IPH-04879Digital Transmission System Transceiver

Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: December 24, 2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: IPH-04879 FRN: 0005088588 Garmin International, Inc., (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Ben Karsak Manager Compliance Engineering

Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: December 24, 2024 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: IPH-04879 Garmin International, Inc., Garmin certifies that, as of the date of t he filing of the application, Garmin International, Inc. is our designated U.S. agent for service of process for t he above referenced FCC ID. Garmin International, Inc., accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or t he conclusion of any Commission-related proceeding involving the equipment. Garmin International, Inc. accepts, as of the date of t he filing of the application, the obligation of the designated U.S. agent for service of process for t he above referenced FCC ID. Designated U.S. Agent Information: FRN: 0005088588 Name: Garmin International, Inc. Address: 1200 East 151 st Street, Olathe, Kansas, 66062 Contact Person: Ben Karsak Tel.: 913-440-1946 Email: [email protected] Sincerely, Ben Karsak Manager Compliance Engineering

Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: December 24, 2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: IPH-04879 FRN: 0005088588 Garmin International, Inc., (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered Lis t (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Ben Karsak Manager Compliance Engineering

March 6, 2024 Federal Communications Commission Equip Approval Services Post Office Box 358315 Pittsburgh, Pennsylvania 15215-5315 To Whom It May Concern: Pursuant to 47 CFR 2.911, Garmin International, Inc. (Garmin) has authorized Mr. Patrick Powell and Mr. Jeremy Cott of The Compatibility Center LLC to act on Garmin’s behalf for the sole and express purpose of processing applications to the Federal Communication Commission (FCC) for equipment FCC authorization. As such Mr. Powell and Mr. Cott are authorized to: 1) Sign Form 731, 2) Sign letters of application, 3) Request confidentiality, and 4) Exchange data and information with the FCC, and authorized TCBs on behalf of Garmin. This authorization is not assignable to other beyond Mr. Powell and Mr. Cott. This authorization is in effect until notified to the contrary by Garmin. Sincerely, Ben Karsak Manager Compliance Engineering

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: Dec 24, 2024 SUBJECT: FCC Application for FCC ID: IPH-04879 To Whom It May Concern: Garmin will continue to apply processes and procedures t o ensure compliance with 47 CFR 2 requirements regarding products produced under Supplier’s Declaration of Conformity procedure for class B computer peripheral portion as applicable to this composite filing. Sincerely, Tim Olson Senior Compliance Engineer

March 27, 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Innovation, Science and Economic Development Canada Certification and Engineering Bureau 3701 Carling Avenue PO Box 11490, Station H Ottawa, Ontario, Canada K2H 8S2 To Whom It May Concern: Pursuant to 47 CFR 2.911, Garmin International, Inc. (Garmin) has authorized the following Garmin International Associates to act on Garmin's behalf for the sole and express purpose of processing applications to the Federal Communication Commission (FCC) and Innovation, Science and Economic Development Canada (ISED) for equipment authorization or certification. Mr. Niklas Haydon, Compliance Engineering Team Lead Ms. Sara Jones, Design Certification Engineer Mr. Mitchell Phillipi, Compliance Engineering Team Lead Mr. Jacky Yeung, Compliance Engineer Mr. William Pertner, Compliance Engineering Team Lead Mr. Hayden Pernia, Compliance Engineer Mr. Jay Everett, Compliance Engineering Team Lead Mr. Jeremiah Darden, Compliance Engineer Mr. Richard Kockelkoren, Compliance Engineer Mr. Henry Lin, Compliance Engineer Mr. Mike Moranha, Compliance Engineer Ms. Claire Fryman, Compliance Engineer Ms. Pam Sequeira, Compliance Engineer Mr. Rick Jankovics, Compliance Engineer Mr. Jeffrey Hailey, Compliance Engineer Mr. Brodie Halbfoster, Compliance Engineer Mr. Dan Irish, Compliance Engineer Mr. Mike Royer, Compliance Engineer Mr. Jonathan Shafer, Design Certification Engineer Mr. Tim Olson, Compliance Engineer As such, the Garmin Associates listed above are authorized to: 1) sign Form 731, 2) sign letters of application, 3) request confidentiality, and 4) exchange data and information with the FCC, IC and/or authorized TCBs on behalf of Garmin. In addition, these individuals shall be considered "authorized individuals" to act on Garmin's behalf where an "authorized individual's" attestation is necessary or preferred. This authorization remains in effect until notified to the contrary by Garmin. Sincerely, Ben Karsak Manager Compliance Engineering Garmin International, Inc.

