
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
NCR Orderman7 NCR Orderman7+ NCR Orderman7 MSR NCR Orderman7 SC FCC-ID JEH-7777-01XX JEH-7777-01YY IC-ID 470B-777701XX 470B-777701YY Orderman Orderman Orderman 1 2 3 CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. ATTENTION: RISQUE D’EXPLOSION SI LA BATTERIE REMPLACEE PAR UN TYPE INCORRECT. For NCR Orderman7 SC only: NCR Orderman7, NCR Orderman7+, NCR Orderman7 MSR, NCR Orderman7 SC NCR © 2014 All rights reserved 497-0506654 REV A Orderman GmbH (Part of NCR Corporation) Bachstraße 59 • A-5023 Salzburg • Austria • www.orderman.com LASER LIGHT, DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT 1,0 mW MAX OUTPUT: 650Nm IEC 60825-1 Ed2 (2007) Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. LUMIERE LASER, NE PAS REGARDER DANS LE FAISCEAU CLASSE 2 LASER PRODUIT 1,0 mW MAX OUTPUT: 650Nm IEC 60825-1 Ed2 (2007) Conforme à 21 CFR1040.10 et 1040.11, sauf pour les écarts suivant l’Avis laser 50, 24 juin 2007. NCR Orderman7, NCR Orderman7+, NCR Orderman7 MSR, NCR Orderman7 SC NCR © 2014 All rights reserved 497-0506654 REV A Orderman GmbH (Part of NCR Corporation) Bachstraße 59 • A-5023 Salzburg • Austria • www.orderman.com Deutsch NCR Orderman7 Benutzerhinweise: Lesen Sie die Benutzerhinweise bevor Sie das Gerät verwenden. Um die Gebrauchs- anleitung herunterzuladen besuchen Sie die Webseite: www.orderman.com/downloads Sicherheit und Handhabung: Siehe „Sicherheitshinweise“ in der Gebrauchsanleitung bevor Sie das Gerät verwenden. Regulatorische Hinweise: Regulatorische Informationen, Zertifizierung und Prüfzeichen finden Sie im Benutzer- handbuch unter „Regulatorische Hinweise“. Wichtig: Dieses Gerät ist mit den EMC Richtlinien konform und wurde mit kompatiblen Peripheriegeräten und abgeschirmten Kabeln für die Verbindung zwischen System- komponenten getestet. Achten Sie unbedingt darauf, ausschließlich abgeschirmte Kabel für die Verbindung zwischen Systemkomponenten zu verwenden, um mögliche Interferenzen mit Radios, Fernsehgeräten oder anderen elektronischen Geräten zu vermeiden. EU-Konformitätserklärung: Hiermit erklärt Orderman GmbH, dass sich dieses drahtlose Gerät in Übereinstim- mung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der R&TTE –Richtlinie befindet. Eine Kopie der EU-Konformitätserklärung ist online verfügbar unter: www.orderman.com/downloads NCR Orderman7, NCR Orderman7+, NCR Orderman7 MSR, NCR Orderman7 SC NCR © 2014 All rights reserved 497-0506654 REV A Orderman GmbH (Part of NCR Corporation) Bachstraße 59 • A-5023 Salzburg • Austria • www.orderman.com English NCR Orderman7 user information: Before using read user instructions for the device. To download the user information visit the webseite: www.orderman.com/downloads Safety and handling: See “Safety Instructions” in the user manual before using the device. Regulatory information: For regulatory information, certification and certification marks please refer to the manual titled “Regulary Information”. Important: This device complies with the EMC directive and has been tested with compatible peripheral devices and shielded cables for connection between system components. Please make sure to use only shielded cables to connect between system compo- nents to avoid possible interference with radios, televisions and other electronic devices. EU declaration of conformity: Hereby Orderman GmbH declares that this wireless device is in compliance with the essential requirements and other relevant provisions of the R&TTE directive. A copy of the EU declaration of conformity is available online at: www.orderman.com/downloads USA/Canada For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device is restricted to indoor use. Canadian Compliance statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3 (B)/NMB-3(B) IC Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NCR Orderman7, NCR Orderman7+, NCR Orderman7 MSR, NCR Orderman7 SC NCR © 2014 All rights reserved 497-0506654 REV A Orderman GmbH (Part of NCR Corporation) Bachstraße 59 • A-5023 Salzburg • Austria • www.orderman.com English This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Con…
Text truncated - open the document above for the full version.
