IPH-GRMNAIS600Marine Transceiver

Use these instructions to program and install the Garmin ® AIS 600 marine Automatic Identification System (AIS) Class B transponder device. Compare the contents of this package with the packing list on the box. If any pieces are missing, contact your Garmin dealer immediately.  WARNING When navigating, carefully compare information provided by the unit to all available navigation sources, including information from visual sightings, local waterway rules and restrictions, and maps. For safety, always resolve any discrepancies or questions before continuing navigation. Use this unit only as a navigational aid. Do not attempt to use the unit for any purpose requiring precise measurement of direction, distance, location, or topography. This product, its packaging, and its components contain chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. This Notice is provided in accordance with California’s Proposition 65. See www.garmin.com/prop65 for more information.  CAutIoN Wear safety goggles and a dust mask when drilling, cutting, or sanding. Notice To prevent possible damage to your equipment, the VHF antenna must be connected to the AIS 600 before transmitting. This ensures that the power output to the antenna port dissipates properly when transmitting. Electromagnetic Energy Exposure and Antenna Mounting The AIS 600 generates and radiates radio frequency (RF) electromagnetic energy (EME). Failure to observe these guidelines may expose persons to RF radiation absorption exceeding the maximum permissible exposure (MPE). Garmin declares an MPE radius of 59 in. (1.5 m.) for this system, which was determined using 2 watts output to an omni-directional 9 dBi gain antenna. The antenna should be installed such that a distance of 59 in. (1.5 m) is maintained between the antenna and all persons. When sharing the VHF antenna with a VHF radio, refer to the documentation provided with the radio for additional MPE information specific to the installed VHF radio.  WARNING: Radio operators with cardiac pacemakers, life-support machines, or electrical medical equipment should not be exposed to excessive radio- frequency fields. Operate the device in accordance with the instructions supplied. Notice The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. Check with the local authorities for any antenna or operational restrictions that may apply. Safe Compass Distance Ensure that you install the AIS 600 transceiver box at least 15 3 / 4 in. (40 cm) from any compass. Test your compass to verify that it operates correctly when the device is operating. Licensing Requirements In many countries, the operation of an AIS device is included in the VHF license provisions. Therefore, the vessel on which the AIS 600 is installed must possess a current VHF license that lists the AIS system, the vessel Call Sign, and the vessel MMSI number. Contact the relevant authority in your country to ensure that your VHF license covers the AIS 600 device. AIS 600 Instructions December 2009 190-01151-00 Rev. B Printed in Germany  AIS 600 Instructions Programming the AIS 600 Before the AIS 600 can be used on a boat, it must be programmed with a unique MMSI number and with additional vessel-specific static data. The AIS 600 should be programmed by an authorized marine-electronics dealer or installer. Use the AIS 600 Setup Software on the included CD-ROM to program the AIS 600. Notice In the USA, it is prohibited under FCC regulations to enter incorrect or improper data, and it is prohibited for any person other than the manufacturer or the installing dealer to input Maritime Mobile Service Identity (MMSI) data. It is a violation of the rules of the Federal Communications Commission to input an MMSI that has not been properly assigned to the user, or to otherwise input any inaccurate data in this device. Preparing the AIS 600 and the PC for Programming PC Requirements Microsoft ® Windows ® 2000 or newer; minimum 32 MB of RAM; minimum 10 MB of free hard drive space. to connect the AIS 600 to a PC for programming: 1. Connect the AIS 600 transceiver box to a 12 or 24 Vdc power source using the power/data cable (see page 5). 2. Use the included mini USB cable to connect the USB port on the AIS 600 transceiver box to a USB port on your computer. The Windows Found New Hardware Wizard runs automatically. 3. Follow the on-screen instructions to install the driver automatically. Installing the AIS 600 Setup Software: 1. Insert the CD-ROM provided with the AIS 600 into your computer. The Installation Wizard for the AIS 600 Setup Software runs automatically. NotE: To run the AIS 600 programming Setup Software installer manually, run the Setup.exe file on the CD-ROM. 2. Follow the on-screen instructions to install the AIS 600 Setup Software on your computer. Assigning Data to the AIS 600 The AIS 600 must be programmed with a valid vessel MMSI number before use. Until a valid MMSI number is programmed, the AIS 600 will operate in silent mode only. When in silent mode, the AIS 600 will not transmit position data, though it can still receive AIS signals. Optionally, the AIS 600 will transmit the following static vessel data when assigned: Vessel name Vessel call sign Vessel type Vessel dimensions (including the location of the GPS antenna on the boat) to begin communication with the AIS 600: 1. Ensure that the AIS 600 transceiver box is connected to a 12 or 24 Vdc power source using the power/data cable, and that it is connected to the PC using the included mini USB cable. 2. Launch the AIS 600 Setup Software. An icon was placed on the desktop when you installed the software. 3. Click Connect in the Connection and Status window. to assign an MMSI number to the AIS 600: NotE: After you save the assigned MMSI number to the AIS 600, the MMSI number cannot be changed. 1. On the Static Data tab of the AIS 600 Setup Software, enter a ni…

