KE3-PIF150-2Stay & Play Wireless Fence

Stay & Play ® Wireless Fence with Replaceable Battery Collar Congratulations on your purchase! Scan the QR code to access quick start guides, support videos and live chat. Your product comes with a 1-year limited warranty. Scan to access the quick start guide Wireless Fences We’re here to help. Access our Product Support Site 24/7 Contact our U.S.-Based Customer Care Scan to access quick start guides, support videos & live chat at support.petsafe.com We’re happy to help via phone during business hours at 1-800-732-2677 KEEP THIS INSERT FOR FUTURE REFERENCE 400-2798PIF00-15001 Get Started! 2 Help keep your best friend safe on their home turf. Stay & Play ® Wireless Fence with Replaceable Battery Collar Before we begin As you set up your new wireless fence, keep in mind: This product creates a wireless play area for your pet to explore. The transmitter emits a radio signal in a 5- to 105-foot radius in all directions, creating a circular boundary called the pet area. Small flags will visually reinforce where the boundary zone is. Once your dog is properly trained, you will be able to remove the flags and allow your dog to roam freely in the pet area. If your dog roams outside the pet area, the receiver collar sounds a warning tone, then delivers a static correction through the contact points. The correction is designed to get your dog’s attention and prompt them to return to the safety of the pet area. It may take a few tries to set up your transmitter. The transmitter is the source of the radio signal and will always be at the exact center of the pet area. It should be placed off the floor in your home, away from any large metal objects. You may need to move the transmitter a few times before you find the best spot. It is important to help keep your pet comfortable and safe. Important: • Avoid leaving the receiver collar on your dog for more than 12 hours a day. Before beginning, please read this guide and the Let us help! guide thoroughly for important safety information about how to fit and use the receiver collar. • Tak e care to choose the best correction level for your pet’s temperament. Many dogs respond well to tone-only correction after proper training. This product limits static correction duration to 15 seconds to prevent over-correction. In the unlikely event your pet leaves the pet area, they will not receive a static correction upon their return. Training time may vary from pet to pet. Properly training your pet is essential to the success of the wireless fence. The online training guide will walk you through our recommended training method. 3 What you have What you need • Screwdriver • Scissors • Lighter • Tape measur e • Non-metallic collar and leash Receiver collar with short contact points RFA-67 battery Test light tool Long contact points Transmitter power adaptor Flags Transmitter 4 Locate the battery on the underside of the receiver collar. The arrow on the battery should be lined up with the triangle on the receiver collar. In this position, the battery is installed but is not yet locked in place. This prevents the battery from draining prior to purchase. Important: Always remove the receiver collar from your pet before installing or replacing the battery. Using the edge of the test light tool, rotate the battery clockwise until the arrow on the battery lines up with the lock symbol on the receiver collar. The battery is now locked in place and powering the receiver collar. 12 5 Turn the receiver collar on by pressing and holding the mode button for 5 seconds. The indicator light will glow for 5 seconds (green or red to indicate battery status), and then will emit a series of red flashes representing the current static correction level. To determine the correction level, press the mode button once and then count the red flashes (1 flash = level 1, 2 flashes = level 2, and so on). To increase the correction level, press the mode button once to view the current correction level, then press the mode button again within 5 seconds. Each time you press the mode button within 5 seconds of the previous set of flashes, the correction level increases by one. The levels increase from 1 to 6, and then start over at 1. We recommend setting the correction to level 2 (low static) or above for setup. 34 Mode button Indicator lightMeaning Green, 5 seconds continuous or slow blinking (every 4 to 5 seconds) The battery has sufficient charge. Red, 5 seconds continuous or slow blinking (every 4 to 5 seconds) The battery charge is low; replace the battery. Red, quick flashingThe number of flashes reveals the current correction level: 1 flash = Tone only 2 flashes = Low static 3 flashes = Med-low static 4 flashes = Medium static 5 flashes = Med-high static 6 flashes = High static 6 56 If your neighbors use an in-ground fence system or robotic lawn mower, you may need to reduce the pet area or move the transmitter to minimize interference. Make sure the transmitter is: • On the ground level of your home, in a dry, well-ventilated area where temperatures do not go below 15°F or above 104°F. • At least 2 feet above the floor, mounted to a wall or placed on a non-metal table or other hard surface to ensure proper ventilation. • At least 3 feet from any large metal objects; these may affect the size and shape of the pet area. Placing the transmitter in a metal building, shed, or home with a metal roof can reduce its maximum range. Plug the power adaptor into a wall outlet, then insert the other end into the power jack on the underside of the transmitter. B O U N D A R Y Pet area Transmitter 1 2 3 7 1 2 3 1 2 3 78 At the back of the transmitter, slide the power switch to the on (l) position. The light on the front of the transmitter glows blue when the transmitter is powered on and functioning correctly. Referring to the table below, set the boundary switch and boundary control dial as needed to achieve the desired pet area radius: You can determine this radius by measuring the distance between t…

Text truncated - open the document above for the full version.

