IPH-04746Portable Transceiver

R ev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: July 29, 2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: IPH-04746 FRN: 0005088588 Garmin International, Inc., (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Ben Karsak

Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: July 29, 2024 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: IPH-04746 Garmin International, Inc., Garmin certifies that, as of the date of t he filing of the application, Garmin International, Inc.. is our designated U.S. agent for service of process for the above referenced FCC ID. Garmin International, Inc., accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or t he conclusion of any Commission-related proceeding involving the equipment. Garmin International, Inc. accepts, as of the date of t he filing of the application, the obligation of the designated U.S. agent for service of process for t he above referenced FCC ID. Designated U.S. Agent Information: FRN: 0005088588 Name: Garmin International, Inc. Address: 1200 East 151 st Street, Olathe, Kansas, 66062 Contact Person: Ben Karsak Tel.: 913-397-1946 Email: [email protected] Sincerely, Garmin International, Inc. Ben Karsak

Re v 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 28, 2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: IPH-04746 FRN: 0005088588 Garmin International, Inc., (“the applicant”) certifies that, as of t he date of t he filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of i ts subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Ben Karsak

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: July 29, 2024 SUBJECT: FCC Application for FCC ID: IPH-04746 To Whom It May Concern: Garmin International, Inc. will continue to apply processes and procedures to ensure compliance with 47 CFR 2 requirements regarding products produced under Supplier’s Declaration of Conformity procedure for class B computer peripheral portion as applicable to this composite filing. Sincerely, Ben Karsak Manager Compliance Engineering Garmin International, Inc.

Page 1 of 1 Request for Confidentiality Date: August 22, 2024 Subject: Confidentiality Request for: FCC ID: IPH-04746 IC: 1792A-04746 Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit ☐ Short Term ☒ Permanent ☐ Not Provided Block Diagrams ☒ Short Term ☐ Not Provided External Photos ☒ Short Term ☐ Permanent ☐ Not Provided Internal Photos ☐ Short Term ☒ Permanent ☐ Not Provided Operation Description/Theory of Operation ☐ Short Term ☒ Permanent ☐ Not Provided Parts List & Placement/BOM ☐ Short Term ☒ Permanent ☐ Not Provided Tune-Up Procedure ☐ Short Term ☒ Permanent ☐ Not Provided Schematics ☒ Short Term ☐ Not Provided Test Setup Photos ☒ Short Term ☐ Permanent ☐ Not Provided User’s Manual The above-mentioned company has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality (if applicable): The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify Timco in the event information regarding the product or the product is made available to the public before the requested period has expired. Timco will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04- 1705. Sincerely, By: __________________________ Fox Lane, EMC Test Engineer, NCEE Labs

July 24, 2024 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Innovation, Science and Economic Development Canada Certification and Engineering Bureau 3701 Carling Avenue PO Box 11490, Station H Ottawa, Ontario, Canada K2H 8S2 To Whom It May Concern: Pursuant to 47 CFR 2.911, Garmin International, Inc. (Garmin) has authorized the following Garmin International Associates to act on Garmin's behalf for the sole and express purpose of processing applications to the Federal Communication Commission (FCC) and Innovation, Science and Economic Development Canada (ISED) for equipment authorization or certification. Mr. William Pertner, Compliance Engineering Team Lead Mr. Jay Everett, Compliance Engineering Team Lead Mr. Richard Kockelkoren, Compliance Engineer Mr. Mike Moranha, Compliance Engineer Ms. Poojita Bhattu, Compliance Engineer Mr. Jeffrey Hailey, Compliance Engineer Mr. Dan Irish, Compliance Engineer Mr. Kiran Kumar, Compliance Engineer Mr. Tim Olson, Compliance Engineer Mr. Jonathan Shafer, Design Certification Engineer Ms. Sara Jones, Design Certification Engineer Mr. Jacky Yeung, Compliance Engineer Mr. Niklas Haydon, Compliance Engineering Team Lead Mr. Mitchell Phillipi, Compliance Engineering Team Lead As such, the Garmin Associates listed above are authorized to: 1) sign Form 731, 2) sign letters of application, 3) request confidentiality, and 4) exchange data and information with the FCC, IC and/or authorized TCBs on behalf of Garmin. In addition, these individuals shall be considered "authorized individuals" to act on Garmin's behalf where an "authorized individual's" attestation is necessary or preferred. This authorization remains in effect until notified to the contrary by Garmin. Sincerely, Ben Karsak Manager Compliance Engineering Garmin International, Inc.

