KE3-3003569Pro Wireless Dog Fence

User Guide 2 Draft for testing - not nal Wireless Dog Fence Pro Before we begin As you set up your new wireless fence, keep in mind: This product creates a wireless pet area for your dog to explore The Wireless Dog Fence Pro has three main parts: a base unit, a collar and boundary flags. The base unit sends out a radio signal in a 17- to 85-foot radius in all directions, creating an adjustable circular boundary zone around the allowed pet area. Your dog wears a collar that receives the signal from the base unit. As your dog nears the boundary zone, the collar vibrates and sounds a warning tone. If your dog continues past the boundary zone, the collar delivers a static and vibration correction to get their attention and prompt them to return to the pet area. You’ll place temporary boundary flags around the pet area to help your dog learn where the boundary zone is. After proper training, you will be able to remove the flags and allow your dog to roam freely within the pet area. Important: For important safety and warranty information, please see the Let us help! guide included with your product. 3 Draft for testing - not nal Adjust the base unit location to fit the boundary to your yard The base unit is the source of the radio signal and will always be at the exact center of the pet area. For optimal performance, it should be placed off the floor in your home, away from any large metal objects. You may need to move the base unit a few times before you find the best spot. It is important to keep your pet comfortable and safe Important: Avoid leaving the collar on your dog for more than 12 hours a day. Before beginning, please read this guide and the Let us help! guide (provided with the product) thoroughly for important safety information about how to fit and use the collar. Take care to choose the best correction level for your dog’s temperament. This product limits static correction duration to 15 seconds. To positively reinforce returning to the pet area, the collar is programmed with correction- free re-entry; if your dog leaves the pet area, they will not receive a static correction upon their return. Training time may vary from pet to pet Properly training your pet is essential to the success of the wireless fence. Please consult the training guide for our recommended training method. 4 Draft for testing - not nal Collar with short contact points What you have What you need • Scissors • Lighter • Non-metallic collar and leash (for training) Flags Long contact points Collar charging cable (USB-A) (USB-A adaptor not included) Test light tool Base unit Base unit power adaptor 5 Draft for testing - not nal Charge the collar 1 Connect the charging cable to the magnetic charging port on the back of the collar and then plug it into a USB-A outlet or adaptor (not included). Leave the collar plugged in until it is fully charged; this will take about 2 hours. The status light on the top of the collar will glow red when it is charging and will turn green once charging is complete. Each charge can last up to 3 weeks, depending upon frequency of use. 6 Draft for testing - not nal Turn the collar on 2 Turn the collar on by pressing the power button for 1 second. The collar will beep low to high and the status light will glow for 5 seconds (green, yellow or red) to indicate battery charge: Status light colorMeaning GreenThe battery level is sufficient (above 40%). YellowThe battery is low (below 40%); replace soon. Red The battery is critically low (below 20%); charge the collar. At the same time, the correction level lights across the top of the collar will illuminate for 5 seconds to indicate the current correction level. Power button 7 Draft for testing - not nal Set the correction level 3 The number of correction level lights illuminated indicates the current correction level: Number of lightsCorrection level 1Level 1: Tone/vibration only 2Level 2: Low static/vibration correction 3Level 3 4Level 4 5Level 5 6Level 6 7Level 7 8Level 8: High static/vibration correction To increase the correction level, press the power button once to view the current correction level, then press it again within 5 seconds. Each time you press the power button within 5 seconds of the previous press, the correction level increases by one. The levels increase up through level 8 and then start over at level 1. We recommend setting the correction to level 2 (low static/vibration) or higher during setup. This will allow you to use the test light tool when testing your boundary. Correction level lights 8 Draft for testing - not nal Choose a location for the base unit 4 The base unit will be the center of the pet area. Place the base unit: • Near a power outlet • On the ground level of your home • In a dry, well-ventilated area • At least 2 feet above the floor • On a non-metal table or other hard surface • At least 3 feet from any large metal objects (washing machine, water heater, etc.) DO NOT place it: • On a metal surface • In an area where temperatures go below 15 °F or above 104 °F Important: Placing the base unit in a metal building, shed, or home with a metal roof may reduce its maximum range. 3 feet 9 Draft for testing - not nal Turn the base unit on 5 Connect the power adaptor to the base unit and then plug it into a wall outlet. Slide the power switch to the on position. The light on the front of the base unit will glow blue when the base unit is powered on and functioning correctly. 1 2 3 Power switch ONOFF 10 Draft for testing - not nal Adjust the pet area radius 6 Next you will adjust the base unit’s range so the pet area lies within your desired boundaries and only covers areas that are permitted. The LCD screen on the back of the base unit displays how far the pet area radius extends in all directions. Use the + and - buttons to select the desired pet area radius: • The minimum radius is 17 feet. • The maximum radius is 85 feet (this creates a pet area of approximately 1/2 an acre, or 40% of an American foot…