File: A04879 Submittal letter Page 1 of 1 March 30, 2025 Timco Engineering Inc. 13146 NW 86th DR. Suite 400 Alachua, FL 32615 Applicant: Garmin International, Inc. 1200 East 151st Street Olathe, KS 66062 CORES number: 0005088588 Equipment: FCC ID: IPH-04879 FCC Rules: Parts 2, 15C To Whom It May Concern: The form 731 and application have been electronically submitted and any attachments will be uploaded to your web site for use in obtaining a grant of certification. Confidentiality is requested as outlined below. Permanent Garmin International, Inc. requests that the material in the Block Diagram, Operational Descriptions and Schematics be withheld from public disclosure pursuant to Sections 0.457 and 0.459 of the Commission’s Rules following grant of the application. A statement of confidentiality will be attached with the application at the time of submittal. CONFIDENTIAL FILES A04879 blk diagram.pdf A04879 Operational Descriptions.pdf A04879 Schematic (confidential).pdf Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Best Regards, Patrick Powell Rogers Labs, a division of The Compatibility Center LLC Enclosures Rogers Labs, a division of The Compatibility Center LLC 7915 Nieman Rd. Lenexa, KS 66214 Phone / Fax (913) 660-0666

A04879 Short Term Confidential request Letter March 30, 2025 April 7, 2025 Timco Engineering Inc. 13146 NW 86th DR. Suite 400 Alachua, FL 32615 Applicant: Garmin International, Inc. 1200 East 151st Street Olathe, KS 66062 Re: Short-term Confidentiality request for submittal information regarding FCC ID: IPH-04879 FCC Rules: Parts 2 and 15C Dear Sirs: Garmin International, Inc. requests that the following information be withheld from public disclosure pursuant to CFR47 paragraphs 0.457 and 0.459, and KDB 726920 for 180 Days. Disclosure of information would offer competitors additional unwarranted insight into the state of the product development. Short-term confidential files File A04879 Short Term Conf ExtPho.pdf A04879 Short Term Conf IntPho.pdf A04879 Short Term Conf TSup.pdf A04879 OM.pdf A04879 OM2.pdf Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Best Regards, Patrick Powell Rogers Labs, a division of The Compatibility Center LLC Rogers Labs, a division of The Compatibility Center LLC 7915 Nieman Rd. Lenexa, KS 66214 Phone / Fax (913) 660-0666

