IPH-04918Portable Digital Transceiver

Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: July 18, 2025 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: IPH-04918 Garmin International, Inc., Garmin certifies that, as of the date of the filing of the application, Garmin International, Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. Garmin International, Inc., accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Garmin International, Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. Designated U.S. Agent Information: FRN: 0005088588 Name: Garmin International, Inc. Address: 1200 East 151 st Street, Olathe, Kansas, 66062 Contact Person: Ben Karsak Tel.: 913-440-1946 Email: [email protected] Sincerely, Ben Karsak Manager Compliance Engineering

Rev 01/24/2025 Date: 7/18/2025 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: IPH-04918 1. Garmin International, Inc., (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. Garmin International, Inc., (“the applicant”) certifies that, the device does not have cybersecurity and / or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, identified on the Covered List installed on the device, nor will it be installed by the applicant anytime after certification. 3. Garmin International, Inc., (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name: Ben Karask Job Title: Manager Compliance Engineering Company Name: Garmin International, Inc.

REQUEST FOR CONFIDENTIALITY Date: July 18, 2025 Applicant: Garmin International Subject: Confidentiality Request for FCC ID: IPH-04918 IC: 1792A-04918 Pursuant to FCC 47 CFR 0.457(d) and 0.459, and IC RSP-100 Section 12.4, we request that a part of the FCC and ISED application be held confidential. Type Of Confidentiality Requested Exhibit ☐ Short Term ☒ Permanent ☐ Not Provided Block Diagrams ☐ Short Term ☒ Permanent ☐ Not Provided Schematics ☐ Short Term ☒ Permanent ☐ Not Provided Operational Description/ Theory of Operation ☐ Short Term ☐ Permanent ☒ Not Provided Parts List & Placement/BOM ☐ Short Term ☒ Permanent ☐ Not Provided Tune-Up Procedure ☒ Short Term ☐ Permanent ☐ Not Provided Test Setup Photos ☒ Short Term ☐ Permanent ☐ Not Provided User’s Manual(s) ☒ Short Term ☐ Permanent ☐ Not Provided External Photos ☒ Short Term ☐ Permanent ☐ Not Provided Internal Photos Garmin International has spent a substantial effort in developing this product and it is one of the first of its kind in the industry. Having the subject information easily available to "competition" would negate the advantage we have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: Garmin requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality (if applicable): The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Sincerely, Jacky Yeung Senior Compliance Engineer

April 16, 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Innovation, Science and Economic Development Canada Certification and Engineering Bureau 3701 Carling Avenue PO Box 11490, Station H Ottawa, Ontario, Canada K2H 8S2 To Whom It May Concern: Pursuant to 47 CFR 2.911, Garmin International, Inc. (Garmin) has authorized the following Garmin International Associates to act on Garmin's behalf for the sole and express purpose of processing applications to the Federal Communication Commission (FCC) and Innovation, Science and Economic Development Canada (ISED) for equipment authorization or certification. Mr. Niklas Haydon, Compliance Engineering Team Lead Ms. Sara Jones, Design Certification Engineer Mr. Mitchell Phillipi, Compliance Engineering Team Lead Mr. Jacky Yeung, Compliance Engineer Mr. William Pertner, Compliance Engineering Team Lead Mr. Hayden Pernia, Compliance Engineer Mr. Jay Everett, Compliance Engineering Team Lead Mr. Jeremiah Darden, Compliance Engineer Mr. Richard Kockelkoren, Compliance Engineer Mr. Henry Lin, Compliance Engineer Mr. Mike Moranha, Compliance Engineer Ms. Claire Fryman, Compliance Engineer Ms. Pam Sequeira, Compliance Engineer Mr. Rick Jankovics, Compliance Engineer Mr. Jeffrey Hailey, Compliance Engineer Mr. Brodie Halbfoster, Compliance Engineer Mr. Dan Irish, Compliance Engineer Mr. Tim Olson, Compliance Engineer Mr. Jonathan Shafer, Design Certification Engineer As such, the Garmin Associates listed above are authorized to: 1) sign Form 731, 2) sign letters of application, 3) request confidentiality, and 4) exchange data and information with the FCC, IC and/or authorized TCBs on behalf of Garmin. In addition, these individuals shall be considered "authorized individuals" to act on Garmin's behalf where an "authorized individual's" attestation is necessary or preferred. This authorization remains in effect until notified to the contrary by Garmin. Sincerely, Ben Karsak Manager Compliance Engineering Garmin International, Inc.

