KE3-PIF150PETSAFE PREMIUM WIRELESS FENCE TRANSMITTER

1. Set Up the Transmitter Your system creates a circular pet area up to • 180 feet across. Place the transmitter at the center of your planned • area; set it indoors, at least 2 feet above the fl oor. Apply power, set the Boundary Switch to “HIGH” • and the Control Dial to “8”. 2. Prepare the Receiver Collar Insert RFA-67 battery (included). Turn • clockwise to turn ON. Set the static correction level following • instructions in this Operating & Training Guide. 3. Adjust the Pet Area Walk to the edge of the desired pet area.• Hold the Receiver Collar at your pet’s neck • height, with the PetSafe ® logo side facing away from transmitter. Have a helper turn the boundary control dial • slowly, down from “8”. When the Receiver Collar starts to beep, have • your helper stop turning the dial. Check all limits of your pet boundary and have • the helper adjust the dial as necessary. 4. Place the Boundary Flags Hold the Receiver Collar at your pet’s neck• height, with the PetSafe ® logo side facing away from transmitter. Walk to the edge of your boundary.• When the Receiver Collar starts to beep, place • a fl ag in the ground. Repeat this until Boundary Zone is marked • with fl ags about every 10 feet. 5. Fit the Receiver Collar and Train Your Dog Follow the collar fi tting instructions carefully.• Be patient when training your pet.• Quick Set-up Wireless Pet Containment System ® Please read this entire Operating & Training Guide before beginning. B o u n d a r y Z o n e Pet Area Pet Area STREET Proper Positioning of the Transmitter 2–4 feet above floor Table or shelf with a non-metallic surface which is 2-4 feet above the floor. (Transmitter may also be hung on the wall 2–4 feet above the floor.) 2 1-800-732-2677 Thank you for choosing PetSafe ® , the best selling brand of electronic training solutions in the world. Our mission is to be the most trusted brand in the pet ownership experience. We want to ensure your pet’s safety by providing you with the tools and techniques to successfully train your pet. If you have any questions, please contact the Customer Care Center at 1-800-732-2677 or visit our website at www.petsafe.net. To get the most protection out of your warranty, please register your product within 30 days at www.petsafe.net. By registering and keeping your receipt, you will enjoy the product’s full warranty and should you ever need to call the Customer Care Center, we will be able to help you faster. Most importantly, PetSafe ® will never give or sell your valuable information to anyone. Complete warranty information is available online at www.petsafe.net. Table of Contents Components ............................................................................................................. 3 Other Items You May Need ........................................................................................ 3 How the System Works .............................................................................................. 4 Key Defi nitions ......................................................................................................... 4 Operating Guide ..................................................................................................... 5 Set Up the Transmitter ............................................................................................ 5 Prepare the Receiver Collar ..................................................................................... 5 Battery Contact Verifi cation ..................................................................................... 6 Adjust the Pet Area to Desired Size .......................................................................... 7 Transmitter Range Chart ......................................................................................... 7 Re-synchronize the System ...................................................................................... 8 Place the Boundary Flags ........................................................................................ 8 Fit the Receiver Collar ............................................................................................ 8 Training Guide ..................................................................................................... 10 Be Patient With Your Pet ........................................................................................ 10 Day 1 - Boundary Awareness ................................................................................. 10 Days 2 thru 4 - Continue Boundary Awareness ...................................................... 11 Days 5 thru 8 - Distraction Phase .......................................................................... 11 Days 9 thru 14 - Unleashed Supervision ................................................................ 12 Days 15 thru 30 - Pet Monitoring .......................................................................... 12 Taking Your Pet Out of the Pet Area ......................................................................... 12 Wireless - To - Go ................................................................................................... 13 Accessories ............................................................................................................. 13 Frequently Asked Questions ................................................................................ 13 Troubleshooting .................................................................................................... 15 Test Light Instructions ............................................................................................ 16 Terms of Use and Limitation of Liability ................................................................. 16 Compliance ............................................................................................................ 17 Customer Care International ................................................................................... 17 …

Text truncated - open the document above for the full version.