File: A04879 Confidential Request Letter Page 1 of 2 March 30, 2025 Timco Engineering Inc. 13146 NW 86th DR. Suite 400 Alachua, FL 32615 Applicant: Garmin International, Inc. 1200 East 151st Street Olathe, KS 66062 Re: Confidentiality for submittal information regarding FCC ID: IPH-04879 Product: Transmitter operated under 47CFR Section 15C Dear Sirs: Garmin International, Inc. requests that the material in the Block Diagram, Operational Descriptions, and Schematic be withheld from public disclosure pursuant to Sections 0.457 and 0.459 of the Commission’s Rules following grant of the application. In support of this request, Garmin International, Inc. submits the following information. CONFIDENTIAL FILES A04879 blk diagram.pdf A04879 Operational Descriptions.pdf A04879 Schematic (confidential).pdf 1. Identification of the specific information for which confidential treatment is sought: The materials set forth in the Block Diagram, Operational Descriptions, and Schematic which are segregated, from the non-confidential exhibits of the application, are those for which confidentiality is sought. 2. Identification of the Commission proceeding in which the information was submitted or a description of the circumstances giving rise to the submission: The proceeding is that involving the application for equipment authorization (certification) under FCC ID: IPH-04879 3. Explanation of the degree to which the information is commercial or financial, or contains a trade secret or is privileged: This material includes a detailed Block Diagram, Operational Descriptions, and Schematic. As such, this material is treated as highly confidential business information. 4. Explanation of the degree to which the information concerns a service that is subject to competition: Rogers Labs, a division of The Compatibility Center LLC 7915 Nieman Rd. Lenexa, KS 66214 Phone / Fax (913) 660-0666 File: A04879 Confidential Request Letter Page 2 of 2 The material for which confidentiality is sought is employed in the design and manufacture of this transmitting equipment that is offered on a highly competitive basis. Customers for this equipment have a variety of competing sources. 5. Explanation of how disclosure of the information could result in substantial competitive harm: Disclosure would, in effect, give away the fruits of the labors of Garmin International, Inc.’s engineering personnel, who have designed the equipment and the manufacturing process. Disclosure would also offer competitors additional unwarranted insight into the state of the product development, thereby allowing competitors an advantage, not available to Garmin International, Inc. 6. Identification of any measures taken by the submitting party to prevent unauthorized disclosure: The information for which confidential treatment is sought is kept confidential by Garmin International, Inc. and not made available to third parties except pursuant to non-disclosure agreements. 7. Identification of whether the information is available to the public and the extent of any previous disclosure of the information to third parties: To the knowledge of those preparing this application, the information has not been disclosed publicly heretofore. While the general theory of operation of this equipment has been the subject of numerous disclosures in industry the protection sought is narrowly drawn as provided in regulations. 8. Justification of the period during which the submitting party asserts that the material should not be available for public disclosure: This material should not be disclosed for at least 25 years. While improvements in design are made relatively frequently, disclosure of the design information would lead to insights into both design and manufacturing techniques that could have an adverse competitive effect for many years to come. As such, it is important that the design not be made available to unauthorized persons who might attempt to use knowledge of the design to compromise the applications for which the equipment will be employed. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Best Regards, Patrick Powell Rogers Labs, a division of The Compatibility Center LLC

A04879 Label Drawing Label Placements Back of unit Label MADE IN TAIWAN FCC ID: IPH-04879 M/N: A04879 IC: 1792A-04879 S/N: XXXXXXXXX This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1)This device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Cable flag Main label C able flag

