IPH-04805Portable Transceiver

Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 04-15-2024 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: IPH-04805 Garmin International, Inc., Garmin certifies that, as of the date of the filing of the application, Garmin International, Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. Garmin International, Inc., accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Garmin International, Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: FRN: 0005088588 Name: Garmin International, Inc. Address: 1200 East 151 st Street, Olathe, Kansas, 66062 Contact Person: Ben Karsak Tel.: 913-440-1946 Email: [email protected] Sincerely, Garmin International, Inc. Ben Karsak

Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 3, 2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: IPH-04805 FRN: 0005088588 Garmin International, Inc., (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Ben Karsak Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 3, 2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: IPH-04805 FRN: 0005088588 Garmin International, Inc., (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Ben Karsak

REQUEST FOR CONFIDENTIALITY Date: 15 Apr 2024 Applicant: Garmin InternaƟonal Subject: ConfidenƟality Request for FCC ID: IPH-04805 IC: 1792A-04805 Pursuant to FCC 47 CFR 0.457(d) and 0.459, and IC RSP-100 SecƟon 12.4, we request that a part of the FCC and ISED applicaƟon be held confidenƟal. Type Of ConfidenƟality Requested Exhibit ☐ Short Term ☒ Permanent ☐ Not Provided Block Diagrams ☐ Short Term ☒ Permanent ☐ Not Provided SchemaƟcs ☐ Short Term ☒ Permanent ☐ Not Provided OperaƟonal DescripƟon/ Theory of OperaƟon ☐ Short Term ☐ Permanent ☒ Not Provided Parts List & Placement/BOM ☐ Short Term ☐ Permanent ☒ Not Provided Tune-Up Procedure ☒ Short Term ☐ Permanent ☐ Not Provided Test Setup Photos ☒ Short Term ☐ Permanent ☐ Not Provided User’s Manual(s) ☒ Short Term ☐ Permanent ☐ Not Provided External Photos ☒ Short Term ☐ Permanent ☐ Not Provided Internal Photos Garmin InternaƟonal has spent a substanƟal effort in developing this product and it is one of the first of its kind in the industry. Having the subject informaƟon easily available to "compeƟƟon" would negate the advantage we have achieved by developing this product. Not protecƟng the details of the design will result in financial hardship. Permanent ConfidenƟality: Garmin requests the exhibits listed above as permanently confidenƟal be permanently withheld from public review due to materials that contain trade secrets and proprietary informaƟon not customarily released to the public. Short-Term ConfidenƟality (if applicable): The applicant requests the exhibits selected above as short term confidenƟal be withheld from public view for a period of 180 days from the date of the Grant of Equipment AuthorizaƟon and prior to markeƟng. This is to avoid premature release of sensiƟve informaƟon prior to markeƟng or release of the product to the public. Sincerely, Kiran Kumar Compliance Engineer Garmin InternaƟonal Inc.

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 3, 2024 SUBJECT: FCC Application for FCC ID: IPH-04805 To Whom It May Concern: Garmin International, Inc. will continue to apply processes and procedures to ensure compliance with 47 CFR 2 requirements regarding products produced under Supplier’s Declaration of Conformity procedure for class B computer peripheral portion as applicable to this composite filing. Sincerely, Ben Karsak Manager Compliance Engineering Garmin International, Inc.