NCR ©2014 All rights reserved. User Manual NCR Orderman7 Version 01.02 NCR Orderman7 General information Orderman GmbH 2 V 01.02 © 2014 by Orderman GmbH Bachstrasse 59 5023 Salzburg – Austria www.orderman.com We accept no liability for errors or misprints. Copying, even excerpts hereof, is prohibited without the written consent of Orderman GmbH. User Manual NCR Orderman7 Published November 2014 Version 01.02 Orderman accepts no responsibility for any damage or losses that arise from the use of this manual. Orderman accepts no responsibility for any losses or claims by third parties that arise through the use of Orderman devices. The contents of this guide are subject to change without prior notice. This guide does not constitute part of a contract. Trademark: All brand and product names are trademarks or registered trademarks of their corresponding companies. Note: For further questions about operating the device, contact your Orderman partner. NCR Orderman7 General information Orderman GmbH 3 V 01.02 Contents 1 General information ......................................................................................................... 5 1.1 Warranty _________________________________________________________________________ 5 1.2 Labeling __________________________________________________________________________ 5 1.2.1 Labeling on the unit 5 1.2.2 Serial number 6 1.3 Safety notices _____________________________________________________________________ 8 1.3.1 Explanation of symbols 8 1.3.2 General information 9 1.3.3 Safety information for battery pack 9 1.3.4 Safety information for barcode reader (laser) 9 2 NCR Orderman7 handhelds ........................................................................................... 11 2.1 Overview ________________________________________________________________________ 11 2.2 NCR Orderman7 handheld features __________________________________________________ 12 3 NCR Orderman7 ............................................................................................................. 13 3.1 Product description _______________________________________________________________ 13 3.2 Overview ________________________________________________________________________ 13 4 NCR Orderman7 + ............................................................................................................ 15 4.1 Product description _______________________________________________________________ 15 4.2 Overview ________________________________________________________________________ 15 5 NCR Orderman7 MSR ........................................................................................................ 17 5.1 Product description _______________________________________________________________ 17 5.2 Overview ________________________________________________________________________ 17 6 NCR Orderman7 SC .......................................................................................................... 19 6.1 Product description _______________________________________________________________ 19 6.2 Overview ________________________________________________________________________ 20 7 Service station and multi service station ..................................................................... 22 7.1 Overview of the service station _____________________________________________________ 22 7.2 Starting up the service station ______________________________________________________ 23 7.3 Overview of the multi service station _________________________________________________ 25 7.4 Starting up the multi service station _________________________________________________ 26 8 Remove/replace battery pack ........................................................................................ 27 9 Safety Cord ..................................................................................................................... 28 10 Operating the service station and multi service station .............................................. 29 10.1 Charging in the service station and multi service station ________________________________ 29 10.1.1 Charging the handheld 30 10.1.2 Charging the battery pack without handheld 31 NCR Orderman7 General information Orderman GmbH 4 V 01.02 10.2 Charging status LED for service station ______________________________________________ 31 10.3 Network Status LED for service station _______________________________________________ 32 10.4 Power LED for service station ______________________________________________________ 32 11 Operation ........................................................................................................................ 33 11.1 Operating conditions of the handhelds _______________________________________________ 33 11.1.1 Handheld On/Off 33 11.1.2 Standby 33 11.2 Acceleration sensor _______________________________________________________________ 33 11.2.1 Flip-View 33 11.2.2 Sleep mode 33 11.3 Status bar _______________________________________________________________________ 34 11.4 Configuration menu _______________________________________________________________ 34 11.5 Configure handheld _______________________________________________________________ 34 11.5.1 Display settings 35 11.5.2 Connecting the belt printer (Bluetooth pairing) 36 11.5.3 Miscellaneous 37 11.6 Use the magnetic strip reader _______________________________________________________ 38 11.7 Use the barcode reader ____________________________________________________________ 39 12 Testing the unit .............................................................................................................. 40 12.1 Ordercard test ____________________________________________________________________ 40 12.2 ISO/NFC test _____________________________________________________________________ 41 12.3 Barcode test (imager) _____________________________________________________________ 42 13 Accessories .............................................…
Text truncated - open the document above for the full version.