APPLICANT: Garmin Intl FCC ID: IPH-04918 IC: 1792A-04918 M/N: A04918 IC: 1792A-04918 FCC ID: IPH-04918 Exhibit 10: Identification Label Label and E-Label Description 1. The following specific instructions are provided in the user’s manual that is provided with the device: a) Label viewing directions are found in the user manual, which is available at www.garmin.com b) To get the owner’s manual, go www.garmin.com/manuals 2. The following specific instructions are provided in the owner’s manual that is provided at www.garmin.com/manuals: display the following information. APPLICANT: Garmin Intl FCC ID: IPH-04918 IC: 1792A-04918 3. The above information is programmed by Garmin in such a manner that third-parties cannot modify it. - The regulatory information and dedicated exclusive application or script is secured and implemented in a factory-set-unalterable format. The regulatory information is capable of being retrieved and displayed locally, and under the control of the end user in possession of the product. - “No special accessories or supplemental plug-ins (e.g., installation of a SIM/USIM card) are required to access the information. Access to the information is provided without special codes, accessories, or permissions beyond the normal security protection to unlock the screen, sign-in page, or overall product access.” - Electronically displayed information is clearly legible without the aid of magnification. 4. The above M/N, FCC ID, and IC numbers can be found printed on the product packaging.

Head Tissue Simulating Liquids Application Specific absorption rate according to standards (e.g., IEC 62209-x, IEEE 1528) Packaging Plastic container of 10 liters with nozzle Life Time Life time and stability of the liquid depend on usage, storage, and handling of tissue simulating liquid Options Tissue simulating liquids for frequencies outside the below listed ranges are available upon request (please contact [email protected]) Head Tissue Parameters according to IEEE 1528 / IEC 62209-1/ IEC 62209-2 / FCC KDB 865664 Narrow- Band Solutions (±5% Tolerance) Product HSL300V2 HSL450V2 HSL750V2 HSL900V2 Test Frequency (MHz) 300 450 750 835, 900 Main Ingredients Water, Sugar Water, Sugar Water, Sugar Water, Sugar Broad- Band Solutions (±5% Tolerance) Product HBBL1350-1850V3 HBBL1550-1950V3 HBBL1900-3800V3 HBBL3500-5800V5 Test Frequency (MHz) 1450 – 1800 1750 – 1850 1950 – 3000 3500 – 5800 Main Ingredients Water, Tween Water, Tween Water, Tween Water, Oil Broad- Band Solutions (±10% Tolerance) Product HBBL4-250V3 HBBL1350-1850V3 HBBL1550-1950V3 HBBL1900-3800V3 HBBL600-10000V6 Test Frequency (MHz) 4 – 250 1300 – 1850 1550 – 1950 1900 – 3800 600 – 10000 Main Ingredients Water, Tween Water, Tween Water, Tween Water, Tween Water, Oil

