KE3-3001103REMOTE TRAINER WITH VIBRATION PLUS

PetSafe ® Remote Training with Vibration Operating and Training Guide Please read this entire guide before beginning. PDT00-12892 (Remote Trainer with Vibration) PDT00-12894 (Remote Trainer with Vibration PLUS ) PAC00-12893 (Add-A-Dog ® Collar with Vibration) PAC00-12914 (Add-A-Dog ® Collar with Vibration PLUS ) 2 Customer Care Center 1-800-732-2677 Important Safety Information Explanation of Attention Words and Symbols used in this guide This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. CAUTION, used without the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in harm to your pet. Not for use with aggressive dogs. Do not use this Product if your dog is aggressive, or if your dog is prone to aggressive behavior. Aggressive dogs can cause severe injury and even death to their owner and others. If you are unsure whether this product is appropriate for your dog, please consult your veterinarian or certified trainer. The PetSafe ® Remote Trainer is not a toy. Keep away from the reach of children. Use it only for its training purpose. Risk of skin damage. Please read and follow the instructions in this manual. Proper fit of the collar is important. A collar worn for too long or made too tight on the pet’s neck may cause skin damage. Ranging from redness to pressure ulcers; this condition is commonly known as bed sores. • Avoid leaving the collar on the dog for more than 12 hours per day. • When possible reposition the collar on the pet’s neck every 1 to 2 hours. • Check the fit to prevent excessive pressure; follow the instructions in this manual. • Never connect a lead to the electronic collar; it will cause excessive pressure on the contacts. • When using a separate collar for a lead, don’t put pressure on the electronic collar. • Wash the dog’s neck area and the contacts of the collar weekly with a damp cloth. • Examine the contact area daily for signs of a rash or a sore. • If a rash or sore is found, discontinue use of the collar until the skin has healed. • If the condition persists beyond 48 hours, see your veterinarian. • For additional information on bed sores and pressure necrosis, please visit our website. These steps will help keep your pet safe and comfortable. Millions of pets are comfortable while they wear stainless steel contacts. Some pets are sensitive to contact pressure. You may find after some time that your pet is very tolerant of the collar. If so, you may relax some of these precautions. It is important to continue daily checks of the contact area. If redness or sores are found, discontinue use until the skin has fully healed. The PetSafe ® Remote Trainers must be used only on healthy dogs. We recommend that you take your dog to a veterinarian before using the collar if he is not in good health. www.petsafe.net 3 Table of Contents Components ..............................................................................................4 How the System Works ...............................................................................4 Features .....................................................................................................4 Key Definitions ..........................................................................................5 Operating Guide ......................................................................................7 Prepare the Handheld Transmitter ...........................................................7 Prepare the Receiver Collar .....................................................................8 Fit the Receiver Collar .............................................................................9 Pairing the Receiver Collar for One Dog Operation .................................10 Pairing the Receiver Collar for Two Dog Operation ..................................10 Accessories ...........................................................................................11 Training Guide .......................................................................................12 Testing the Remote Trainer .....................................................................12 Find the Best Vibration or Static Stimulation Level for Your Pet................12 General Tips ..........................................................................................13 Dog Training Recommendations .............................................................13 Teaching Basic Obedience ......................................................................14 Eliminating Unwanted Behavior .............................................................16 Frequently Asked Questions ..................................................................20 Troubleshooting ......................................................................................21 Test Light Instructions for PDT00-12894 and PAC00-12914 ....................21 Terms of Use and Limitation of Liability ....................................................22 FCC .........................................................................................................22 Customer Care International .....................................................................23 Thank you for choosing the PetSafe ® brand. You and your pet deserve a companionship that includes memorable moments and a shared understanding together. Our products and training tools promote a lifestyle of protection, teaching, and love—essentials that influence memories for a lifetime. If you have any questions about our products or training your pet, please visit our website at www.petsafe.net or contac…

Text truncated - open the document above for the full version.