Radio Systems Corp Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: April 20, 2026 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: KE3-PIF150-2 Radio Systems Corp certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information: FRN: 0014529481 Name: Radio Systems Corp Address: 10427 PetSafe Way, Knoxville, TN 37932 Contact Person: Jennifer Bleasdale Tel.: 865.321.1895 Email: [email protected] Sincerely, Jennifer Bleasdale Regulatory Compliance Specialist

FCC ID: KE3-PIF150-2

Appendix-RFA-554B-Photos Model RFA-554B, PIF-150, PIF00-15001 FCC ID: KE3-PIF150-2 Reference No.: WTD26D01029212W Page 3 of 10 2. Photographs –Constructional Details 2.1. EUT – External View Appendix-RFA-554B-Photos Model RFA-554B, PIF-150, PIF00-15001 FCC ID: KE3-PIF150-2 Reference No.: WTD26D01029212W Page 4 of 10 Appendix-RFA-554B-Photos Model RFA-554B, PIF-150, PIF00-15001 FCC ID: KE3-PIF150-2 Reference No.: WTD26D01029212W Page 5 of 10 Appendix-RFA-554B-Photos Model RFA-554B, PIF-150, PIF00-15001 FCC ID: KE3-PIF150-2 Reference No.: WTD26D01029212W Page 6 of 10 Appendix-RFA-554B-Photos Model RFA-554B, PIF-150, PIF00-15001 FCC ID: KE3-PIF150-2 Reference No.: WTD26D01029212W Page 7 of 10

75mm 75mm Place serial label 402-13988 in this area 1. Print artwork as shown 2. Place serial label 402-13988 in area indicated 3. Do not print lines or dimensions (for reference only) 4. Tolerance +/- 0.1mm 5. Scale: 1 to 1 MOD: RFA-554B FOR USE ONLY WITH WIRELESS FENCE RECEIVERS WARNING: Risk of fire or electric shock. Install transmitter indoors. Do not expose to rain. Connect only to 19VDC 1.26A power adapter. This device complies with Industry Canada license-exempt RSS standard(s). This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. UTILISER SEULEMENT AVEC LES COLLIERS RÉCEPTEURS SANS FIL AVERTISSEMENT: Risque d'incendie ou de choc électrique. Le transmettre doit être installé à l'intérieur et ne doit pas être exposé à la pluie. Pour les connexions d'alimentation, seul un transformateur de 19VDC 1.26A . Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. Cet appareil est conforme à la partie 15 des règles FCC. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Radio Systems Corporation FCC ID: KE3-PIF150-2 IC: 2721A-PIF1502 402-15747/3

Appendix-RFA-554B-Photos Model RFA-554B, PIF-150, PIF00-15001 FCC ID: KE3-PIF150-2 Reference No.: WTD26D01029212W Page 8 of 10 2.2. EUT – Internal View Appendix-RFA-554B-Photos Model RFA-554B, PIF-150, PIF00-15001 FCC ID: KE3-PIF150-2 Reference No.: WTD26D01029212W Page 9 of 10 ANT ANT Appendix-RFA-554B-Photos Model RFA-554B, PIF-150, PIF00-15001 FCC ID: KE3-PIF150-2 Reference No.: WTD26D01029212W Page 10 of 10 ======End======

