KA2CS8301LHA1Full HD Wi-Fi Camera

DCS-8300LHV2 User Manual Full HD Wi-Fi Camera Hardware: A1 Manual Version: 1.00 08/18/2020 iD-Link DCS-8300LHV2 User Manual D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and change. Please refer to the www.mydlink.com website for the most current information. Manual Overview Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Copyright © 2020 by D-Link Corporation, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc. Manual Revisions RevisionDateDescription 1.00August 18, 2020Initial release iiD-Link DCS-8300LHV2 User Manual Table of Contents Table of Contents Product Overview ..............................................................1 Package Contents .........................................................................1 Introduction ...................................................................................2 System Requirements .................................................................2 Hardware Overview .....................................................................3 Front ..........................................................................................3 Back............................................................................................4 LED Behavior ..........................................................................5 Installation .........................................................................6 Safety ................................................................................................6 Before you Begin ...........................................................................6 Wireless Installation Considerations ......................................7 mydlink App Camera Setup ......................................................8 Device Placement .......................................................................10 Mounting the Camera...............................................................11 Using the mydlink App ....................................................14 Controlling Your Device ...........................................................14 Device Settings ............................................................................15 Troubleshooting ..............................................................17 Technical Specifications ..................................................18 Regulatory Information ..................................................20 1D-Link DCS-8300LHV2 User Manual Section 1 - Product Overview Product Overview Package Contents If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with your product will cause damage and void the warranty for this product. Full HD Wi-Fi Camera Mounting Hardware Quick Installation Guide MicroUSB Power Adapter 2D-Link DCS-8300LHV2 User Manual Section 1 - Product Overview Introduction No more struggles to find the perfect angle, the DCS-8300LHV2 lets you adjust your camera a full 360-degrees. With vivid Full HD 1080p resolution @ 30 frames per second, you’ll never miss a moment, and what’s more – built-in AI-based Person Detection cleverly identifies human motion, so you only get alerts when it matters most. Enhanced sound and motion detection help with the heavy lifting and with built-in Bluetooth Low Energy (BLE) technology — it’s one of our easiest cameras to setup yet! System Requirements Network Requirements • 10/100 Ethernet network or 802.11n/g wireless network • An Internet connection • A router connected to your broadband modem mydlink™ App Requirements • iOS or Android device (please refer to the mobile app's store page to check whether your device is compatible) • Email account (for mydlink service registration) 3D-Link DCS-8300LHV2 User Manual Section 1 - Product Overview Hardware Overview Front Light Sensor The IR-Cut removable sensor monitors lighting conditions and switches between color and infrared accordingly. Status LEDSee LED Behavior on page 5 for more information. Camera LensRecords video of the surrounding area. MicrophonePicks up sound near your camera. microSD Card SlotmicroSD card slot, supports up to 256 GB. Light Sensor Status LED Microphone Camera Lens microSD Card Slot 360° Rotating Stand 4D-Link DCS-8300LHV2 User Manual Section 1 - Product Overview Back SpeakerProvides audio playback for the two-way audio feature. Reset ButtonHold the recessed button down to reset the camera to factory default settings. Power ConnectorAttach your power adapter to this port to supply power to the device. Reset Button Power Connector Speaker 5D-Link DCS-8300LHV2 User Manual Section 1 - Product Overview LED Behavior Status LED Connected to the network and mydlink. Booting up. Ready for set up. Firmware being updated - do not power off. Status LED 6D-Link DCS-8300LHV2 User Manual Section 2 - Installation Please read all of the safety and operating instructions before using device: • Do not open the device or attempt to repair it. • Do not submerge the device in liquid or attempt to clean it with liquids or solvents. To clean the device, disconnect it from the power outlet and use a damp towel to gently wipe it down. Before you Begin Plan the location of your camera: • Verify that your camera is electrically rated to operate with the power available in your location. • Connect the camera's power adapter into an electrical outlet that is not controlled by a wall switch. …

Text truncated - open the document above for the full version.

The test data, data evaluation, and equipment configuration contained in our test report(s) above was (were) obtained utilizing the test procedures, test instruments, test sites that has been accredited according to the ISO/IEC 17025 quality assessment standard and technical standard(s). The test data contained in the referenced test report relate only to the EUT sample and item(s) tested. Ryan Wang Authorized Signatory BTL INC. No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China TEL: +86-021-61765666 TECHNICAL COMPLIANCE STATEMENT This is to certify that the product listed in follows was (were) tested in the BTL EMC Laboratory to comply with below FCC official limits. Equipment Full HD Wi-Fi Camera Brand Name D-Link Model Name DCS-8301LH Applicant D-Link Corporation Address 17595 Mt. Herrmann, Fountain Valley, California United State 92708 Standard(s) FCC CFR Title 47,Part 15,Subpart B,Class B ANSI C63.4-2014 Report(s) BTL-FCCE-1-2007H016