May 10, 2024 Federal Communications Commission Equip Approval Services Post Office Box 358315 Pittsburgh, Pennsylvania 15215-5315 To Whom It May Concern: Pursuant to 47 CFR 2.911, Garmin International, Inc. (Garmin) has authorized Ben Hewson or Art Voss at Celltech Labs to act on Garmin’s behalf for the sole and express purpose of processing applications to the Federal Communication Commission (FCC) for equipment FCC authorization. This authorization is limited to FCC ID: IPH-04805. Consistent with the foregoing, Ben Hewson or Art Voss are authorized to: 1) Sign Form 731, 2) Sign letters of application, 3) Request confidentiality, and 4) Exchange data and information with the FCC, and authorized TCBs on behalf of Garmin. This authorization is not assignable to others beyond Ben Hewson or Art Voss. No party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C 862. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. This authorization expires May 10, 2025 Sincerely, Kiran Kumar Compliance Engineer nothing follows

March 28, 2024 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Innovation, Science and Economic Development Canada Certification and Engineering Bureau 3701 Carling Avenue PO Box 11490, Station H Ottawa, Ontario, Canada K2H 8S2 To Whom It May Concern: Pursuant to 47 CFR 2.911, Garmin International, Inc. (Garmin) has authorized the following Garmin International Associates to act on Garmin's behalf for the sole and express purpose of processing applications to the Federal Communication Commission (FCC) and Innovation, Science and Economic Development Canada (ISED) for equipment authorization or certification. Mr. William Pertner, Compliance Engineering Team Lead Mr. Jay Everett, Compliance Engineering Team Lead Mr. Richard Kockelkoren, Compliance Engineer Mr. Mike Moranha, Compliance Engineer Ms. Poojita Bhattu, Compliance Engineer Mr. Jeffrey Hailey, Compliance Engineer Mr. Dan Irish, Compliance Engineer Mr. Kiran Kumar, Compliance Engineer Mr. Tim Olson, Compliance Engineer Mr. David Utt, Staff Compliance Engineer Mr. Jonathan Shafer, Design Certification Engineer Ms. Sara Jones, Design Certification Engineer Mr. Jacky Yeung, Compliance Engineer As such, the Garmin Associates listed above are authorized to: 1) sign Form 731, 2) sign letters of application, 3) request confidentiality, and 4) exchange data and information with the FCC, IC and/or authorized TCBs on behalf of Garmin. In addition, these individuals shall be considered "authorized individuals" to act on Garmin's behalf where an "authorized individual's" attestation is necessary or preferred. This authorization remains in effect until notified to the contrary by Garmin. Sincerely, Ben Karsak Manager Compliance Engineering Garmin International, Inc.

Label and E-Label Description 1. The following specific instructions are provided in the user’s manual that is provided with the device: a) Label viewing directions are found in the user manual, which is available at www.garmin.com b) To get the owner’s manual, go www.garmin.com/manuals 2. The following specific instructions are provided in the owner’s manual that is provided at www.garmin.com/manuals: display the following information. (see next page) 3. The above information is programmed by Garmin in such a manner that third-parties cannot modify it. a) “No special accessories or supplemental plug-ins (e.g., installation of a SIM/USIM card) are required to access the information. Access to the information is provided without special codes, accessories, or permissions beyond the normal security protection to unlock the screen, sign-in page, or overall product access.” 4. The above M/N, FCC ID, and IC numbers can be found printed on the product packaging.