Text truncated - open the document above for the full version.

Radio Systems Corp 2026-09-08 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for(FCC ID: KE3-3003569) [Radio Systems Corp] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, Printed Name: Jennifer Bleasdale Title: Regulatory Compliance Specialist Address: 10427 PetSafe Way, Knoxville, Tennessee 37932, United States Tel.: 865-321-1895 Email: [email protected] Radio Systems Corp (2026-09-08) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID: KE3-3003569) [Radio Systems Corp] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Printed Name: Jennifer Bleasdale Title: Regulatory Compliance Specialist Address: 10427 PetSafe Way, Knoxville, Tennessee 37932, United States Tel.: 865-321-1895 Email: [email protected]

2.911 (d)(7)USA Agent v1.5 Section 2.911(d)(7) USA Agent for Service of Process Company name: Radio Systems Corp Address: 10427 PetSafe Way, Knoxville, Tennessee 37932, United States Product Name: Pro Wireless Dog Fence FCC ID: KE3-3003569 2.911(d)(7) USA Designated Agent for Service of Process We, [Radio Systems Corp] (“the applicant”) designate [Radio Systems Corp] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. USA Agent& Applicant Company name: Radio Systems Corp Address: 10427 PetSafe Way, Knoxville, Tennessee 37932, United States FRN: 0014529481 Contact Name: Jennifer Bleasdale Telephone No: 865-321-1895 Email: [email protected] Signature: Title: Regulatory Compliance Specialist Date: 2026-09-08 2.911 (d)(7)USA Agent v1.5 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to -the-communications-supply-chain-through-the

Radio Systems Corp 2026-09-08 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR ( Pro Wireless Dog Fence/ FCC ID: KE3-3003569) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the •Schematics •Block diagram •Operation description required to be submitted with this application be permanently withheld from public review. These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Please contact me if there is any information you may need. Sincerely, Printed Name: Jennifer Bleasdale Title: Regulatory Compliance Specialist Address: 10427 PetSafe Way, Knoxville, Tennessee 37932, United States Tel.: 865-321-1895 Email: [email protected]

Radio Systems Corp 2026-09-08 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen ZKT Technology Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Printed Name: Jennifer Bleasdale Title: Regulatory Compliance Specialist Address: 10427 PetSafe Way, Knoxville, Tennessee 37932, United States Tel.: 865-321-1895 Email: [email protected]

Differences Description We Radio Systems Corp state: Product： Pro Wireless Dog Fence Model Name ： RFA-682, 300-3569, PIF00-18361, PIF00- 18363，ZIF00-18404 Trade Name: PetSafe The electrical circuit design, layout, components used and internal wiring for above models are identical, Only different in model name. Signature: Date: 2026-09-08 Name: Jennifer Bleasdale Title: Regulatory Compliance Specialist Company: Radio Systems Corp

EUTPHOTO(ExternalPhotos) Photo1 Photo2 EUTPHOTO(ExternalPhotos) Photo3 Photo4 EUTPHOTO(ExternalPhotos) Photo5 Photo6 EUTPHOTO(ExternalPhotos) Photo7 Photo8 EUTPHOTO(ExternalPhotos) ※※※※※ENDOFREPORT※※※※※ Photo9

300-3569 417-1843 MOD: RFA-682 FAB: Vietnam SN: 1111222222 CMWWYY FCC ID: KE3-3003569 Input: DC24V 1.5A Radio Systems Corporation petsafe.com

