KE3-3001183INVISIBLE FENCE BRAND DOORMAN

Invisible Fence ® Brand Doorman ™ Electronic Pet Door Operating Guide Model Numbers: RAC00-13211 Please read this entire guide before operating. Important Safety Information Explanation of Attention Words and Symbols used in this guide This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. NOTICE is used to address safe use practices not related to personal injury. WARNING • When children are present in the home, it is important to consider the pet door during child proofing activities. The pet door may be misused by a child resulting in the child accessing potential hazards that may be on the other side of the pet door. • Purchasers/Homeowners with swimming pools should ensure that the pet door is monitored at all times and that the swimming pool has adequate barriers to entry. If a new hazard is created inside or outside of your home, which may be accessed through the pet door, Invisible Fence ® Brand recommends that you properly guard access to the hazard or remove the pet door. • The closing panel or lock, if applicable, is provided for aesthetic and energy efficiency purposes and is not intended as a security device. Invisible Fence ® Brand will not be liable for unintended use and the purchaser of this product accepts full responsibility for oversight of the opening it creates. CAUTION • The user, prior to installation, must become familiar with all building codes that may affect the installation of the pet door and determine, along with a licensed contractor, its suitability in a given installation. • This pet door is not a fire door. It is important for the owner and contractor to consider any risks that may be present inside or outside of the pet door, and any risks that may be created by subsequent changes to your property and how they may relate to the existence and use, including misuse of the pet door. NOTICE • Keep these instructions with important papers; be sure to transfer these instructions to the new owner of the property. • Unauthorized changes or modifications may void the user’s authority to operate this equipment, and void the warranty. Thank you for choosing the Invisible Fence ® Brand Doorman ™ . You and your pet deserve a companionship that includes memorable moments and a shared understanding together. Our products and training tools promote a lifestyle of protection, teaching, and love—essentials that influence memories for a lifetime. If you have any questions about our products or training your pet, please visit our website at www.invisiblefence.com or contact your local dealer. ______________________________________________________________________ Table of Contents How the Invisible Fence® Brand Doorman™ Electronic Pet Door Works Invisible Fence Doorman - Controls and Features 1.1 Input & Output Controls 1.2 Features XXXXX XXXXX XXXXX XXXXX XXXXX How the Invisible Fence ® Brand Doorman ™ Electronic Pet Door Works Using radio-frequency technology, the Invisible Fence ® Brand Doorman ™ Electronic Pet Door reads the Computer Collar ® SmartLink ™ II code and triggers a battery power- driven flap to unlock so your pet(s) can come and go as they please. When Invisible Fence ® Brand Doorman ™ Electronic Pet Door no longer senses your pets’ SmartLink ™ II code, the flap automatically locks back into place. The Invisible Fence ® Brand Doorman ™ Electronic Pet Door can detect up to five programmed SmartLink ™ II codes and also operates in two other modes: locked mode and unlocked mode. Components Invisible Fence ® Brand Doorman ™ - Controls and Features 1.1 Input & Output Controls Input: Push Buttons: There are 6 pushbutton switches available for a user to control the various functions and settings of the door. The buttons are shown below in Figure 1. Figure 1: Pushbuttons for Controlling Door Functionality Going from left-to-right, top-to-bottom, the buttons are called (1) Clock Set (2) Learn (3) Schedule (4) Down (5) Up (6) Lock/Unlock/Auto Wireless (RF): The pet door has the ability to receive wireless radio frequency (RF) signals. Some functions, such as the Learn function, utilizes wireless signals to read new transmit codes associated with the Computer Collar ® . Output LCD Display: The LCD Display is used to show various settings and information about the door. It is comprised of various LCD segments that can be activated or deactivated. These fields are black when turned-on and can’t be seen when turned-off. Figure 2 below shows all possible segments that may be on at any given time. Figure 2: LCD Display Upon power-up, all segments that are used will be turned-on for 1 second and then turned-off for 0.5 seconds. This feature is used to verify on and off functionality of all relevant LCD segments. Sound: The door contains a speaker that is capable of generating an audible tone. Signal Activation Technology: Technology that allows activation communication to occur between the pet door and the Computer Collar ® within an adjustable range area. 1.2 Features The Invisible Fence ® Brand Doorman ™ contains a variety of features and abilities that can be controlled and configured by users. By utilizing the pet door’s Input and Output Control capabilities a user may: ‐ Set the Clock ‐ Learn SmartLink ™ II Code(s) ‐ Display SmartLink ™ II Slots in Use ‐ Establish a Schedule ‐ Turn Scheduling On or Off ‐ Set Signal Activation Range ‐ Switch between Locked, Unlocked and Automatic modes ‐ Change frequencies settings between 7K and 10K ‐ Lock Pushbuttons to prevent tampering/adjustments ‐ View Low Battery Indicator. Setting the Clock: Upon powering-up the pet door, the LCD clock defaults to 12:00 AM. The clock…

Text truncated - open the document above for the full version.