Radio Systems Corp Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: KE3-3001103. Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Schematics Block Diagram Operational Description KE3-3001103_SCH.pdf KE3-3001103_BlockDiagram.pdf KE3-3001103_CircuitDescription.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Clifton P. Brick

Radio Systems Corporation FCC ID: KE3-3001103 POWER OF ATTORNEY October 31, 2011 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) on our behalf shall have the same effect as acts of our own. This authorization expires on October 30, 2012. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Radio Systems Corporation, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Radio Systems Corporation ------------------ Clifton P. Brick

2.1 Product View 2.2 EUT – Appearence View

Page:23 of 23 Radio Systems Corporation FCC ID: KE3-3001103 WALTEK SERVICES Reference No.: WT11105939-E-E-F 12 FCC Label The Label must not be a stick-on paper. The Label on these products must be permanently affixed to the product and readily visible at the time of purchase and must last the expected lifetime of the equipment not be readily detachable. Proposed Label Location on EUT EUT Bottom View/ proposed FCC Label Location FCC ID: KE3-3001103

FCC ID Label Sample for Model: RFA-460, RFA-462

2.1 EUT – Open View 2.2 EUT – PCB View

VT3 SCHM-600-480PCBA-R#03.sch R#03 26-OCT-10 26-OCT-10 P. Johnson M. Strong 100-1042 SCHM-600-480PCBA Unleashed Transmitter RSC 2010 ECO/PRO 1 A B C D 1 2 3 THIS DRAWING IS THE PROPERTY OF AND PROPRIETARY TO RADIO SYSTEMS SHALL NOT BE REPRODUCED NOR DISCLOSED TO ANYONE EXCEPT THOSE CORPORATION. THIS DRAWING AND THE INFORMATION CONTAINED HEREIN REQUIRING IT'S USE FOR RSC AUTHORIZED PURPOSES. THIS DOCUMENT SHALL BE DESTROYED OR RETURNED TO RSC WHEN NO LONGER REQUIRED FOR THESE PURPOSES. 4 5 6 RADIO SYSTEMS CORPORATION 10427 Electric Ave. - Knoxville, TN 37932-3369 - (865)777-5404 D REV: FILE NAME: B SIZE: DATED: DRAWN: ENGINEER: C COPYRIGHT DATED: SHEET: 1 OF: 1 C B A 6 REVISION RECORD DESCRIPTION REV DATE BY 5 4 3 2 RSC NUMBER: BOARD NUMBER: SCHEMATIC TITLE: COMPANY CONFIDENTIAL MLS MM/DD/YYYY Release to Production R000 RSCXXX 2 B 1 E 3 C Q1 2SA1577 103-130 2 B 1 E 3 C Q2 2SA1577 103-130 2 B 1 E 3 C Q3 2SA1577 103-130 1 G 2 S 3 D Q4 BSS138N 103-131 1 G 2 S 3 D Q5 BSS138N 103-131 R1 10R 5% 101-509 R2 2K2 5% 101-151 R3 10K 5% 101-534 R4 100K 5% 101-140 R5 100K 5% 101-140 R6 100K 