EUT PHOTO(External Photos) Photo 1 Photo 2 Antenna EUT PHOTO(External Photos) Photo 3 Photo 4 EUT PHOTO(External Photos) Photo 5 Photo 6 EUT PHOTO(External Photos) Photo 7 Photo 8 EUT PHOTO(External Photos) ※※※※※ END OF REPORT ※※※※※ Photo 9

ReportNo.:ZKT-260811L0681E-2 Page 1 of 10 RFEXPOSUREEVALUATION FCCID:KE3-3003569 ReportNumber. .................................. : ZKT-260811L0681E-2 DateofTest.......................................................:July10,2026~Aug.22,2026 Dateofissue.........................................:Aug.22,2026 Totalnumberofpages .......................... 10 TestResult..........................................: PASS TestingLaboratory............................: ShenzhenZKTTechnologyCo.,Ltd. Address ............................................... : 1/F,No.101,BuildingB,No.6,TangweiCommunityIndustrialAvenue, FuhaiStreet,Bao'anDistrict,Shenzhen,China Applicant'sname.............................: RadioSystemsCorp Address...............................................: 10427PetSafeWay,Knoxville,TN37932,USA Manufacturer'sname......................: RadioSystemsCorp Address...............................................: 10427PetSafeWay,Knoxville,TN37932,USA Testspecification: Standard ................................................ :KDB680106D01 Testprocedure.....................................: / Non-standardtestmethod................:N/A TestReportFormNo. ....................... : TRF-EL-111_V0 TestReportForm(s)Originator ..... : ZKTTesting MasterTRF........................................: Dated:2020-01-06 ThisdevicedescribedabovehasbeentestedbyZKT,andthetestresultsshowthattheequipmentundertest (EUT)isincompliancewiththeFCCrequirements.Anditisapplicableonlytothetestedsampleidentifiedin thereport. Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofZKT,thisdocumentmaybe alteredorrevisedbyZKT,personalonly,andshallbenotedintherevisionofthedocument. Productname.....................................:ProWirelessDogFence Trademark ........................................... :PetSafe Model/Typereference.........................:RFA-682 300-3569,PIF00-18361,PIF00-18363，ZIF00-18404 Ratings..................................................:Input:24V⎓1.5A ReportNo.:ZKT-260811L0681E-2 Page 2 of 10 Testingprocedureandtestinglocation: TestingLaboratory.......................................:ShenzhenZKTTechnologyCo.,Ltd. Address............................................................:1/F,No.101,BuildingB,No.6,TangweiCommunity IndustrialAvenue,FuhaiStreet,Bao'anDistrict, Shenzhen,China JimLiu Testedby(name+signature).......................: JacksonFang Reviewer(name+signature) ....................... : LakeXie Approved(name+signature).......................: ReportNo.:ZKT-260811L0681E-2 Page 3 of 10 TABLEOFCONTENTS 1.VERSION.......................................................................................................................................................4 2.TESTFACILITY.............................................................................................................................................5 