August 5, 2024 Federal Communications Commission Equip Approval Services Post Office Box 358315 Pittsburgh, Pennsylvania 15215-5315 To Whom It May Concern: Pursuant to 47 CFR 2.911, Garmin International, Inc. (Garmin) has authorized Fox Lane of the Nebraska Center for Excellence in Electronics to act on Garmin’s behalf for the sole and express purpose of processing applications to the Federal Communication Commission (FCC) for equipment FCC authorization. This authorization is limited to FCC ID: IPH-04746. Consistent with the foregoing, Fox Lane is authorized to: 1) Sign Form 731, 2) Sign letters of application, 3) Request confidentiality, and 4) Exchange data and information with the FCC, and authorized TCBs on behalf of Garmin. This authorization is not assignable to other beyond Fox Lane. No party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C 862. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. This authorization expires August 5, 2025. Sincerely, Dan Irish Lead Compliance Engineer -----------------------------------------------------nothing follows----------------------------------------------------

E-Label Information A. The following specific instructions are provided in the printed Start Manual that is provided with the device. Go to garmin.com/manuals B. The following specific instructions are provided in the owner’s manual that is provided at www.garmin.com/manuals: C. The above information is programmed by Garmin in such a manner that third parties cannot modify it. a. “No special accessories or supplemental plug-ins (e.g., installation of a SIM/USIM card) are required to access the information. Access to the information is provided without special codes, accessories, or permissions beyond the normal security protection to unlock the screen, sign-in page, or overall product access.” b. Electronically displayed information is clearly legible without the aid of magnification. D. The above M/N, FCC ID, and ISED certification numbers can be found printed on the product packaging. E. The PMN/HVIN and ISED certification number are electronically labelled as shown above. M/N: A04746 FCC ID: IPH-04746 IC: 1792A-04746 CONTAINS: M/N: A04349 CONTAINS: FCC ID: IPH-04349 CONTAINS: IC: 1792A-04349 This device complies