10427 PetSafe Way Knoxville, TN. 37932 865-777-5404 www.petsafe.net Date: April 16, 2013 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: KE3-PIF150 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Schematics SCH.pdf Block Diagram BlockDiagram.pdf Circuit Description CircuitDescription.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Radio Systems Corporation .................................................................. [signature] Cindy Allen/Product Safety and Regulatory Specialist .................................................................. [typed name and title]

10427 PetSafe Way Knoxville, TN. 37932 865-777-5404 www.petsafe.net FCC ID: KE3-PIF150 POWER OF ATTORNEY April 15, 2013 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) on our behalf shall have the same effect as acts of our own. This authorization expires on April 14,2014 This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Radio Systems Corporation, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Radio Systems Corporation .................................................................................... [signature] Cindy Allen/Product Safety and Regulatory Specialist .................................................................................... [typed name and title]

Reference No.: WTS13S0302215E Page 17 of 22 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 9 Photographs - Constructional Details 9.1 EUT – Appearance View Reference No.: WTS13S0302215E Page 18 of 22 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Radio Systems Corporation FCC ID: KE3‐PIF150 IC ID: 2721A‐PIF150 Model: PIF‐150 Label Location

Reference No.: WTS13S0302215E Page 1 of 22 FCC TEST REPORT Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn FCC ID : KE3-PIF150 Applicant : Radio Systems Corporation Address : 10427 Petsafe Way Knoxville,TN 37932 United States Manufacturer : Radio Systems Corporation Address : 10427 Petsafe Way Knoxville,TN 37932 United States Equipment Under Test (EUT) : Product Name : PetSafe Premium Wireless Fence Transmitter Model No. : PIF-150 Rule : FCC CFR47 Part 15 Section 15.209:2010 Date of Test : March 29 ~ 30, 2013 Date of Issue : April 10, 2013 Test Result : Pass * Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Services (Shenzhen) Co., Ltd. Address: 1/F., Fukangtai Building, West Baima Road, Songgang Street, Baoan District, Shenzhen, Guangdong, China Testing location: 1/F., Fukangtai Building, West Baima Road, Songgang Street, Baoan District, Shenzhen, Guangdong, China Tel :+86-755-83551033 Fax:+86-755-83552400 Compiled by: Approved by: Zero Zhou / Project Engineer Philo Zhong / Manager Reference No.: WTS13S0302215E Page 2 of 22 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 2 Test Summary Test Items Test Requirement Test Method Result Conducted Emissions Part 15.207 ANSI C63.4:2003 PASS Radiated Emissions Part 15.209 ANSI C63.4: 2003 PASS Remark: PASS Test item meets the requirement FAIL Test item does not meet the requirement N/A Test case does not apply to the test object Reference No.: WTS13S0302215E Page 3 of 22 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 3 Contents Page 1 COVER PAGE..................................................................................................................................................... 1 2 TEST SUMMARY ............................................................................................................................................... 2 3 CONTENTS ......................................................................................................................................................... 3 4 GENERAL INFORMATION ............................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF E.U.T. ............................................................................................................. 4 4.2 DETAILS OF E.U.T. ...................................................................................................................................... 4 4.3 TEST FACILITY .............................................................................................................................................. 4 4.4 TEST LOCATION ........................................................................................................................................... 4 5 EQUIPMENT USED DURING TEST................................................................................................................ 5 5.1 EQUIPMENTS LIST ........................................................................................................................................ 5 5.2 MEASUREMENT UNCERTAINTY .................................................................................................................... 5 5.3 TEST EQUIPMENT CALIBRATION .................................................................................................................. 5 6 CONDUCTED EMISSIONS ............................................................................................................................... 6 6.1 E.U.T. OPERATION ...................................................................................................................................... 6 6.2 TEST PROCEDURE ....................................................................................................................................... 6 6.3 TEST SETUP ................................................................................................................................................. 6 6.4 TEST RESULT ............................................................................................................................................... 7 7 RADIATED EMISSIONS .................................................................................................................................... 9 7.1 EUT OPERATION ......................................................................................................................................... 9 7.2 TEST PROCEDURE ..................................................................................................................................... 10 7.3 TEST SETUP ............................................................................................................................................... 11 7.4 SPECTRUM ANALYZER SETUP ................................................................................................................... 12 7.5 CORRECTED AMPLITUDE & MARGIN CALCULATION .................................................................................. 12 7.6 TEST RESULTS ........................................................................................................................................... 12 8 PHOTOGRAPHS–TEST SETUP .................................................................................................................... 15 8.1 PHOTOGRAPH –CONDUCTED EMISSIONS TEST SETUP ............................................................................ 15 8.2 PHOTOGRAPH – RADIATION EMISSIONS TEST SETUP .............................................................................. 15 9 PHOTOGRAPHS - CONSTRUCTIONAL DETAILS ..............…

Text truncated - open the document above for the full version.

Reference No.: WTS13S0302215E Page 15 of 22 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 8 Photographs–Test Setup 8.1 Photograph –Conducted Emissions Test Setup 8.2 Photograph – Radiation Emissions Test Setup Below 30MHz Reference No.: WTS13S0302215E Page 16 of 22 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Above 30MHz