Modulation Characteristic Results ...................................................................................................................... 19 Figure 4 Modulation Characteristics .................................................................................................................. 19 Figure 5 Audio Frequency Response / Modulation Characteristics ................................................................... 20 OCCUPIED BANDWIDTH ............................................................................................ 21 Measurements Required ...................................................................................................................................... 21 Test Arrangement ................................................................................................................................................. 21 Table 2 Occupied Bandwidth Results ...............................................................................…

Text truncated - open the document above for the full version.

Rogers Labs, Inc. Garmin International, Inc. SN : 5FR000206 4405 West 259 th Terrace Model: GMN-02002 FCC ID: IPH-03309 Louisburg, KS 66053 Test: 190715 Phone/Fax: (913) 837-3214 Test to: RSS-141, and RSS-Gen Date: November 27, 2019 Revision 1 Fil…

Text truncated - open the document above for the full version.