Date: 2014/12/10 Federal Communications Commission 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCC ID: JEH-7777-01XX Product name: 7777-01XX To whom it may concern: We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization of model 7777-01XX to the FCC Rules and Regulations. Sporton International Inc. Address : No. 52, Hwa Ya 1st Road., Kwei-Shan Hsiang, TaoYuan Hsien Taiwan R.O.C. Name : Kevin Liang Job Title : Vice Manager e-mail : [email protected] We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 835(a). This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Applicant : NCR Corporation Address : 2651 Satellite Blvd. Duluth, GA 30096 USA Signature : _________________________________ Name and Job Title. : Bernard Toussant / Manager, Compliance Engineering E-mail : [email protected] Te l . : 770.623.7473
Date: December 10, 2014 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for confidentiality FCC ID: JEH-7777-01XX To whom it may concern: Short-term confidentiality Pursuant to DA 04-1705 of the Commission’s pubic notice, in order to comply with the marketing regulations in 47CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments for 180 days. 1. Internal Photographs 2. External Photographs 3. User’s manual 4. Test Set up photos Permanent confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: 1. Block Diagram 2. Schematics 3. Operational Description 4. Tune up procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Applicant : NCR Corporation Address : 2651 Satellite Blvd. Duluth, GA 30096 USA Signature : _________________________________ Name and Job Title. : Bernard Toussant / Manager, Regulatory Compliance Engineering E-mail : [email protected]
Date: December 10, 2014 Subject: Ad Hoc Mode Function Declaration FCC ID: JEH-7777-01XX IC: 470B-777701XX To Whom it may concern, We, NCR Corporation, declare that the device (FCC ID: JEH-7777-01XX /IC: 470B-777701XX ) 1. is acting as slave that does not support Ad Hoc Mode function. 2. is acting as client without DFS detection capability. 3. does not transmit at all on frequencies within the band 5600 - 5650 MHz in US/Canada 4. is not able to operate on non-US/Canada frequencies, country code selection will be disabled for this device. 5. In non-associated mode, that software and associated drivers will not initiate any transmission on DFS frequencies. This includes transmissions for beacon ad-hoc peer-to-peer modes. (KDB848637) Regards, Applicant : NCR Corporation Address : 2651 Satellite Blvd. Duluth, GA 30096 USA Signature : _________________________________ Name and Job Title. : Bernard Toussant / Manager, Compliance Engineering E-mail [email protected] Te l . 770.623.7473
Report No. : EP4N0432 SPORTON International Inc. Page Number : B1 of B19 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 APPENDIX B. Photographs of EUT Report No. : EP4N0432 SPORTON International Inc. Page Number : B2 of B19 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Report No. : EP4N0432 SPORTON International Inc. Page Number : B3 of B19 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Report No. : EP4N0432 SPORTON International Inc. Page Number : B4 of B19 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973
Rubicon HHT: Production Labels V04 date: 20141120 Label location
Report No. : EP4N0432 SPORTON International Inc. Page Number : B5 of B19 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Report No. : EP4N0432 SPORTON International Inc. Page Number : B6 of B19 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Report No. : EP4N0432 SPORTON International Inc. Page Number : B7 of B19 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Report No. : EP4N0432 SPORTON International Inc. Page Number : B8 of B19 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Report No. : EP4N0432 SPORTON International Inc. Page Number : B9 of B19 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Report No. : EP4N0432 SPORTON International Inc. Page Number : B10 of B19 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Report No. : EP4N0432 SPORTON International Inc. Page Number : B11 of B19 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Report No. : EP4N0432 SPORTON International Inc. Page Number : B12 of B19 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Report No. : EP4N0432 SPORTON International Inc. Page Number : B13 of B19 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Report No. : EP4N0432 SPORTON International Inc. Page Number : B14 of B19 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Report No. : EP4N0432 SPORTON International Inc. Page Number : B15 of B19 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Report No. : EP4N0432 SPORTON International Inc. Page Number : B16 of B19 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Report No. : EP4N0432 SPORTON International Inc. Page Number : B17 of B19 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Report No. : EP4N0432 SPORTON International Inc. Page Number : B18 of B19 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Report No. : EP4N0432 SPORTON International Inc. Page Number : B19 of B19 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973