Text truncated - open the document above for the full version.

• Garmln International, Inc 1200 ~.l'1 151s1 SHeet at 'h. n~a~ 66062 GA MIN p·913·397·8200 F 913-397 8.282 January 7. 2009 TUEV-Sued Senton GmbH Aeussere Fruehlingstr. 45, 94315 Straubing Germany Dear Sir or Madam, Garmin International Inc., authorizes Mr. Johann Roidt from TUEV-Sued Senton GmbH, Aeussere Fruehlingstr. 45, 94315 Straubing, Germany to act as Garmin's agent for the sole purpose of making application to relevant spectrum agencies to secure the certification or approval of the Garmin AIS600 product at international locations defined in separate documentation. This authorization is not transferable and includes signing the application on behalf of Garmin. The AIS600 is maritime ship borne Class B transponder system that provides Automatic Identification System functionality compliant with specification IEC 62287-1. This authorization expires on 23 rd of December 2010. Sincerely, Van Ruggles Director, Quality Assurance and Certification Garmin International Inc., 1200 East 151 st Street Olathe, KS 66062 913-397-8200 FRN: 0005088588

Request for Confidentiality PHOENIX TESTLAB GmbH Date: 09 December 2009 Product Certification Königswinkel 10 D 32825 Blomberg RE: Certification Application FCC ID: IPH-GRMNAIS600 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rule, the applicant hereby requests confidential treatment of information accompanying this application as outlined below: • Schematics • Block Diagram • Technical Description • Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457, disclosure od this application and all accompanying documentation will not be made before the date of the GRANT for this application ́. Thank you for your attention in this matter. Applicant’s Company : TÜV SÜD SENTON GmbH address : Auessere Fruehlingstrasse 45, D-94315 Straubing Signature : Johann Roidt Job Title and Dept. : Technical Director

FCC ID IPH-GRMNAIS600 FCC ID IPH-GRMNAIS600 FCC ID IPH-GRMNAIS600 FCC ID IPH-GRMNAIS600 FCC ID IPH-GRMNAIS600 FCC ID IPH-GRMNAIS600 FCC ID IPH-GRMNAIS600 FCC ID IPH-GRMNAIS600 FCC ID IPH-GRMNAIS600 FCC ID IPH-GRMNAIS600 FCC ID IPH-GRMNAIS600

FCC ID IPH-GRMNAIS600 170.40 REV DESCRIPTION ECO No. DATE TITLE SIZE SCALE DWG. NO. REV. SHT.OF DATE DRWN. CHKD. APPR. PROJ. TOLERANCE .XX ±.010 .XXX ±.005 HOLES ±.003 ANGLES +/- 0.5° UNLESS NOTED OTHERWISE REVISIONS ENGLISH UNITS METRIC UNITS .X ±.25 .XX ±.13 HOLES ±.08 MGR. B RNL RDS TLC JKF 10/5/09 10/5/09 10/6/09 10/7/09 NONE 1 1 B 161-02402-00 TAG, S/N, AIS 600 ----- 1 A B EXPERIMENTAL RELEASE PRODUCTION RELEASE UPDATE PER USCG REQUIREMENTS 10/5/09 11/13/09 1/6/10 66902 68223 c/o Garmin International, Inc. Garmin Ltd. or its subsidiaries 1200 E. 151st Street Olathe, Kansas 66062 U.S.A. CONFIDENTIAL This drawing and the specifications contained herein are the property of Garmin Ltd. or its subsidiaries and may not be reproduced or used in whole or in part as the basis for manufacture or sale of products without written permission. NOTES: 3. MAIN TAG AND ADDITIONAL TAG ARE SUPPLIED ON ONE ROLL WITH EQUIVALENT SERIAL NO.S ADJACENT TO EACH OTHER. ALL TAGS ARE "KISS CUT" ON ROLL. 4. PARTS TO BE FABRICATED USING DIGITAL CORELDRAW FILE. 2. 9 DIGIT SERIAL NUMBER TO BE PRINTED SEQUENTIALLY IN WHITE FIELD AS SHOWN (BARCODE 39 WITH HUMAN READABLE CODE WHEN APPLICABLE). ALSO PRINT ADDITIONAL TAGS (30 X 7.5) IN QTY INDICATED (BARCODE 39 WITH HUMAN READABLE ONLY). ALL TAGS PRINTED WITH INDELIBLE BLACK INK. SERIAL NUMBER RANGE FOR THIS ITEM: 1SS000000-1SS999999 AS INDICATED ON GARMIN PURCHASE ORDER. SCALE: 1X 1SS000000 29.40 These areas to be transparent 1. MATERIAL: TAG #1 - TRANSPARENT LEXAN, SECOND SURFACE PRINTED. BACKGROUND IS BLACK WITH WHITE COPY. HIGH TEMP ACRYLIC PERMANENT ADHESIVE ON BACK SIDE WITH PEEL OFF RELEASE LINER. TOTAL PACKAGE THICKNESS EXCLUDING RELEASE LINER IS .14-.22mm. Made in Germany FCC ID: IPH-GRMNAIS600 IC: 1792A-GRMNAIS600B BSH/46162/4321409/09 N20233 0700 0 NM EA 2 0 0 GPS ANT SRM USB Model: AIS 600 S/N: All OK RX TX RX Only Warning SRM Error VHF TX 1SS000000 Input: 9.6-31.2 VDC 20W max. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two (2) conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received including interference that may cause undesired operation. Garmin International Inc., 1200 E. 151st Street, Olathe, KS 66062 Compass Safe Distance = 40cm SHIPBOURNE AUTOMATIC IDENTIFICATION SYSTEM (AIS) CLASS B USCG: 165.156/10/0 N E A M 2000 ® LEN=2

FCC ID IPH-GRMNAIS600 FCC ID IPH-GRMNAIS600 FCC ID IPH-GRMNAIS600 FCC ID IPH-GRMNAIS600 FCC ID IPH-GRMNAIS600 FCC ID IPH-GRMNAIS600