© 2024 RF Exposure Lab, LLC This report shall not be reproduced except in full without the written approval of RF Exposure Lab, LLC. 802 N. Twin Oaks Valley Road, Suite 105 • San Marcos, CA 92069 • U.S.A. TEL (760) 471-2100 • FAX (760) 471-2121 http://www.rfexposurelab.com CERTIFICATE OF COMPLIANCE SAR EVALUATION Garmin International, Inc. Dates of Test: June 5-6, 2024 1200 E. 151 st Street Test Report Number: SAR.20240 603 Olathe, KS 66062 Revision A Lab Designation Number: US1195 This wireless mobile and/or portable device has been shown to be compliant for localized specific absorption rate (SAR) for uncontrolled environment/general exposure limits specified in ANSI C95.1 – 1999 Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz, ANSI C95.3 – 2002 Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields, IEEE Std.1528 – 2013 Recommended Practice and had been tested in accordance with the measurement procedures specified in KDB 447498 (See test report). I attest to the accuracy of the data. All measurements were performed by myself or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. RF Exposure Lab, LLC certifies that no party to this application is subject to a denial of Federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Jay M. Moulton Vice President Testing Cert. # 2387.01 FCC ID: IPH-04746 Contains FCC ID: IPH-04349 Model(s): A04746 Test Sample: Engineering Unit Same as Production Serial No.: 16977296 Equipment Type: Digital Transmission System Transceiver Classification: Portable Transmitter Next to Body TX Frequency Range: 1616 – 1626 MHz; 2400 – 2480 MHz Frequency Tolerance: ± 2.5 ppm Maximum RF Output: 1640 MHz – 35.7 dBm, 2450 MHz (BT) – 6.0 dBm, 2450 MHz (ANT) – 4.0 dBm Conducted Signal Modulation: DE-QPSK, QPSK, GFSK, GMSK Antenna Type: Internal Antenna Application Type: Certification FCC Rule Parts: Part 2, 15C, 25 KDB Test Methodology: KDB 447498 D01 v06, KDB 865664 D01 v01r04, KDB 865664 D02 v01r02 Max. Stand Alone SAR Value: 1.35 W/kg Reported Max. Simultaneous SAR Value: 1.45 W/kg Reported Separation Distance: 0 mm Report Number: SAR.20240603 © 2024 RF Exposure Lab, LLC Page 2 of 76 This report shall not be reproduced except in full without the written approval of RF Exposure Lab, LLC. Table of Contents 1. Introduction ........................................................................................................................ 4 SAR Definition [5] ................................................................................................................... 5 2. SAR Measurement Setup ................................................................................................... 6 Robotic System ...................................................................................................................... 6 System Hardware ................................................................................................................... 6 System Electronics ................................................................................................................. 7 Probe Measurement System .................................................................................................. 7 3. Probe and Dipole Calibration .............................................................................................15 4. Phantom & Simulating Tissue Specifications .....................................................................16 Head Simulating Mixture Characterization.............................................................................16 5. ANSI/IEEE C95.1 – 1999 RF Exposure Limits [2] ..............................................................17 Uncontrolled Environment .....................................................................................................17 Controlled Environment .........................................................................................................17 6. Measurement Uncertainty .................................................................................................18 7. System Verification ............................................................................................................19 Tissue Verification .................................................................................................................19 Test System Verification ........................................................................................................19 8. SAR Test Data Summary ..................................................................................................20 Procedures Used To Establish Test Signal ...........................................................................20 Device Test Condition ...........................................................................................................20 SAR Data Summary – 1640 MHz Body .................................................................................23 SAR Data Summary – 2450 MHz Body .................................................................................24 SAR Data Summary – Simultaneous Evaluation ..................... Error! Bookmark not defined. 9. Test Equipment List ...........................................................................................................26 10. Conclusion ....................................................................................................................27 11. References ....................................................................................................................28 Appendix A – System Validation Plots and Data ...........................................…

Text truncated - open the document above for the full version.