5% 101-140 R7 24K 5% 101-878 R9 100K 5% 101-140 C1 100N 102-383 16V R10 15K 5% 101-611 R11 4K7 5% 101-591 R12 1M 5% 101-165 R13 100K 5% 101-140 R14 100K 5% 101-140 1 A 2 K D2 NSR0320MW2T1 104-170 1 A 2 K D3 NSR0320MW2T1 104-170 C3 1U 102-507 16V C4 100N 102-383 16V C5 2U2 102-483 16V 1 2 D1 CCLM0750 104-172 1 2 J2 22-03-5025 108-243 TP6 CONTROL TP7 CONTROL C23 1U 102-431 6V3 R17 2K7 5% 101-647 C9 1000P 102-122 25V C11 1000P 102-122 25V C12 1000P 102-122 25V 1 B 2 E 3 C Q8 3904 103-067 C15 150P 102-489 50V R24 2K7 5% 101-647 R25 27K 5% 101-613 1 B 2 E 3 C Q9 3904 103-067 C16 220P 102-488 50V R26 2K7 5% 101-647 R28 330R 5% 101-539 L3 1U2 112-008 C17 1000P 102-122 25V C18 220P 102-488 50V L4 270N 112-005 R29 100R 5% 101-531 1 B 3 E 2 C Q10 2SC4272 103-036 C19 100N 102-383 16V R30 560R 5% 101-665 L5 1U5 112-003 C20 1000P 102-122 25V C21 68P 102-328 25V L6 470N 112-006 R31 100R 5% 101-184 C22 100P 102-164 50V L7 330N 112-004 L8 820N 112-007 C25 150P 102-113 50V C26 39P 102-171 50V ANT1 1400001-20LF 1 2 J1 NO_POP 1 A1 2 A2 3 K D4 NSR30CM3T5G 104-171 1 A1 2 A2 3 K D5 NSR30CM3T5G 104-171 1 A1 2 A2 3 K D6 NSR30CM3T5G 104-171 1 A1 2 A2 3 K D7 NSR30CM3T5G 104-171 R15 220R 5% 101-007 R16 220R 5% 101-007 1 4 3 2 5 SW1 TD-07XB 107-085 1 4 3 2 5 SW2 TD-07XB 107-085 1 4 3 2 5 SW3 TD-07XB 107-085 1 2 3 4 SW5 TC-0241Z 107-054 R32 10K 1% 101-578 R33 10K 1% 101-578 R34 10K 1% 101-578 R35 10K 1% 101-578 R36 10K 1% 101-578 R37 10K 1% 101-578 R38 10K 1% 101-578 R39 10K 1% 101-578 1 1 2 C 3 2 4 4 5 C 6 8 SW4 GRAY CODE SW 107-061 NO_POP R23 22R 1% 101-958 MH1 5.3mm MH2 5.3mm 1 VCON 2 EOH 3 GND 4 OUT 5 EOH 6 VCC X1 27.145MHZ 111-047 2 VIN 1 GND 5 ON/OFF 4 NC 3 VOUT U2 505-291 S-812C33BMC 1 G 2 S 3 D Q6 2N7002K 103-122 C6 100N 102-383 16V C7 TBD 102-XXX NO_POP C8 TBD 102-XXX NO_POP C2 10N 102-385 25V TP1 VDD TP2 TX_EN TP3 TX_IN TP4 VCXO_OUT TP5 STG2 TP8 STG3 TP9 SW1 TP10 SW2 TP11 SW3 TP12 SW4 1 RA2/AN2/VREF 2 RA3/AN3/CMP1 3 RA4/T0CKI/CMP2 4 RA5/MCLR/VPP 5 VSS 6 VSS 7 RB0/INT 8 RB1/RX/DT 9 RB2/TX/CK 10 RB3/CCP1 11 RB4/PGM 12 RB5 13 RB6/T1OSO/T1CKI/PGC 14 RB7/T1OSI/PGD 15 VDD 16 VDD 17 RA6/OSC2/CLKOUT 18 RA7/OSC1/CLKIN 19 RA0/AN0 20 RA1/AN1 U1 PIC16F648A 500-292 1 DATA 2 CLOCK 3 VPP 4 VDD 5 VSS TP13 PROGRAM TP14 TXD 1 A 2 K LD2 LTST-C191KGKT 104-100 1 A 2 K LD1 LTST-C191KRKT 104-101 R8 200K 1% 101-959 R19 12K 1% 101-741 R20 22K 1% 101-743 R18 47K 1% 101-663 L1 0R 1% 101-957 L2 2U2 112-050 VDD VDD BATT VDD TX_EN TX_EN CHARGE VDD BATT VDD