Test Equipment List with Calibration Data Seite 1 von 2 Test report number(s): Date of test: 70464-00843-2 09-2009/12-2009 Date of Calibration Type Inv.-No. Type Designation Serial Number Manufacturer Calibration Organization Last Next Test receiver 1028 ESHS10 860043/016 Rohde & Schwarz Rohde & Schwarz 02/2009 08/2010 EMI Test receiver 1569 ESMI 839379/013 Rohde & Schwarz Rohde & Schwarz 09/2009 12/2011 EMI test receiver 1711 ESPI7 836914/0002 Rohde & Schwarz Rohde & Schwarz 09/2009 03/2011 EMI test receiver 1863 ESCI 100008 Rohde & Schwarz Rohde & Schwarz 06/2008 06/2010 EMI test receiver 2010 ESPI7 101018 Rohde & Schwarz Rohde & Schwarz 03/2008 03/2010 Test receiver 2031 ESVP 891846/003 Rohde & Schwarz Rohde & Schwarz 10/2008 04/2010 Preamplifier 1142 R14601 13120026 Advantest TÜV SÜD SENTON 04/2008 04/2010 Preamplifier 1651 CPA9231A 3393 Schaffner Electrotest TÜV SÜD SENTON 05/2008 11/2009 V-network 1059 ESH3-Z5 894785/005 Rohde & Schwarz Rohde & Schwarz 05/2009 05/2012 V-network 1060 ESH3-Z5 862770/021 Rohde & Schwarz Rohde & Schwarz 01/2007 01/2010 V-network 1218 ESH3-Z5 830952/025 Rohde & Schwarz Rohde & Schwarz 07/2008 07/2011 Loop antenna 1016 HFH2-Z2 882964/0001 Rohde & Schwarz Rohde & Schwarz 09/2009 03/2011 Double ridged waveguide horn antenna 1516 3115 9508-4553 EMCO Elektronik ARC 05/2008 05/2011 Biconical Antenna 1518 HK116 842204/01 Rohde & Schwarz Rohde & Schwarz 06/2008 12/2009 Logarithmic-periodic antenna 1519 HL223 841516/23 Rohde & Schwarz Rohde & Schwarz 06/2008 12/2009 TRILOG broadband antenna 1722 VULB 9163 9163-188 Schwarzbeck Schwarzbeck 04/2008 01/2010 Note: Date of next calibration contains maximum tolerance if applicable. Test Equipment List with Calibration Data Seite 2 von 2 Test report number(s): Date of test: 70464-00843-2 09-2009/12-2009 Date of Calibration Type Inv.-No. Type Designation Serial Number Manufacturer Calibration Organization Last Next Multimeter 1653 21 III 76530546 Fluke ZMK 05/2008 02/2011 Multimeter 1654 21 III 76381229 Fluke ZMK 03/2008 12/2010 Multimeter 1975 Fluke 77 III 92370108 Fluke ZMK 09/2008 06/2011 Multimeter 1976 Fluke 77 IV 93090238 Fluke ZMK 09/2008 06/2011 Digital multimeter 2025 Fluke 177 96720024 Fluke ZMK 09/2008 06/2011 Digital multimeter 2026 Fluke 177 96720025 Fluke ZMK 09/2008 06/2011 EMI test receiver 2044 ESU 100232 Rohde & Schwarz Rohde & Schwarz 05/2009 11/2010 Power meter 1264 NRVS 836856/015 Rohde & Schwarz Rohde & Schwarz 05/2008 05/2011 Radio communication monitor 1531 CMS 54 838384/030 Rohde & Schwarz Rohde & Schwarz 06/2008 12/2009 Signal generator 2027 SMB 100A 100112 Rohde & Schwarz Rohde & Schwarz 08/2008 08/2011 Note: Date of next calibration contains maximum tolerance if applicable.