Radio Systems Corp Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: KE3-3001183. Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Schematics Block Diagram Operational Description KE3-3001183_SCH.pdf KE3-3001183_BlockDiagram.pdf KE3-3001183_CircuitDescription.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, --------------------- Clifton P. Brick

Radio Systems Corporation FCC ID: KE3-3001183 POWER OF ATTORNEY December 5, 2011 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) on our behalf shall have the same effect as acts of our own. This authorization expires on December 4, 2012. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Radio Systems Corporation, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Radio Systems Corporation ------------------ Clifton P. Brick

2.1 EUT – Appearance View

Page:19 of 19 Radio Systems Corporation FCC ID: KE3-3001183 WALTEK SERVICES Reference No.: WT11116603-E-E-F 9 FCC Label This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)this device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation The Label must not be a stick-on paper. The Label on these products must be permanently affixed to the product and readily visible at the time of purchase and must last the expected lifetime of the equipment not be readily detachable. Proposed Label Location on EUT EUT Back View/proposed FCC Mark Location

FCC ID Label Sample for Model: RAC00-13211 FCC ID: KE3-3001183 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

2.1 EUT – Open View 2.2 EUT – PCB View

Page: 1 of 21 FCC TEST REPORT WALTEK SERVICES Reference No.: WT11126818-E-E-F FCC ID : KE3-3001183 Applicant : Radio Systems Corporation Address : 10427 Electric Ave. Knoxville, TN 37932, USA Equipment Under Test (EUT) : Product Name : Invisible Fence® Brand Doorman™ Model No. : RAC00-13211 Standards : FCC CFR47 Part 15 Section 15.109:2009 Date of Test : November 28 ~ December 1, 2011 Date of Issue : December 5, 2011 Test Engineer : Hunk yan / Engineer Reviewed By : Philo zhong / Manager Test Result : PASS Prepared By: Waltek Services (Shenzhen) Co., Ltd. 1/F, Fukangtai Building, West Baima Rd., Songgang Street, Baoan District, Shenzhen 518105, China Tel :+86-755-27553488 Fax:+86-755-27553868 — The sample detailed above has been tested to the requirements of Council Directives ANSI C63.4:2003. The test results have been reviewed against the Directives above and found to meet their essential requirements. Page:2 of 21 Radio Systems Corporation FCC ID: KE3-3001183 WALTEK SERVICES Reference No.: WT11126818-E-E-F 2 Test Summary Test Items Test Requirement Test Method Result Radiated Emissions (9kHz ~ 2GHz) Part 15.109 ANSI C63.4: 2003 PASS Conducted Emissions (150kHz ~ 30MHz) Part 15.107 ANSI C63.4:2003 N/A Page:3 of 21 Radio Systems Corporation FCC ID: KE3-3001183 WALTEK SERVICES Reference No.: WT11126818-E-E-F 3 Contents Page 1 COVER PAGE........................................................................................................................................................ 1 2 TEST SUMMARY .................................................................................................................................................. 2 3 CONTENTS............................................................................................................................................................. 3 4 GENERAL INFORMATION ................................................................................................................................ 4 4.1 CLIENT INFORMATION........................................................................................................................................... 4 4.2 GENERAL DESCRIPTION OF E.U.T. ........................................................................................................................ 4 4.3 DETAILS OF E.U.T................................................................................................................................................. 4 4.4 DESCRIPTION OF SUPPORT UNITS.......................................................................................................................... 4 4.5 STANDARDS APPLICABLE FOR TESTING................................................................................................................ 4 4.6 TEST FACILITY...................................................................................................................................................... 5 4.7 TEST LOCATION.................................................................................................................................................... 5 5 EQUIPMENT USED DURING TEST .................................................................................................................. 6 6 CONDUCTED EMISSIONS.................................................................................................................................. 7 6.1 E.U.T. OPERATION................................................................................................................................................ 7 6.2 EUT SETUP........................................................................................................................................................... 8 6.3 CONDUCTED EMISSION TEST RESULT................................................................................................................... 8 7 RADIATED EMISSIONS ...................................................................................................................................... 9 7.1 MEASUREMENT UNCERTAINTY........................................................................................................................... 10 7.2 EUT SETUP......................................................................................................................................................... 10 7.3 SPECTRUM ANALYZER SETUP............................................................................................................................. 11 7.4 TEST PROCEDURE................................................................................................................................................ 12 7.5 RADIATED EMISSIONS TEST RESULT................................................................................................................... 13 7.6 SUMMARY OF TEST RESULTS.............................................................................................................................. 13 7.7 PHOTOGRAPH – RADIATION EMISSION TEST SETUP............................................................................................ 17 8 PHOTOGRAPHS - CONSTRUCTIONAL DETAILS...................................................................................... 18 8.1 EUT – APPEARANCE VIEW................................................................................................................................. 18 8.2 EUT – OPEN VIEW.............................................................................................................................................. 19 8.3 EUT – PCB VIEW............................................................................................................................................... 20 9 FCC LABEL.......................................................................................................................................................... 21 Page:4 of 21 Radio Systems Corpora…

Text truncated - open the document above for the full version.

2.1 Photograph – Radiation Emission Test Setup Below 30MHz 30MHz ~ 1000MHz Above 1GHz