3.GENERALDESCRIPTIONOFEUT..............................................................................................................6 ReportNo.:ZKT-260811L0681E-2 Page 4 of 10 1.Version ReportNo.VersionDescriptionApproved ZKT-260811L0681E-2Rev.01InitialissueofreportAug.22,2026 ReportNo.:ZKT-260811L0681E-2 Page 5 of 10 2.TESTFACILITY ShenzhenZKTTechnologyCo.,Ltd. Add.:1/F,No.101,BuildingB,No.6,TangweiCommunityIndustrialAvenue,FuhaiStreet,Bao'an District,Shenzhen,China FCCTestFirmRegistrationNumber:927491 DesignationNumber:CN1431 ICRegisteredNo.:27033 CABidentifier:CN0110 ReportNo.:ZKT-260811L0681E-2 Page 6 of 10 3.GENERALDESCRIPTIONOFEUT ProductName:ProWirelessDogFence ModelNo.:RFA-682 SerialNo.: 300-3569,PIF00-18361,PIF00-18363，ZIF00-18404 ModelDifference:Onlythenameoftheproductisdifferent. HardwareVersion:REV5 SoftwareVersion:REV1.0 SampleNumber:260811L0681-1 OperationFrequency:18.72KHz ModulationType:Phase AntennaType:203mmdiameteraircoil AntennaGain:0dBi Ratings: Input:24V ⎓ 1.5A ReportNo.:ZKT-260811L0681E-2 Page 7 of 10 EUTmodeofoperationbeforefolding: TestModes:Description: Mode1TXMode 1.MeasuringStandard 1.1Accordingto§1.1307(b)(1),systemsoperatingundertheprovisionsofthissectionshallbeoperatedina mannerthatensuresthatthepublicisnotexposedtoradiofrequencyenergylevelinexcessofthe Commission’sguidelines.Accordingto§1.1310and§2.1091RFexposureiscalculated.According KDB680106D01WirelessPowerTransferv04. 1.2MEASUREMENTUNCERTAINTY Thereporteduncertaintyofmeasurementy±U,whereexpendeduncertaintyUisbasedona standarduncertaintymultipliedbyacoveragefactorofk=2,providingalevelofconfidenceof approximately95%. No.ItemUncertainly 1H-filed±0.93dB 2E-filed±0.51dB 2.1Requirements $1.1310:Thecriterialistedinthefollowingtableshallbeusedtoevaluatetheenvironmentimpactofhuman exposuretoradiofrequency(RF)radiationasspecifiedin$1.1307(b),exceptinthecaseofportabledevices whichshallbeevaluatedaccordingtotheprovisionsofFCCpart2.1093ofthischapter. ReportNo.:ZKT-260811L0681E-2 Page 8 of 10 2.2Limits Thecriterialistedinthefollowingtableshallbeusedtoevaluatetheenvironmentimpactofhumanexposure toradiofrequency(RF)radiationasspecifiedin1.1307(b) LimitsforMaximumPermissibleExposure(MPE): 2.3TestSetup ReportNo.:ZKT-260811L0681E-2 Page 9 of 10 3TestProcedure 1)TheRFexposuretestwasperformedon360degreeturntableinanechoicchamber. 2)Themeasurementprobewasplacedattestdistance(20cmandabovefromallsidesandTop)whichis betweentheedgeofthechargerandthegeometriccentreofprobe. 3)Theturntablewasrotated360ddegreetosearchofhigheststrength. 4)Thehighestemissionlevelwasrecordedandcomparedwithlimitassoonasmeasurementofeachpoints werecompleted. 5)TheEUTweremeasuredaccordingtothedictatesofKDB680106D01V04. 4.1TestInstrumentslist TestEquipmentManufacturerModelNo.SN. Cal.Date (mm-dd-yy) Cal.Duedate (mm-dd-yy) ExposureLevelTesterNardaELT-400180ZX10220Sep.29,2025Sep.28,2026 Magneticfieldprobe 100cm 2 NardaELTprobe100cm 2 M0675Sep.29,2025Sep.28,2026 4.2Test*auxiliaryequipment.list* ItemEquipmentMfr/BrandModel/TypeNo.Note E-1AdapterSOY650-1411N/A ItemShieldedTypeFerriteCoreLengthNote N/AN/AN/AN/AN/A ReportNo.:ZKT-260811L06…