Garmin A04879 MPE Exhibit HVIN/PMN: A04879 47CFR 1.1310, RSS-102 Issue 6 Rogers Labs, a division of The Compatibility Center LLC Garmin International, Inc. 7915 Nieman Road FCC ID: IPH-04879 IC: 1792A-04879 PMN: A04879 Lenexa, KS 66214 Test: 250123 SN’s: 3506634746, 3506634716 Phone/Fax: (913) 660-0666 Test to: 47CFR 2.1310, RSS-102 Iss.6 Date: April 11, 2025 Revision\ 1 File: A04879 MPE FCC-IC r1 Page 1 of 3 MPE – WiFi and Summary GarminA04879 Test Number:250123 MPE CalculatorThe Usage Case for this product is in a Public / Uncontrolled Environment w/ > 20cm separation MPE uses EIRP for calculation. EIRP is based on TX power added to the antenna gain in dBi. dBi = dB gain compared to an isotropic radiator. S = power density in mW/cm^2 Antenna Gain (dBi)3.51 dBd + 2.17 = dBidBi to dBd2.2 Tx Frequency (MHz)2462Peak Power (Watts)0.0542Antenna Gain (dBd)1.34 Peak Power (mW)54.2 Cable Loss (dB)0.0(dBm)17.3Antenna minus cable (dBi)3.51 Max Duty Cycle (%)100.0% Adjusted Power (mW)54.2 Adjusted Power (dBm)17.3 Calculated ERP (mw)73.790EIRP = Po(dBM) + Gain (dB) Calculated EIRP (mw)121.619Radiated (EIRP) dBm20.850 ERP = EIRP - 2.17 dB Occupational Limit Radiated (ERP) dBm18.680 5 mW/cm 2 50.00000 W/m 2 General Public Limit 1 mW/cm 2 10.00000 W/m 2 Frequency (MHz) Occupational Limit W/mPublic Limit W/m 2 Frequency (MHz) 300-1,500f/30f/15010-201.01.0 1,500-100,000501020-48 4.49/ƒ 0.5 4.49/ƒ0.5 2462.0501048-3000.60.60 300-6,000 (1.31*10 -2 )*ƒ 0.6834 2.72 6,000-15,0005.05.0 FCCISED f = Transmit Frequecny (MHz) f (MHz) =24622462MHz P T = Power Input to Antenna (mW) P T (mW) = 54.254.2 mW Duty cycle (percentage of operation) % =100.0%100.0% % P A = Adjusted Power due to Duty cycle or Cable Loss (mW) P A (mW) = 54.2054.20 mW G N = Numeric Gain of the Antenna GN (numeric) =2.172.17numeric S 20 = Power Density of device at 20cm (mW/m 2 ) S 20 =(P A G N )/(4πR 20 ) 2 S 20 ( mW/ m 2 ) = 0.020.02 mW/ m 2 S 20 = Power Density of device at 20cm (W/m 2 ) S 20 =(P A G N )/(4πR 20 ) 2 S 20 (W/m 2 ) = 0.230.23 W/m 2 S L = Power Density Limit (W/m 2 ) S L (W/m 2 )= 10.002.72 W/m 2 R C = Minimum distance to the Radiating Element for Compliance (cm) R C =√ (P A G N /4πS L )R C (cm) =4.16.9cm S C = Power Density of the device at the Compliance Distance R C (W/m 2 ) S C =(P A G N )/(4πR C ) 2 S C (W/m 2 ) = 5.681.99 W/m 2 R 20 = 20cm R20=2020cm For Compliance with Use Case Limits4.16.9cm Or in Meters for Complaince with Use Case Limits0.040.07Meters RadioTx Duty Cycle (%)Tx Frequeny (MHz)Power Total (mW) Antenna Gain (num.) FCC S L (W/m 2 )ISED S L (W/m 2 )S 20 (W/m 2 ) R C ( c m) S C (W/m 2 ) BLE100%24021.152.210.02.680.0051.40.9 WiFi 802.11b100%246254.202.210.02.720.2344.15.7 BLEWiFi 802.11bBLE WiFi 802.11b Tx Frequeny (MHz)24022462Tx Frequeny (MHz)24020.233986 S 20 (W/m 2 ) 0.0050.234 S 20 (W/m 2 ) 0.0050.234 S L (W/m 2 ) 10.00010.000 S L (W/m 2 ) 2.682.72 Power Ratio (S L / S 20 )0.00050.023 Power Ratio (S L / S 20 ) 0.0020.086 Sum of Power Ratios at 20cm: 0.024 Sum of Power