Test Report S/N: 45461926 R1.0 Test Report Issue Date: 24 May 2024 ©2024 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc. Page 43 of 45 APPENDIX D – PROBE CALIBRATION Test Report S/N: 45461926 R1.0 Test Report Issue Date: 24 May 2024 ©2024 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc. Page 44 of 45 APPENDIX E – DIPOLE CALIBRATION NCL CALIBRATION LABORATORIES Calibration File No: DC-1904 Project Number: 5921 Client.: Celltech Address: 21 – 364 Lougheed Road, Kelowna, BC V1X 7R8, Canada C E R T I F I C A T E OF C A L I B R A T I O N It is certified that the equipment identified below has been calibrated in the NCL CALIBRATION LABORATORIES by qualified personnel following recognized procedures and using transfer standards traceable to NRC/NIST. Validation Dipole (Head) Manufacturer: SPEAG Part number: D2450V2 Frequency: 2450 MHz Serial No: 825 Calibrated: 27/04/2021 Released on: 05/05/2021 This Calibration Certificate is incomplete unless accompanied by the Calibration Results Summary NCL Calibration Laboratories Division of APREL Laboratories DC-1904 Dipole SN: 825 Page 2 of 7 This page has been reviewed for content and attested to on Page 2 of this document. Conditions Dipole SN 825 was a re-calibration. Ambient Temperature of the Laboratory: 21 C +/- 0.5C Temperature of the Tissue: 21 C +/- 0.5C Primary Measurement Standards Instrument Serial Number Cal due date Signal Generator HP 83640B 3844A00689 Sept. 17, 2022 Network Analyzer Keysight E5063A MY54502902 Mar. 9, 2023 Spectrum Analyzer Keysight N9030B MY57140772 Apr. 20, 2023 Attestation The below named signatories have conducted the calibration and review of the data which is presented in this calibration report. NCL Calibration Laboratories Division of APREL Laboratories DC-1904 Dipole SN: 825 Page 3 of 7 This page has been reviewed for content and attested to on Page 2 of this document. Calibration Results Summary The following results relate the Calibrated Dipole and should be used as a quick reference for the user. Tissue Validation Tissue Frequency Dielectric constant,  r Conductivity,  [S/m] Head 2450 MHz 40.73 1.86 Electrical Specification Tissue Frequency Return LossImpedanceSWR: Head 2450 MHz -19.83 dB 43.26  1.23U System Validation Results Tissue Frequency 1-Gram SAR 10-Gram SAR Uncertainty Head 2450 MHz 52.719 W/kg 24.015 W/kg 19.8% Head NCL Calibration Laboratories Division of APREL Laboratories DC-1904 Dipole SN: 825 Page 4 of 7 This page has been reviewed for content and attested to on Page 2 of this document. Introduction This Calibration Report has been produced in line with the SSI Dipole Calibration Procedure SSI-TP-018-ALSAS. The results contained within this report are for Validation Dipole SN 825. The calibration routine consisted of a three-step process. Step 1 was a mechanical verification of the dipole to ensure that it meets the mechanical specifications. Step 2 was an Electrical Calibration for the Validation Dipole, where the SWR, Impedance, and the Return loss were assessed. Step 3 involved a System Validation using the ALSAS-10U, along with APREL E-020 30 MHz to 6 GHz E-Field Probe Serial Number 225. References o IEEE Standard 1528:2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques o EN 62209-1:2016 Human Exposure to RF Fields from hand-held and body-mounted wireless communication devices - Human models. instrumentation, and procedures - Part 1: Procedure to measure the Specific Absorption Rate (SAR) for hand-held mobile wireless devices o IEC 62209-2:2019 Human exposure to RF fields from hand-held and body-mounted wireless devices - Human models, instrumentation, and procedures - Part 2: specific absorption rate (SAR) for wireless communication devices (30 MHz - 6 GHz) o D22-012-Tissue dielectric tissue calibration procedure o D28-002-Dipole procedure for validation of SAR system using a dipole o IEEE 1309 Standard for Calibration of Electromagnetic Field Sensors and Probes, Excluding Antennas, from 9 kHz to 40 GHz Conditions Ambient Temperature of the Laboratory: 21 C +/- 0.5C Temperature of the Tissue: 21 C +/- 0.5C Dipole Calibration uncertainty The calibration uncertainty for the dipole is made up of various parameters presented below. Tolerance, % Mechanical 2.00 Positioning Error 0.10 Electrical 0.37 Tissue Permittivity 3.88 Tissue Conductivity 3.56 Dipole Validation 1.70 Combined Uncertainty, k=2 4.81 NCL Calibration Laboratories Division of APREL Laboratories DC-1904 Dipole SN: 825 Page 5 of 7 This page has been reviewed for content and attested to on Page 2 of this document. The Following Graphs are the results as displayed on the Vector Network Analyzer. Electrical Calibration Test Head S11 R/L -19.83 dB Impedance 43.26  SWR 1.23 U S11 Parameter Return Loss Head Frequency Range 2326.59 MHz to 2450 MHz NCL Calibration Laboratories Division of APREL Laboratories DC-1904 Dipole SN: 825 Page 6 of 7 This page has been reviewed for content and attested to on Page 2 of this document. Smith Chart Dipole Impedance Head NCL Calibration Laboratories Division of APREL Laboratories DC-1904 Dipole SN: 825 Page 7 of 7 This page has been reviewed for content and attested to on Page 2 of this document. SWR Head Test Report S/N: 45461926 R1.0 Test Report Issue Date: 24 May 2024 ©2024 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc. Page 45 of 45 APPENDIX F - PHANTOM Schmid & Partner Engineering AG spea q Zeughausstrasse 43, 8004 Zurich, Switzerland Phone +41 44245 9700, Fax +41 442455779 inf o@speag. com, http://www. speag.com Certificate of conformity / First Article Inspection Tests The sub-units of …

Text truncated - open the document above for the full version.