The Nebraska Center for Excellence in Electronics (NCEE) authorizes the above named company to reproduce this report provided it is reproduced in its entirety for use by the company’s employees only. Any use that a third party makes of this report, or any reliance on or decisions made based on it, are the responsibility of such third parties. NCEE accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. This report applies only to the items tested. FCC/ISED Test Report Prepared for: Garmin International, Inc. Address: 1200 E. 151 st Street Olathe, Kansas, 66062, USA Product: A04746 Test Report No: R20240321-00-E1 Rev: B Approved by: __________________ Fox Lane, EMC Test Engineer DATE: July 29, 2024 Total Pages: 48 A Report Number: R20240321-00-E1 Rev B Prepared for: Garmin International, Inc. The Nebraska Center for Excellence in Electronics 4740 Discovery Drive Lincoln, NE 68521 Page 2 of 48 REVISION PAG E Rev. No. Date Description 0 31 May 2024 Issued by FLane Reviewed by KVepuri Prepared by FLane A 25 July 2024 Updated Duty Cycle values Added intermodulation statements to Section 4.4 - FL B 29 July 2024 Corrected power DCCF - FL A Report Number: R20240321-00-E1 Rev B Prepared for: Garmin International, Inc. The Nebraska Center for Excellence in Electronics 4740 Discovery Drive Lincoln, NE 68521 Page 3 of 48 CONT ENT S Revision Page ............................................................................................................................................................................... 2 1.0 Summary of test results ....................................................................................................................................... 4 2.0 EUT Description .................................................................................................................................................... 5 2.1 Equipment under test ........................................................................................................................................ 5 2.2 Description of test modes ................................................................................................................................ 5 2.3 Description of support units ............................................................................................................................ 5 3.0 Laboratory and General Test Description ........................................................................................................ 6 3.1 Laboratory description ...................................................................................................................................... 6 3.2 Test personnel ..................................................................................................................................................... 6 3.3 Test equipment.................................................................................................................................................... 7 3.4 General Test Procedure and Setup for Radio Measuremnts ................................................................... 8 4.0 Results .................................................................................................................................................................. 10 4.1 Output Power ..................................................................................................................................................... 12 4.2 Bandwidth ........................................................................................................................................................... 13 4.3 Duty Cycle .......................................................................................................................................................... 14 4.4 Radiated emissions .......................................................................................................................................... 16 4.5 Conducted Spurious Emissions ................................................................................................................... 20 4.6 Band edges ........................................................................................................................................................ 24 4.7 Power Spectral Density ................................................................................................................................... 26 4.8 Conducted AC Mains Emissions .................................................................................................................. 27 Appendix A: Sample Calculation ........................................................................................................................................... 30 Appendix B – Measurement Uncertainty ...................................................................................................................... 31 Appendix C – Graphs and Tables .................................................................................................................................. 32 REPORT END ..................................................................................................................................................................... 48 A Report Number: R20240321-00-E1 Rev B Prepared for: Garmin International, Inc. The Nebraska Center for Excellence in Electronics 4740 Discovery Drive Lincoln, NE 68521 Page 4 of 48 1.0 SU MMAR Y OF TEST R ESULT S The worst-case measurements were reported in this report. Summary of test results presented in this report correspond to the following section: The EUT has been tested according to the following specifications: (1) US Code of Federal Regulations, Title 47, Part 15 (2) ISED RSS-Gen, Issue 5 (3) ISED RSS-247, Issue 3 APPLIED STANDARDS AND REGULATIONS Standard Section Test Type Result FCC Pa…

Text truncated - open the document above for the full version.

