IPH-A4ATGB01Low Power Transmitter 2402-2480 MHz

All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product. Garmin ® and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used without the express permission of Garmin. BaseCamp™, dēzl™, Garmin Express™, HomePort™ , MapSource ® , myGarmin™ , ecoRoute™, myTrends™, trafficTrends™, nüMaps Guarantee™, and nüMaps Lifetime™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin. The Bluetooth ® word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such word mark or logo by Garmin is under license. Foursquare ® is a trademark of Foursquare Labs, Inc. in the U.S. and in other countries. microSD™ and the microSDHC logo are trademarks of SD-3C, LLC. Windows ® , Windows Vista ® , and Windows XP ® are registered trademarks of Microsoft Corporation in the United States and other countries. Mac ® is a trademark of Apple Inc. HD Radio™ and the HD logo are trademarks of iBiquity Digital Corporation. HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and foreign patents. DRAFT Navigating to Your Destination Routes A route is a path from your current location to a destination. A route may include multiple locations, or stops, on the way to the destination (Adding a Location to Your Route). The device calculates the route to your destination based on the preferences you select in the navigation settings, such as the route calculation mode (Changing the Route Calculation Mode) and avoidances (Avoiding Delays, Fees, and Areas). The device can also avoid ro ds that are not appropriate for the active vehicle profile ( ehicle Profiles) . Starting a Rou e 1 Sel ct Where To?. 2 elect Enter Search, enter a search term, and select Finding a Location Using the Search Bar). TIP ou can also search for locations using categories, searc tools, or other methods (Finding Locations). 3 Select a cation. 4 Select Go! . The device calculates a route to the location and guides you using voice prompts and information on the map (Your Route on the Map). If you need to stop at additional locations, you can add the locations to your route (Adding a Location to Your Route). You can also shape the route to adjust its course (Shaping Your Route). Going Home Select Where To? > Go Home . Editing Your Home Location Information 1 Select Where To? > Saved > Home. 2 Select . 3 Select > Edit. 4 Enter your changes. 5 Select Done. Your Route on the Map NOTICE The speed limit feature is for information only and does not replace your responsibility to abide by all posted speed limit signs and to use safe driving judgment at all times. Garmin will not be responsible for any traffic fines or citations you receive for failing to follow all applicable traffic laws and signs. As you travel, the device guides you to your destination using voice prompts and information on the map. 2Vehicle Profiles FT Instructions for your next turn or exit, or other action appear across the top of the map. The symbol À indicates the type of action and the lane or lanes in which you should be traveling, if available. The device also displays the distance to the next action Á and the name of the street or exit associated with that action  . A colored line à highlights the course of your route on the map Arrows on the map Ä indicate upcoming turns. When you approach your destination, a checkered flag indicates the location of your destination. Your vehicle speed Å , the road on which you are traveling Æ , and your estimated arrival time Ç appear at the bottom of the map. You can customize the arrival time data field to display other information (Changing the Map Data Field). A data field displaying the speed limit may appear as you trave on major roadways. This feature is not available in all areas. Active Lane Guidance As you approach a turn while navigating a route, a detailed simulation of the road appears beside the map, if available. A colored line indicates the proper lane for the turn. Viewing a List of Turns While navigating a route, you can view all of the turns and maneuvers for your entire route and the distance between turn 1 While navigating a route, select the text bar on the top of the map. 2 Select a turn. The details for the turn appear. If available n image the junction appears for junctions on major roadw ys. Viewing the Entire Route on the M p 1 While navigating a route, select anywhere on he ma 2 Select . Adding a Location to Your Route Before you can add a location to your route y must be navigating a route (Starting a Route) . You can navigate to additional locations on the way to your destination. For example, you can add a fuel station as the next stop in your route. You can also add a location to the end of your route. TIP: To create complex routes with multiple locations or scheduled stops, you can use the trip planner to plan, edit, and save your route (Planning a Trip). 1 From the map, select > Where To? . 2 Search for a location (Finding Locations) . 3 Select a location. 4 Select Go! . 5 Select an option: • To add the location as the next stop in your route, select Add as Next Stop . • To add the location to the end of your route, select Add as Last Stop. • To add the location and adjust the order of locations in your route, select Add to Active Route . Your device re-calculates the route to include the added location and guides you to the locations in order. Taking a Detour Befor you can take a detour, you must be navigating a route an you must add the …

Text truncated - open the document above for the full version.