0.16 <0.1 1.60 1200 East 151 St. 0.15 Olathe, KS, 66062 <0.1 4.00 DTS - 2.4GHz WLAN: 10g Extremity (W/kg) 1g Head (W/kg) 45461926 R2.0 5 June 2024 Applicant: Garmin International Inc. Test Report Serial Number: Test Report Date: SAR Test Report - New Application 1655 Project Number: Maximum reported SAR DSS/DTS Bluetooth: General Pop. Limit: Maximum reported SAR DTS - 2.4GHz WLAN: Ben Hewson, President Celltech Labs Inc. IC Registration 3874A 21-364 Lougheed Rd. Kelowna, BC, V1X 7R8 © 2024 Celltech Labs Inc, This report shall not be reproduced in any form without the expressed written consent of Celltech Labs Inc. DSS/DTS Bluetooth: Product Model Number / HVINProduct Name / PMN Canada Test Lab Certificate: 2470.01 Approved By: IPH-04805 FCC Registration: CA3874 FCC 47 CFR §2.1093 Radiofrequency Radiation Exposure Evaluation: Portable Devices USA IC Registration NumberFCC ID: A04805 In Accordance With: A04805 General Pop. Limit: Test Report S/N: 45461926 R2.0 Test Report Issue Date: 5 June 2024 ©2024 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc. Page 2 of 45 Table of Contents 1.0 DOCUMENT CONTROL ................................................................................................................................................... 4 2.0 CLIENT AND DEVICE INFORMATION ............................................................................................................................ 5 3.0 SCOPE OF EVALUATION ................................................................................................................................................ 6 4.0 NORMATIVE REFERENCES ........................................................................................................................................... 7 5.0 STATEMENT OF COMPLIANCE ..................................................................................................................................... 8 6.0 SAR MEASUREMENT SYSTEM ...................................................................................................................................... 9 7.0 RF CONDUCTED POWER MEASUREMENT ................................................................................................................ 10 TABLE 7.0 CONDUCTED POWER MEASUREMENTS – 2.4GHZ WIFI BT BLE ANT ................................................................................................. 10 8.0 MEASUREMENT METHOD ............................................................................................................................................ 11 TABLE 8.1 NUMBER OF TEST CHANNELS AND SAR TEST REDUCTION .................................................................................................................. 11 TABLE 8.2 EXEMPTIONS FOR SINGLE RF SOURCE ............................................................................................................................................ 12 9.0 ACCESSORIES EVALUATED ........................................................................................................................................ 13 TABLE 9.0 ACCESSORIES EVALUATED ........................................................................................................................................................... 13 10.0 SAR MEASUREMENT SUMMARY .............................................................................................................................. 14 TABLE 10.0: MEASURED RESULTS -EXTREMITY 10G ....................................................................................................................................... 14 TABLE 10.1: MEASURED RESULTS -HEAD – HELD-TO FACE 1G ......................................................................................................................... 14 11.0 SCALING OF MAXIMUM MEASURE SAR ................................................................................................................... 15 TABLE 11.0 SAR SCALING – EXTREMITY 10G ................................................................................................................................................ 15 TABLE 11.1 SAR SCALING – HEAD – HELD TO FACE 1G .................................................................................................................................. 16 12.0 SAR EXPOSURE LIMITS ............................................................................................................................................. 18 TABLE 12.0 EXPOSURE LIMITS .................................................................................................................................................................... 18 13.0 DETAILS OF SAR EVALUATION ................................................................................................................................. 19 13.0 DAY LOG ........................................................................................................................................................................................ 19 13.1 DUT SETUP AND CONFIGURATION ....................................................................................................................................................... 20 13.2 DUT POSITIONING ........................................................................................................................................................................... 20 13.3 GENERAL PROCEDURES AND REPORT .................................................................................................................................................... 21 13.4 FLUID DIELECTRIC AND SYSTEMS PERFORMANCE CHECK ........................................................................................................................... 22 13.5 SCAN RESOLUTION 100MHZ TO 2GHZ .......................................................…

Text truncated - open the document above for the full version.