Project No.: 2007H016 Page 1 of 18 ATTACHMENT PHOTOGRAPHS OF EUT Project No.: 2007H016 Page 2 of 18 Project No.: 2007H016 Page 3 of 18 Project No.: 2007H016 Page 4 of 18 Adapter: KA0601A-0501200DEU Project No.: 2007H016 Page 5 of 18 Project No.: 2007H016 Page 6 of 18 Adapter: KA06E-0501200US Project No.: 2007H016 Page 7 of 18

Label Label location

Project No.: 2007H016 Page 8 of 18 Project No.: 2007H016 Page 9 of 18 Project No.: 2007H016 Page 10 of 18 Project No.: 2007H016 Page 11 of 18 Project No.: 2007H016 Page 12 of 18 Project No.: 2007H016 Page 13 of 18 Project No.: 2007H016 Page 14 of 18 Project No.: 2007H016 Page 15 of 18 Project No.: 2007H016 Page 16 of 18 Project No.: 2007H016 Page 17 of 18 Ant. (2.4G WIFI /B T/BLE Project No.: 2007H016 Page 18 of 18

Report No.: BTL-FCCP-4-2007H016 Page 1 of 3 FCC RF EXPOSURE REPORT FCC ID: KA2CS8301LHA1 Project No. : 2007H016 Equipment : Full HD Wi-Fi Camera Brand Name : D-Link Test Model : DCS-8301LH Series Model : N/A Applicant : D-Link Corporation Address : 17595 Mt. Herrmann，Fountain Valley，California United State 92708 Manufacturer : SHENZHEN AONI ELECTRONIC CO., LTD Address : No.5, Bldg., Honghui Industrial Park, 2nd Liuxian, Xin'an, Bao'an District, Shenzhen, China Date of Receipt : Jul. 03, 2020 Date of Test : Jul. 03, 2020~Aug. 7, 2020 Issued Date : Aug. 13, 2020 Report Version : R00 Test Sample : Engineering Sample No.: SH2020070323 Standard(s) : FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 FCC Title 47 Part 2.1091, OET Bulletin 65 Supplement C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Krain Wu Approved by : Ryan Wang Add: No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China TEL: +86-021-61765666 Web: www.newbtl.com Report No.: BTL-FCCP-4-2007H016 Page 2 of 3 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue Aug. 13, 2020 1. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Table for Filed Antenna For 2.4G、BT and BLE: Ant. Brand Model Name Antenna Type Connector Gain(dBi) Note 1 UB UB01C90F2D1473A FPC RF Cable 3.14 - Report No.: BTL-FCCP-4-2007H016 Page 3 of 3 2. TEST RESULTS For 2.4GHz: Antenna Gain (dBi) Antenna Gain (numeric) Max. tune up Power (dBm) Max. tune up Power (mW) Power Density (S) (mW/cm2) Limit of Power Density (S) (mW/cm2) Test Result 3.14 2.0606 25.50 354.8134 0.14550 1 Complies For BT : Antenna Gain (dBi) Antenna Gain (numeric) Max. tune up Power (dBm) Max. tune up Power Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 3.14 2.0606 7.00 5.0119 0.00120 1 Complies For BLE : Antenna Gain (dBi) Antenna Gain (numeric) Max. tune up Power (dBm) Max. tune up Power Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 3.14 2.0606 3.50 2.2387 0.00092 1 Complies Note: The calculated distance is 20 cm. Output power including tune up tolerance. End of Test Report