Description: 35354 Iridium Patch Antenna PART NUMBER: ANT3535B002T1621S In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. For more information: Pulse Worldwide HeadquartersPulse/Larsen AntennasEurope HeadquartersPulse (Suzhou) Wireless Products Co, Inc. 15255 Innovation Drive #100Pulse GmbH & Do, KG99 Huo Ju Road(#29 Bldg,4 th Phase San Diego, CA 92128Vancouver, WA 98683Zeppelinstrasse 15Suzhou New District USAUSAHerrenberg, Germany Jiangsu Province, Suzhou 215009 PR China Tel:1-858-674-8100Tel: 1-360-944-7551 - Tel: 49 7032 7806 0 Tel: 86 512 6807 9998 18110 SE 34 th St Bldg 2 Suite 250 Features: Applications: All dimensions are in mm / inches • Size : 35x35x4 • High radiation efficiency • Iridium band • Pin-solder process • RoHS compliant • Iridium system • Navigation device • Telematics box • Fleet management 1 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. PART NUMBER: ANT3535B002T1621S Description: 35354 Iridium Patch Antenna 2 ELECTRICAL SPECIFICATIONS Working Frequency1616 MHz ~ 1626.5 MHz Center Frequency 1621 ±3 MHz Gain (@ Zenith) 4.7 dBic (Typ.) Bandwidth (@ -10dB R.L.) 50 MHz(Min.) VSWR1.5 Max. PolarizationRHCP Axial Ratio ≦ 5 dB Impedance50 Ω Operating Temperature-40 ~ 85 °C NOTE 1. Based on customer’s PCB board and housing. 2. Centre frequency will be offset to working frequency while changes of customer's housing and ground plane. In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. PART NUMBER: ANT3535B002T1621S Description: 35354 Iridium Patch Antenna 3 MECHANICAL DRAWING In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. PART NUMBER: ANT3535B002T1621S Description: 35354 Iridium Patch Antenna 4 FOOTPRINT Bottom View Top View In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. PART NUMBER: ANT3535B002T1621S Description: 35354 Iridium Patch Antenna 5 RETURN LOSS -40 -30 -20 -10 0 10 20 30 40 -10 0 1 of 1 (Max) Pwr0 dBm Ch1Center1.621 GHzSpan200 MHz Trc1 Trc2 S11 S11 dB Mag Smith 10 dB /Ref -10 dB Ref 1 U Cal int Cal int S11 M 11.616000 GHz-21.652 dB M 21.621000 GHz-23.549 dB M 31.626500 GHz-22.631 dB M 11.616000 GHz 44.356 Ω -j5.4041 Ω 18.224 pF M 21.621000 GHz 44.885 Ω -j3.6969 Ω 26.558 pF M 31.626500 GHz 44.453 Ω -j4.2437 Ω 23.058 pF M 1 M 2 M 3 M 1 M 2 M 3 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. PART NUMBER: ANT3535B002T1621S Description: 35354 Iridium Patch Antenna 6 RADIATION PATTERN 1621 MHz 2D x-z plane pattern 2D y-z plane pattern 3D radiation pattern Cut2 Power (dBm) Angle (? Scale: 6/div Min: -36 Max: 6 0 180 30 210 60 240 90270 120 300 150 330 Power (dBm) Angle (? Scale: 6/div Min: -36 Max: 6 0 180 30 210 60 240 90270 120 300 150 330 Power (dBm) -36 6 -24 -12 Z Y X Azimuth = 104.4 Elevation = -37.6 Roll = -68.5 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information o…

Text truncated - open the document above for the full version.

5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728｜Fax: 886-3-4072738 ｜[email protected] 1 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com Product Name: EZ070 Ceramic Patch Antenna Part Number: H2P1372GAA0100 Features: ⚫Supporting: Iridium ⚫Dimensions: 36 x 36 x 4mm ⚫Stable and reliable in performances ⚫Low temperature coefficient of frequency ⚫RoHS 2.0 compliance 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728｜Fax: 886-3-4072738 ｜[email protected] 2 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com Ceramic Patch Antenna MODEL: EZ070 Version: A I.Specifications: Items Specifications Center Frequency (MHz) 1616~1626 Return Loss (dB) <-10 Efficiency (%) ~85 Average Gain (dB) ~-0.7 Peak Gain(dBi) ~5.2 Impedance(Ω) 50 Polarization RHCP Mechanical Specifications Dimensions (mm) 36(L) x 36(W) x 4(H) Material Ceramic Environmental Conditions Operation & Storage Temperature ( o C) -40 ~ +85 Storage Temperature ( o C) (Antenna with packing sealed) -5 ~ +40 Relative Humidity 10 ~ 70 % *After the product is unpacked (not used for more than a week), it needs to be sealed package to prevent the silver surface of the product from being oxidized and discolored. *The oxidation and discoloration of the silver surface of the product will not affect the functional electrical properties. 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728｜Fax: 886-3-4072738 ｜[email protected] 3 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com II.Antenna Dimensions (unit: mm): 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728｜Fax: 886-3-4072738 ｜[email protected] 4 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com III.Properties: a)Return loss (dB) b)Efficiency (%) 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728｜Fax: 886-3-4072738 ｜[email protected] 5 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com c)Average Gain (dB) d)Peak Gain(dBi) 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728｜Fax: 886-3-4072738 ｜[email protected] 6 © Unictron Technologies Corp . All specifications subject to change without notice. ww…

Text truncated - open the document above for the full version.