MeasuredAntenna Cable FrequencyACFLossLimit Margin RangeFrequency Polarization[ACF] [L C ] (MHz)(MHz)(dB)(dB) (dBuV) (dB) 30-1000-Horizontal(1)(1)AV--0.00(3)(1)-(1) 30-1000-Vertical(1)(1)AV--0.00(3)(1)-(1) 1000-25000-Horizontal(1)(1)AV--0.00(3)(1)54.0(1) 1000-25000-Vertical(1)(1)AV--0.00(3)(1)54.0(1) E Corr = E Meas + ACF E + L C - G A Where ACF E is the Electric Antenna Correction Factor Results: AntennaChannel (1) No Emissions Detected (ND) above ambient or within 20dB of the limit (3) External Amplier not used (dBuV/m) Summary of Radiated Rx Emissions MeasuredAmplifierCorrected EmissionGainEmission Emission Frequency (MHz) Complies [E Meas ][G A ][E Corr ] (dBuV) (dB) Radiated Tx Emissions: 0 10 20 30 40 50 60 101001000 Amplitude (dBuV) Frequency (MHz) Radiated Rx Emissions (30MHz - 1GHz) OATS Horizontal CISPR B Limit New Mkr Radiated Tx Emissions: 0 10 20 30 40 50 60 101001000 Amplitude (dBuV) Frequency (MHz) Radiated Rx Emissions (30MHz -1GHz) OATS Vertical CISPR B Limit DUT "Mkr" Width 5.35" --MHz -- HorizontalNDdBm NDMHzNDdBm Radiated Rx Emissions: Channel:Channel Frequency: Emission Frequency:Measured Channel Power(AV): Mode:Modulation: Polarization:Measured Channel Power(PK): * * B Att 10 dB RBW 100 kHz VBW 1 MHz SWT 100 msRef 90 dBμV Start 30 MHzStop 1 GHz97 MHz/ 3DB *1 RM VIEW -10 0 10 20 30 40 50 60 70 80 90 1 Marker 1 [T1 ] 16.43 dBμV 831.220000000 MHz Date: 3.JUL.2023 12:44:14 Width 5.35" --MHz -- VerticalNDdBm NDMHzNDdBm Emission Frequency:Measured Channel Power(AV): Radiated Rx Emissions: Channel:Channel Frequency: Mode:Modulation: Polarization:Measured Channel Power(PK): * * B Att 10 dB RBW 100 kHz VBW 1 MHz SWT 100 msRef 90 dBμV Start 30 MHzStop 1 GHz97 MHz/ 3DB *1 RM VIEW -10 0 10 20 30 40 50 60 70 80 90 1 Marker 1 [T1 ] 17.51 dBμV 99.840000000 MHz Date: 3.JUL.2023 12:43:21 Width 5.35" --MHz -- HorizontalNDdBm NDMHzNDdBm Emission Frequency:Measured Channel Power(AV): Radiated Rx Emissions: Channel:Channel Frequency: Mode:Modulation: Polarization:Measured Channel Power(PK): Ref 70 dBμV * B Att 0 dB 200 MHz/Start 1 GHzStop 3 GHz * 3DB RBW 1 MHz VBW 10 MHz SWT 10 ms *1 RM VIEW -30 -20 -10 0 10 20 30 40 50 60 70 1 Marker 1 [T1 ] 16.16 dBμV 2.996000000 GHz Date: 3.JUL.2023 12:36:20 Width 5.35" --MHz -- VerticalNDdBm NDMHzNDdBm Emission Frequency:Measured Channel Power(AV): Radiated Rx