Page: 1 of 24 FCC TEST REPORT WALTEK SERVICES Reference No.: WT11105939-E-E-F FCC ID : KE3-3001103 Applicant : Radio Systems Corporation Address : 10427 Electric Ave.Knoxville, TN 37932 USA Equipment Under Test (EUT) : Product Name : Remote Trainer with Vibration PLUS Model No. : RFA-462, RFA-460 Standards : FCC CFR47 Part 95:2009 Date of Test : October 28, 2011 ~ October 30, 2011 Date of Issue : October 31, 2011 Test Engineer : Hunk yan Reviewed By : Philo zhong Test Result : PASS Prepared By: Waltek Services (Shenzhen) Co., Ltd. 1/F, Fukangtai Building, West Baima Rd., Songgang Street, Baoan District, Shenzhen 518105, China Tel :+86-755-27553488 Fax:+86-755-27553868 — The sample detailed above has been tested to the requirements of Council Directives TIA/EIA- 603-2004. The test results have been reviewed against the Directives above and found to meet their essential requirements. Page:2 of 24 Radio Systems Corporation FCC ID: KE3-3001103 WALTEK SERVICES Reference No.: WT11105939-E-E-F 2 Test Summary Test Items Test Requirement Test Method Result Emission Bandwidth 95.633 TIA/EIA-603-2004 PASS Frequency Stability 95.623 TIA/EIA-603-2004 PASS Maximum transmitter power 95.639 TIA/EIA-603-2004 PASS Unwanted radiation 95.635 TIA/EIA-603-2004 PASS Conducted Emission 15.107 ANSI C63.4:2003 PASS Page:3 of 24 Radio Systems Corporation FCC ID: KE3-3001103 WALTEK SERVICES Reference No.: WT11105939-E-E-F 3 Contents Page 1 COVER PAGE ........................................................................................................................................................ 1 2 TEST SUMMARY .................................................................................................................................................. 2 3 CONTENTS............................................................................................................................................................. 3 4 GENERAL INFORMATION ................................................................................................................................ 4 4.1 CLIENT INFORMATION........................................................................................................................................... 4 4.2 GENERAL DESCRIPTION OF E.U.T. ........................................................................................................................ 4 4.3 DETAILS OF E.U.T................................................................................................................................................. 4 4.4 DESCRIPTION OF SUPPORT UNITS.......................................................................................................................... 4 4.5 STANDARDS APPLICABLE FOR TESTING................................................................................................................ 4 4.6 TEST FACILITY...................................................................................................................................................... 5 4.7 TEST LOCATION.................................................................................................................................................... 5 5 EQUIPMENT USED DURING TEST .................................................................................................................. 6 6 CONDUCTED EMISSIONS.................................................................................................................................. 7 6.1 E.U.T. OPERATION................................................................................................................................................ 7 6.2 EUT SETUP........................................................................................................................................................... 8 6.3 CONDUCTED EMISSION TEST RESULT................................................................................................................... 9 6.4 PHOTOGRAPH – CONDUCTED EMISSION TEST SETUP.......................................................................................... 11 7 MAXIMUM TRANSMITTER POWER ............................................................................................................ 12 7.1 TEST EQUIPMENT................................................................................................................................................ 12 7.2 TEST RESULT....................................................................................................................................................... 12 8 UNWANTED RADIATION................................................................................................................................. 13 8.1 TEST EQUIPMENT................................................................................................................................................ 13 8.2 TEST SETUP......................................................................................................................................................... 13 8.3 TEST PROCEDURE................................................................................................................................................ 14 8.4 TEST RESULT....................................................................................................................................................... 15 8.5 PHOTOGRAPH – RADIATION EMISSION TEST SETUP............................................................................................ 17 9 EMISSION BANDWIDTH .................................................................................................................................. 18 9.1 TEST EQUIPMENT................................................................................................................................................ 18 9.2 TEST RESULT..................................................................…

Text truncated - open the document above for the full version.

2.1 Photograph – Conducted Emission Test Setup 2.2 Photograph – Radiation Emission Test Setup Below 30MHz Above 30MHz