Report No.:BTL-FCCP-3-2007H016 Page 1 of 81 FCC Radio Test Report FCC ID: KA2CS8301LHA1 This report concerns: Original Grant Project No. : 2007H016 Equipment : Full HD Wi-Fi Camera Brand Name : D-Link Test Model : DCS-8301LH Series Model : N/A Applicant : D-Link Corporation Address : 17595 Mt. Herrmann, Fountain Valley, California United State 92708 Manufacturer : SHENZHEN AONI ELECTRONIC CO., LTD Address : No.5, Bldg., Honghui Industrial Park, 2nd Liuxian, Xin'an, Bao'an District, Shenzhen, China Date of Receipt : Jul. 03, 2020 Date of Test : Jul. 03, 2020~Aug. 7, 2020 Issued Date : Aug. 13, 2020 Report Version : R00 Test Sample : Engineering Sample No.: SH2020070323 Standard(s) : FCC Part15, Subpart C (15.247) ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance V05r02 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Krain Wu Approved by : Ryan Wang Add: No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China TEL: +86-021-61765666 Web: www.newbtl.com Report No.:BTL-FCCP-3-2007H016 Page 2 of 81 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, A2LA, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.:BTL-FCCP-3-2007H016 Page 3 of 81 Table of Contents Page REPORT ISSUED HISTORY 6 1 . SUMMARY OF TEST RESULTS 7 1.1 TEST FACILITY 8 1.2 MEASUREMENT UNCERTAINTY 8 1.3 TEST ENVIRONMENT CONDITIONS 8 2 . GENERAL INFORMATION 9 2.1 GENERAL DESCRIPTION OF EUT 9 2.2 DESCRIPTION OF TEST MODES 11 2.3 PARAMETERS OF TEST SOFTWARE 12 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 2.5 SUPPORT UNITS 12 3 . AC POWER LINE CONDUCTED EMISSIONS TEST 13 3.1 LIMIT 13 3.2 TEST PROCEDURE 13 3.3 DEVIATION FROM TEST STANDARD 13 3.4 TEST SETUP 14 3.5 EUT OPERATING CONDITIONS 14 3.6 TEST RESULTS 14 4 . RADIATED EMISSION TEST 15 4.1 LIMIT 15 4.2 TEST PROCEDURE 16 4.3 DEVIATION FROM TEST STANDARD 16 4.4 TEST SETUP 17 4.5 EUT OPERATING CONDITIONS 18 4.6 TEST RESULTS - 9 KHZ TO 30 MHZ 18 4.7 TEST RESULTS - 30 MHZ TO 1000 MHZ 18 4.8 TEST RESULTS - ABOVE 1000 MHZ 18 5 . NUMBER OF HOPPING FREQUENCY 19 5.1 LIMIT 19 5.2 TEST PROCEDURE 19 5.3 DEVIATION FROM STANDARD 19 5.4 TEST SETUP 19 5.5 EUT OPERATION CONDITIONS 19 Report No.:BTL-FCCP-3-2007H016 Page 4 of 81 Table of Contents Page 5.6 TEST RESULTS 19 6 . AVERAGE TIME OF OCCUPANCY 20 6.1 LIMIT 20 6.2 TEST PROCEDURE 20 6.3 DEVIATION FROM STANDARD 20 6.4 TEST SETUP 20 6.5 EUT OPERATION CONDITIONS 20 6.6 TEST RESULTS 20 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 21 7.1 LIMIT 21 7.2 TEST PROCEDURE 21 7.3 DEVIATION FROM STANDARD 21 7.4 TEST SETUP 21 7.5 EUT OPERATION CONDITIONS 21 7.6 TEST RESULTS 21 8 . BANDWIDTH TEST 22 8.1 LIMIT 22 8.2 TEST PROCEDURE 22 8.3 DEVIATION FROM STANDARD 22 8.4 TEST SETUP 22 8.5 EUT OPERATION CONDITIONS 22 8.6 TEST RESULTS 22 9 . MAXIMUM OUTPUT POWER & E.I.R.P. TEST 23 9.1 LIMIT 23 9.2 TEST PROCEDURE 23 9.3 DEVIATION FROM STANDARD 23 9.4 TEST SETUP 23 9.5 EUT OPERATION CONDITIONS 23 9.6 TEST RESULTS 23 10 . CONDUCTED SPURIOUS EMISSION 24 10.1 LIMIT 24 10.2 TEST PROCEDURE 24 10.3 DEVIATION FROM STANDARD 24 10.4 TEST SETUP 24 Report No.:BTL-FCCP-3-2007H016 Page 5 of 81 Table of Contents Page 10.5 EUT OPERATION CONDITIONS 24 10.6 TEST RESULTS 24 11 . MEASUREMENT INSTRUMENTS LIST 25 12 EUT TEST PHOTO 27 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 30 APPENDIX B - RADIATED EMISSION - 9 KHZ-30 MHZ 33 APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1000 MHZ 34 APPENDIX D - RADIATED EMISSION - ABOVE 1000 MHZ 37 APPENDIX E - NUMBER OF HOPPING FREQUENCY 62 APPENDIX F - AVERAGE TIME OF OCCUPANCY 64 APPENDIX G - HOPPING CHANNEL SEPARATION MEASUREMENT 69 APPENDIX H - BANDWIDTH 72 APPENDIX I - MAXIMUM OUTPUT POWER & E.I.R.P. 75 APPENDIX J - CONDUCTED SPURIOUS EMISSION 77 Report No.:BTL-FCCP-3-2007H016 Page 6 of 81 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue. Aug. 13, 2020 Report No.:BTL-FCCP-3-2007H016 Page 7 of 81 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC Part15, Subpart C (15.247) Standard(s) Section Test Item Test Result Judgment Remark 15.207 AC Power Lin…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-1-2007H016 Page 26 of 99 10. EUT TEST PHOTO Conducted Emissions Test Photos Report No.: BTL-FCCP-1-2007H016 Page 27 of 99 Radiated Emissions Test Photos 30 MHz to 1 GHz Report No.: BTL-FCCP-1-2007H016 Page 28 of 99 Radiated Emissions Test Photos Above 1 GHz