Text truncated - open the document above for the full version.

AntennaSpecification AntennaModel:97mmdiameteraircoil AntennaMatchingHostDevice:RFA-682PetContainmentWireless Manufacturer:SugaElectronics(Dongguan)CO.,LTD. Address:SugaHigh-techIndustrialPark,No8,FulongRoad, Sanzhong,QingxiTown,Dongguan,GuangdongTransmitterDocument Version:V1.0 1.Overview 1.1PurposeofPreparation Thisspecificationdefinesanddescribesthemagneticfieldtransmitting performance,mechanicalstructure,assemblyrequirements,operating environmentandinspectioncriteriaoftheRFA-682triaxialorthogonal magneticfieldtransmittingcoilantenna.Itservesastheofficialtechnicalbasis forantennaproduction,incomingmaterialinspection,completemachine assemblyandFCCcertificationtesting. 1.2ScopeofApplication ThistriaxialorthogonalcoilantennaismatchedwiththeRFA-682low- frequencymagneticfieldwirelesscontainmenttransmitter.Theequipmentis appliedtopetboundaryisolationsystems,whichdemarcateactivity boundariesbyemittinglow-frequencyalternatingmagneticfields,andthe matchedwearablereceiverwornbypetsidentifiesrelativepositions.This antennaonlyradiateslow-frequencymagneticfield(H-field)andbelongstoa near-fieldinductioncoil.ConventionalRFantennametricssuchasantenna gainandfar-fieldradiationindicatorsarenotapplicable. 1.3BriefDescriptionofProductOperatingPrinciple Theantennaconsistsofthreemutuallyperpendicularindependentcoils (X/Y/Zaxes).Theon-boardASICchipgeneratesthreepathsofphase- controlled18.72kHzPWMdrivingsignalstodrivethetriaxialcoilsto simultaneouslyproduceorthogonalalternatingmagneticfields.Thereceiver collectsthecompositemagneticfieldsignalsofthethreeaxestojudge whetheritisinsideoroutsidethecontainmentboundary.Thesystemadopts BPSKmodulationandisequippedwithaclosed-loopcurrentfeedbackcircuit toensurestablemagneticfieldintensityoutputfromthecoils. 2.Structure&Dimensions 2.1StructureDescription TheantennaisintegrallycomposedofX-axiscoil,Y-axiscoil,Z-axiscoil,coil fixingframeandleadterminals: 1.Triaxialinductioncoils:Woundwithmultipleturnsofenameledcopperwire;the threesetsofcoilsareassembledorthogonallyperpendiculartoeachother. 2.Supportingframe:Integrallyformedinsulatingflame-retardantplasticbracket, whichlimitsandfixesthethreesetsofcoilstoensurethe90°orthogonalangle ofthethreeaxeswithoutoffset. 3.Resonancematchingcomponents:Couplingcapacitorsandcurrent-sense transformersarecorrespondingtoeachcoiltoformasingle-channelLC resonantnetwork. 4.Outputleads:Eachsetofcoilsisindependentlyledoutwithtwowires,which areconnectedtothehalf-bridgedriveoutputportsofthemainboard respectively. 5.Samplingcomponents:Eachcoilchannelisequippedwithanindependent current-sensetransformerforclosed-loopcurrentfeedback. 2.2StructuralDimensionDescription 3.BillofMaterials Component Name MaterialUsed MaterialStandard/Performance Requirement X/Y/ZTriaxial WindingCoils Oxygen-freeCopper EnameledMagnetWire Hightemperatureresistant insulatinglayer,resistanttohigh- frequencyalternatingcurrent,low riskofinter-turnshortcircuit CoilFixing Frame Flame-retardantABS Plastic UL94-V0flameretardantgrade, non-magneticinsulationmaterial Component Name MaterialUsed MaterialStandard/Performance Requirement toavoidmagneticfieldshielding Resonance Coupling Capacitor High-frequencyFilm Capacitor Suitablefor18.72kHzlow- frequencyresonance,low temperaturedrift Current-sense Transformer Manganese-ZincFerrite Core+Enameled Winding Highmagneticpermeabilitycore, highprecisionforlow-frequency currentsampling CoilLeadWires High-temperature ResistantMulti-strand InsulatedWire Goodbendingresistance,resistant tobreakageaftersoldering Insulating Auxiliary Materials PETInsulatingTape Isolatecoilsfrommetalhousings topreventelectricleakageand shortcircuits 4.InstallationGuidelines 4.1InstallationPosition&Orientation 1.InstalltheentireantennainthecenteroftheinnercavityoftheRFA-682 transmitter;avoidlarge-areametalshieldingontheequipmenthousing. 2.Reserveanon-metallicbufferareaaroundtheinstallationposition.Metal housingsandmetalbracketswillshieldlow-frequencymagneticfieldsand greatlyreducetheeffectivecontainmentrange. 3.Ensuretheorthogonalangleofthetriaxialcoilsdoesnotdeformduring assembly;fullyfastentheframebucklestopreventdisplacementcausedby vibrationduringtransportation.

