JYCP9070GSM/WCDMA/LTE Phone with Bluetooth/WLAN

User Guide for Android 2.3 (Gingerbread) Thank you for choosing Pantech P9070, our latest smartphone. Pantech P9070 has many features designed to enhance your mobile experience. With its unique and stylish design you will enjoy the entire P9070 experience. This User Guide contains important and useful information that will maximize your familiarity with all that Pantech P9070 has to offer. P9070 2 Important Safety Information Safety information The following list shows how to maintain your mobile phone and precautions to take as you use the device. xKeep your mobile phone and its accessories out of the reach of children and pets. xMaintain your mobile phone in dry conditions and keep it within normal operating temperatures. It may be damaged at temperatures higher than 55°C/131°F or lower than -20°C/-4°F. xDo not dry your phone in a microwave oven. Sparks may occur and cause an explosion or fire. xDo not use or store your mobile phone in dusty, dirty areas. xDo not disassemble your mobile phone. xDo not drop or cause severe impact to your mobile phone. xDo not clean your mobile phone with chemical products, cleaning solvents or detergents. xContact your dealer immediately if your mobile phone does not work properly. xUse only authorized batteries, battery chargers and accessories. Any malfunction or damage caused by the use of unauthorized batteries, battery chargers and accessories will void the limited product warranty. xEnsure that the battery and the battery charger do not come in contact with conductive objects. xFor optimal performance, use cases and accessories that do not contain magnets. Safety precautions xUsing a mobile phone while driving is prohibited. xUsing a mobile phone while driving can distract your attention and cause an accident. Always switch your phone off to drive safely. xIn an emergency, use a hands-free device built into your car or pull over in a safe place first. xCheck local laws and regulations and comply with them, with regard to the prohibition of mobile phone use while driving. Switch off in restricted areas Always switch your phone off in areas where mobile phone use is restricted. Switch off in an aircraft Always switch your phone off or select the airplane mode (Tap Settings > Wireless & networks > Airplane mode) when you are in an aircraft. Electromagnetic waves emitted by your phone may affect the electronic navigation equipment in the aircraft. Switch off in hospitals and near medical equipment Always switch your phone off in hospitals and obey their regulations. Switch your phone off when using medical equipment for private purposes. Always consult with the medical equipment’s manufacturer or an expert regarding phone use near the medical equipment. 3 Important Safety Information Switch off in dangerous areas Always switch your phone off in areas where explosive or dangerous materials (e.g. fuels or chemical products) are located and obey relevant instructions or signals. Do not insert or remove your mobile phone’s battery in such areas. Install a hands-free device in a safe location Install a hands-free device away from the steering wheel and airbag expansion areas. Otherwise you can be injured in a car accident. Keep away from other electronic devices Mobile phones emit electromagnetic waves that may affect nearby electronic devices. After switching on your phone, do not place it close to other electronic goods. About battery usage Your phone is powered by a Lithium Ion (Li-Ion) battery. In other words, you can recharge your battery while some charge remains without reducing your phone’s autonomy due to the “battery memory effect.” xDo not use a damaged battery or charger. xDo not disassemble, open crush, bend, deform, puncture or shred the battery. xDo not modify or remanufacture, insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazard. xDo not put your battery in contact with conductive objects. xDispose of and recycle used batteries in accordance with local regulations. Do not dispose of batteries by burning; they may explode. xDo not use an unauthorized charger or battery. xUse the battery only for the device for which it is specified. xUse the battery with a charging device that has been qualified for the device per this standard. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard. xDo not short circuit a battery or allow metallic conductive objects to contact battery terminals. xReplace the battery only with another battery that has been qualified with the device per this standard, IEEE- Std-1725-2006. xChildren should be supervised when they use the battery. xAvoid dropping the phone or the battery. If the phone or the battery is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection. xUse your battery for the specified purpose only. xThe closer you move to your network’s base station, the longer you can use your phone because less battery power is required for connection. xThe battery recharging time varies depending on the remaining battery capacity and the battery and charger type. xBattery life inevitably shortens over time. xSince overcharging may shorten battery life, remove the phone from its charger once it is fully charged. Unplug the charger once charging is complete. Leaving the battery in hot or cold places, especially inside a car in summer or winter, may reduce its capacity and life. xTo prevent injury or burns, ensure that no metal objects come into contact with the + and – terminals of the battery. 4 Important Safety Information Basic instructions Useful tips To understand information contained in this user guide, please keep in mind the following: xIt is assumed that you start operating applications of the phone from the Applications screen. 1. Tap from the home screen to access the applications menu screen. 2. Flick the screen up or down and…

Text truncated - open the document above for the full version.

Pantech Co., Ltd. Date: Mar. 16, 2009 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Ms. SunHee Kim of HCT Co., Ltd and hereafter referred to as HCT, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. SunHee Kim of HCT Co., Ltd. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing HCT as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Byung-Wan Kim / Senior Vice President Pantech Co., Ltd.

Pantech Co., Ltd. Pantech Building, I-2, DMC, Sangam-dong, Mapo-gu, Seoul, Korea Date: September 23, 2011 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 RE: Request of Confidentiality for FCC ID: JYCP9070 To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, Pantech Co., Ltd. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give Pantech Co., Ltd. temporary confidentiality of commercially sensitive information prior to product release. The requested Confidential and Temporary Confidential exhibits are listed as follows: CONFIDENTIAL AND SHORT-TERM CONFIDENTIAL LIST Exhibit Description CONFIDENTIAL 1Block Diagram 2Operational Descriptions 3 Parts Lists and Tune-Up Procedure 4 Schematics SHORT-TERM CONFIDENTIAL 5External Photos 6Internal Photos 7Test-Setup Photos 8 User’s Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely, Sun-Hee Kim-Engineer HCT Co., Ltd. cc. Pantech Co., Ltd.

FCC ID: JYCP9070 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １ of 7 EXTERNAL PHOTOGRAPHS FCC ID: JYCP9070 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ２ of 7 ■ EXTERNAL PHOTO FCC ID: JYCP9070 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ３ of 7 ■ EXTERNAL PHOTO FCC ID: JYCP9070 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ４ of 7 ■ EXTERNAL PHOTO FCC ID: JYCP9070 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ５ of 7 ■ EXTERNAL PHOTO FCC ID: JYCP9070 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ６ of 7 ■ EXTERNAL PHOTO FCC ID: JYCP9070 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ７ of 7 ■ EXTERNAL PHOTO

-. Note: The FCC Label will be visible at the time of purchase.

FCC ID: JYCP9070 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １ of 9 INTERNAL PHOTOGRAPHS FCC ID: JYCP9070 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ２ of 9 ■ INTERNAL PHOTO FCC ID: JYCP9070 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ３ of 9 ■ INTERNAL PHOTO FCC ID: JYCP9070 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ４ of 9 ■ INTERNAL PHOTO FCC ID: JYCP9070 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ５ of 9 ■ INTERNAL PHOTO FCC ID: JYCP9070 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ６ of 9 ■ INTERNAL PHOTO FCC ID: JYCP9070 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ７ of 9 ■ INTERNAL PHOTO FCC ID: JYCP9070 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ８ of 9 ■ INTERNAL PHOTO FCC ID: JYCP9070 HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ９ of 9 ■ INTERNAL PHOTO

SAR TEST REPORT HCT CO., LTD EUT Type: GSM/WCDMA/LTE Phone with Bluetooth and WLAN FCC ID: JYCP9070 Model: P9070 Date of Issue: Sept. 23, 2011 Test report No.: HCTA1107FS04 Test Laboratory: HCT CO., LTD. 105-1, Jangam-ri, Majang-myeon, Icheon-si, Gyeonggi-do, Korea 467-811 TEL: +82 31 645 6485 FAX: +82 31 645 6401 Applicant : Pantech Co., Ltd. Pantech Building, I-2, DMC, Sangam-dong, Mapo-gu,Seoul, Korea(ZIP :121-792) Tel: 82-2-2030-1319 Fax: 82-2-2030-2500 Testing has been carried out in accordance with: RSS-102 Issue 4; Health Canada Safety Code 6 47CFR §2.1093 FCC OET Bulletin 65(Edition 97-01), Supplement C (Edition 01-01) ANSI/ IEEE C95.1 – 1992 IEEE 1528-2003 Test result: The tested device complies with the requirements in respect of all parameters subject to the test. The test results and statements relate only to the items tested. The test report shall not be reproduced except in full, without written approval of the laboratory. Signature Report prepared by Approved by : Young-Soo Jang : Jae-Sang So Test Engineer of SAR Part Manager of SAR Part Report No.: HCTA1107FS04 FCC ID: JYCP9070 Date of Issue: Sep. 22, 2011 HCT CO., LTD. 105-1, Jangam-ri, Majang-myeon, Icheon-si,Gyeonggi-do,Korea 467-811 TEL: +82 31 645 64851 FAX: +82 31 645 6401 www.hct.co.kr 2 of 385 Table of Contents 1. INTRODUCTION .................................................................................................................................... ３ 2. DESCRIPTION OF DEVICE .................................................................................................................... ４ 3. DESCRIPTION OF TEST EQUIPMENT .................................................................................................. ６ 4. SAR MEASUREMENT PROCEDURE ................................................................................................. １３ 5. DESCRIPTION OF TEST POSITION .................................................................................................. １４ 6. MEASUREMENT UNCERTAINTY ....................................................................................................... １６ 7. ANSI/ IEEE C95.1 - 1992 RF EXPOSURE LIMITS .............................................................................. １８ 8. SYSTEM VERIFICATION .................................................................................................................... １９ 9. RF CONDUCTED POWER MEASUREMENT ..................................................................................... ２１ 10. SAR Test configuration & Antenna Information................................................................................... ３２ 11. SAR Considerations for Multiple Transmitters and Antennas .............................................................. ３４ 12. SAR TEST DATA SUMMARY ............................................................................................................ ３８ 12.1 Measurement Results (GSM850 Head SAR) ............................................................................ ３９ 12.2 Measurement Results (GSM1900 Head SAR) .......................................................................... ４０ 12.3 Measurement Results (GPRS850 VoIP Head SAR) .................................................................. ４１ 12.4 Measurement Results (GPRS1900 VoIP Head SAR) ................................................................ ４２ 12.5 Measurement Results (WCDMA850 Head SAR)....................................................................... ４３ 12.6 Measurement Results (WCDMA1900 Head SAR) ..................................................................... ４４ 12.7 Measurement Results (802.11b/g/n Head) ................................................................................ ４５ 12.8 Measurement Results (LTE Band17 10MHz QPSK Head SAR) ................................................ ４６ 12.9 Measurement Results (LTE Band17 10MHz 16QAM Head SAR) .............................................. ４７ 12.10 Measurement Results (LTE Band5 10MHz QPSK Head SAR) ................................................ ４８ 12.11 Measurement Results (LTE Band5 10MHz 16QAM Head SAR) .............................................. ４９ 12.12 Measurement Results (LTE Band4 10MHz QPSK Head SAR) ................................................ ５０ 12.13 Measurement Results (LTE Band4 10MHz 16QAM Head SAR) .............................................. ５１ 12.14 Measurement Results (GSM850 Hotspot SAR)....................................................................... ５２ 12.15 Measurement Results (GSM1900 Hotspot SAR) ..................................................................... ５３ 12.16 Measurement Results (WCDMA850 Hotspot SAR) ................................................................. ５４ 12.17 Measurement Results (WCDMA1900 Hotspot SAR) ............................................................... ５５ 12.18 Measurement Results (802.11b/g/n Hotspot SAR) .................................................................. ５６ 12.19 Measurement Results (LTE Band17 10MHz QPSK Hotspot SAR) ........................................... ５７ 12.20 Measurement Results (LTE Band17 10MHz 16QAM Hotspot SAR) ........................................ ５８ 12.21 Measurement Results (LTE Band5 10MHz QPSK Hotspot SAR)............................................. ５９ 12.21 Measurement Results (LTE Band5 10MHz 16QAM Hotspot SAR) .......................................... ６０ 12.22 Measurement Results (LTE Band4 10MHz QPSK Hotspot SAR)............................................. ６１ 12.23 Measurement Results (LTE Band4 10MHz 16QAM Hotspot SAR) .......................................... ６２ 13. CONCLUSION .................................................................................................................................. ３９ 14. REFERENCES ................................................................................................................................. ６４ Attachment 1. – SAR T…

Text truncated - open the document above for the full version.

Report No.: HCTA1107FS04 FCC ID: JYCP9070 Date of Issue: Sep. 22, 2011 HCT CO., LTD. 105-1, Jangam-ri, Majang-myeon, Icheon-si,Gyeonggi-do,Korea 467-811 TEL: +82 31 645 64851 FAX: +82 31 645 6401 www.hct.co.kr 304 of 385 Attachment 2. – Dipole Validation Plots Report No.: HCTA1107FS04 FCC ID: JYCP9070 Date of Issue: Sep. 22, 2011 HCT CO., LTD. 105-1, Jangam-ri, Majang-myeon, Icheon-si,Gyeonggi-do,Korea 467-811 TEL: +82 31 645 64851 FAX: +82 31 645 6401 www.hct.co.kr 305 of 385  Validation Data (750 MHz Head) Test Laboratory: HCT CO., LTD Input Power 100 mW (20 dBm) Liquid Temp: 21.2 °C Test Date: Aug.03, 2011 DUT: Dipole 750 MHz; Type: D750V3; Serial: D750V3 - SN:1014 Communication System: CW; Frequency: 750 MHz;Duty Cycle: 1:1 Medium parameters used: f = 750 MHz; σ = 0.866 mho/m; ε r = 42.2; ρ = 1000 kg/m 3 Phantom section: Flat Section ; Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 DASY4 Configuration: - Probe: ET3DV6 - SN1798; ConvF(6.94, 6.94, 6.94); Calibrated: 2011-04-14 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn466; Calibrated: 2011-03-01 - Phantom: SAM 835/900 MHz; Type: SAM Validation 750MHz/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.890 mW/g Validation 750MHz/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 33.2 V/m; Power Drift = 0.005 dB Peak SAR (extrapolated) = 1.20 W/kg SAR(1 g) = 0.825 mW/g; SAR(10 g) = 0.544 mW/g Maximum value of SAR (measured) = 0.890 mW/g 0 dB = 0.890mW/g Report No.: HCTA1107FS04 FCC ID: JYCP9070 Date of Issue: Sep. 22, 2011 HCT CO., LTD. 105-1, Jangam-ri, Majang-myeon, Icheon-si,Gyeonggi-do,Korea 467-811 TEL: +82 31 645 64851 FAX: +82 31 645 6401 www.hct.co.kr 306 of 385  Validation Data (750 MHz Body) Test Laboratory: HCT CO., LTD Input Power 100 mW (20 dBm) Liquid Temp: 21.3 °C Test Date: Aug.02, 2011 DUT: Dipole 750 MHz; Type: D750V3; Serial: D750V3 - SN:1014 Communication System: CW; Frequency: 750 MHz;Duty Cycle: 1:1 Medium parameters used: f = 750 MHz; σ = 0.969 mho/m; ε r = 54.7; ρ = 1000 kg/m 3 Phantom section: Flat Section ; Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 DASY4 Configuration: - Probe: ET3DV6 - SN1798; ConvF(6.79, 6.79, 6.79); Calibrated: 2011-04-14 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn466; Calibrated: 2011-03-01 - Phantom: SAM 835/900 MHz; Type: SAM Validation 750MHz/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.950 mW/g Validation 750MHz/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 32.6 V/m; Power Drift = -0.012 dB Peak SAR (extrapolated) = 1.26 W/kg SAR(1 g) = 0.878 mW/g; SAR(10 g) = 0.576 mW/g Maximum value of SAR (measured) = 0.957 mW/g 0 dB = 0.957mW/g Report No.: HCTA1107FS04 FCC ID: JYCP9070 Date of Issue: Sep. 22, 2011 HCT CO., LTD. 105-1, Jangam-ri, Majang-myeon, Icheon-si,Gyeonggi-do,Korea 467-811 TEL: +82 31 645 64851 FAX: +82 31 645 6401 www.hct.co.kr 307 of 385  Validation Data (835 MHz Head) Test Laboratory: HCT CO., LTD Input Power 100 mW (20 dBm) Liquid Temp: 21.3 °C Test Date: Jul.29, 2011 DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 - SN:441 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835 MHz; σ = 0.901 mho/m; ε r = 43; ρ = 1000 kg/m 3 Phantom section: Flat Section ; Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 DASY4 Configuration: - Probe: ET3DV6 - SN1798; ConvF(6.72, 6.72, 6.72); Calibrated: 2011-04-14 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn466; Calibrated: 2011-03-01 - Phantom: SAM 835/900 MHz; Type: SAM Validation 835MHz/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.03 mW/g Validation 835MHz/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 35.1 V/m; Power Drift = -0.008 dB Peak SAR (extrapolated) = 1.39 W/kg SAR(1 g) = 0.956 mW/g; SAR(10 g) = 0.630 mW/g Maximum value of SAR (measured) = 1.03 mW/g 0 dB = 1.03mW/g Report No.: HCTA1107FS04 FCC ID: JYCP9070 Date of Issue: Sep. 22, 2011 HCT CO., LTD. 105-1, Jangam-ri, Majang-myeon, Icheon-si,Gyeonggi-do,Korea 467-811 TEL: +82 31 645 64851 FAX: +82 31 645 6401 www.hct.co.kr 308 of 385  Validation Data (835 MHz Body) Test Laboratory: HCT CO., LTD Input Power 100 mW (20 dBm) Liquid Temp: 21.3 °C Test Date: Jul.29, 2011 DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 - SN:441 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835 MHz; σ = 0.95 mho/m; ε r = 55.9; ρ = 1000 kg/m 3 Phantom section: Flat Section ; Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 DASY4 Configuration: - Probe: ET3DV6 - SN1798; ConvF(6.5, 6.5, 6.5); Calibrated: 2011-04-14 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn466; Calibrated: 2011-03-01 - Phantom: SAM 835/900 MHz; Type: SAM Validation 835MHz/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.02 mW/g Validation 835MHz/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 34.1 V/m; Power Drift = 0.005 dB Peak SAR (extrapolated) = 1.33 W/kg SAR(1 g) = 0.940 mW/g; SAR(10 g) = 0.624 mW/g Maximum value of SAR (measured) = 1.02 mW/g 0 dB = 1.02mW/g Report No.: HCTA1107FS04 FCC ID: JYCP9070 Date of Issue: Sep. 22, 2011 HCT CO., LTD. 105-1, Jangam-ri, Majang-myeon, Icheon-si,Gyeonggi-do,Korea 467-811 TEL: +82 31 645 64851 FAX: +82 31 645 6401 www.hct.co.kr 309 of 385  Validation Data (835 MHz Head) Test Laboratory: HCT CO., LTD Input Power 100 mW (20 dBm) Liquid Temp: 21.3 °C Test Date: Aug.04, 2011 DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 - SN:441 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium parameters used: f = 83…

Text truncated - open the document above for the full version.

FCC PT.15.247 TEST REPORT FCC CERTIFICATION REPORT www.hct.co.kr Test Report No. HCTR1108FR06-1 Date of Issue: September 29, 2011 EUT Type: GSM/WCDMA/LTE Phone with Bluetooth/WLAN FCC ID: JYCP9070 Page １ of 83 HCT CO., LTD. CERTIFICATE OF COMPLIANCE FCC Certification Applicant Name: Pantech Co., Ltd. Address: Pantech Bldg, I-2, DMC, Sangam-dong, Mapo-gu, Seoul, 121-792, Korea Date of Issue: September 29, 2011 Test Site/Location: HCT CO., LTD., 105-1, Jangam-ri, Majang-Myeon, Icheon- si, Kyunggi-Do, Korea Report No.: HCTR1108FR06-1 HCT FRN: 0005866421 FCC ID: APPLICANT: JYCP9070 Pantech Co., Ltd. FCC Model(s): P9070 EUT Type: GSM/WCDMA/LTE Phone with Bluetooth/WLAN Max. RF Output Power: Wi-Fi 802.11b(23.58 dBm) / Wi-Fi 802.11g (23.30 dBm) ) / Wi-Fi 802.11n (22.12 dBm) Frequency Range: 2412 MHz -2462 MHz Modulation type CCK/DSSS/OFDM FCC Classification: Digital Transmission System(DTS) FCC Rule Part(s): Part 15.247 Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated, and the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. HCT CO., LTD. Certifies that no party to this application has subject to a denial of Federal benefits that includes FCC benefits pursuant to section 5301 of the Anti-Drug Abuse Act of 1998,21 U.S. C.853(a) This report only responds to the tested sample and may not be reproduced, except in full, without written approval of the HCT Co., Ltd. FCC PT.15.247 TEST REPORT FCC CERTIFICATION REPORT www.hct.co.kr Test Report No. HCTR1108FR06-1 Date of Issue: September 29, 2011 EUT Type: GSM/WCDMA/LTE Phone with Bluetooth/WLAN FCC ID: JYCP9070 Page ２ of 83 Version TEST REPORT NO. DATE DESCRIPTION HCTR1108FR06 August 4, 2011 - First Approval Report HCTR1108FR06-1 September 29, 2011 - Ant. Gain amendment (Page4) FCC PT.15.247 TEST REPORT FCC CERTIFICATION REPORT www.hct.co.kr Test Report No. HCTR1108FR06-1 Date of Issue: September 29, 2011 EUT Type: GSM/WCDMA/LTE Phone with Bluetooth/WLAN FCC ID: JYCP9070 Page ３ of 83 Table of Contents 1. GENERAL INFORMATION ..........................................................................................................................４ 2. EUT DESCRIPTION .....................................................................................................................................４ 3. TEST METHODOLOGY ...............................................................................................................................５ 3.1 EUT CONFIGURATION ......................................................................................................................５ 3.2 EUT EXERCISE ..................................................................................................................................５ 3.3 GENERAL TEST PROCEDURES ......................................................................................................５ 3.4 DESCRIPTION OF TEST MODES .....................................................................................................５ 4. INSTRUMENT CALIBRATION.....................................................................................................................６ 5. FACILITIES AND ACCREDITATIONS .........................................................................................................６ 5.1 FACILITIES .........................................................................................................................................６ 5.2 EQUIPMENT .......................................................................................................................................６ 6. ANTENNA REQUIREMENTS ......................................................................................................................７ 7. TEST RESULT .............................................................................................................................................８ 7.1 6dB BANDWIDTH MEASUREMENT (802.11b/g/n) ..........................................................................８ 7.2 OUTPUT POWER MEASUREMENT (802.11b/g/n).......................................................................１５ 7.3 POWER SPECTRAL DENSITY (802.11b/g/n)..............................…

Text truncated - open the document above for the full version.