Emissions: Channel:Channel Frequency: Mode:Modulation: Polarization:Measured Channel Power(PK): Ref 70 dBμV * B Att 0 dB * 200 MHz/Start 1 GHzStop 3 GHz * RBW 1 MHz VBW 10 MHz SWT 10 ms 3DB * *1 RM VIEW -30 -20 -10 0 10 20 30 40 50 60 70 1 Marker 1 [T1 ] 15.65 dBμV 2.972000000 GHz Date: 3.JUL.2023 12:35:07 Width 5.35" --MHz -- HorizontalNDdBm NDMHzNDdBm Emission Frequency:Measured Channel Power(AV): Radiated Rx Emissions: Channel:Channel Frequency: Mode:Modulation: Polarization:Measured Channel Power(PK): Ref 70 dBμV * B 3DB Att 0 dB RBW 1 MHz VBW 10 MHz SWT 140 ms * Start 3 GHzStop 10 GHz700 MHz/ *1 RM VIEW -30 -20 -10 0 10 20 30 40 50 60 70 1 Marker 1 [T1 ] 21.93 dBμV 3.630000000 GHz Date: 3.JUL.2023 12:36:35 Width 5.35" --MHz -- VerticalNDdBm NDMHzNDdBm Emission Frequency:Measured Channel Power(AV): Radiated Rx Emissions: Channel:Channel Frequency: Mode:Modulation: Polarization:Measured Channel Power(PK): Ref 70 dBμV * B 3DB Att 0 dB RBW 1 MHz VBW 10 MHz * Start 3 GHzStop 10 GHz700 MHz/ SWT 140 ms *1 RM VIEW -30 -20 -10 0 10 20 30 40 50 60 70 1 Marker 1 [T1 ] 21.94 dBμV 3.140000000 GHz Date: 3.JUL.2023 12:35:37

MeasuredAntenna Cable FrequencyACFLossLimit Margin RangeFrequency Polarization[ACF] [L C ] (MHz)(MHz)(dB)(dB) (dBuV) (dB) 30-1000 MHzHorizontalND(1)AVn/an/a0.00(3)NDn/a(1) 30-1000 MHzVerticalND(1)AVn/an/a0.00(3)NDn/a(1) 1-18 GHzHorizontalND(1)AVn/an/a0.00(3)NDn/a(1) 1-18GHzVerticalND(1)AVn/an/a0.00(3)NDn/a(1) 18-25 GHzHorizontalND(1)AVn/an/a0.00(3)NDn/a(1) 18 -25 GHzVerticalND(1)AVn/an/a0.00(3)NDn/a(1) E Corr = E Meas + ACF E + L C - G A Where ACF E is the Electric Antenna Correction Factor * Without Manufacturer's Accessories, ** With Manufacturer's Accessories Results: AntennaChannel (1) No Emissions Detected (ND) above ambient or within 20dB of the limit (2) Antenna ACF, Cable Loss and Amplifier Gain corrected in Spectrum Analyzer Transducer Factor (3) External Amplier not used (dBuV/m) Summary of Radiated Tx Emissions MeasuredAmplifierCorrected EmissionGainEmission Emission 2440.0 Frequency (MHz) Complies [E Meas ][G A ][E Corr ] (dBuV) (dB) Radiated Tx Emissions: 0 10 20 30 40 50 60 101001000 Amplitude (dBuV) Frequency (MHz) Radiated Tx Emissions (30MHz - 1GHz) OATS Horizontal CISPR B Limit New Mkr Radiated Tx Emissions: 0 10 20 30 40 50 60 101001000 Amplitude (dBuV) Frequency (MHz) Radiated