ReportNo.:ZKT-260811L0681E-1 Page1of27 FCCTESTREPORT FCCID:KE3-3003569 ReportNumber.....................................: ZKT-260811L0681E-1 DateofTest ....................................................... :July10,2026~Aug.22,2026 Dateofissue.........................................:Aug.22,2026 Totalnumberofpages .......................... 27 TestResult .......................................... : PASS TestingLaboratory. ........................... : ShenzhenZKTTechnologyCo.,Ltd. Address...............................................: 1/F,No.101,BuildingB,No.6,TangweiCommunityIndustrialAvenue, FuhaiStreet,Bao'anDistrict,Shenzhen,China Applicant'sname.............................: RadioSystemsCorp Address...............................................: 10427PetSafeWay,Knoxville,TN37932,USA Manufacturer'sname......................: RadioSystemsCorp Address ............................................... : 10427PetSafeWay,Knoxville,TN37932,USA Testspecification: Standard................................................:FCCCFRTitle47Part15SubpartCSection15.C Testprocedure.....................................: / Non-standardtestmethod ................ :N/A TestReportFormNo........................: TRF-EL-111_V0 TestReportForm(s)Originator.....: ZKTTesting MasterTRF........................................: Dated:2020-01-06 ThisdevicedescribedabovehasbeentestedbyZKT,andthetestresultsshowthattheequipmentundertest (EUT)isincompliancewiththeFCCrequirements.Anditisapplicableonlytothetestedsampleidentifiedin thereport. Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofZKT,thisdocumentmaybe alteredorrevisedbyZKT,personalonly,andshallbenotedintherevisionofthedocument. Productname.....................................:ProWirelessDogFence Trademark ........................................... :PetSafe Model/Typereference.........................:RFA-682 300-3569,PIF00-18361,PIF00-18363，ZIF00-18404 Ratings .................................................. :Input:24V ⎓ 1.5A ReportNo.:ZKT-260811L0681E-1 Page2of27 Testingprocedureandtestinglocation: TestingLaboratory ....................................... : ShenzhenZKTTechnologyCo.,Ltd. Address ............................................................ :1/F,No.101,BuildingB,No.6,TangweiCommunity IndustrialAvenue,FuhaiStreet,Bao'anDistrict, Shenzhen,China JimLiu Testedby(name+signature) ....................... : JacksonFang Reviewer(name+signature) ....................... : LakeXie Approved(name+signature) ....................... : ReportNo.:ZKT-260811L0681E-1 Page3of27 TABLEOFCONTENTS 1.VERSION.......................................................................................................................................................................4 2.TESTSUMMARY.........................................................................................................................................................5 2.1TESTFACILITY.....................................................................................................................................................6 2.2MEASUREMENTUNCERTAINTY.....................................................................................................................6 3.GENERALINFORMATION........................................................................................................................................7 3.1GENERALDESCRIPTIONOFEUT...................................................................................................................7 3.2TESTMODE...........................................................................................................................................................8 3.3BLOCKDIAGRAMOFEUTCONFIGURATION..............................................................................................8 3.4TESTCONDITIONS..............................................................................................................................................9 3.5DESCRIPTIONOFSUPPORTUNITS(CONDUCTEDMODE)....................................................................9 3.6EQUIPMENTSLISTFORALLTESTITEMS..................................................................................................10 4.CONDUCTEDEMISSIONTEST.............................................................................................................................11 4.1CONDUCTEDEMISSIONMEASUREMENT..................................................................................................11 4.1.1POWERLINECONDUCTEDEMISSIONLimits.........................................................................................11 4.1.2TESTPROCEDURE........................................................................................................................................11 4.1.3DEVIATIONFROMTESTSTANDARD........................................................................................................11 4.1.4TESTSETUP....................................................................................................................................................12 4.1.5EUTOPERATINGCONDITIONS..................................................................................................................12 4.1.6TESTRESULT..................................................................................................................................................13 5.RADIATEDEMISSIONMEASUREMENT.............................................................................................................15 5.1RADIATEDEMISSIONLIMITS.........................................................................................................................15 5.2ANECHOICCHAMBERTESTSETUPDIAGRAM........................................................................................16 5.3TESTPROCEDURE...........................................................................................................................................17 5.4…

Text truncated - open the document above for the full version.

EUT TEST PHOTO AC Conduction RE (9KHz-30MHz) RE (Below 1GHz) MPE ※※※※※ END OF REPORT ※※※※※