Plot No. 1 UL LLC SAR 1A Date/Time: 2025-06-05, 16:29 WLAN 2.4GHz: IEEE 802.11b WiFi 2.4 GHz (DSSS, 1 Mbps, 99pc duty cycle) Channel 11, BACK Exposure Conditions Band WLAN 2.4GHz TSL Permittivity 40.0 Frequency [MHz] | Channel Number 2462.000 | 11 TSL Conductivity [S/m] 1.86 Group | UID WLAN | 10415-AAA Phantom Section | TSL Flat | HSL Conversion Factor 7.73 Test Distance [mm] 0.00 Hardware Setup Probe | Calibration Date EX3DV4 - SN7709 | 2024-11-11 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1714 | 2024-11-06 TSL Type HBBL1900-3800V3 Software Version 16.4.0.5005 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 80.0 x 80.0 37.4 x 40.8 x 33.4 Grid Steps [mm] 10.0 x 10.0 3.4 x 3.4 x 1.4 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 67.1 Dist 3dB Peak [mm] 4.0 MAIA Y Y Peak SAR [W/kg], SAR Peak Location [mm] N/A 1.10, -35.8, 7.2, -200.5 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0.315 0.284 psSAR10g [W/Kg] 0.141 0.118 Power Drift [dB] -0.03 -0.15 Plot No. 2 UL LLC SAR 1A Date/Time: 2025-05-30, 10:44 ISM 2.4 GHz Band: IEEE 802.15.1 Bluetooth (GFSK, DH5) Channel 39, FRONT Exposure Conditions Band ISM 2.4 GHz Band TSL Permittivity 40.5 Frequency [MHz] | Channel Number 2441.000 | 39 TSL Conductivity [S/m] 1.72 Group | UID Bluetooth | 10032-CAA Phantom Section | TSL Flat | HSL Conversion Factor 7.73 Test Distance [mm] 10.00 Hardware Setup Probe | Calibration Date EX3DV4 - SN7709 | 2024-11-11 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1714 | 2024-11-06 TSL Type HBBL600-10000V6 Software Version 16.4.0.5005 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 80.0 x 80.0 30.0 x 30.0 x 31.2 Grid Steps [mm] 10.0 x 10.0 5.0 x 5.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 86.2 Dist 3dB Peak [mm] 12.9 MAIA Y Y Peak SAR [W/kg], SAR Peak Location [mm] N/A 0.075, -25.3, 1.1, -202.0 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0.046 0.048 psSAR10g [W/Kg] 0.025 0.027 Power Drift [dB] -0.17 -0.11 Plot No. 3 UL LLC SAR 1A Date/Time: 2025-06-10, 19:40 Custom Band: NFC, BACK Exposure Conditions Band Custom Band TSL Permittivity 54.0 Frequency [MHz] | Channel Number 13.600 | 13600 TSL Conductivity [S/m] 0.718 Group | UID CW | 0-- Phantom Section | TSL Flat | HSL Conversion Factor 16.92 Test Distance [mm] 0.00 Hardware Setup Probe | Calibration Date EX3DV4 - SN7710 | 2025-01-14 Phantom ELI V8.0 (20deg probe tilt) DAE | Calibration Date DAE4 Sn1715 | 2025-01-13 TSL Type HBBL4-250V3 Software Version 16.4.0.5005 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 90.0 x 90.0 N/A Grid Steps [mm] 15.0 x 15.0 N/A Sensor Surface [mm] 3.0 N/A Graded Grid N/A N/A M2/M1 [%] N/A Dist 3dB Peak [mm] N/A MAIA Y N/A Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0 N/A psSAR10g [W/Kg] 0 N/A Power Drift [dB] -0.43 N/A

Plot No. 1 Test Laboratory: UL LLC SAR 1A Date/Time: 2025-05-29, 19:40 2025-05-29 System Performance Check Report D2450V2 - SN963 Summary Dipole D2450V2 - SN963 Frequency [MHz] 2450.0 Phantom Section | TSL Flat | Head Simulating Liquid Dev. Peak [%] -8.3 Power [dBm] 17.0 Iso. Error [%] 0.5 Exposure Conditions Dipole Distance [mm] 10 TSL Permittivity 40.5 Conversion Factor 7.73 TSL Conductivity [S/m] 1.73 Hardware Setup Probe | Calibration Date EX3DV4 - SN7709 | 2024-11-11 Phantom Twin-SAM V8.0 (30deg probe tilt) - SN2084 DAE | Calibration Date DAE4 Sn1714 | 2024-11-06 TSL | Meas. Date HBBL600-10000V6 | 2025-05-29 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 80.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 10.0 5.0 x 5.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 82.7 Dist 3dB Peak [mm] 9.1 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 2.54 2.49 psSAR10g [W/Kg] 1.18 1.19 Power Drift [dB] -0.03 0.00 Plot No. 2 Test Laboratory: UL LLC SAR 1A Date/Time: 2025-06-10, 18:20 2025-06-10 System Performance Check Report CLA-13 - SN1017 Summary Dipole CLA-13 - SN1017 Frequency [MHz] 13.0 Phantom Section | TSL Flat | Head Simulating Liquid Dev. Peak [%] n/a Power [dBm] 17.0 Iso. Error [%] 2.0 Exposure Conditions Dipole Distance [mm] 0 TSL Permittivity 54.0 Conversion Factor 16.92 TSL Conductivity [S/m] 0.718 Hardware Setup Probe | Calibration Date EX3DV4 - SN7710 | 2025-01-14 Phantom ELI V8.0 (20deg probe tilt) - SN2081 DAE | Calibration Date DAE4 Sn1715 | 2025-01-13 TSL | Meas. Date HBBL4-250V3 | 2025-06-10 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 90.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 75.7 Dist 3dB Peak [mm] 15.6 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0.026 0.025 psSAR10g [W/Kg] 0.021 0.016 Power Drift [dB] -0.01 -0.02

SAR EVALUATION REPORT IEEE Std 1528-2013 For Portable Digital Transceiver FCC ID: IPH-04918 Model Name: A04918 Report Number: R15769270-S1a Issue Date: 2025-06-27 Prepared for Garmin International Inc. 1200 E 151st St Olathe, KS, 66060-3426, US Prepared by UL LLC 12 LABORATORY DR RTP, NC 27709, U.S.A. TEL: (919) 549-1400 Report No.: 15769270-S1a Issue Date: 2025-06-27 Page 2 of 28 UL LLC Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL LLC Revision History Rev. Date Revisions Revised By V1 2025-06-27 Initial Issue -- Report No.: 15769270-S1a Issue Date: 2025-06-27 Page 3 of 28 UL LLC Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL LLC Table of Contents 1. Attestation of Test Results ......................................................................................................... 5 2. Test Specification, Methods and Procedures............................................................................ 6 3. Facilities and Accreditation ........................................................................................................ 7 4. SAR Measurement System & Test Equipment .......................................................................... 8 4.1. SAR Measurement System ........................................................................................................ 8 4.2. SAR Scan Procedures ............................................................................................................... 9 4.3. Test Equipment ........................................................................................................................ 11 5. Measurement Uncertainty ......................................................................................................... 12 6. Device Under Test (DUT) Information ...................................................................................... 13 6.1. DUT Description ...................................................................................................................... 13 6.2. Wireless Technologies ............................................................................................................. 13 7. RF Exposure Conditions (Test Configurations) ...................................................................... 14 7.1. Standalone SAR Test Exclusion Considerations ...................................................................... 14 7.2. Required Test Configurations .................................................................................................. 15 8. Dielectric Property Measurements & System Check .............................................................. 16 8.1. Dielectric Property Measurements ........................................................................................... 16 8.2. System Check .......................................................................................................................... 17 9. Conducted Output Power Measurements ................................................................................ 18 9.1. Wi-Fi 2.4GHz (DTS Band)........................................................................................................ 18 9.2. Bluetooth ................................................................................................................................. 20 9.3. ANT ......................................................................................................................................... 22 9.4. NFC ......................................................................................................................................... 22 10. Measured and Reported (Scaled) SAR Results ....................................................................... 22 10.1. Wi-Fi (DTS Band) ................................................................................................................. 24 10.2. Bluetooth .............................................................................................................................. 24 10.3. NFC...................................................................................................................................... 24 10.4. Standalone SAR Test Exclusion Considerations & Estimated SAR ...................................... 25 11. SAR Measurement Variability ................................................................................................... 26 12. Simultaneous Transmission Conditions ................................................................................. 27 12.1. Simultaneous transmission SAR test exclusion considerations ............................................ 27 12.2. Sum of the SAR for Wi-Fi & NFC .......................................................................................... 27 12.3. Sum of the SAR for Bluetooth & NFC ................................................................................... 27 12.4. Sum of the SAR for ANT/ANT+ and NFC ............................................................................. 27 Report No.: 15769270-S1a Issue Date: 2025-06-27 Page 4 of 28 UL LLC Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL LLC Appendixes .......................................................................................................................................... 28 Appendix A: SAR Setup Photos ........................................................................................................ 28 Appendix B: SAR System Check Plots ............................................................................................... 28 Appendix C: SAR Highest Test Plots .................................................................................................. 28 Appendix D: SAR Tissue Ingredients .................................................................................................. 28 Appendix E: SAR Pro…

Text truncated - open the document above for the full version.

Test Report 2025-044 Version B Issued 22 July 2025 Project GCL-0801 Model Identifier: A04918 Primary Test Standard(s): CFR 47, FCC Part 15.225 RSS-210 Issue 11 Garmin Compliance Lab Garmin International 1200 E 151 st Street Olathe Kansas 66062 USA Client-supplied Information FCC ID: IPH-04918 IC ID: 1792A-04918 See section 6 of this report regarding the presence or absence of accreditation logos or marks on this cover page. Page 2 of 34 GCL Test Report 2025-044 Version B This report may be reproduced in whole. Reproduction of parts or excerpts requires lab management approval. Garmin 1. Summary The equipment or product described in section 5 of this report was tested at the Garmin Compliance Lab according to standards listed in section 6. This report focuses on the NFC transceiver(s). The results are as follows. Parameter Description Key Performance Values Result Data starts at page Radio Modulation Summary of the kinds of communication this radio can achieve, as stated by the client. [RSS-GEN at Annex A item 10b] Digitally modulated OOK and BPSK signaling at rates as high as 106 kbps. Reported N/A Transmitter intentional emissions Emissions while transmitting must be limited according to a mask that varies across the frequency range 13.110 to 14.010 MHz.[15.225(a) through (c), RSS-210 B.6] 19 dB of margin to the intentional emission limit. PASS 15 Transmitter spurious emissions Emissions beyond the intended radio band while transmitting must be suppressed a general limit. [FCC 15.225 (d) and RSS 210 B.6] 1.7 dB of margin to the Class B limit. PASS 23 Conducted Emissions AC Power Port Radio emissions that this device may generate via its ac power network connections that are not necessary for its operation and that may affect radio communication. [FCC Part 15.205 and RSS-GEN 8.8] 26 dB of margin to the appropriate limit. Tested 150 kHz to 30 MHz applying combined Class B limits. PASS 27 Frequency stability under extreme Conditions The ability for the radio to accurately maintain carrier frequency stable with changes in temperature and supply voltage. [FCC 15.225 (e) and RSS 210 B.6] The Carrier frequency was stable within 0.01% of the target frequency. PASS 30 Other Bandwidths Bandwidth values are presented for 99% Occupied Bandwidth There are requirements to report these numbers, but they do not have performance limits. Reported 32 NT (Not Tested) means the requirement may or may not be applicable, but the relevant measurement or test was not performed as part of this test project. N/A (Not Applicable) means the lab judged that the test sample is exempt from the requirement. Table 1: Summary of results Page 3 of 34 GCL Test Report 2025-044 Version B This report may be reproduced in whole. Reproduction of parts or excerpts requires lab management approval. Garmin Report Organization For convenience of the reader, this report is organized as follows: 1. Summary 2. Test Background 3. Report History and Approval 4. Test Sample Modifications and Special Conditions 5. Description of Equipment Tested 6. Test Standards Applied 7. Measurement Instrumentation Uncertainty 8. Selected Examples of Calculations 9. Environmental Conditions During Test 10. 3m RF Chamber Block Diagrams Annex: Test records are provided for each type of test, following the order and page numbering stated in the summary table. Concluding notes appear on the final page of this report. Due to confidentiality, certain material (such as test setup photographs) has been removed from this report and placed in GCL Test Report 2025-046. That report is treated as a part of this document by way of this reference. Page 4 of 34 GCL Test Report 2025-044 Version B This report may be reproduced in whole. Reproduction of parts or excerpts requires lab management approval. Garmin 2. Test Background 2.1 The Test Lab The testing reported here was performed at the Garmin Compliance Lab, an organization within Garmin International, located at 1200 E 151 st St, Olathe Kansas, USA. The contact telephone number is +1.913.397.8200. 2.2 The Client The testing was performed on behalf of the Garmin design group, a separate organization located at 1200 E 151 st St, Olathe Kansas, USA. Witnesses from the business group included: None. 2.3 Other Information Test Sample received: 15 Apr 2025 Test Start Date: 11 Jun 2025 Test End Date: 17 Jun 2025 The data in this test report apply only to the specific samples tested. Upon receipt all test samples were believed to be properly assembled and ready for testing. 3. Report History and Approval This report was written by Andy Heier and initially issued on 15 July 2025 as Version A. Version B, issued on 22 July 2025, removed “caveat” from page 2 summary table and removed “Immunity Performance Criteria” from page 4. Not applicable to this project. Corrected Occupied Bandwidth measurement RBW, replacing test ID TR54 with TR56 starting on page 32. Report Technical Review: _________________________________________ Andy Heier Senior EMC Engineer Report Approval: _________________________________________ Shruti Kohli Senior Manager Operations Page 5 of 34 GCL Test Report 2025-044 Version B This report may be reproduced in whole. Reproduction of parts or excerpts requires lab management approval. Garmin 4. Test Sample Modifications and Special Conditions The following special conditions or usage attributes were judged during test to be necessary to achieve compliance with one or more of the standards listed in section 6 of this report: None. The following modifications to the test sample(s) were made, and are judged necessary to achieve compliance with one or more of the standards listed in section 6 of this report: None. Page 6 of 34 GCL Test Report 2025-044 Version B This report may be reproduced in whole. Reproduction of parts or excerpts requires lab management approval. Garmin 5. Description of the Equipment Tested 5.1 Unique Identification Product Model A04918 Serial Numbers Tested 510606683, 510606682 The produc…

Text truncated - open the document above for the full version.

Antenna Data Sheet Antenna Manufacturer Information: The antenna(s) for Garmin Model A04918 is custom designed and manufactured by Garmin International, Inc. (Garmin) with headquarters located at 1200 E. 151 st Street, Olathe, KS, 66062, USA. Garmin is an antenna manufacturer that specializes in antenna construction and has been a technology leader in high performance antenna design for over thirty years. State-of-the art equipment is used as described below to design, measure, and analyze new designs that are superior to competitor designs and highly proprietary in nature. Equipment Description: This data sheet contains the antenna gain information for the antenna, A04918-A1 and A04918-A2 for Garmin Model A04918. The approximate operational frequency band of these technologies is given, and the maximum gain within the frequency band is reported. Reported Data: Antenna Model Number Type Antenna Maximum Gain @ Frequency Antenna Approximate Frequency Band A04918-A1 Slot -5.77 dBi @ 2480 MHz 2350 to 2530 MHz A04918-A2 loop N/A 13.56MHz Additional Information: As all measurements for Part 15.225 and RSS-210 Issue 11 B.6, are made in radiated mode to comply with the field strength limits, gain information is not required to be noted in the reports or any additional documentation. Proprietary information regarding antenna design, dimensions, cable length, etc. are provided in the Confidential Operation Description exhibit.