Waltek Testing Group Co., Ltd. http://www.waltek.com.cn Page 1 of 12 TEST REPORT Reference No. .................... : WTD26D01029212W002 FCC ID ................................ : KE3-PIF150-2 Applicant ............................ : Radio Systems Corp Address .............................. : 10427 PetSafe Way, Knoxville, TN 37932 USA Manufac turer .................... : Radio Systems Corp Address .............................. : 10427 PetSafe Way, Knoxville, TN 37932 USA Product ............................... : S tay & Play Wireless Fence Model(s). ............................ : RFA-554B, PIF-150, PIF00-15001 Standards........................... : FCC 47CFR Part 1.1307 Date of Receipt Sample .... : 2026-03-23 Date of Test ....................... : 2026-03-26 to 2026-04-09 Date of Issue ...................... : 2026-06-10 Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group Co., Ltd. Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China Tel: +86-769-2267 6998 Fax: +86-769-2267 6828 Compiled by: Approved by: Frank Yin / Project Engineer Deval Qin / Designated Reviewer Reference No.: WTD26D01029212W002 Page 2 of 12 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 2 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 CONTENTS ............................................................................................................................................................ 2 3 REVISION HISTORY ............................................................................................................................................ 3 4 GENERAL INFORMATION .................................................................................................................................. 4 4.1 GENERAL DESCRIPTION OF E.U.T ............................................................................................................. 4 4.2 DETAILS OF ACCESSORIES ......................................................................................................................... 4 4.3 TEST FACILITY ............................................................................................................................................ 5 4.4 SUBCONTRACTED ....................................................................................................................................... 5 4.5 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................... 5 4.6 TEST MODE ................................................................................................................................................ 6 5 TEST SUMMARY .................................................................................................................................................. 7 6 EQUIPMENT USED DURING TEST .................................................................................................................. 8 6.1 EQUIPMENTS LIST ...................................................................................................................................... 8 6.2 DESCRIPTION OF AUXILIARY EQUIPMENT .................................................................................................. 8 6.3 TEST EQUIPMENT CALIBRATION ................................................................................................................ 8 7 RF EXPOSURE ...................................................................................................................................................... 9 7.1 EUT OPERATION ........................................................................................................................................ 9 7.2 TEST SETUP ............................................................................................................................................... 9 7.3 FCC RULES .............................................................................................................................................. 10 7.4 TEST RESULT ........................................................................................................................................... 11 8 PHOTOGRAPHS OF TEST SETUP ................................................................................................................. 12 Reference No.: WTD26D01029212W002 Page 3 of 12 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 3 Revision History Test Report No. Date of Receipt Sample Date of Test Date of Issue Purpose CommentApproved WTD26D01029212W002 2026-03-23 2026-03-26 to 2026-04-09 2026-06-10Original - Valid Reference No.: WTD26D01029212W002 Page 4 of 12 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 4 General Information 4.1 General Description of E.U.T Product: Stay & Play Wireless Fence Model(s): RFA-554B, PIF-150, PIF00-15001 Model Description: Only the model names are different. Model RFA-554B was tested in the report. Test Sample No.: 1-1/1 Type of Modulation: Phase Frequency Range: 18.72 kHz Antenna installation: loop coil Antenna Hardware Version: 100-1456 Rev #002 Software Version: Ver 5.0 4.2 Details of accessories Ratings: DC 19V from AC Adapter AC Adapter: Model: NF19V-1.26C-DC Input: 100-240V~, 50/60Hz 0.8A Output: DC 19.0V, 1.26A 24.0W Reference No.: WTD26D01029212W002 Page 5 of 12 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 4.3 Test Facility The test facility has a test site registered with the following organizations: ISED CAB identifier: CN0…

Text truncated - open the document above for the full version.

NOTES: (UNLESS OTHERWISE SPECIFIED) 1. COPPER WIRE MUST BE EVENLY LAYER WOUND. DO NOT SCATTER WIND 2. L S = 1.029mH1% MEASURED AT 10KHz. (MIN = 1.019mH, MAX = 1.039mH) 3. DIRECTION OF WIND: START FROM BOTTOM HOLE THEN WIND IN THE CLOCKWISE DIRECTION. 4. WIRE MUST MEET INDUCTANCE SPECIFICATION. 50 TURNS IS NOMINAL. 5. WIRE SIZE: 26AWG POLYURETHANE COATED MAGNET WIRE. 6. PARTS TO MEET RSC GENERAL WORKMANSHIP REQUIREMENTS DOCUMENT 490-007 (LATEST REVISION). 7. PRIOR TO PRODUCTION OF THIS PART, RSC ENGINEERING MUST APPROVE A MINIMUM OF 10 SAMPLES. 8. CIRCLED DIMENSIONS, I.E., 5.0 , ARE CRITICAL DIMENSIONS AND SHALL BE CONSIDERED INSPECTION DIMENSIONS FOR PRODUCTION PARTS. 9. MUST MEET ALL REQUIREMENTS OF RoHS DIRECTIVE 2002/95/EC AS AMENDED. 127.00±1.50 216.00 REF. DIRECTION OF WIND 2X LEADS STRIPPED AND TINNED 9.5 1.0 100-243 1 700-3245 1 19.00 REF 203.20 REF. 900-038 1 START FINISH REVISION HISTORY REV.DESCRIPTIONDATESTATUSECOAPPROVER #00RELEASED FOR QUOTATION10/15/2012WorkingN/A JSPANGLER 000RELEASED FOR PRODUCTION10/5/2015RELEASEDN/A JSPANGLER C:\rsc_vault\SBU-CONTAINMENT\IF-100 RE-DESIGN\610-3218 DOCUMENT NAME: 490-503-4 ASM INDUCTOR IF-150 TRANSMITTER THIRD ANGLE PROJECTION CONTAINMENT AND AVOIDANCE EWARD 12/9/2004 THIS DRAWING IS THE PROPERTY OF AND PROPRIETARY TO RADIO SYSTEMS CORPORATION. THIS DRAWING AND THE INFORMATION CONTAINED HEREIN SHALL NOT BE REPRODUCED NOR DISCLOSED TO ANYONE EXCEPT THOSE REQUIRING ITS USE FOR RSC AUTHORIZED PURPOSES. THIS DOCUMENT SHALL BE DESTROYED OR RETURNED TO RSC WHEN NO LONGER REQUIRED FOR THESE PURPOSES. CHECK DATE: 10/5/2015 12/9/2004JSPANGLER UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS DESIGNED BY: DETAILED BY: CHECKER: RESPONSIBLE SBU: CREATION DATE: DETAILED DATE: TITLE: DRAWING NUMBER: SCALE: SHEET: SIZE: B Radio Systems Corporation 10427 PetSafe Way - Knoxville, TN 37932-3369 - (865)777-5404 610-3218 2:3 1 OF 1 JSPANGLER 0.5° 0.10 0.2 .XX .X TOLERANCES DECIMALS: ANGULAR:

Waltek Testing Group Co., Ltd. http://www.waltek.com.cn Page 1 of 25 TEST REPORT Reference No. .................... : WTD26D01029212W001 FCC ID ................................ : KE3-PIF150-2 Applicant ............................ : Radio Systems Corp Address .............................. : 10427 PetSafe Way, Knoxville, TN 37932 USA Manufac turer .................... : Radio Systems Corp Address .............................. : 10427 PetSafe Way, Knoxville, TN 37932 USA Product ............................... : Stay & Play Wireless Fence Model(s). ............................ : RFA-554B, PIF-150, PIF00-15001 Standards........................... : FCC 47CFR 15 Subpart C Date of Receipt Sample .... : 2026-03-23 Date of Test ....................... : 2026-03-26 to 2026-04-09 Date of Issue ...................... : 2026-06-10 Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group Co., Ltd. Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China Tel: +86-769-2267 6998 Fax: +86-769-2267 6828 Compiled by: Approved by: Frank Yin / Project Engineer Deval Qin / Designated Reviewer Reference No.: WTD26D01029212W001 Page 2 of 25 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 2 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 CONTENTS ............................................................................................................................................... 2 3 REVISION HISTORY ................................................................................................................................. 3 4 GENERAL INFORMATION ....................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF E.U.T ................................................................................................... 4 4.2 DETAILS OF ACCESSORIES ............................................................................................................... 4 4.3 TEST FACILITY ................................................................................................................................ 5 4.4 SUBCONTRACTED ........................................................................................................................... 5 4.5 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................ 5 4.6 TEST MODE .................................................................................................................................... 6 5 TEST SUMMARY ...................................................................................................................................... 7 6 EQUIPMENT USED DURING TEST ......................................................................................................... 8 6.1 EQUIPMENTS LIST ........................................................................................................................... 8 6.2 DESCRIPTION OF SUPPORT UNITS ................................................................................................... 9 6.3 MEASUREMENT UNCERTAINTY ......................................................................................................... 9 6.4 TEST EQUIPMENT CALIBRATION ....................................................................................................... 9 7 CONDUCTED EMISSION ....................................................................................................................... 10 7.1 EUT OPERATION .......................................................................................................................... 10 7.2 EUT SETUP .................................................................................................................................. 10 7.3 MEASUREMENT DESCRIPTION ........................................................................................................ 10 7.4 CONDUCTED EMISSION TEST RESULT ............................................................................................ 11 8 RADIATED SPURIOUS EMISSIONS ..................................................................................................... 13 8.1 EUT OPERATION .......................................................................................................................... 13 8.2 TEST SETUP ................................................................................................................................. 14 8.3 SPECTRUM ANALYZER SETUP ........................................................................................................ 15 8.4 TEST PROCEDURE ........................................................................................................................ 15 8.5 CORRECTED AMPLITUDE & MARGIN CALCULATION ......................................................................... 15 8.6 SUMMARY OF TEST RESULTS ........................................................................................................ 16 9 BANDWIDTH MEASUREMENT ............................................................................................................. 24 9.1 TEST PROCEDURE ........................................................................................................................ 24 9.2 TEST RESULT ............................................................................................................................... 24 10 ANTENNA REQUIREMENT .....................…

Text truncated - open the document above for the full version.

Appendix-RFA-554B-Photos Model RFA-554B, PIF-150, PIF00-15001 FCC ID: KE3-PIF150-2 Reference No.: WTD26D01029212W Page 1 of 10 1. Test Setup photos 1.1 Photograph – Radiated Emissions For 9kHz-30MHz Test Site 2# For 30MHz-1000MHz Test Site 2# Appendix-RFA-554B-Photos Model RFA-554B, PIF-150, PIF00-15001 FCC ID: KE3-PIF150-2 Reference No.: WTD26D01029212W Page 2 of 10 1.2 Photograph – RF Exposure