FCC SAR Test Report Report No. : FA4N0432 SPORTON INTERNATIONAL INC. Page No. : 1 of 39 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 FCC SAR Test Report Equipment : 7777-01XX Brand Name : Orderman Model No. : 7777-01XX Marketing Name : NCR Orderman7 + FCC ID : JEH-7777-01XX Standard : FCC 47 CFR Part 2 (2.1093) IEEE 1528-2003 Applicant Address : : NCR Corporation 2651 Satellite Blvd. Duluth, GA 30096 USA Manufacturer Address : : Universal Global Scientific Industrial Co., Ltd. 141, Lane 351, Sec.1, Taiping Road, Tsaotuen, Nantou 54261, Taiwan The product sample received on Nov. 5, 2014 and completely tested on Dec. 8, 2014. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been evaluated in accordance with the procedures and shown the compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by: Kevin Liang / Assistant Manager FCC SAR Test Report Report No. : FA4N0432 SPORTON INTERNATIONAL INC. Page No. : 2 of 39 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Table of Contents 1 STATEMENT OF COMPLIANCE .......................................................................................................... 5 1.1 Guidance Standard ................................................................................................................................ 5 1.2 Testing Location Information .................................................................................................................. 5 1.3 Device Category and SAR Limits ........................................................................................................... 6 2 EQUIPMENT UNDER TEST (EUT) ....................................................................................................... 7 2.1 General Information ................................................................................................................................ 7 3 RF EXPOSURE LIMITS ......................................................................................................................... 8 3.1 Uncontrolled Environment ...................................................................................................................... 8 3.2 Controlled Environment .......................................................................................................................... 8 4 SPECIFIC ABSORPTION RATE (SAR) ................................................................................................ 9 4.1 Introduction ............................................................................................................................................. 9 4.2 SAR Definition ........................................................................................................................................ 9 5 SYSTEM DESCRIPTION AND SETUP ............................................................................................... 10 5.1 E-Field Probe ....................................................................................................................................... 11 5.2 E-Field Probe Specification .................................................................................................................. 11 5.3 E-Field Probe Calibration ..................................................................................................................... 12 5.4 Data Acquisition Electronics (DAE) ...................................................................................................... 12 5.5 Robot .................................................................................................................................................... 13 5.6 Measurement Server ............................................................................................................................ 14 5.7 Phantom ............................................................................................................................................... 14 6 MEASUREMENT PROCEDURES ....................................................................................................... 15 6.1 Spatial Peak SAR Evaluation ............................................................................................................... 15 6.2 Power Reference Measurement .......................................................................................................... 16 6.3 Area Scan ............................................................................................................................................. 16 6.4 Zoom Scan ........................................................................................................................................... 17 6.5 Volume Scan Procedures ..................................................................................................................... 17 6.6 Power Drift Monitoring .......................................................................................................................... 17 7 TEST EQUIPMENT LIST ..................................................................................................................... 18 8 SYSTEM VERIFICATION .................................................................................................................... 19 8.1 Tissue Simulating Liquids ..................................................................................................................... 19 8.2 Tissue Verification ................................................................................................................................ 20 8.3 Test Conditions ..................................................................................................................…
Text truncated - open the document above for the full version.