Page 1 of 2 November 18, 2014 Timco Engineering Inc. 849 NW State Road 45 Newberry, FL 32669 Applicant: Garmin International, Inc. 1200 East 151st Street Olathe, KS 66062 Re: Confidentiality for submittal information regarding FCC ID number IPH-A4ATGB01 PRODUCT: Transmitter operated under 47CFR Section 15C Dear Sirs: Garmin International, Inc. requests that the material in the Schematics, Block Diagram, and Operational Description be withheld from public disclosure pursuant to Sections 0.457 and 0.459 of the Commission’s Rules following grant of the application. In support of this request, Garmin International, Inc. submits the following information. CONFIDENTIAL FILES Conf BlkDia A4ATGB01.pdf Conf OpDes A4ATGB01.pdf Conf Schem A4ATGB01.pdf 1. Identification of the specific information for which confidential treatment is sought: The materials set forth in the Operational Description, block diagram, parts list, and Schematics, which are segregated, from the non-confidential exhibits of the application, are those for which confidentiality is sought. 2. Identification of the Commission proceeding in which the information was submitted or a description of the circumstances giving rise to the submission: The proceeding is that involving the application for equipment authorization (certification) under FCC ID: IPH-A4ATGB01 3. Explanation of the degree to which the information is commercial or financial, or contains a trade secret or is privileged: This material includes a detailed theory of operation, circuit diagrams, and schematic. As such, this material is treated as highly confidential business information. ROGERS LABS, INC. 4405 West 259 th Terrace Louisburg, KS 66053 913 837-3214 Page 2 of 2 4. Explanation of the degree to which the information concerns a service that is subject to competition: The material for which confidentiality is sought is employed in the design and manufacture of this transmitting equipment that is offered on a highly competitive basis. Customers for this equipment have a variety of competing sources. 5. Explanation of how disclosure of the information could result in substantial competitive harm: Disclosure would, in effect, give away the fruits of the labors of Garmin International, Inc.’s engineering personnel, who have designed the equipment and the manufacturing process. Disclosure would also offer competitors additional unwarranted insight into the state of the product development, thereby allowing competitors an advantage, not available to Garmin International, Inc. 6. Identification of any measures taken by the submitting party to prevent unauthorized disclosure: The information for which confidential treatment is sought is kept confidential by Garmin International, Inc. and not made available to third parties except pursuant to non-disclosure agreements. 7. Identification of whether the information is available to the public and the extent of any previous disclosure of the information to third parties: To the knowledge of those preparing this application, the information has not been disclosed publicly heretofore. While the general theory of operation of this equipment has been the subject of numerous disclosures in industry and standards groups as well as in rule making proceedings of the FCC, the protection sought is narrowly drawn and pertains to certain specific implementations of this radio technology. 8. Justification of the period during which the submitting party asserts that the material should not be available for public disclosure: This material should not be disclosed for at least 25 years. While improvements in design are made relatively frequently, disclosure of the design information would lead to insights into both design and manufacturing techniques that could have an adverse competitive effect for many years to come. As such, it is important that the design not be made available to unauthorized persons who might attempt to use knowledge of the design to compromise the applications for which the equipment will be employed. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Sincerely, Scot Rogers

December 5, 2014 Timco Engineering Inc. 849 NW State Road 45 Newberry, FL 32669 Applicant: Garmin International, Inc. 1200 East 151st Street Olathe, KS 66062 Re: Short-term Confidentiality request for submittal information regarding FCC ID: IPH-A4ATGB01 FCC Rules: Parts 2 and 15C Dear Sirs: Garmin International, Inc. requests that the following information be withheld from public disclosure pursuant to CFR47 paragraphs 0.457 and 0.459, and KDB 726920 until 45 days after the Grant of Equipment Authorization. Disclosure of information would offer competitors additional unwarranted insight into the state of the product development. Short-term confidential files Exhibit File External Photos Short Term Conf ExtPho A4ATGB01.pdf Internal Photos Short Term Conf IntPho A4ATGB01.pdf Test Setup Photos Short Term Conf TSup A4ATGB01.pdf User Manual Short Term Conf UserMan A4ATGB01 1.pdf User Manual Short Term Conf UserMan A4ATGB01 2.pdf Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Sincerely, Scot Rogers ROGERS LABS, INC. 4405 West 259 th Terrace Louisburg, KS 66053 +1 913 837-3214

November 18, 2014 Timco Engineering Inc. 849 NW State Road 45 Newberry, FL 32669 Applicant: Garmin International, Inc. Equipment: FCC ID: IPH-A4ATGB01 1200 East 151st Street CORES number: 0005-0885-88 Olathe, KS 66062 FCC Rules: Parts 2 and 15C To Whom It May Concern: The form 731 and application have been electronically submitted and any attachments will be up loaded to your web site for use in obtaining a grant of certification. Confidentiality is requested as outlined below. Permanent Garmin International, Inc. requests that the material in the Schematics, Block Diagram, and Operational Description be withheld from public disclosure pursuant to Sections 0.457 and 0.459 of the Commission’s Rules following grant of the application. A statement of confidentiality will be attached with the application at the time of submittal. Exhibit File Schematics Conf Schem A4ATGB01.pdf Block diagram Conf BlkDia A4ATGB01.pdf Operational Description Conf OpDes A4ATGB01.pdf Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Sincerely, Scot Rogers Rogers Labs, Inc. Enclosures ROGERS LABS, INC. 4405 West 259 th Terrace Louisburg, KS 66053 Phone / Fax (913) 837-3214

Rogers Labs, Inc. Garmin International, Inc. SN: 3YD000058 4405 W. 259th Terrace Model: A4ATGB01 FCC ID#: IPH-A4ATGB01 Louisburg, KS 66053 Test #: 140926 IC: 1792A-A4ATGB01 Phone/Fax: (913) 837-3214 Test to: CFR47 (15.249), RSS-210 Date: November 19, 2014 Revision 1 File: Short Term Conf ExtPho A4ATGB01 Page 1 of 3 External photographs of equipment under test Rogers Labs, Inc. Garmin International, Inc. SN: 3YD000058 4405 W. 259th Terrace Model: A4ATGB01 FCC ID#: IPH-A4ATGB01 Louisburg, KS 66053 Test #: 140926 IC: 1792A-A4ATGB01 Phone/Fax: (913) 837-3214 Test to: CFR47 (15.249), RSS-210 Date: November 19, 2014 Revision 1 File: Short Term Conf ExtPho A4ATGB01 Page 2 of 3 Rogers Labs, Inc. Garmin International, Inc. SN: 3YD000058 4405 W. 259th Terrace Model: A4ATGB01 FCC ID#: IPH-A4ATGB01 Louisburg, KS 66053 Test #: 140926 IC: 1792A-A4ATGB01 Phone/Fax: (913) 837-3214 Test to: CFR47 (15.249), RSS-210 Date: November 19, 2014 Revision 1 File: Short Term Conf ExtPho A4ATGB01 Page 3 of 3

Label Drawing (Dimensions in mm) Note: All text is minimum 4 point font or larger Label Placement Label Device Back of device

NVLAP Lab Code 200087-0 Rogers Labs, Inc. Garmin International, Inc. SN: 3YD000058 4405 W. 259th Terrace Model: A4ATGB01 FCC ID#: IPH-A4ATGB01 Louisburg, KS 66053 Test #: 140926 IC: 1792A-A4ATGB01 Phone/Fax: (913) 837-3214 Test to: CFR47 (15.249), RSS-210 Date: October 13, 2014 Revision 1 File: Garmin A4ATGB01 DXX TstRpt 140926 Page 1 of 32 Application For Grant of Certification FOR FOR Model: A4ATGB01 2402-2480 MHz Low Power Transmitter FCC ID: IPH-A4ATGB01 IC: 1792A-A4ATGB01 FOR Garmin International, Inc. 1200 East 151st Street Olathe, KS 66062 Test Report Number: 140926 IC Test Site Registration: 3041A-1 Authorized Signatory: Scot D. Rogers NVLAP Lab Code 200087-0 Rogers Labs, Inc. Garmin International, Inc. SN: 3YD000058 4405 W. 259th Terrace Model: A4ATGB01 FCC ID#: IPH-A4ATGB01 Louisburg, KS 66053 Test #: 140926 IC: 1792A-A4ATGB01 Phone/Fax: (913) 837-3214 Test to: CFR47 (15.249), RSS-210 Date: October 13, 2014 Revision 1 File: Garmin A4ATGB01 DXX TstRpt 140926 Page 2 of 32 Engineering Test Report For Grant of Certification Application FOR CFR 47, PART 15C - Intentional Radiators CFR 47 Paragraph 15.249 and Industry Canada RSS-210 License Exempt Intentional Radiator For Garmin International, Inc. 1200 East 151st Street Olathe, KS 66062 Model: A4ATGB01 Low Power Transmitter Frequency Range 2402-2480 MHz FCC ID#: IPH-A4ATGB01 IC: 1792A-A4ATGB01 Test Date: September 26, 2014 Certifying Engineer: Scot D. Rogers Rogers Labs, Inc. 4405 West 259 th Terrace Louisburg, KS 66053 Telephone/Facsimile: (913) 837-3214 This report shall not be reproduced except in full, without the written approval of the laboratory. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. ROGERS LABS, INC. 4405 West 259 th Terrace Louisburg, KS 66053 Phone / Fax (913) 837-3214 NVLAP Lab Code 200087-0 Rogers Labs, Inc. Garmin International, Inc. SN: 3YD000058 4405 W. 259th Terrace Model: A4ATGB01 FCC ID#: IPH-A4ATGB01 Louisburg, KS 66053 Test #: 140926 IC: 1792A-A4ATGB01 Phone/Fax: (913) 837-3214 Test to: CFR47 (15.249), RSS-210 Date: October 13, 2014 Revision 1 File: Garmin A4ATGB01 DXX TstRpt 140926 Page 3 of 32 Table Of Contents TABLE OF CONTENTS .................................................................................................. 3 REVISIONS ..................................................................................................................... 4 FORWARD ..................................................................................................................... 5 OPINION / INTERPRETATION OF RESULTS ............................................................... 5 EQUIPMENT TESTED .................................................................................................... 5 EQUIPMENT FUNCTION AND CONFIGURATION........................................................ 5 Equipment Configuration.................................................................................................................................... 7 APPLICATION FOR CERTIFICATION ........................................................................... 8 APPLICABLE STANDARDS & TEST PROCEDURES .................................................. 9 EQUIPMENT TESTING PROCEDURES ........................................................................ 9 AC Line Conducted Emission Test Procedure .................................................................................................. 9 Radiated Emission Test Procedure ..................................................................................................................... 9 Diagram 1 Test arrangement for Conducted emissions ..................................................................................... 10 Diagram 2 Test arrangement for radiated emissions of tabletop equipment ...................................................... 11 Diagram 3 Test arrangement for radiated emissions tested on Open Area Test Site (OATS) ........................... 12 TEST SITE LOCATIONS .............................................................................................. 12 LIST OF TEST EQUIPMENT ........................................................................................ 13 UNITS OF MEASUREMENTS ...................................................................................... 14 ENVIRONMENTAL CONDITIONS................................................................................ 14 INTENTIONAL RADIATORS ........................................................................................ 14 Antenna Requirements ...................................................................................................................................... 14 Restricted Bands of Operation .......................................................................................................................... 14 Table 1 Harmonic Radiated Emissions in Restricted Bands Data ..................................................................... 15 Summary of Results for Radiated Emissions in Restricted Bands ................................................................ 15 AC Line Conducted EMI Procedure ................................................................................................................ 16 Figure 1 AC Line Conducted emissions of EUT line 1 (EUT AC Adapter) ..................................................... 17 NVLAP Lab Code 200087-0 Rogers Labs, Inc. Garmin International, Inc. SN: 3YD000058 4405 W. 259th Terrace Model: A4ATGB01 FCC ID#: IPH-A4ATGB01 Louisburg, KS 66053 Test #: 140926 IC: 1792A-A4ATGB01 Phone/Fax: (913) 837-3214 Test to: CFR47 (15.249), RSS-210 Date: October 13, 2014 Revision 1 File: Garmin A4ATGB01 DXX TstRpt 140926 Page 4 of 32 Figure 2 AC Line Conducted emissions of EUT line 2 (EUT AC Adapter) ..................................................... 17 Figure 3 AC Line Conducted em…

Text truncated - open the document above for the full version.