Tx Emissions (30MHz -1GHz) OATS Vertical CISPR B Limit DUT "Mkr" Width 5.35" 22404 MHz BT BRGFSK Horizontal40.71 dBuV Fundamental MHz Emission Frequency: Radiated Tx Emissions: Channel:Channel Frequency: Mode:Modulation: Polarization:Measured Channel Power: Ref 77 dBμV * A Att 0 dB 200 MHz/Start 1 GHzStop 3 GHz * RBW 1 MHz VBW 10 MHz SWT 10 ms 3DB *1 RM VIEW *2 RM VIEW -20 -10 0 10 20 30 40 50 60 70 1 Marker 1 [T1 ] 40.71 dBμV 2.404020000 GHz Date: 3.APR.2024 16:06:20 Width 5.35" 22404 MHz BT BRGFSK Vertical48.20 dBuV Fundamental MHz Emission Frequency: Radiated Tx Emissions: Channel:Channel Frequency: Mode:Modulation: Polarization:Measured Channel Power: Ref 77 dBμV * A Att 0 dB 200 MHz/Start 1 GHzStop 3 GHz * RBW 1 MHz VBW 10 MHz SWT 10 ms *1 RM VIEW 3DB *2 RM VIEW -20 -10 0 10 20 30 40 50 60 70 1 Marker 1 [T1 ] 48.20 dBμV 2.404020000 GHz Date: 3.APR.2024 16:03:26 Width 5.35" 22404 MHz BT BRGFSK HorizontalNDdBuV NDMHz Emission Frequency: Radiated Tx Emissions: Channel:Channel Frequency: Mode:Modulation: Polarization:Measured Emission Power: Ref 77 dBμV * A Att 0 dB RBW 1 MHz VBW 10 MHz SWT 140 ms * Start 3 GHzStop 10 GHz700 MHz/ 3DB *1 RM VIEW -20 -10 0 10 20 30 40 50 60 70 1 Marker 1 [T1 ] 23.76 dBμV 3.574000000 GHz Date: 3.APR.2024 16:08:26 Width 5.35" 22404 MHz BT BRGFSK VerticalNDdBuV NDMHz Emission Frequency: Radiated Tx Emissions: Channel:Channel Frequency: Mode:Modulation: Polarization:Measured Emission Power: Ref 77 dBμV * A Att 0 dB 700 MHz/Start 3 GHzStop 10 GHz * 3DB RBW 1 MHz VBW 10 MHz SWT 140 ms *1 RM VIEW -20 -10 0 10 20 30 40 50 60 70 1 Marker 1 [T1 ] 24.75 dBμV 3.602000000 GHz Date: 3.APR.2024 16:10:49 Width 5.35" 22404 MHz BT BRGFSK HorizontalNDdBuV NDMHz Emission Frequency: Radiated Tx Emissions: Channel:Channel Frequency: Mode:Modulation: Polarization:Measured Emission Power: Ref 77 dBμV * A 3DB Att 0 dB RBW 1 MHz VBW 10 MHz SWT 75 ms * Start 10 GHzStop 13.6 GHz360 MHz/ *1 RM VIEW -20 -10 0 10 20 30 40 50 60 70 1 Marker 1 [T1 ] 22.00 dBμV 13.240000000 GHz Date: 3.APR.2024 16:08:46 Width 5.35" 22404 MHz BT BRGFSK VerticalNDdBuV NDMHz Emission Frequency: Radiated Tx Emissions: Channel:Channel Frequency: Mode:Modulation: Polarization:Measured Emission Power: Ref 77 dBμV * A 3DB Att 0 dB RBW 1 MHz VBW 10 MHz SWT 75 ms * Start 10 GHzStop 13.6 GHz360 MHz/ *1 RM VIEW -20 -10 0 10 20 30 40 50 60 70 1 Marker 1 [T1 ] 21.96 dBμV 13.240000000 GHz Date: 3.APR.2024 16:11:05 Width 5.35" 22404 MHz BT BRGFSK HorizontalNDdBuV NDMHz Emission Frequency: Radiated Tx Emissions: Channel:Channel Frequency: Mode:Modulation: Polarization:Measured Emission Power: Ref 77 dBμV * A 3DB Att 0 dB RBW 1 MHz VBW 10 MHz SWT 90 ms * Start 13.6 GHzStop 18 GHz440 MHz/ *1 RM VIEW -20 -10 0 10 20 30 40 50 60 70 1 Marker 1 [T1 ] 33.26 dBμV 16.407200000 GHz Date: 3.APR.2024 16:09:08 Width 5.35" 22404 MHz BT BRGFSK VerticalNDdBuV NDMHz Emission Frequency: Radiated Tx Emissions: Channel:Channel Frequency: Mode:Modulation: Polarization:Measured Emission Power: Ref 77 dBμV * A 3DB Att 0 dB RBW 1 MHz VBW 10 MHz SWT 90 ms * Start 13.6 GHzStop 18 GHz440 MHz/ *1 RM VIEW -20 -10 0 10 20 30 40 50 60 70 1 Marker 1 [T1 ] 33.36 dBμV 16.407200000 GHz Date: 3.APR.2024 16:11:21 MeasuredAntenna Cable FrequencyACFLossLimit Margin RangeFrequency Polarization[ACF] [L C ] (MHz)(MHz)(dB)(dB) (dBuV) (dB) 30-1000 MHzHorizontalND(1)AVn/an/a0.00(3)NDn/a(1) 30-1000 MHzVerticalND(1)AVn/an/a0.00(3)NDn/a(1) 1-18 GHzHorizontalND(1)AVn/an/a0.00(3)NDn/a(1) 1-18GHzVerticalND(1)AVn/an/a0.00(3)NDn/a(1) 18-25 GHzHorizontalND(1)AVn/an/a0.00(3)NDn/a(1) 18 -25 GHzVerticalND(1)AVn/an/a0.00(3)NDn/a(1) E Corr = E Meas + ACF E + L C - G A Where ACF E is the Electric Antenna Correction Factor * Without Manufacturer's Accessories, ** With Manufacturer's Accessories Results: AntennaChannel (1) No Emissions Detected (ND) above ambient or within 20dB of the limit (2) Antenna ACF, Cable Loss and Amplifier Gain corrected in Spectrum Analyzer Transducer Factor (3) External Amplier not used (dBuV/m) Summary of Radiated Tx Emissions MeasuredAmplifierCorrected EmissionGainEmission Emission 2440.0 Frequency (MHz) Complies [E Meas ][G A ][E Corr ] (dBuV) (dB) Radiated Tx Emissions: 0 10 20 30 40 50 60 101001000 Amplitude (dBuV) Frequency (MHz) Radiated Tx Emissions (30MHz - 1GHz) OATS Horizontal CISPR B Limit New Mkr Radiated Tx Emissions: 0 10 20 30 40 50 60 101001000 Amplitude (dBuV) Frequency (MHz) Radiated Tx Emissions (30MHz -1GHz) OATS Vertical CISPR B Limit DUT "Mkr" Width 5.35" 22404 MHz BT BRGFSK Horizontal40.71 dBuV Fundamental MHz Emission Frequency: Radiated Tx Emissions: Channel:Channel Frequenc…

Text truncated - open the document above for the full version.