Ratios at 20cm: 0.088 Requirement = Σ of MPE Ratio ≤ 1Requirement = Σ of MPE Ratio ≤ 1 FCC radio frequency radiation exposure limits per 1.1310 IC radio frequency radiation exposure limits per RSS-102, Issue 6 Field Reference Level FRL Limit (W/m 2 ) Mobile Summary: Standalone MPE Calculations and Summary FCC Simlutaneous MPE CalculationISED Simlutaneous MPE Calculation Power density (S) EIRP -------= mW/cm^2 4 pr^2 r (cm) EIRP (mW) Garmin A04879 MPE Exhibit HVIN/PMN: A04879 47CFR 1.1310, RSS-102 Issue 6 Rogers Labs, a division of The Compatibility Center LLC Garmin International, Inc. 7915 Nieman Road FCC ID: IPH-04879 IC: 1792A-04879 PMN: A04879 Lenexa, KS 66214 Test: 250123 SN’s: 3506634746, 3506634716 Phone/Fax: (913) 660-0666 Test to: 47CFR 2.1310, RSS-102 Iss.6 Date: April 11, 2025 Revision\ 1 File: A04879 MPE FCC-IC r1 Page 2 of 3 MPE – BLE GarminA04879 Test Number:250123 MPE Calculator The Usage Case for this product is in a Public / Uncontrolled Environment w/ > 20cm separation MPE uses EIRP for calculation. EIRP is based on TX power added to the antenna gain in dBi. dBi = dB gain compared to an isotropic radiator. S = power density in mW/cm^2 A ntenna Gain (dBi)3.51 dBd + 2.17 = dBidBi to dBd2.2 Tx Frequency (MHz)2402Peak Power (Watts)0.0011Antenna Gain (dBd)1.34 Peak Power (mW)1.1 Cable Loss (dB)0.0(dBm)0.6Antenna minus cable (dBi)3.51 Max Duty Cycle (%)100.0% Adjusted Power (mW)1.1 Adjusted Power (dBm)0.6 Calculated ERP (mw)1.563EIRP = Po(dBM) + Gain (dB) Calculated EIRP (mw)2.576Radiated (EIRP) dBm4.110 ERP = EIRP - 2.17 dB Occupational Limit Radiated (ERP) dBm1.940 5 mW/cm 2 50.00000 W/m 2 General Public Limit 1 mW/cm 2 10.00000 W/m 2 Frequency (MHz) Occupational Limit W/mPublic Limit W/m 2 Frequency (MHz) 300-1,500f/30f/15010- 201.01.0 1,500-100,000501020-48 4.49/ƒ 0.5 0.1 2402.0501048- 3000.61.29 300-6,000 (1.31*10 -2 )*ƒ 0.6834 2.68 6,000-15,0005.05.0 FCCISED f = Transmit Frequecny (MHz) f (MHz) =24022402MHz P T = Power Input to Antenna (mW) P T (mW) = 1.11.1 mW Duty cycle (percentage of operation) % =100.0%100.0% % P A = Adjusted Power due to Duty cycle or Cable Loss (mW) P A (mW) = 1.151.15 mW G N = Numeric Gain of the Antenna GN (numeric) =2.172.17numeric S 20 = Power Density of device at 20cm (mW/m 2 ) S 20 =(P A G N )/(4πR 20 ) 2 S 20 ( mW/ m 2 ) = 0.00050.0005 mW/ m 2 S 20 = Power Density of device at 20cm (W/m 2 ) S 20 =(P A G N )/(4πR 20 ) 2 S 20 (W/m 2 ) = 0.0050.005 W/m 2 S L = Power Density Limit (W/m 2 ) S L (W/m 2 )= 10.002.68 W/m 2 R C = Minimum distance to the Radiating Element for Compliance R C =√ (P A G N /4π S L )R C (cm) =1.41.9cm S C = Power Density of the device at the Compliance Distance R C ( S C =(P A G N )/(4πR C ) 2 S C (W/m 2 ) = 0.950.57 W/m 2 R 20 = 20cm R20=2020cm For Compliance with Use Case Limits1.41.9cm O r in Meters for Complaince with Use Case Limits0.010.02Meters Radio Tx Duty Cycle (%Tx Frequeny (MHz)Power Total (mW)Ant. Gain (numeric) FCC S L (W/m 2 )ISED S L (W/m 2 ) S 20 (W/m 2 ) R C …