FCC Test Report Report No. : FR4N0432AC SPORTON INTERNATIONAL INC. Page No. : 1 of 52 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 FCC Test Report Equipment : 7777-01XX Brand Name : Orderman Model No. : 7777-01XX Marketing Name : NCR Orderman7 + FCC ID : JEH-7777-01XX Standard : 47 CFR FCC Part 15.247 Operating Band : 2400 MHz – 2483.5 MHz Equipment Class : DTS Applicant Address : : NCR Corporation 2651 Satellite Blvd. Duluth, GA 30096 USA Manufacturer Address : : Universal Global Scientific Industrial Co., Ltd. 141, Lane 351, Sec.1, Taiping Road, Tsaotuen, Nantou 54261, Taiwan The product sample received on Nov. 5, 2014 and completely tested on Dec. 1, 2014. We, SPORTON, would like to declare that the tested sample has been evaluated in accordance with the procedures given in ANSI C63.10-2009 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by: Vic Hsiao / Supervisor FCC Test Report Report No. : FR4N0432AC SPORTON INTERNATIONAL INC. Page No. : 2 of 52 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information.............................................................................................................................................. 5 1.2 Accessories and Support Equipment ..................................................................................................... 7 1.3 Testing Applied Standards ..................................................................................................................... 7 1.4 Testing Location Information .................................................................................................................. 7 1.5 Measurement Uncertainty ...................................................................................................................... 8 2 TEST CONFIGURATION OF EUT ........................................................................................................ 9 2.1 The Worst Case Modulation Configuration ............................................................................................ 9 2.2 The Worst Case Measurement Configuration ...................................................................................... 10 2.3 Test Setup Diagram ............................................................................................................................. 11 3 TRANSMITTER TEST RESULT .......................................................................................................... 14 3.1 AC Power-line Conducted Emissions .................................................................................................. 14 3.2 6dB Bandwidth ..................................................................................................................................... 17 3.3 RF Output Power .................................................................................................................................. 19 3.4 Power Spectral Density ........................................................................................................................ 22 3.5 Transmitter Radiated Bandedge Emissions ......................................................................................... 24 3.6 Transmitter Radiated Unwanted Emissions ......................................................................................... 27 4 TEST EQUIPMENT AND CALIBRATION DATA ................................................................................ 52 APPENDIX A. TEST PHOTOS APPENDIX B. PHOTOGRAPHS OF EUT FCC Test Report Report No. : FR4N0432AC SPORTON INTERNATIONAL INC. Page No. : 3 of 52 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Summary of Test Result Conformance Test Specifications Report Clause Ref. Std. Clause Description Measured Limit Result 1.1.2 15.203 Antenna Requirement Antenna connector mechanism complied FCC 15.203 Complied 3.1 15.207 AC Power-line Conducted Emissions [dBuV]: 0.4040020MHz 42.01 (Margin 15.76dB) - QP 37.02 (Margin 10.75dB) - AV FCC 15.207 Complied 3.2 15.247(a) 6dB Bandwidth 6dB Bandwidth Unit [MHz] 20M:7.09 ≥500kHz Complied 3.3 15.247(b) RF Output Power (Maximum Peak Conducted Output Power) Power [dBm]:20.20 Power [dBm]:30 Complied 3.4 15.247(d) Power Spectral Density PSD [dBm/100kHz]: -6.09 PSD [dBm/3kHz]:8 Complied 3.5 15.247(c) Transmitter Radiated Bandedge Emissions Non-Restricted Bands: 2399.82MHz: 29.33dB Restricted Bands [dBuV/m at 3m]: 2389.96MHz 67.41 (Margin 6.59dB) - PK 48.67 (Margin 5.33dB) - AV Non-Restricted Bands: > 20 dBc Restricted Bands: FCC 15.209 Complied 3.6 15.247(c) Transmitter Radiated Unwanted Emissions Restricted Bands [dBuV/m at 3m]: 47.460MHz 30.89 (Margin 9.11dB) - QP Non-Restricted Bands: > …
Text truncated - open the document above for the full version.
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 2 | 15C | 2.41 GHz - 2.46 GHz | 104.70 mW |

NCR Orderman Base Station4
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
7777-01YY
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
2381 Gate RFID
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
2381 Gripper RFID
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
Remote Button Activator
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter