JYCSTARQCDMA/LTE Phone with Bluetooth & WLAN

User Guide for ADR910L Thank you for choosing the Pantech ADR910L, our latest smartphone. The Pantech ADR910L has many features designed to enhance your mobile experience. With its unique, stylish design, you will enjoy the entire ADR910L experience. This User Guide contains important and useful information that will maximize your familiarity with all that the Pantech ADR910L has to offer. 2 IMPORTANT SAFETY INFORMATION ABOUT BATTERY USAGE Your phone is powered by a Lithium Ion (Li-Ion) battery. Therefore, you can recharge the battery while some charge remains without reducing your phone’s autonomy. For safe use of the battery: xDo not use a damaged battery or charger. xDo not disassemble, open, crush, bend, deform, puncture, or shred the battery. xDo not modify or remanufacture, insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazard. xDo not put your battery in contact with conductive objects. xDispose of and recycle used batteries in accordance with local regulations. Do not dispose of batteries by burning; they may explode. xDo not use an unauthorized charger or battery. xUse the battery only for the device for which it is specified. xUse the battery with a charging device that has been qualified for the device per this standard. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard. xDo not short circuit a battery or allow metallic conductive objects to contact battery terminals. xReplace the battery only with another battery that has been qualified with the device per this standard, IEEEStd-1725-2006. xChildren should be supervised when they use the battery. 3 BASIC INSTRUCTIONS xAvoid dropping the phone or the battery. If the phone or the battery is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection. xUse your battery for the specified purpose only. xThe closer you move to your network’s base station, the longer you can use your phone because less battery power is required for connection. xThe battery recharging time varies depending on the remaining battery capacity and the battery and charger type. xBattery life inevitably shortens over time. xSince overcharging may shorten battery life, remove the phone from its charger once it is fully charged. Unplug the charger once charging is complete. Leaving the battery in hot or cold places, especially inside a car in summer or winter, may reduce its capacity and life. xTo prevent injury or burns, ensure that no metal objects come into contact with the + and – terminals of the battery. BASIC INSTRUCTIONS USEFUL TIPS TO UNDERSTAND USER GUIDE To understand information contained in this user guide and activities that you can do with the ADR910L, keep in mind the following tips: xIt is assumed that you start operating applications of the ADR910L from the Applications screen. 1 Touch Menu from the Home screen to access the Applications screen. 4 BASIC INSTRUCTIONS 2 Swipe the screen left or right and run the application you want to use. Applications are arranged by category. You can rearrange them. Accessing applicationsNavigating Applications xWords in bold type refer to the relevant action on the screen. For example, “Touch Gmail” means that you have to touch Gmail below the Gmail icon . Words might be placed below or next to an icon or included in the text. xThe symbol “>” refers to the next action. For example, “Touch Settings > Language & input” means that you should touch Settings first and then Language & input next. xApplications screen refers to the screen where all applications of the ADR910L appear. xHome Screen refers to the screen that appears first when you unlock the screen. xIdle mode refers to the status where you stay on the Home screen ready to run an application. 5 BASIC INSTRUCTIONS xLauncher bar refers to the bar on the bottom of the Home Screen where you can place favorite applications. xChannels through which you can share items, e.g. contacts and pictures, increase as you subscribe to services. For example, if you sign up for Facebook or Twitter, you can also share information through Facebook or Twitter. xCaptured images in this user guide might change according to the relevant software upgrade. COMMON ICONS IconSelected to Adjust value Rearrange the selected item The battery is charging SD card prepared There is an error Delete the selected item Strength of battery: The greener, the more battery is charged 6 BASIC INSTRUCTIONS IconSelected to There is no SIM/USIM card The memory disk is full The phone will not ring when there is an incoming call 7 Important Safety Information .................................................. 2 BASIC INSTRUCTIONS ....................................................................................................... 3 TABLE OF CONTENTS ................................................................... 7 1. GETTING STARTED GETTING STARTED ...................................................................... 13 CHECKING PACKAGE .......................................................................................................13 REMOVING THE BATTERY COVER .............................................................................14 REPLACING THE BATTERY COVER ............................................................................14 INSTALLING THE 4G SIM CARD..................................................................................15 REMOVING THE 4G SIM CARD ...................................................................................15 INSTALLING THE microSD™ CARD...........................................................................16 REMOVING THE microSD™ CARD ............................................................................16 INSTALLING THE BATTERY ............................................................................................17 REMOVING THE BATTER…

Text truncated - open the document above for the full version.

Pantech Co., Ltd. Date: Mar. 16, 2009 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Ms. SunHee Kim of HCT Co., Ltd and hereafter referred to as HCT, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. SunHee Kim of HCT Co., Ltd. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing HCT as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Byung-Wan Kim / Senior Vice President Pantech Co., Ltd.

Pantech Co., Ltd. Pantech Building, I-2, DMC, Sangam-dong, Mapo-gu, Seoul, Korea Date: February 23, 2012 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 RE: Request of Confidentiality for FCC ID: JYCSTARQ To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, Pantech Co., Ltd. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give Pantech Co., Ltd. temporary confidentiality of commercially sensitive information prior to product release. The requested Confidential and Temporary Confidential exhibits are listed as follows: CONFIDENTIAL AND SHORT-TERM CONFIDENTIAL LIST Exhibit Description CONFIDENTIAL 1Block Diagram 2Operational Descriptions 3 Parts Lists and Tune-Up Procedure 4 Schematics SHORT-TERM CONFIDENTIAL 5External Photos 6Internal Photos 7Test-Setup Photos 8 User’s Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely, Sun-Hee Kim-Engineer HCT Co., Ltd. cc. Pantech Co., Ltd.

FCC ID: JYCSTARQ HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １ of 13 EXTERNAL PHOTOGRAPHS FCC ID: JYCSTARQ HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ２ of 13 ■ EXTERNAL PHOTO FCC ID: JYCSTARQ HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ３ of 13 ■ EXTERNAL PHOTO FCC ID: JYCSTARQ HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ４ of 13 ■ EXTERNAL PHOTO FCC ID: JYCSTARQ HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ５ of 13 ■ EXTERNAL PHOTO FCC ID: JYCSTARQ HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ６ of 13 ■ EXTERNAL PHOTO FCC ID: JYCSTARQ HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ７ of 13 ■ EXTERNAL PHOTO FCC ID: JYCSTARQ HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ８ of 13 ■ EXTERNAL PHOTO FCC ID: JYCSTARQ HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ９ of 13 ■ EXTERNAL PHOTO FCC ID: JYCSTARQ HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １０ of 13 ■ EXTERNAL PHOTO FCC ID: JYCSTARQ HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １１ of 13 ■ EXTERNAL PHOTO FCC ID: JYCSTARQ HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １２ of 13 ■ EXTERNAL PHOTO FCC ID: JYCSTARQ HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １３ of 13 ■ EXTERNAL PHOTO

FCC ID: JYCSTARQ HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １ of 10 INTERNAL PHOTOGRAPHS FCC ID: JYCSTARQ HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ２ of 10 ■ INTERNAL PHOTO FCC ID: JYCSTARQ HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ３ of 10 ■ INTERNAL PHOTO FCC ID: JYCSTARQ HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ４ of 10 ■ INTERNAL PHOTO FCC ID: JYCSTARQ HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ５ of 10 ■ INTERNAL PHOTO FCC ID: JYCSTARQ HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ６ of 10 ■ INTERNAL PHOTO FCC ID: JYCSTARQ HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ７ of 10 ■ INTERNAL PHOTO FCC ID: JYCSTARQ HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ８ of 10 ■ INTERNAL PHOTO FCC ID: JYCSTARQ HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ９ of 10 ■ INTERNAL PHOTO FCC ID: JYCSTARQ HCT CO., LTD 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO, 467-811 KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １０ of 10 ■ INTERNAL PHOTO

SAR TEST REPORT HCT CO., LTD EUT Type: CDAM/LTE Phone with Bluetooth & WLAN FCC ID: JYCSTARQ Model: ADR910L Date of Issue: Mar. 12, 2012 Test report No.: HCTA1202FS06 Test Laboratory: HCT CO., LTD. 105-1, Jangam-ri, Majang-myeon, Icheon-si,Gyeonggi-do,Korea 467-811 TEL: +82 31 645 6485 FAX: +82 31 645 6401 Applicant : Pantech Co., Ltd. Pantech Building, I-2, DMC, Sangam-dong, Mapo-gu,Seoul, Korea(ZIP :121-792) Tel: 82-2-2030-1319 Fax: 82-2-2030-2500 Testing has been carried out in accordance with: RSS-102 Issue 4; Health Canada Safety Code 6 47CFR §2.1093 FCC OET Bulletin 65(Edition 97-01), Supplement C (Edition 01-01) ANSI/ IEEE C95.1 – 1992 IEEE 1528-2003 Test result: The tested device complies with the requirements in respect of all parameters subject to the test. The test results and statements relate only to the items tested. The test report shall not be reproduced except in full, without written approval of the laboratory. Signature Report prepared by Approved by : Young-Soo Jang : Jae-Sang So Test Engineer of SAR Part Manager of SAR Part Report No.: HCTA1202FS06 FCC ID: JYCSTARQ Date of Issue: Mar. 12, 2012 HCT CO., LTD. 105-1, Jangam-ri, Majang-myeon, Icheon-si,Gyeonggi-do,Korea 467-811 TEL: +82 31 645 64851 FAX: +82 31 645 6401 www.hct.co.kr 2 of 275 Table of Contents 1. INTRODUCTION .......................................................................................................................................... ３ 2. DESCRIPTION OF DEVICE ......................................................................................................................... ４ 3. DESCRIPTION OF TEST EQUIPMENT ...................................................................................................... ６ 4. SAR MEASUREMENT PROCEDURE ..................................................................................................... １３ 5. DESCRIPTION OF TEST POSITION ....................................................................................................... １４ 6. MEASUREMENT UNCERTAINTY ........................................................................................................... １６ 7. ANSI/ IEEE C95.1 - 1992 RF EXPOSURE LIMITS .................................................................................. １８ 8. SYSTEM VERIFICATION ......................................................................................................................... １９ 8.1 Tissue Verification ...................................................................................................................... １９ 8.2 System Validation ...................................................................................................................... ２０ 8.3 System Validation Procedure ..................................................................................................... ２０ 9. RF CONDUCTED POWER MEASUREMENT ......................................................................................... ２１ 9.1 CDMA & EVDO................................................................................................................................ ２１ 9.2 WiFi ........................................................................................................................................... ２４ 9.3 LTE ............................................................................................................................................ ２６ 9.4. SVLTE/SVDO RF Conducted Power.............................................................................................. ２７ 10. SAR Test configuration & Antenna Information ...................................................................................... ３０ 11. SAR Evaluation Considerations for Handsets with Multiple Transmitters and Antennas ....................... ３３ 12. SAR TEST DATA SUMMARY ................................................................................................................. ４０ 12.1 Measurement Results (CDMA835/EVDO835 Head SAR) ......................................................... ４０ 12.2 Measurement Results (PCS1900/EVDO1900 Head SAR) ........................................................ ４１ 12.3 Measurement Results (LTE Band13 QPSK Head SAR) ............................................................ ４２ 12.4 Measurement Results (LTE Band13 16QAM Head SAR) .......................................................... ４３ 12.5 Measurement Results (802.11b/g/n Head SAR) ........................................................................ ４４ 12.6 Measurement Results (CDMA835 Body-worn SAR) ................................................................. ４５ 12.7 Measurement Results (EVDO835 Hotspot SAR) ....................................................................... ４６ 12.8 Measurement Results(PCS1900 Body-worn SAR) .................................................................... ４７ 12.9 Measurement Results(EVDO1900 Hotspot SAR) ...................................................................... ４８ 12.10 Measurement Results (LTE Band13 QPSK Hotspot SAR) ....................................................... ４９ 12.11 Measurement Results (LTE Band13 16QAM Hotspot SAR) ..................................................... ５０ 12.12 Measurement Results (802.11b/g/n Hotspot SAR) .................................................................. ５１ 12.13 SV-DO Body Volume Scans & Combined Results ................................................................... ５２ 13. CONCLUSION ........................................................................................................................................ ５３ 14. REFERENCES ....................................................................................................................................... ５４ Attachment 1. – SAR Test Plots .................................................................................................................... ５５ Volume Scan & Multi Band Results ........…

Text truncated - open the document above for the full version.

FCC PT.15.247 TEST REPORT FCC CERTIFICATION REPORT www.hct.co.kr Test Report No. HCTR1202FR23 Date of Issue: February 24, 2012 EUT Type: CDMA/LTE Phone with Bluetooth & WLAN FCC ID: JYCSTARQ Page ２ of 118 Version TEST REPORT NO. DATE DESCRIPTION HCTR1202FR23 February 24, 2012 - First Approval Report FCC PT.15.247 TEST REPORT FCC CERTIFICATION REPORT www.hct.co.kr Test Report No. HCTR1202FR23 Date of Issue: February 24, 2012 EUT Type: CDMA/LTE Phone with Bluetooth & WLAN FCC ID: JYCSTARQ Page ３ of 118 Table of Contents 1. GENERAL INFORMATION .......................................................................................................................... ４ 2. EUT DESCRIPTION ..................................................................................................................................... ４ 3. TEST METHODOLOGY ............................................................................................................................... ５ 3.1 EUT CONFIGURATION ...................................................................................................................... ５ 3.2 EUT EXERCISE .................................................................................................................................. ５ 3.3 GENERAL TEST PROCEDURES ...................................................................................................... ５ 3.4 DESCRIPTION OF TEST MODES ..................................................................................................... ５ 4. INSTRUMENT CALIBRATION..................................................................................................................... ６ 5. FACILITIES AND ACCREDITATIONS ......................................................................................................... ６ 5.1 FACILITIES ......................................................................................................................................... ６ 5.2 EQUIPMENT ....................................................................................................................................... ６ 6. ANTENNA REQUIREMENTS ...................................................................................................................... ７ 7. SUMMARY TEST OF RESULTS ................................................................................................................. ８ 8. TEST RESULT ............................................................................................................................................. ９ 8.1 6dB BANDWIDTH MEASUREMENT (802.11b/g/n) .......................................................................... ９ 8.2 OUTPUT POWER MEASUREMENT (802.11b/g/n) ....................................................................... １６ 8.3 POWER SPECTRAL DENSITY (802.11b/g/n) ............................................................................... ８３ 8.4 OUT OF BAND EMISSIONS AT THE BAND EDGE/ CONDUCTED SPURIOUS EMISSIONS ... ９０ 8.5 RADIATED MEASUREMENT. ..................................................................................................... １０４ 8.5.1 RADIATED SPURIOUS EMISSIONS. ............................................................................... １０４ 8.5.2 RADIATED RESTRICTED BAND EDGE MEASUREMENTS .......................................... １１２ 8.6 POWERLINE CONDUCTED EMISSIONS .................................................................................. １１３ 9. LIST OF TEST EQUIPMENT ..................................................................................................... ........... １１８ FCC PT.15.247 TEST REPORT FCC CERTIFICATION REPORT www.hct.co.kr Test Report No. HCTR1202FR23 Date of Issue: February 24, 2012 EUT Type: CDMA/LTE Phone with Bluetooth & WLAN FCC ID: JYCSTARQ Page ４ of 118 1. GENERAL INFORMATION Applicant: Pantech Co., Ltd. Address: Pantech Bldg, I-2, DMC, Sangam-dong, Mapo-gu, Seoul, 121-792, Korea FCC ID: JYCSTARQ EUT Type: CDMA/LTE Phone with Bluetooth & WLAN Model name(s): ADR910L Date(s) of Tests: January 20, 2012 ~ February 16, 2012 Contact Person: Name: Jung Hwan Kim Phone #: +82-2-2030-1269 Place of Tests: HCT Co., Ltd. 105-1, Jangam-ri , Majang-Myeon, Icheon-si, Kyunggi-Do, 467-811, KOREA. (IC Recognition No. : 5944A-3) 2. EUT DESCRIPTION EUT Type CDMA/LTE Phone with Bluetooth & WLAN FCC Model Name ADR910L Power Supply DC 3.7 V Battery type Li-ion Battery(Standard) Frequency Range TX: 2412 MHz ~ 2462 MHz RX: 2412 MHz ~ 2462 MHz Max. RF Output Power: Peak: Wi-Fi 802.11b(23.11 dBm) / Wi-Fi 802.11g (22.83 dBm) / Wi-Fi 802.11n (21.82 dBm) Average: Wi-Fi 802.11b(16.69 dBm) / Wi-Fi 802.11g (14.89 dBm) / Wi-Fi 802.11n (13.87 dBm) Modulation Type DSSS/CCK(802.11b), OFDM(802.11g, 802.11n) Antenna Specification Manufacturer: DONGNAM Antenna type: FPCB Antenna Peak Gain : 0.3 dBi FCC PT.15.247 TEST REPORT FCC CERTIFICATION REPORT www.hct.co.kr Test Report No. HCTR1202FR23 Date of Issue: February 24, 2012 EUT Type: CDMA/LTE Phone with Bluetooth & WLAN FCC ID: JYCSTARQ Page ５ of 118 3. TEST METHODOLOGY The measurement procedure described in the American National Standard for Methods of Measurement of Radio-Noise Emission from Low-Voltage Electrical and Electronic Equipment in the Range of 9kHz to 40GHz(ANSI C63.4-2003) 3.1 EUT CONFIGURATION The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and operating in a manner that intends to maximize its emission characteristics in a continuous normal application. 3.2 EUT EXERCISE The EUT was operated in the engineering mode to fix the Tx frequency that was for the purpose of the measurements. According to its specifications, the EUT must comply with the requirements of the Section 15.207, 15.209 and 15.247 under the FCC Rules Part 15 Subpart C. 3.3 GENERAL TEST PROCEDURES Conducted Emissions The EUT is placed on the turntable, which is 0.8 m above ground plane. According to the requirements in…

Text truncated - open the document above for the full version.

FCC PT.15.247 TEST REPORT FCC CERTIFICATION REPORT www.hct.co.kr Test Report No. HCTR1202FR24-01 Date of Issue: March 08, 2012 EUT Type: CDMA/LTE Phone with Bluetooth & WLAN FCC ID: JYCSTARQ Page ２ of 43 Version TEST REPORT NO. DATE DESCRIPTION HCTR1202FR24 February 24, 2012 - First Approval Report HCTR1202FR24-1 March 08, 2012 - Revised 6 dB BW unit(MHz  kHz) FCC PT.15.247 TEST REPORT FCC CERTIFICATION REPORT www.hct.co.kr Test Report No. HCTR1202FR24-01 Date of Issue: March 08, 2012 EUT Type: CDMA/LTE Phone with Bluetooth & WLAN FCC ID: JYCSTARQ Page ３ of 43 Table of Contents 1. GENERAL INFORMATION .......................................................................................................................... ４ 2. EUT DESCRIPTION ..................................................................................................................................... ４ 3. TEST METHODOLOGY ............................................................................................................................... ５ 3.1 EUT CONFIGURATION ...................................................................................................................... ５ 3.2 EUT EXERCISE .................................................................................................................................. ５ 3.3 GENERAL TEST PROCEDURES ...................................................................................................... ５ 3.4 DESCRIPTION OF TEST MODES ..................................................................................................... ５ 4. INSTRUMENT CALIBRATION..................................................................................................................... ６ 5. FACILITIES AND ACCREDITATIONS ......................................................................................................... ６ 5.1 FACILITIES ......................................................................................................................................... ６ 5.2 EQUIPMENT ....................................................................................................................................... ６ 6. ANTENNA REQUIREMENTS ...................................................................................................................... ７ 7. SUMMARY TEST OF RESULTS ................................................................................................................. ８ 8. TEST RESULT ............................................................................................................................................. ９ 8.1 6dB BANDWIDTH MEASUREMENT ................................................................................................. ９ 8.2 OUTPUT POWER MEASUREMENT .............................................................................................. １２ 8.3 POWER SPECTRAL DENSITY ...................................................................................................... １８ 8.4 OUT OF BAND EMISSIONS AT THE BAND EDGE/ CONDUCTED SPURIOUS EMISSIONS ... ２２ 8.5 RADIATED MEASURE…

Text truncated - open the document above for the full version.