Prüfbericht Nr. / Test Report No. 70464-00843-2 (Edition 5) Seite / Page 1 von / of 88 Prüfbericht / Test Report Nr. / No. 70464-00843-2 (Edition 5) Auftraggeber Applicant Assdev GmbH Geräteart Type of equipment AIS600 Typenbezeichnung Type designation Class B AIS Transceiver Auftragsnummer / Order No. Prüfgrundlage Test standards IEC 62287-1 Edition 1 Final Draft, Clause 11 FCC Code of Federal Regulations, CFR 47, Part 80, Section 80.281 Industry Canada Radio Standard Specification RSS-182 Issue 4, Section 6 January 8, 2010 TÜV SÜD SENTON GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 Web: www.tuev-sued.com/senton eMail: [email protected] Test Report No. 70464-00843-2 (Edition 5) Page 2 of 88 Summary Prüfergebnisse / Test Results Auftragsnummer / Order No. Die Prüfungen wurden nach folgenden Vorschriften durchgeführt: Tests were performed according to: IEC 62287-1 Edition 1 Final Draft, Clause 11 CFR 47 Part 80.231 IC RSS-182 Issue 4, Section 4 Durchgeführte Prüfung Test performed Prüfergebnis Test result Erfüllt Passed Nicht erfüllt Not Passed Nicht zutreffend Not applicable Kriterium Criterion Transmitter: Frequency error Transmitter: Carrier power Transmitter: Transmission spectrum Transmitter: Modulation accurarcy Transmitter output power versus time function Receiver: Sensitivity Receiver: Error behaviour at high input levels Receiver: Co-channel rejection Receiver: Adjacent channel selectivity Receiver: Spurious response rejection Receiver: Intermodulation response rejection Receiver: Blocking or desensitisation Spurious emissions for the receiver Radiated Spurious emissions for the receiver Spurious emissions for the transmitter Bemerkungen / Remarks: According to CFR 47 Part 80.231 Class B Automatic Identification System (AIS) equipment must meet the technical requirements of the International Electrotechnical Commission (IEC) 62280-1. Die Prüfergebnisse beziehen sich ausschließlich auf das zur Prüfung vorgestellte Prüfmuster. Ohne schriftliche Genehmigung des Prüflabors darf der Prüfbericht auszugsweise nicht vervielfältigt werden. The test results relate only to the individual item which has been tested. Without the written approval of the test laboratory this report may not be reproduced in extracts. Datum / Date Geprüft von / Tested by Freigabe durch / Checked by Prüfergebnis / Test Result Erfüllt / Passed Nicht erfüllt / Not passed 2010-01-08 Martin Steindl Responsible for testing Johann Roidt Laboratory manager TÜV SÜD SENTON GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 Web: www.tuev-sued.com/senton eMail: [email protected] Test Report No. 70464-00843-2 (Edition 5) Page 3 of 88 Table of Contents 1 Administrative Data ................................................................................................................... 4 2 Details about the Test Laboratory ............................................................................................. 5 3 Description of the Equipment Under Test .................................................................................. 6 4 Operation Mode and Configuration of EUT ............................................................................... 7 5 Performance Criteria and Methods of Observation .................................................................... 9 6 Referenced Regulations .......................................................................................................... 10 7 Measurement Uncertainty Values ............................................................................................ 11 8 Test Results Overview............................................................................................................. 14 8.1 Requirements according to IEC 62287-1 .......................................................................... 14 8.2 Requirements according to RSS-182 ............................................................................... 15 9 Test Results ............................................................................................................................ 16 9.1 Frequency Error ............................................................................................................... 16 9.2 Carrier Power ................................................................................................................... 20 9.3 Transmission Spectrum .................................................................................................... 24 9.4 Modulation Accuracy ........................................................................................................ 29 9.5 Transmitter Output Power Versus Time Function ............................................................. 39 9.6 Sensitivity ......................................................................................................................... 43 9.7 Error Behaviour At High Input Levels ................................................................................ 47 9.8 Co-Channel Rejection ...................................................................................................... 51 9.9 Adjacent Channel Selectivity ............................................................................................ 55 9.10 Spurious Response Rejection .......................................................................................... 59 9.11 Intermodulation Response Rejection ................................................................................ 63 9.12 Blocking Or Desensitisation .............................................................................................. 67 9.13 Spurious Emissions For Receiver ..................................................................................... 71 9.14 Radiated Spurious Emissions For Receiver ...................................................................... 76 9…

Text truncated - open the document above for the full version.

TÜV SÜD SENTON GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 Web: www.tuev-sued.com/senton eMail: [email protected] Test Report No. 70464-01207-1 (Edition 3) Page 14 of 24 Pages Test setup for radiated emission measurement (fully anechoic room) TÜV SÜD SENTON GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 Web: www.tuev-sued.com/senton eMail: [email protected] Test Report No. 70464-01207-1 (Edition 3) Page 15 of 24 Pages Test setup for radiated emission measurement (open field test site) TÜV SÜD SENTON GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 Web: www.tuev-sued.com/senton eMail: [email protected] Test Report No. 70464-01207-1 (Edition 3) Page 16 of 24 Pages Test setup for radiated emission measurement (open field test site) - continued -