Text truncated - open the document above for the full version.

NVLAP Lab Code 200087-0 Rogers Labs, a division of The Compatibility Center LLC Garmin International, Inc. 7915 Nieman Road FCC ID: IPH-04879 IC: 1792A-04879 PMN: A04879 Lenexa, KS 66214 Test: 250123 SN’s: 3506634746, 3506634716 Phone/Fax: (913) 660-0666 Test to: 47CFR 15C, RSS-Gen RSS-247 Date: April 14, 2025 Revision 2 File: A04879 DTS TstRpt 250123 r2 Page 1 of 65 47CFR, PART 15C - Intentional Radiators 47CFR Paragraph 15.247 and Industry Canada RSS-247 Issue 3 and RSS-GEN Issue 5 Application For Grant of Certification Model: A04879 2402-2480 and 2412-2462 MHz Digital Transmission System (DTS) FCC ID: IPH-04879 IC: 1792A-04879 Garmin International, Inc. 1200 East 151st Street Olathe, KS 66062 Tim Olson Senior Compliance Engineer Test Report Number: 250123 Test Date: January 23, 2025 – March 6, 2025 Authorized Signatory: Patrick Powell Rogers Labs, a division of The Compatibility Center LLC FCC Designation: US5305 ISED Registration: 3041A This report shall not be reproduced except in full, without the written approval of the laboratory. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Rogers Labs, a division of The Compatibility Center LLC 7915 Nieman Rd. Lenexa, KS 66214 Phone / Fax (913) 660-0666 NVLAP Lab Code 200087-0 Rogers Labs, a division of The Compatibility Center LLC Garmin International, Inc. 7915 Nieman Road FCC ID: IPH-04879 IC: 1792A-04879 PMN: A04879 Lenexa, KS 66214 Test: 250123 SN’s: 3506634746, 3506634716 Phone/Fax: (913) 660-0666 Test to: 47CFR 15C, RSS-Gen RSS-247 Date: April 14, 2025 Revision 2 File: A04879 DTS TstRpt 250123 r2 Page 2 of 65 Table of Cont ents Table of Cont ents TABLE OF CONTENTS .................................................................................................. 2 REVISIONS ..................................................................................................................... 5 EXECUTIVE SUMMARY ................................................................................................ 6 OPINION / INTERPRETATION OF RESULTS ............................................................... 7 EQUIPMENT TESTED .................................................................................................... 9 Equipment Operational Modes ........................................................................................................................... 9 Equipment Function .......................................................................................................................................... 10 Equipment Configuration.................................................................................................................................. 11 ENVIRONMENTAL CONDITIONS................................................................................ 11 APPLICATION FOR CERTIFICATION ......................................................................... 12 TEST SITE LOCATIONS .............................................................................................. 13 UNITS OF MEASUREMENTS ...................................................................................... 14 STATEMENT OF MODIFICATIONS AND DEVIATIONS ............................................. 15 APPLICABLE STANDARDS ........................................................................................ 15 INTENTIONAL RADIATORS ........................................................................................ 15 Antenna Requirements ...................................................................................................................................... 15 TEST PROCEDURES ................................................................................................... 16 AC Line Conducted Emission Test Procedure ................................................................................................ 16 Radiated Emission Procedure ........................................................................................................................... 16 Antenna Port Conducted Emission Test Procedure ........................................................................................ 16 Diagram 1 Test arrangement for power-line conducted emissions ................................................................ 17 Diagram 2 Test arrangement for radiated emissions of tabletop equipment................................................ 18 Diagram 3 Test arrangement for radiated emissions tested in Semi-Anechoic Chamber (SAC) and Outdoor Area Test Site (OATS) ....................................................................................................................... 19 NVLAP Lab Code 200087-0 Rogers Labs, a division of The Compatibility Center LLC Garmin International, Inc. 7915 Nieman Road FCC ID: IPH-04879 IC: 1792A-04879 PMN: A04879 Lenexa, KS 66214 Test: 250123 SN’s: 3506634746, 3506634716 Phone/Fax: (913) 660-0666 Test to: 47CFR 15C, RSS-Gen RSS-247 Date: April 14, 2025 Revision 2 File: A04879 DTS TstRpt 250123 r2 Page 3 of 65 Diagram 4 Test arrangement for Antenna Port Conducted emissions .......................................................... 20 RESTRICTED BANDS OF OPERATION ..................................................................... 21 Table 1 Radiated Emissions in Restricted Frequency Bands Data Mode 1, BT BLE .................................. 21 Table 2 Radiated Emissions in Restricted Frequency Bands Data Mode 2, 802.11b ................................... 22 Table 3 Radiated Emissions in Restricted Frequency Bands Data Mode 3, 802.11g ................................... 23 Table 4 Radiated Emissions in Restricted Frequency Bands Data Mode 4, 802.11n ................................... 24 Summary of Results for Radiated Emissions in Restricted Bands ................................................................ 24 AC LINE CONDUCTED EMI PROCEDURE .....…

Text truncated - open the document above for the full version.

Antenna Data Sheet Antenna Manufacturer Information: Antenna(s) are manufactured and designed at Garmin headquarters located at 1200 E. 151 st Street, Olathe, KS, 66062, USA. Garmin is an antenna manufacturer that specializes in antenna construction and has been a technology leader in high performance antenna design for over thirty years. State-of -the art equipment is used to design, measure, and analyze new designs that are superior to competitor de signs and highly proprietary in nature. Antenna Description: This data sheet contains the antenna gain information for the A04879-A1 for Garmin Model A04879. The approximate operational frequency band of these technologies is given, and the maximum gain within the frequency band is shown in table 1. Table 1 Antenna Gain: Antenna Model Number Antenna Type Antenna Maximum Gain @ Frequency Antenna Approximate Frequency Band A04879-A1 PIFA 3.51 dBi @ 2420 MHz2402 to 2480 MHz Additional Information: Contact Garmin for other information regarding antenna design, dimensions, cable length, etc.